stm32f2x: Fix sector numbering for dual bank flash erase

Reference: RM0090 rev 5.

Change-Id: I9f7ae09c0ba91d166aebcdc25300d0ca58a5a56d
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reported-by: Nader Shehayed <nshehayed@gmail.com>
Reviewed-on: http://openocd.zylin.com/1689
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/src/flash/nor/stm32f2x.c b/src/flash/nor/stm32f2x.c
index de11b377572119d24630b2f622361b8a832fa81f..a7aba2b3bd98190d1b13cb0a08b46b89d836a9b9 100644 (file)
--- a/src/flash/nor/stm32f2x.c
+++ b/src/flash/nor/stm32f2x.c
@@ -111,7 +111,9 @@
 #define FLASH_PSIZE_16 (1 << 8)
 #define FLASH_PSIZE_32 (2 << 8)
 #define FLASH_PSIZE_64 (3 << 8)
-#define FLASH_SNB(a)   ((a) << 3)
+/* The sector number encoding is not straight binary for dual bank flash.
+ * Warning: evaluates the argument multiple times */
+#define FLASH_SNB(a)   ((((a) >= 12) ? 0x10 | ((a) - 12) : (a)) << 3)
 #define FLASH_LOCK     (1 << 31)
 
 /* FLASH_SR register bits */
@@ -403,6 +405,9 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last)
        struct target *target = bank->target;
        int i;
 
+       assert(first < bank->num_sectors);
+       assert(last < bank->num_sectors);
+
        if (bank->target->state != TARGET_HALTED) {
                LOG_ERROR("Target not halted");
                return ERROR_TARGET_NOT_HALTED;
@@ -418,7 +423,7 @@ static int stm32x_erase(struct flash_bank *bank, int first, int last)
        To erase a sector, follow the procedure below:
        1. Check that no Flash memory operation is ongoing by checking the BSY bit in the
          FLASH_SR register
-       2. Set the SER bit and select the sector (out of the 12 sectors in the main memory block)
+       2. Set the SER bit and select the sector
          you wish to erase (SNB) in the FLASH_CR register
        3. Set the STRT bit in the FLASH_CR register
        4. Wait for the BSY bit to be cleared