/* BEGIN ATMEL COPYRIGHT */
/* ----------------------------------------------------------------------------
- * ATMEL Microcontroller Software Support
+ * ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2009, Atmel Corporation
*
uint32_t CHIPID_EXID;
#define SAM3_SUPC_CR (0x400E1210)
- uint32_t SUPC_CR;
+ uint32_t SUPC_CR;
#define SAM3_PMC_BASE (0x400E0400)
#define SAM3_PMC_SCSR (SAM3_PMC_BASE + 0x0008)
int probed;
// DANGER: THERE ARE DRAGONS HERE..
// NOTE: If you add more 'ghost' pointers
- // be aware that you must *manually* update
+ // be aware that you must *manually* update
// these pointers in the function sam3_GetDetails()
// See the comment "Here there be dragons"
// so we can find the chip we belong to
struct sam3_chip *pChip;
- // so we can find the orginal bank pointer
+ // so we can find the orginal bank pointer
flash_bank_t *pBank;
unsigned bank_number;
uint32_t controller_address;
.name = "at91sam3u4e",
.total_flash_size = 256 * 1024,
.total_sram_size = 52 * 1024,
- .n_gpnvms = 3,
+ .n_gpnvms = 3,
.n_banks = 2,
// System boots at address 0x0
// gpnvm[1] = selects boot code
// if gpnvm[1] == 0
// boot is via "SAMBA" (rom)
- // else
+ // else
// boot is via FLASH
// Selection is via gpnvm[2]
// endif
// else
// Bank1 is the boot rom
// endif
- .bank[0] = {
+ .bank[0] = {
.probed = 0,
.pChip = NULL,
.pBank = NULL,
.bank_number = 0,
- .base_address = FLASH_BANK0_BASE,
+ .base_address = FLASH_BANK0_BASE,
.controller_address = 0x400e0800,
.present = 1,
.size_bytes = 128 * 1024,
.name = "at91sam3u2e",
.total_flash_size = 128 * 1024,
.total_sram_size = 36 * 1024,
- .n_gpnvms = 2,
+ .n_gpnvms = 2,
.n_banks = 1,
// System boots at address 0x0
// gpnvm[1] = selects boot code
// if gpnvm[1] == 0
// boot is via "SAMBA" (rom)
- // else
+ // else
// boot is via FLASH
// Selection is via gpnvm[2]
// endif
- .bank[0] = {
+ .bank[0] = {
.probed = 0,
.pChip = NULL,
.pBank = NULL,
.bank_number = 0,
- .base_address = FLASH_BANK0_BASE,
+ .base_address = FLASH_BANK0_BASE,
.controller_address = 0x400e0800,
.present = 1,
.size_bytes = 128 * 1024,
.name = "at91sam3u1e",
.total_flash_size = 64 * 1024,
.total_sram_size = 20 * 1024,
- .n_gpnvms = 2,
+ .n_gpnvms = 2,
.n_banks = 1,
// System boots at address 0x0
// gpnvm[1] = selects boot code
// if gpnvm[1] == 0
// boot is via "SAMBA" (rom)
- // else
+ // else
// boot is via FLASH
// Selection is via gpnvm[2]
// endif
//
-
- .bank[0] = {
+
+ .bank[0] = {
.probed = 0,
.pChip = NULL,
.pBank = NULL,
.bank_number = 0,
- .base_address = FLASH_BANK0_BASE,
+ .base_address = FLASH_BANK0_BASE,
.controller_address = 0x400e0800,
.present = 1,
.size_bytes = 64 * 1024,
.bank_number = 1,
},
},
-
+
{
.chipid_cidr = 0x28000960,
.name = "at91sam3u4c",
.total_flash_size = 256 * 1024,
.total_sram_size = 52 * 1024,
- .n_gpnvms = 3,
+ .n_gpnvms = 3,
.n_banks = 2,
// System boots at address 0x0
// gpnvm[1] = selects boot code
// if gpnvm[1] == 0
// boot is via "SAMBA" (rom)
- // else
+ // else
// boot is via FLASH
// Selection is via gpnvm[2]
// endif
// else
// Bank1 is the boot rom
// endif
- .bank[0] = {
+ .bank[0] = {
.probed = 0,
.pChip = NULL,
.pBank = NULL,
.bank_number = 0,
- .base_address = FLASH_BANK0_BASE,
+ .base_address = FLASH_BANK0_BASE,
.controller_address = 0x400e0800,
.present = 1,
.size_bytes = 128 * 1024,
.name = "at91sam3u2c",
.total_flash_size = 128 * 1024,
.total_sram_size = 36 * 1024,
- .n_gpnvms = 2,
+ .n_gpnvms = 2,
.n_banks = 1,
// System boots at address 0x0
// gpnvm[1] = selects boot code
// if gpnvm[1] == 0
// boot is via "SAMBA" (rom)
- // else
+ // else
// boot is via FLASH
// Selection is via gpnvm[2]
// endif
- .bank[0] = {
+ .bank[0] = {
.probed = 0,
.pChip = NULL,
.pBank = NULL,
.bank_number = 0,
- .base_address = FLASH_BANK0_BASE,
+ .base_address = FLASH_BANK0_BASE,
.controller_address = 0x400e0800,
.present = 1,
.size_bytes = 128 * 1024,
.name = "at91sam3u1c",
.total_flash_size = 64 * 1024,
.total_sram_size = 20 * 1024,
- .n_gpnvms = 2,
+ .n_gpnvms = 2,
.n_banks = 1,
// System boots at address 0x0
// gpnvm[1] = selects boot code
// if gpnvm[1] == 0
// boot is via "SAMBA" (rom)
- // else
+ // else
// boot is via FLASH
// Selection is via gpnvm[2]
// endif
//
-
- .bank[0] = {
+
+ .bank[0] = {
.probed = 0,
.pChip = NULL,
.pBank = NULL,
.bank_number = 0,
- .base_address = FLASH_BANK0_BASE,
+ .base_address = FLASH_BANK0_BASE,
.controller_address = 0x400e0800,
.present = 1,
.size_bytes = 64 * 1024,
},
// terminate
- {
+ {
.chipid_cidr = 0,
.name = NULL,
}
* @param pPrivate - info about the bank
* @param v - result goes here
*/
-static int
+static int
EFC_GetStatus(struct sam3_bank_private *pPrivate, uint32_t *v)
{
int r;
r = target_read_u32(pPrivate->pChip->target, pPrivate->controller_address + offset_EFC_FSR, v);
- LOG_DEBUG("Status: 0x%08x (lockerror: %d, cmderror: %d, ready: %d)",
+ LOG_DEBUG("Status: 0x%08x (lockerror: %d, cmderror: %d, ready: %d)",
(unsigned int)(*v),
((unsigned int)((*v >> 2) & 1)),
((unsigned int)((*v >> 1) & 1)),
((unsigned int)((*v >> 0) & 1)));
-
+
return r;
}
* @param pPrivate - info about the bank
* @param v - result goes here
*/
-static int
+static int
EFC_GetResult(struct sam3_bank_private *pPrivate, uint32_t *v)
{
int r;
case AT91C_EFC_FCMD_WP:
case AT91C_EFC_FCMD_WPL:
- case AT91C_EFC_FCMD_EWP:
+ case AT91C_EFC_FCMD_EWP:
case AT91C_EFC_FCMD_EWPL:
// case AT91C_EFC_FCMD_EPL:
// case AT91C_EFC_FCMD_EPA:
LOG_ERROR("*BUG*: Embedded flash has only %u pages", (unsigned)(n));
}
break;
-
+
case AT91C_EFC_FCMD_SFB:
case AT91C_EFC_FCMD_CFB:
if (argument >= pPrivate->pChip->details.n_gpnvms) {
- LOG_ERROR("*BUG*: Embedded flash has only %d GPNVMs",
+ LOG_ERROR("*BUG*: Embedded flash has only %d GPNVMs",
pPrivate->pChip->details.n_gpnvms);
}
break;
-
+
case AT91C_EFC_FCMD_GETD:
case AT91C_EFC_FCMD_EA:
case AT91C_EFC_FCMD_GLB:
return ERROR_FAIL;
} else {
retry++;
- LOG_ERROR("Flash controller(%d) is not ready, attempting reset",
+ LOG_ERROR("Flash controller(%d) is not ready, attempting reset",
pPrivate->bank_number);
// we do that by issuing the *STOP* command
EFC_StartCommand(pPrivate, AT91C_EFC_FCMD_SPUI, 0);
- // above is recursive, and further recursion is blocked by
+ // above is recursive, and further recursion is blocked by
// if (command == AT91C_EFC_FCMD_SPUI) above
goto do_retry;
}
v = (0x5A << 24) | (argument << 8) | command;
LOG_DEBUG("Command: 0x%08x", ((unsigned int)(v)));
- r = target_write_u32(pPrivate->pBank->target,
+ r = target_write_u32(pPrivate->pBank->target,
pPrivate->controller_address + offset_EFC_FCR,
v);
if (r != ERROR_OK) {
* @param argument - Optional command argument.
* @param status - put command status bits here
*/
-static int
-EFC_PerformCommand(struct sam3_bank_private *pPrivate,
- unsigned command,
- unsigned argument,
+static int
+EFC_PerformCommand(struct sam3_bank_private *pPrivate,
+ unsigned command,
+ unsigned argument,
uint32_t *status)
{
uint32_t v;
long long ms_now, ms_end;
- // default
+ // default
if (status) {
*status = 0;
}
/** Read the unique ID.
- *
+ *
* \param pPrivate - info about the bank
*
* The unique ID is stored in the 'pPrivate' structure.
}
for (x = 0 ; x < 4 ; x++) {
- r = target_read_u32(pPrivate->pChip->target,
+ r = target_read_u32(pPrivate->pChip->target,
pPrivate->pBank->base + (x * 4),
&v);
if (r < 0) {
r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_SPUI, 0, NULL);
LOG_DEBUG("End: R=%d, id = 0x%08x, 0x%08x, 0x%08x, 0x%08x",
- r,
+ r,
(unsigned int)(pPrivate->pChip->cfg.unique_id[0]),
(unsigned int)(pPrivate->pChip->cfg.unique_id[1]),
(unsigned int)(pPrivate->pChip->cfg.unique_id[2]),
(unsigned int)(pPrivate->pChip->cfg.unique_id[3]));
return r;
-
+
}
/** Erases the entire flash.
*
*/
//------------------------------------------------------------------------------
-static int
+static int
FLASHD_GetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm, unsigned *puthere)
{
uint32_t v;
if (puthere) {
// Check if GPNVM is set
- // get the bit and make it a 0/1
+ // get the bit and make it a 0/1
*puthere = (v >> gpnvm) & 1;
}
*
* Returns 0 if successful; otherwise returns an error code.
*/
-static int
+static int
FLASHD_ClrGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm)
{
int r;
* @param gpnvm GPNVM index.
*
*/
-static int
+static int
FLASHD_SetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm)
{
int r;
* \param end End address of range.
*/
-static int
+static int
FLASHD_GetLockBits(struct sam3_bank_private *pPrivate, uint32_t *v)
{
int r;
}
-/**Unlocks all the regions in the given address range.
+/**Unlocks all the regions in the given address range.
*
* \param start_sector - first sector to unlock
* \param end_sector - last (inclusive) to unlock
*/
-static int
+static int
FLASHD_Lock(struct sam3_bank_private *pPrivate,
unsigned start_sector,
unsigned end_sector)
int r;
pages_per_sector = pPrivate->sector_size / pPrivate->page_size;
-
+
/* Lock all pages */
while (start_sector <= end_sector) {
pg = start_sector * pages_per_sector;
}
// print the fieldname, the field value, in dec & hex, and return field value
-static uint32_t
-sam3_reg_fieldname(struct sam3_chip *pChip,
+static uint32_t
+sam3_reg_fieldname(struct sam3_chip *pChip,
const char *regname,
uint32_t value,
unsigned shift,
hwidth = 8;
dwidth = 12;
}
-
+
// show the basics
- sam3_sprintf(pChip, "\t%*s: %*d [0x%0*x] ",
+ sam3_sprintf(pChip, "\t%*s: %*d [0x%0*x] ",
REG_NAME_WIDTH, regname,
dwidth, v,
hwidth, v);
static const char * const eproc_names[] = {
_unknown, // 0
"arm946es", // 1
- "arm7tdmi", // 2
+ "arm7tdmi", // 2
"cortex-m3", // 3
"arm920t", // 4
"arm926ejs", // 5
"48K Bytes", // 0
"1K Bytes", // 1
"2K Bytes", // 2
- "6K Bytes", // 3
+ "6K Bytes", // 3
"112K Bytes", // 4
"4K Bytes", // 5
"80K Bytes", // 6
"160K Bytes", // 7
- "8K Bytes", // 8
- "16K Bytes", // 9
+ "8K Bytes", // 8
+ "16K Bytes", // 9
"32K Bytes", // 10
"64K Bytes", // 11
"128K Bytes", // 12
"sram emulating flash", // 4
_unknown, // 5
_unknown, // 6
- _unknown, // 7
-
+ _unknown, // 7
+
};
static const char *_yes_or_no(uint32_t v)
"4 MHz", "8 MHz", "12 MHz", "reserved"
};
-static void
+static void
sam3_explain_ckgr_mor(struct sam3_chip *pChip)
{
uint32_t v;
v = sam3_reg_fieldname(pChip, "MOSCXTEN", pChip->cfg.CKGR_MOR, 0, 1);
sam3_sprintf(pChip, "(main xtal enabled: %s)\n",
_yes_or_no(v));
- v = sam3_reg_fieldname(pChip, "MOSCXTBY", pChip->cfg.CKGR_MOR, 1, 1);
+ v = sam3_reg_fieldname(pChip, "MOSCXTBY", pChip->cfg.CKGR_MOR, 1, 1);
sam3_sprintf(pChip, "(main osc bypass: %s)\n",
_yes_or_no(v));
rcen = sam3_reg_fieldname(pChip, "MOSCRCEN", pChip->cfg.CKGR_MOR, 2, 1);
v = sam3_reg_fieldname(pChip, "MOSCSEL", pChip->cfg.CKGR_MOR, 24, 1);
sam3_sprintf(pChip, "(mainosc source: %s)\n",
v ? "external xtal" : "internal RC");
-
+
v = sam3_reg_fieldname(pChip,"CFDEN", pChip->cfg.CKGR_MOR, 25, 1);
sam3_sprintf(pChip, "(clock failure enabled: %s)\n",
_yes_or_no(v));
}
-
-static void
+
+static void
sam3_explain_chipid_cidr(struct sam3_chip *pChip)
{
int x;
v = sam3_reg_fieldname(pChip, "EPROC", pChip->cfg.CHIPID_CIDR, 5, 3);
sam3_sprintf(pChip, "%s\n", eproc_names[v]);
-
+
v = sam3_reg_fieldname(pChip, "NVPSIZE", pChip->cfg.CHIPID_CIDR, 8, 4);
sam3_sprintf(pChip, "%s\n", nvpsize[v]);
break;
}
}
-
+
sam3_sprintf(pChip, "%s\n", cp);
v = sam3_reg_fieldname(pChip, "NVPTYP", pChip->cfg.CHIPID_CIDR, 28, 3);
sam3_sprintf(pChip, "(exists: %s)\n", _yes_or_no(v));
}
-static void
+static void
sam3_explain_ckgr_mcfr(struct sam3_chip *pChip)
{
uint32_t v;
-
+
v = sam3_reg_fieldname(pChip, "MAINFRDY", pChip->cfg.CKGR_MCFR, 16, 1);
sam3_sprintf(pChip, "(main ready: %s)\n", _yes_or_no(v));
v = sam3_reg_fieldname(pChip, "MAINF", pChip->cfg.CKGR_MCFR, 0, 16);
-
+
v = (v * pChip->cfg.slow_freq) / 16;
pChip->cfg.mainosc_freq = v;
_tomhz(pChip->cfg.plla_freq));
}
}
-
-
+
+
static void
sam3_explain_mckr(struct sam3_chip *pChip)
{
}
sam3_sprintf(pChip, "%s (%3.03f Mhz)\n",
- cp,
+ cp,
_tomhz(fin));
pres = sam3_reg_fieldname(pChip, "PRES", pChip->cfg.PMC_MCKR, 4, 3);
switch (pres & 0x07) {
}
sam3_sprintf(pChip, "(%s)\n", cp);
fin = fin / pdiv;
- // sam3 has a *SINGLE* clock -
+ // sam3 has a *SINGLE* clock -
// other at91 series parts have divisors for these.
pChip->cfg.cpu_freq = fin;
pChip->cfg.mclk_freq = fin;
sam3_sprintf(pChip, "\t\tResult CPU Freq: %3.03f\n",
_tomhz(fin));
}
-
+
#if 0
static struct sam3_chip *
target2sam3(target_t *pTarget)
static uint32_t *
sam3_get_reg_ptr(struct sam3_cfg *pCfg, const struct sam3_reg_list *pList)
{
- // this function exists to help
+ // this function exists to help
// keep funky offsetof() errors
// and casting from causing bugs
return ((uint32_t *)(((char *)(pCfg)) + pList->struct_offset));
}
-
-
+
+
#define SAM3_ENTRY(NAME, FUNC) { .address = SAM3_ ## NAME, .struct_offset = offsetof(struct sam3_cfg, NAME), #NAME, FUNC }
static const struct sam3_reg_list sam3_all_regs[] = {
SAM3_ENTRY(CKGR_MOR , sam3_explain_ckgr_mor),
// calculate where this one go..
// it is "possibly" this register.
-
+
pPossible = ((uint32_t *)(((char *)(&(pChip->cfg))) + pReg->struct_offset));
// well? Is it this register
}
return r;
}
-
-
+
+
static int
sam3_ReadAllRegs(struct sam3_chip *pChip)
pReg = &(sam3_all_regs[0]);
while (pReg->name) {
- r = sam3_ReadThisReg(pChip,
+ r = sam3_ReadThisReg(pChip,
sam3_get_reg_ptr(&(pChip->cfg), pReg));
if (r != ERROR_OK) {
LOG_ERROR("Cannot read SAM3 registere: %s @ 0x%08x, Error: %d\n",
pReg->name, ((unsigned)(pReg->address)), r);
return r;
}
-
+
pReg++;
}
// display all regs
LOG_DEBUG("Start: %s", pReg->name);
regval = *sam3_get_reg_ptr(&(pChip->cfg), pReg);
- sam3_sprintf(pChip, "%*s: [0x%08x] -> 0x%08x\n",
+ sam3_sprintf(pChip, "%*s: [0x%08x] -> 0x%08x\n",
REG_NAME_WIDTH,
pReg->name,
pReg->address,
sam3_sprintf(pChip," mainosc: %3.03f MHz\n", _tomhz(pChip->cfg.mainosc_freq));
sam3_sprintf(pChip," plla: %3.03f MHz\n", _tomhz(pChip->cfg.plla_freq));
sam3_sprintf(pChip," cpu-freq: %3.03f MHz\n", _tomhz(pChip->cfg.cpu_freq));
- sam3_sprintf(pChip,"mclk-freq: %3.03f MHz\n", _tomhz(pChip->cfg.mclk_freq));
+ sam3_sprintf(pChip,"mclk-freq: %3.03f MHz\n", _tomhz(pChip->cfg.mclk_freq));
sam3_sprintf(pChip, " UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x\n",
pChip->cfg.unique_id[2],
pChip->cfg.unique_id[3]);
-
+
return ERROR_OK;
}
-
-static int
+
+static int
sam3_erase_check(struct flash_bank_s *bank)
{
int x;
return ERROR_OK;
}
-static int
+static int
sam3_protect_check(struct flash_bank_s *bank)
{
int r;
if (!(pPrivate->probed)) {
return ERROR_FLASH_BANK_NOT_PROBED;
}
-
+
r = FLASHD_GetLockBits(pPrivate , &v);
if (r != ERROR_OK) {
LOG_DEBUG("Failed: %d",r);
return ERROR_OK;
}
-static int
-sam3_flash_bank_command(struct command_context_s *cmd_ctx,
- char *cmd,
- char **args,
- int argc,
+static int
+sam3_flash_bank_command(struct command_context_s *cmd_ctx,
+ char *cmd,
+ char **args,
+ int argc,
struct flash_bank_s *bank)
{
struct sam3_chip *pChip;
pChip = all_sam3_chips;
-
+
// is this an existing chip?
while (pChip) {
if (pChip->target == bank->target) {
return ERROR_FAIL;
}
}
-
+
switch (bank->base) {
default:
LOG_ERROR("Address 0x%08x invalid bank address (try 0x%08x or 0x%08x)",
}
}
if (pDetails->name == NULL) {
- LOG_ERROR("SAM3 ChipID 0x%08x not found in table (perhaps you can this chip?)",
+ LOG_ERROR("SAM3 ChipID 0x%08x not found in table (perhaps you can this chip?)",
(unsigned int)(pPrivate->pChip->cfg.CHIPID_CIDR));
// Help the victim, print details about the chip
membuf_reset(pPrivate->pChip->mbuf);
- membuf_sprintf(pPrivate->pChip->mbuf,
+ membuf_sprintf(pPrivate->pChip->mbuf,
"SAM3 CHIPID_CIDR: 0x%08x decodes as follows\n",
pPrivate->pChip->cfg.CHIPID_CIDR);
sam3_explain_chipid_cidr(pPrivate->pChip);
}
// Overwrite the "details" structure.
- memcpy(&(pPrivate->pChip->details),
- pDetails,
+ memcpy(&(pPrivate->pChip->details),
+ pDetails,
sizeof(pPrivate->pChip->details));
// now fix the ghosted pointers
pChip->details.bank[x].pBank = saved_banks[x];
}
- // update the *BANK*SIZE*
+ // update the *BANK*SIZE*
LOG_DEBUG("End");
return ERROR_OK;
-}
-
+}
-static int
+
+static int
_sam3_probe(struct flash_bank_s *bank, int noise)
{
unsigned x;
return r;
}
-
+
LOG_DEBUG("Here");
r = sam3_GetInfo(pPrivate->pChip);
if (r != ERROR_OK) {
r = sam3_GetDetails(pPrivate);
if (r != ERROR_OK) {
return r;
- }
+ }
}
// update the flash bank size
return ERROR_FAIL;
}
bank->num_sectors = pPrivate->nsectors;
-
+
for (x = 0 ; ((int)(x)) < bank->num_sectors ; x++) {
bank->sectors[x].size = pPrivate->sector_size;
bank->sectors[x].offset = x * (pPrivate->sector_size);
LOG_DEBUG("Bank = %d, nbanks = %d",
pPrivate->bank_number , pPrivate->pChip->details.n_banks);
if ((pPrivate->bank_number + 1) == pPrivate->pChip->details.n_banks) {
- // read unique id,
+ // read unique id,
// it appears to be associated with the *last* flash bank.
FLASHD_ReadUniqueID(pPrivate);
}
return r;
}
-static int
+static int
sam3_probe(struct flash_bank_s *bank)
{
return _sam3_probe(bank, 1);
}
-static int
+static int
sam3_auto_probe(struct flash_bank_s *bank)
{
return _sam3_probe(bank, 0);
-static int
+static int
sam3_erase(struct flash_bank_s *bank, int first, int last)
{
struct sam3_bank_private *pPrivate;
return ERROR_OK;
}
-static int
+static int
sam3_protect(struct flash_bank_s *bank, int set, int first, int last)
{
struct sam3_bank_private *pPrivate;
LOG_DEBUG("End: r=%d",r);
return r;
-
+
}
adr = pagenum * pPrivate->page_size;
adr += adr + pPrivate->base_address;
- r = target_read_memory(pPrivate->pChip->target,
+ r = target_read_memory(pPrivate->pChip->target,
adr,
4, /* THIS*MUST*BE* in 32bit values */
pPrivate->page_size / 4,
// the DAP cannot... so - we download this 28byte thing
// Run the algorithm - (below)
// to program the device
-//
+//
// ========================================
// #include <stdint.h>
-//
-// struct foo {
+//
+// struct foo {
// uint32_t *dst;
// const uint32_t *src;
// int n;
// uint32_t cmd;
// };
//
-//
+//
// uint32_t sam3_function(struct foo *p)
// {
// volatile uint32_t *v;
// const uint32_t *s;
// int n;
// uint32_t r;
-//
+//
// d = p->dst;
// s = p->src;
// n = p->n;
-//
+//
// do {
// *d++ = *s++;
// } while (--n)
// ;
-//
+//
// v = p->base;
-//
+//
// v[ 1 ] = p->cmd;
// do {
// r = v[8/4];
-static const uint8_t
+static const uint8_t
sam3_page_write_opcodes[] = {
// 24 0000 0446 mov r4, r0
0x04,0x46,
adr += (adr + pPrivate->base_address);
LOG_DEBUG("Wr Page %u @ phys address: 0x%08x", pagenum, (unsigned int)(adr));
- r = target_write_memory(pPrivate->pChip->target,
+ r = target_write_memory(pPrivate->pChip->target,
adr,
4, /* THIS*MUST*BE* in 32bit values */
pPrivate->page_size / 4,
}
return ERROR_OK;
}
-
-
-
-
-
-static int
-sam3_write(struct flash_bank_s *bank,
- uint8_t *buffer,
- uint32_t offset,
+
+
+
+
+
+static int
+sam3_write(struct flash_bank_s *bank,
+ uint8_t *buffer,
+ uint32_t offset,
uint32_t count)
{
int n;
if ((offset + count) > pPrivate->size_bytes) {
LOG_ERROR("Flash write error - past end of bank");
LOG_ERROR(" offset: 0x%08x, count 0x%08x, BankEnd: 0x%08x",
- (unsigned int)(offset),
+ (unsigned int)(offset),
(unsigned int)(count),
(unsigned int)(pPrivate->size_bytes));
return ERROR_FAIL;
}
pagebuffer = alloca(pPrivate->page_size);
-
+
// what page do we start & end in?
page_cur = offset / pPrivate->page_size;
page_end = (offset + count - 1) / pPrivate->page_size;
-
+
LOG_DEBUG("Offset: 0x%08x, Count: 0x%08x", (unsigned int)(offset), (unsigned int)(count));
LOG_DEBUG("Page start: %d, Page End: %d", (int)(page_cur), (int)(page_end));
-
+
// Special case: all one page
//
// Otherwise:
// (1) non-aligned start
// (2) body pages
// (3) non-aligned end.
-
+
// Handle special case - all one page.
if (page_cur == page_end) {
LOG_DEBUG("Special case, all in one page");
if (r != ERROR_OK) {
return r;
}
-
+
page_offset = (offset & (pPrivate->page_size-1));
memcpy(pagebuffer + page_offset,
buffer,
count);
-
+
r = sam3_page_write(pPrivate, page_cur, pagebuffer);
if (r != ERROR_OK) {
return r;
memcpy(pagebuffer + page_offset,
buffer,
n);
-
+
r = sam3_page_write(pPrivate, page_cur, pagebuffer);
if (r != ERROR_OK) {
return r;
}
// intermediate large pages
- // also - the final *terminal*
+ // also - the final *terminal*
// if that terminal page is a full page
- LOG_DEBUG("Full Page Loop: cur=%d, end=%d, count = 0x%08x",
+ LOG_DEBUG("Full Page Loop: cur=%d, end=%d, count = 0x%08x",
(int)page_cur, (int)page_end, (unsigned int)(count));
- while ((page_cur < page_end) &&
+ while ((page_cur < page_end) &&
(count >= pPrivate->page_size)) {
r = sam3_page_write(pPrivate, page_cur, buffer);
if (r != ERROR_OK) {
}
r = 0;
-
+
// bank0 must exist before we can do anything
if (pChip->details.bank[0].pBank == NULL) {
x = 0;
need_define:
- command_print(cmd_ctx,
- "Please define bank %d via command: flash bank %s ... ",
+ command_print(cmd_ctx,
+ "Please define bank %d via command: flash bank %s ... ",
x,
at91sam3_flash.name);
return ERROR_FAIL;
}
// above garentees the "chip details" structure is valid
// and thus, bank private areas are valid
- // and we have a SAM3 chip, what a concept!
-
+ // and we have a SAM3 chip, what a concept!
+
// auto-probe other banks, 0 done above
for (x = 1 ; x < SAM3_MAX_FLASH_BANKS ; x++) {
if (!(pChip->details.bank[x].present)) {
continue;
}
-
+
if (pChip->details.bank[x].pBank == NULL) {
goto need_define;
}
if (pChip->details.bank[x].probed) {
continue;
}
-
+
r = sam3_auto_probe(pChip->details.bank[x].pBank);
if (r != ERROR_OK) {
return r;
}
}
-
+
r = sam3_GetInfo(pChip);
if (r != ERROR_OK) {
LOG_DEBUG("Sam3Info, Failed %d\n",r);
return r;
}
-
+
// print results
cp = membuf_strtok(pChip->mbuf, "\n", &vp);
command_print(cmd_ctx, "Missing GPNVM number");
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
if (0 == strcmp("set", argv[0])) {
r = FLASHD_SetGPNVM(&(pChip->details.bank[0]), who);
} else if ((0 == strcmp("clr", argv[0])) ||
return r;
}
-static int
+static int
sam3_handle_slowclk_command(struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc)
{
uint32_t v;
}
pChip->cfg.slow_freq = v;
break;
-
+
default:
// error
command_print(cmd_ctx,"Too many parameters");
return ERROR_COMMAND_SYNTAX_ERROR;
break;
}
- command_print(cmd_ctx, "Slowclk freq: %d.%03dkhz",
+ command_print(cmd_ctx, "Slowclk freq: %d.%03dkhz",
(int)(pChip->cfg.slow_freq/ 1000),
(int)(pChip->cfg.slow_freq% 1000));
return ERROR_OK;
pCmd = register_command(cmd_ctx, NULL, "at91sam3", NULL, COMMAND_ANY, NULL);
register_command(cmd_ctx, pCmd,
- "gpnvm",
- sam3_handle_gpnvm_command,
- COMMAND_EXEC,
+ "gpnvm",
+ sam3_handle_gpnvm_command,
+ COMMAND_EXEC,
"at91sam3 gpnvm [action [<BIT>], by default 'show', otherwise set | clear BIT");
register_command(cmd_ctx, pCmd,
"info",
{
.name = "at91sam3",
.register_commands = sam3_register_commands,
-
+
.flash_bank_command = sam3_flash_bank_command,
.erase = sam3_erase,
.protect = sam3_protect,
projects / openocd / commitdiff