configuration for Freescale TWRK60N512 board

Based on the K40/Kwikstik config files

Change-Id: Icb3adc7126bacea65209b712ebaa0eb3b894372e
Signed-off-by: Tomas Frydrych <tomas@sleepfive.com>
Reviewed-on: http://openocd.zylin.com/210
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/tcl/board/twr-k60n512.cfg b/tcl/board/twr-k60n512.cfg
new file mode 100644 (file)
index 0000000..00cf042
--- /dev/null
+++ b/tcl/board/twr-k60n512.cfg
@@ -0,0 +1,12 @@
+#
+# Freescale KwikStik development board
+#
+
+source [find target/k60.cfg]
+
+reset_config trst_and_srst
+
+#
+# Bank definition for the 'program flash' (instructions and/or data)
+#
+flash bank pflash.pflash kinetis 0x00000000 0x80000 0 4 $_TARGETNAME

diff --git a/tcl/target/k60.cfg b/tcl/target/k60.cfg
new file mode 100644 (file)
index 0000000..d1247f3
--- /dev/null
+++ b/tcl/target/k60.cfg
@@ -0,0 +1,35 @@
+#
+# Freescale Kinetis K60 devices
+#
+
+#
+# K60 devices support both JTAG and SWD transports.
+#
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+    set _CHIPNAME $CHIPNAME
+} else {
+    set _CHIPNAME k60
+}
+
+if { [info exists ENDIAN] } {
+    set _ENDIAN $ENDIAN
+} else {
+    set _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {
+    set _CPUTAPID $CPUTAPID
+} else {
+    set _CPUTAPID 0x4ba00477
+}
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu
+
+$_CHIPNAME.cpu configure -event examine-start { puts "START..." ; }
+$_CHIPNAME.cpu configure -event examine-end { puts "END..." ; }