Fix from Kees Jongenburger (Part Duex)

git-svn-id: svn://svn.berlios.de/openocd/trunk@1222 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/src/target/target/samsung_s2c2410.cfg b/src/target/target/samsung_s2c2410.cfg
deleted file mode 100644 (file)
index 3c0768b..0000000
--- a/src/target/target/samsung_s2c2410.cfg
+++ /dev/null
@@ -1,35 +0,0 @@
-# Found on the 'TinCanTools' Hammer board.
-
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME s3c2410
-}
-
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
-  # This config file was defaulting to big endian..
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID] } {        
-   set  _CPUTAPID $CPUTAPID    
-} else {        
-   set  _CPUTAPID 0xffffffff
-}
-
-#use combined on interfaces or targets that cannot set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
-
-# speed up memory downloads
-arm7_9 fast_memory_access enable
-arm7_9 dcc_downloads enable

diff --git a/src/target/target/samsung_s3c2410.cfg b/src/target/target/samsung_s3c2410.cfg
new file mode 100644 (file)
index 0000000..3c0768b
--- /dev/null
+++ b/src/target/target/samsung_s3c2410.cfg
@@ -0,0 +1,35 @@
+# Found on the 'TinCanTools' Hammer board.
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME s3c2410
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+  # This config file was defaulting to big endian..
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {        
+   set  _CPUTAPID $CPUTAPID    
+} else {        
+   set  _CPUTAPID 0xffffffff
+}
+
+#use combined on interfaces or targets that cannot set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
+
+# speed up memory downloads
+arm7_9 fast_memory_access enable
+arm7_9 dcc_downloads enable