dcr->jcr = jcr;
if (dev) {
if (jcr) {
- jcr->dcr = dcr;
+ jcr->dcr = dcr;
}
dcr->dev = dev;
dcr->device = dev->device;
dcr->max_job_spool_size = dev->device->max_job_spool_size;
/* Attach this dcr only if dev is initialized */
if (dev->fd != 0 && jcr && jcr->JobType != JT_SYSTEM) {
- dev->attached_dcrs->append(dcr); /* attach dcr to device */
-// jcr->dcrs->append(dcr); /* put dcr in list for Job */
+ dev->attached_dcrs->append(dcr); /* attach dcr to device */
+// jcr->dcrs->append(dcr); /* put dcr in list for Job */
}
}
dcr->spool_fd = -1;
DCR *ldcr;
int num = jcr->dcrs->size();
for (i=0; i < num; i++) {
- ldcr = (DCR *)jcr->dcrs->get(i);
- if (ldcr == dcr) {
- jcr->dcrs->remove(i);
- if (jcr->dcr == dcr) {
- jcr->dcr = NULL;
- }
- }
+ ldcr = (DCR *)jcr->dcrs->get(i);
+ if (ldcr == dcr) {
+ jcr->dcrs->remove(i);
+ if (jcr->dcr == dcr) {
+ jcr->dcr = NULL;
+ }
+ }
}
}
}
dcr->reserved_device = false;
if (dev->num_writers < 0) {
Jmsg1(dcr->jcr, M_ERROR, 0, _("Hey! num_writers=%d!!!!\n"), dev->num_writers);
- dev->num_writers = 0;
+ dev->num_writers = 0;
}
unlock_device(dev);
}
/* Detach this dcr only if the dev is initialized */
if (dev->fd != 0 && jcr && jcr->JobType != JT_SYSTEM) {
- dev->attached_dcrs->remove(dcr); /* detach dcr from device */
+ dev->attached_dcrs->remove(dcr); /* detach dcr from device */
// remove_dcr_from_dcrs(dcr); /* remove dcr from jcr list */
}
if (dcr->block) {
if (dcr->jcr) {
dcr->jcr->dcr = NULL;
}
- free_unused_volume(dcr); /* free unused vols attached to this dcr */
+ free_unused_volume(dcr); /* free unused vols attached to this dcr */
free(dcr);
}
* leave the block pointers just after the label.
*
* Returns: NULL if failed for any reason
- * dcr if successful
+ * dcr if successful
*/
DCR *acquire_device_for_read(DCR *dcr)
{
if (dev->num_writers > 0) {
Jmsg2(jcr, M_FATAL, 0, _("Num_writers=%d not zero. Job %d canceled.\n"),
- dev->num_writers, jcr->JobId);
+ dev->num_writers, jcr->JobId);
goto get_out;
}
vol = vol->next;
}
if (!vol) {
- goto get_out; /* should not happen */
+ goto get_out; /* should not happen */
}
bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
init_device_wait_timers(dcr);
tape_previously_mounted = dev->can_read() || dev->can_append() ||
- dev->is_labeled();
+ dev->is_labeled();
tape_initially_mounted = tape_previously_mounted;
}
for (i=0; i<5; i++) {
- dev->clear_labeled(); /* force reread of label */
+ dev->clear_labeled(); /* force reread of label */
if (job_canceled(jcr)) {
Mmsg1(dev->errmsg, _("Job %d canceled.\n"), jcr->JobId);
- goto get_out; /* error return */
+ goto get_out; /* error return */
}
/*
* This code ensures that the device is ready for
*/
Dmsg1(100, "bstored: open vol=%s\n", dcr->VolumeName);
if (dev->open(dcr, OPEN_READ_ONLY) < 0) {
- if (dev->dev_errno == EIO) { /* no tape loaded */
+ if (dev->dev_errno == EIO) { /* no tape loaded */
Jmsg3(jcr, M_WARNING, 0, _("Open device %s Volume \"%s\" failed (EIO): ERR=%s\n"),
- dev->print_name(), dcr->VolumeName, strerror_dev(dev));
- goto default_path;
- }
-
+ dev->print_name(), dcr->VolumeName, strerror_dev(dev));
+ goto default_path;
+ }
+
#ifdef xxx_needed
- /* If we have a dvd that requires mount,
- * we need to try to open the label, so the info can be reported
- * if a wrong volume has been mounted.
- */
- if (dev->is_dvd() && (dcr->VolCatInfo.VolCatParts > 0)) {
- break;
- }
+ /* If we have a dvd that requires mount,
+ * we need to try to open the label, so the info can be reported
+ * if a wrong volume has been mounted.
+ */
+ if (dev->is_dvd() && (dcr->VolCatInfo.VolCatParts > 0)) {
+ break;
+ }
#endif
-
+
Jmsg3(jcr, M_FATAL, 0, _("Open device %s Volume \"%s\" failed: ERR=%s\n"),
- dev->print_name(), dcr->VolumeName, strerror_dev(dev));
- goto get_out;
+ dev->print_name(), dcr->VolumeName, strerror_dev(dev));
+ goto get_out;
}
Dmsg1(100, "opened dev %s OK\n", dev->print_name());
vol_label_status = read_dev_volume_label(dcr);
switch (vol_label_status) {
case VOL_OK:
- vol_ok = true;
- memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
- break; /* got it */
+ vol_ok = true;
+ memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
+ break; /* got it */
case VOL_IO_ERROR:
- /*
- * Send error message generated by read_dev_volume_label()
- * only we really had a tape mounted. This supresses superfluous
- * error messages when nothing is mounted.
- */
- if (tape_previously_mounted) {
+ /*
+ * Send error message generated by read_dev_volume_label()
+ * only we really had a tape mounted. This supresses superfluous
+ * error messages when nothing is mounted.
+ */
+ if (tape_previously_mounted) {
Jmsg(jcr, M_WARNING, 0, "%s", jcr->errmsg);
- }
- goto default_path;
+ }
+ goto default_path;
case VOL_NAME_ERROR:
- if (tape_initially_mounted) {
- tape_initially_mounted = false;
- goto default_path;
- }
- /* Fall through */
+ if (tape_initially_mounted) {
+ tape_initially_mounted = false;
+ goto default_path;
+ }
+ /* Fall through */
default:
Jmsg1(jcr, M_WARNING, 0, "%s", jcr->errmsg);
default_path:
- tape_previously_mounted = true;
-
- /* If the device requires mount, close it, so the device can be ejected.
- * FIXME: This should perhaps be done for all devices. */
- if (dev->requires_mount()) {
- force_close_device(dev);
- }
-
- /* Call autochanger only once unless ask_sysop called */
- if (try_autochanger) {
- int stat;
+ tape_previously_mounted = true;
+
+ /* If the device requires mount, close it, so the device can be ejected.
+ * FIXME: This should perhaps be done for all devices. */
+ if (dev->requires_mount()) {
+ force_close_device(dev);
+ }
+
+ /* Call autochanger only once unless ask_sysop called */
+ if (try_autochanger) {
+ int stat;
Dmsg2(200, "calling autoload Vol=%s Slot=%d\n",
- dcr->VolumeName, dcr->VolCatInfo.Slot);
- stat = autoload_device(dcr, 0, NULL);
- if (stat > 0) {
- try_autochanger = false;
- continue; /* try reading volume mounted */
- }
- }
-
- /* Mount a specific volume and no other */
+ dcr->VolumeName, dcr->VolCatInfo.Slot);
+ stat = autoload_device(dcr, 0, NULL);
+ if (stat > 0) {
+ try_autochanger = false;
+ continue; /* try reading volume mounted */
+ }
+ }
+
+ /* Mount a specific volume and no other */
Dmsg0(200, "calling dir_ask_sysop\n");
- if (!dir_ask_sysop_to_mount_volume(dcr)) {
- goto get_out; /* error return */
- }
- try_autochanger = true; /* permit using autochanger again */
- continue; /* try reading again */
+ if (!dir_ask_sysop_to_mount_volume(dcr)) {
+ goto get_out; /* error return */
+ }
+ try_autochanger = true; /* permit using autochanger again */
+ continue; /* try reading again */
} /* end switch */
break;
} /* end for loop */
if (!vol_ok) {
Jmsg1(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s.\n"),
- dev->print_name());
+ dev->print_name());
goto get_out;
}
* If this is the first one, we read the label.
*
* Returns: NULL if failed for any reason
- * dcr if successful.
+ * dcr if successful.
* Note, normally reserve_device_for_append() is called
* before this routine.
*/
*/
bstrncpy(dcr->VolumeName, dev->VolHdr.VolumeName, sizeof(dcr->VolumeName));
if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_WRITE) &&
- !(dir_find_next_appendable_volume(dcr) &&
- strcmp(dev->VolHdr.VolumeName, dcr->VolumeName) == 0)) { /* wrong tape mounted */
+ !(dir_find_next_appendable_volume(dcr) &&
+ strcmp(dev->VolHdr.VolumeName, dcr->VolumeName) == 0)) { /* wrong tape mounted */
Dmsg2(190, "Wrong tape mounted: %s. wants:%s\n", dev->VolHdr.VolumeName,
- dcr->VolumeName);
- /* Release volume reserved by dir_find_next_appendable_volume() */
- if (dcr->VolumeName[0]) {
- free_unused_volume(dcr);
- }
- if (dev->num_writers != 0 || dev->reserved_device) {
+ dcr->VolumeName);
+ /* Release volume reserved by dir_find_next_appendable_volume() */
+ if (dcr->VolumeName[0]) {
+ free_unused_volume(dcr);
+ }
+ if (dev->num_writers != 0) {
Jmsg3(jcr, M_FATAL, 0, _("Wanted Volume \"%s\", but device %s is busy writing on \"%s\" .\n"),
- dcr->VolumeName, dev->print_name(), dev->VolHdr.VolumeName);
+ dcr->VolumeName, dev->print_name(), dev->VolHdr.VolumeName);
Dmsg3(200, "Wanted Volume \"%s\", but device %s is busy writing on \"%s\" .\n",
- dcr->VolumeName, dev->print_name(), dev->VolHdr.VolumeName);
- goto get_out;
- }
- /* Wrong tape mounted, release it, then fall through to get correct one */
+ dcr->VolumeName, dev->print_name(), dev->VolHdr.VolumeName);
+ goto get_out;
+ }
+ /* Wrong tape mounted, release it, then fall through to get correct one */
Dmsg0(190, "Wrong tape mounted, release and try mount.\n");
- release = true;
- do_mount = true;
+ release = true;
+ do_mount = true;
} else {
- /*
- * At this point, the correct tape is already mounted, so
- * we do not need to do mount_next_write_volume(), unless
- * we need to recycle the tape.
- */
+ /*
+ * At this point, the correct tape is already mounted, so
+ * we do not need to do mount_next_write_volume(), unless
+ * we need to recycle the tape.
+ */
recycle = strcmp(dcr->VolCatInfo.VolCatStatus, "Recycle") == 0;
Dmsg1(190, "Correct tape mounted. recycle=%d\n", recycle);
- if (recycle && dev->num_writers != 0) {
+ if (recycle && dev->num_writers != 0) {
Jmsg(jcr, M_FATAL, 0, _("Cannot recycle volume \"%s\""
" on device %s because it is in use by another job.\n"),
- dev->VolHdr.VolumeName, dev->print_name());
- goto get_out;
- }
- if (dev->num_writers == 0) {
- memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
- }
+ dev->VolHdr.VolumeName, dev->print_name());
+ goto get_out;
+ }
+ if (dev->num_writers == 0) {
+ memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
+ }
}
} else {
/* Not already in append mode, so mount the device */
Dmsg0(190, "Do mount_next_write_vol\n");
bool mounted = mount_next_write_volume(dcr, release);
if (!mounted) {
- if (!job_canceled(jcr)) {
+ if (!job_canceled(jcr)) {
/* Reduce "noise" -- don't print if job canceled */
Jmsg(jcr, M_FATAL, 0, _("Could not ready device %s for append.\n"),
- dev->print_name());
+ dev->print_name());
Dmsg1(200, "Could not ready device %s for append.\n",
- dev->print_name());
- }
- goto get_out;
+ dev->print_name());
+ }
+ goto get_out;
}
}
- dev->num_writers++; /* we are now a writer */
+ dev->num_writers++; /* we are now a writer */
if (jcr->NumVolumes == 0) {
jcr->NumVolumes = 1;
}
}
if (dev->can_read()) {
- dev->clear_read(); /* clear read bit */
+ dev->clear_read(); /* clear read bit */
/******FIXME**** send read volume usage statistics to director */
Dmsg1(100, "There are %d writers in release_device\n", dev->num_writers);
if (dev->is_labeled()) {
Dmsg0(100, "dir_create_jobmedia_record. Release\n");
- if (!dev->at_weot() && !dir_create_jobmedia_record(dcr)) {
+ if (!dev->at_weot() && !dir_create_jobmedia_record(dcr)) {
Jmsg(jcr, M_FATAL, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
- dcr->VolCatInfo.VolCatName, jcr->Job);
- }
- /* If no more writers, write an EOF */
- if (!dev->num_writers && dev->can_write()) {
- weof_dev(dev, 1);
- write_ansi_ibm_labels(dcr, ANSI_EOF_LABEL, dev->VolHdr.VolumeName);
- }
- if (!dev->at_weot()) {
- dev->VolCatInfo.VolCatFiles = dev->file; /* set number of files */
- dev->VolCatInfo.VolCatJobs++; /* increment number of jobs */
- /* Note! do volume update before close, which zaps VolCatInfo */
+ dcr->VolCatInfo.VolCatName, jcr->Job);
+ }
+ /* If no more writers, write an EOF */
+ if (!dev->num_writers && dev->can_write()) {
+ weof_dev(dev, 1);
+ write_ansi_ibm_labels(dcr, ANSI_EOF_LABEL, dev->VolHdr.VolumeName);
+ }
+ if (!dev->at_weot()) {
+ dev->VolCatInfo.VolCatFiles = dev->file; /* set number of files */
+ dev->VolCatInfo.VolCatJobs++; /* increment number of jobs */
+ /* Note! do volume update before close, which zaps VolCatInfo */
Dmsg0(100, "dir_update_vol_info. Release0\n");
- dir_update_volume_info(dcr, false); /* send Volume info to Director */
- }
+ dir_update_volume_info(dcr, false); /* send Volume info to Director */
+ }
}
} else {
- /*
+ /*
* If we reach here, it is most likely because the job
* has failed, since the device is not in read mode and
* there are no writers. It was probably reserved.
alert = edit_device_codes(dcr, alert, dcr->device->alert_command, "");
bpipe = open_bpipe(alert, 0, "r");
if (bpipe) {
- while (fgets(line, sizeof(line), bpipe->rfd)) {
+ while (fgets(line, sizeof(line), bpipe->rfd)) {
Jmsg(jcr, M_ALERT, 0, _("Alert: %s"), line);
- }
- status = close_bpipe(bpipe);
+ }
+ status = close_bpipe(bpipe);
} else {
- status = errno;
+ status = errno;
}
if (status != 0) {
- berrno be;
+ berrno be;
Jmsg(jcr, M_ALERT, 0, _("3997 Bad alert command: %s: ERR=%s.\n"),
- alert, be.strerror(status));
+ alert, be.strerror(status));
}
Dmsg1(400, "alert status=%d\n", status);
projects / bacula / bacula / commitdiff