+Changes to 1.37.42:
+26Oct05
+- Don't overwrite pthreadVCE.dll or msvcr71.dll during Win32
+ install.
+- Update README.win32 instructions.
+25Oct05
+- Make db_get_job_record() return Name so that the ACL
+ can be checked. Fixes bug #446
+22Oct05
+- Insure that all the SD tools init the Autochanger
+ resources.
+
+Changes to 1.37.41:
+22Oct05
+- Print error message if no Changer Command found.
+- Apply fix from Martin Simmons to clear structure before
+ using it in IPADDR -- fixes a bind() bug on AIX.
+14Oct05
+- Add NetBSD fstype patch from Geert Hendrickx <ghen@telenet.be>
+- Update num_parts only when writing to DVD.
+13Oct05
+- Fix error conditions in bpipe.c DVD routine (terminate buffer).
+- Use a bigger buffer 32K as suggested by Arno in bpipe.c.
+- Increase dvd mount timeout with patch from Arno.
+- Modify DVD code so that it keeps a state flag that indicates
+ when the freespace variable is valid. freespace_errno, now has
+ either 0 or an errno. There are no negative errnos.
+- Create is_freespace_ok() to test state flag. Also, set_freespace_ok()
+ and clear_freespace_ok(). Modify code to use them. This
+ simplifies a bit the logic of the freespace code.
+- Edit 64bit debug values correctly in dvd.c
+- Fix %e variable to check num_parts rather than part.
+- Use static buffer instead of static buffers for FI_to_ascii()
+ and stream_to_ascii() debug routines in SD. This is to prevent
+ possible race conditions between two threads (possibly Phil's
+ unmount problem).
+12Oct05
+- Add a .dir command that separates arguments with commas. It
+ is intended to be used in the tree routines to get a
+ machine readable output for GUIs like wx-console.
+- Make configure set dvd-handler to have execute permission.
+- Install dvd-handler as is done for other dvd-xxx scripts.
+- In block.c call dvd_write_part() to write last part rather
+ than dvd_open_next_part().
+- Prefix some DVD subroutines with dvd_
+11Oct05
+- Add extra debug to Update media error for VolFiles decrease
+ error.
+- Do not update dev->file on set_ateof() for non-tape.
+10Oct05
+- Mark DVD volume in error if part cannot be written.
+- If a DVD is mounted, unmount it before asking operator
+ to mount an different one.
+- Add Arno's dvd-handler script to the scripts directory and
+ integrate with configure. It replaces both existing scripts.
+- Make default schedule start at 23:10
+- Implement gui release in Makefile. It creates two .tar.gz
+ bacula-web and bimagemgr.
+08Oct05
+- Add README plus tar release to gui project.
+- Manual documentation
+- Tweak bacula.man doc
+- Add PRAGMA synchronous = NORMAL; to SQLite3 tables. This
+ speeds up SQLite3 so it is only about 10% slower than version
+ 2.xx. Thanks to Russell Howe for this tip.
+- Add msvcr71.dll to pebuilder .inf file as it is needed by
+ Bacula FD. Thanks to Brandon for passing this fix to Scott.
+05Oct05
+- Add VolumePurged method to Python JobEvents class. Fixes
+ bug #428 (I think).
+- Add JobId index to File table for MySQL.
+- Correct tray-monitor crash of bacula-dir. qstatus_cmd()
+ code referenced the wrong pointer. Fixes bug #438.
+- Add bacualnovss.mak file from Martin.
+- Remove Pool from restore string in wbrestorepanel.cpp. Patch
+ from user for bug #433.
+- Correct code in wbrestorpanel.cpp with misplaced parens. Patch
+ from user for bug #431
+- Correct printing filenames/date/times in wbrestorepanel.cpp due to bad
+ column alignment. Patch from user for bug #432.
Changes to 1.37.40:
01Oct05
- Make built-in variables table driven.
- First cut of Python Events for Bacula. Director only.
StartJob, EndJob, NewVolume events.
+
+
+ Technical notes on version 1.37
+ Nicolas Boichat
+
+General:
+
+Changes to 1.37.*:
+26Oct05
+ - dvd.c: update VolParts when writing the last part.
+19Oct05
+ - configure: add check for dd, remove check for df
+ - block.c:do_dvd_size_checks: Check we are writing to a dvd before doing tests
+ (reported by David Raine on the list, "[Bacula-users] LTO drive - End Of Volume error").
+ - Update bacula-sd.conf.in to use dvd-handler correctly.
+ - dvd.c:dvd_write_part: Increase timeout when writing the first part (see the code for
+ more details).
+18Oct05
+ - Modify .backups command to get a fileset parameter (fix bug #444).
+17Oct05
+ - Fix bug when recycling DVD devices (append flag was removed).
+ - Add tests for dvd+rw-format in configure script.
+ - scripts/dvd-handler: Reformat DVD-RW when needed. This needs dvd+rw-format.
+ - Add patch for dvd+rw-tools in patches dir (this should probably be elsewhere).
+16Oct05
+ - Remove scripts/dvd-freespace and scripts/dvd-writepart, as they are now
+ merged into scripts/dvd-handler. Note: Documentation needs to be updated.
+ - scripts/dvd-handler: "zero" brand-new DVD+/-RW to fix a problem with some
+ DVD-writers, thanks to Arno Lehmann for reporting this, and providing the
+ way to fix it.
+ - new scripts/dvd-handler. Note: it also needs a patched version of dvd+rw-tools.
+ - new scripts/dvd-freespace. Note: it needs a patched version of dvd+rw-tools.
+ - dvd.c:dvd_write_part: Don't write empty part. (Fix 4GB crossing bug reported by Arno Lehmann)
+14Oct05
+ - dvd.c:dvd_write_part: Use part_size and not max_part_size when setting write timeout.
+ - dvd.c:do_mount_dev: When checking if the DVD is mounted, do not count ., .. and .keep (needed on Gentoo).
+15Aug05
+ - Convert dvd-writepart to Python.
+ - Increase delay from 3 seconds to 5 seconds between SIGTERM and SIGKILL when
+ killing external programs.
+13Aug05
+ - Add gettext macros in autoconf/gettext-macros.
+ - Modify how localedir is set in configure.in.
+ - Remove setlocale check (useless).
+10Aug05
+ - Mark translatable strings in all source files.
+08Aug05
+ - Create French and Italian translation files (fr.po, it.po).
+ - Add support for translation in configure and Makefiles.
+ - Update autoconf/aclocal.m4 so it is automatically created with aclocal
+ (Note: autoconf/gnome-macros is not used anymore, it may be removed).
+30Jul05
+ - Fix src/lib/bpipe.c:run_program and run_program_full_output to detect if the watchdog
+ killed the program, and return an error if it is the case.
+26Apr05
+ - Modify parse_config to get a LEX_ERROR_HANDLER as a parameter
+ - lex_open_file now returns NULL if the file can't be opened. All calling functions have
+ been adapted.
+ - Remove set_exit_on_error function
+07Apr05
+ - Fix "unknown device type" problem with DVD devices.
+ - Fix crash when there is no media in the DVD drive.
+09Jan05
+ - Update the documentation and ReleaseNotes.
+05Jan05
+ - Add FreeSpaceCommand in Device (SD configuration file) and implement it.
+ - Some modifications (again) on how guessed volume names are handled (now it should work).
+ - Part files on the hard disk are removed if they are empty.
+04Jan05
+ - Major fixes on how guessed volume names are handled.
+ - Minor fix in src/stored/append.c.
+ - Replace, when possible, POOLMEM by POOL_MEM in the new code of src/stored/dev.c.
+ - New script, scripts/dvd-freespace, which gets the free space available on a writable DVD.
+03Jan05
+ - Add WritePartAfterJob directive in Job resource (Director)
+ - Add WritePartAfterJob directive in Schedule Resource (Director)
+ - Implement these new directives
+02Jan05
+ - New function, open_guess_name_dev in src/stored/dev.c, which tries to guess the volume
+ name of a mounted device, so the label can be read.
+ - New script, scripts/dvd-writepart, which write parts to DVD+/-R(W).
+ - Removed WriteFirstPartCommand directive in Device (SD configuration file).
+ - Use readdir_r instead of readdir (src/stored/dev.c:open_guess_name_dev).
+01Jan05
+ - Add RequiresMount, MountPoint, MountCommand, UnmountCommand directives in Device (SD configuration file).
+ - Implement these directives (volumes can now be restored from a manually written DVD).
+ - Add WriteFirstPartCommand, WritePartCommand directives in Device (SD configuration file).
+ - Implement these directives (DVD writing now works).
+ - New function run_program_full_output in src/lib/bpipe.c.
+ - Lots of bugfixes and cleanups in the new code.
+29Dec04
+ - Add VolParts field in Media table
+ - Add MaximumPartSize directive in Device (SD configuration file)
+ - File Volumes can now be splitted in multiple files ("parts")
+ - Fix SQL error in sql_list while doing "llist jobmedia"
- Release Notes for Bacula 1.37.40
+ Release Notes for Bacula 1.38.0
- Bacula code: Total files = 420 Total lines = 138,212 (*.h *.c *.in)
+ Bacula code: Total files = 420 Total lines = 138,440 (*.h *.c *.in)
+ 20,440 additional lines of code since version 1.36.3
Major Changes:
- Fixed out of order Volumes in restore.
- Improved algorithm for reserving drives in multiple drive
- autochangers.
+ autochangers. Autochange users MUST use the new Autochanger
+ resource in the Storage daemon.
- There is a new database format that is not compatible
with previous databases. You must upgrade if converting
from 1.36.x. No changes from version 1.37.30.
- The Director, Storage daemon, and File daemons are
- Deamons are not compatible with prior versions.
+ Deamons are not compatible with prior versions.
All FDs must be upgraded at the same time.
-- Multiple drive autochanger support. You *must* update
- your SD conf file.
- Support for ANSI/IBM labels.
-- New communications protocol between DIR and SD to reserve
- drives.
- Faster database inserts due to combining the MD5/SHA1 into
the attributes record, eliminating one INSERT/file backed up.
- Python Event support has been added. See below for
- configuration and details. Unfortunately, it is not yet complete
- and the only really useful function is defining a new
- Volume name.
-- DVD writing support, using parts, and a lot of new directives in
+ configuration and details. The implementation is somewhat minimal,
+ so the functionality is not complete. The Python interface
+ has not been extensively tested, so please consider it BETA.
+- DVD writing support, using parts, and some new directives in
the Device resource of the Storage configuration file thanks
to Nicolas Boichat. Please note that this code is still
- experimental and should be carefully tested before using in
+ BETA and should be carefully tested before using in
production.
- Seven new options keywords in a FileSet resource:
ignorecase, fstype, hfsplussupport, wilddir, wildfile, regexdir,
records have been removed from the catalog.
- Restore of a directory (non-recursive, i.e. only one level).
- Support for TLS (ssl) between all the daemon connections thanks
- to Landon Fuller. This is mostly untested.
+ to Landon Fuller.
- Any Volume in the Pool named Scratch may be reassigned to any
other Pool when a new Volume is needed.
- You may clone a Job and thus write (almost) the same data
turn on VSS with "Enable VSS = yes" in your FileSet resource.
- New manual format with an index (thanks to Karl Cunningham).
- New Web site format (thanks to Michael Scherer).
-- SQLite3 support, but it seems to run at 1/2 to 1/4 the speed of
- SQLite2.
+- SQLite3 support.
- Web-bacula, previously a separate project by Juan Luis Frances,
- is now included in the Bacula GUI release (yet to be fully
- created).
+ is now included in the Bacula GUI release. This is a management
+ level tool for reporting the state of Bacula jobs.
- The code is now Internationalized so that it can be localized
in native languages. Thanks to Nicolas Boichat.
and differential jobs. The since=... is ignored when level=Full.
A cloned job will not start additional clones, so it is not possible
to recurse.
-- New Options keywords in a FileSet directive:
+- New Options keywords in a FileSet directive (backported to 1.36.3):
- WildDir xxx
Will do a wild card match against directories (files will not
be matched).
required only if you do not want the default /usr/share.
Items to note!!!
-- If you use an Autochanger, you *must* update your SD conf file
+- If you use an Autochanger, you MUST update your SD conf file
to use the new Autochanger resource. Otherwise, certain commands
such as "update slots" may not work.
- You must add --with-python=[DIR] to the configure command line
Other Items:
- Security fixes for temp files created in mtx-changer, during
./configure, and during making of Rescue disk.
-- 2 new scripts, dvd-writepart and dvd-freespace, in the scripts directory,
- which are designed to be used as parameters to Write Part Command and
+- A new script, dvd-handler, in the scripts directory,
+ which is designed to be used as parameters to Write Part Command and
Free Space Command. They need the dvd+rw-tools to be installed
- (http://fy.chalmers.se/~appro/linux/DVD+RW/).
+ (http://fy.chalmers.se/~appro/linux/DVD+RW/) AND, the growisofs
+ program must be patched using the
+ <bacula-source>/patches/dvd+rw-tools-5.21.4.10.8.bacula.patch
You must have Python installed to run the scripts.
- Part files support: File volumes can now be split into multiple
files, called "parts".
-
- For the details of the Python scripting support, please see the new
Python Scripting chapter in the manual.
Changes to 1.37.42:
26Oct05
+- Return HARDEOF status from bnet_recv() if bsock NULL rather
+ than aborting.
+- Don't overwrite pthreadVCE.dll or msvcr71.dll during Win32
+ install.
- Update README.win32 instructions.
25Oct05
- Make db_get_job_record() return Name so that the ACL
- Make built-in variables table driven.
- First cut of Python Events for Bacula. Director only.
StartJob, EndJob, NewVolume events.
-
-Version 1.36.1 Released 26Nov04:
-24Nov04
-- Take Dan's fix to the fix_postgresql_tables (thanks Dan)
-- Increase Maximum Concurrent Jobs to 20 in SD and FD!
-- Fix improper handling of autochanger Volumes that are not
- marked InChanger. Bug 170.
-22Nov04
-- Update authentication failure message to indicate possible
- problem with Maximum Concurrent Jobs. Add to doc too.
-- Commit PostgreSQL BIGINT fix -- apparently some people didn't
- get it.
-- Do not use a slot unless it is InChanger in the autochanger
- code, otherwise autochanger gets upset not finding the Volume.
- Bug 170 (need fix above too).
-21Nov04
-- Make authentication timeout compile time configurable.
- The value is set in src/baconfig.h
-- Fix removing items from watchdog queue, which apparently
- screwed up if there was more than one item.
-- Rework mediaformat part of manual to separate out old
- tape format for easier reading.
-- Add a lot of debug code to the authentication code.
-- Add seconds to the start/end times printed in the job report.
-19Nov04
-- Fix mutex deadlock in dequeue of messages.
-- Add debug code to FD authorization.
-18Nov04
-- Increase authentication timeouts to 10 minutes.
-15Nov04
-- Fix cancel bug in FD on /lib/tls with zero pid in
- pthread_kill.
-- Add date/time to all messages.
-- Make Qmsg use time message was queued rather than time
- printed.
-- Indent job output two spaces.
-13Nov04
-- Fix web page links for new manual.
-- Grant postgresql permission to cdimages.
-- Correct crash after "list nextvol" "list media" bug 160
-12Nov04
-- Fix scripts/Makefile.in missing ;\ -- thanks Martin
-- A bit of work on btape to keep if from going into infinite
- loops when things do not work well, and to print a bit
- better info.
-11Nov04
-- JobDefs Storage resource completely overrode anything
- specified in Job resource -- bug 159 -- fixed.
-- Fix syntax of renaming postgresql per Dan.
-- Add working_directory to be /tmp for wx_console.
-10Nov04
-- Allow both a JobId and a filename or list of files to be
- specified on a restore command line.
-- Save old mtx-changer before installing new one: bug 156
-- Fix errors in CDROM file pointed out by Scott.
-09Nov04
-- Fix exepath when Bacula executed without path.
-- Move test for socket libraries for Solaris in configure.in
- before tcp wrapper tests so that linking works.
-- Add "make copy-static-fd" to makefile in CDROM file to
- copy existing static fd to CDROM rather than building it.
-08Nov04
-- More doc updates
-- Fix ps command for OpenBSD
-- Rework the creation of indexes for SQL -- fall back
- to the old code, but document what can be added.
-06Nov04
-- Add new Daemon message handler in default DIR conf.
-05Nov04
-- Fix Seg Fault with -D100 in bpipe.c.
-- Fix Seg Fault in run specifying a JobId.
-- Make mail from daemon with a Messages Resource use
- the MailCommand with editing rather than the default
- sendmail.
-- Replace Jmsg in dispatch_message() with Qmsg.
-- Make edit_job_codes handle NULL jcr.
-04Nov04
-- Add M_ALERT class and put tape alerts into it.
-- Fix Verify count vs found by not double counting files
- that are split across files/Volumes.
-30Oct04
-- Fix count returned from write_bsr_file() to handle multiple
- volumes. This fixes most cases of the Verify VolumeToCatalog.
-- Cleanup a bit the make clean for the rescue cdrom and remove
- unneeded files from the CVS.
-28Oct04
-- Fixed acquiring a tape so that it does not block all acquires
- when operator intervention is needed.
-- Platform build script updates from Scott
-- Doc updates
-- Add patch to force Linux LD_ASSUME_KERNEL to avoid using the
- new /lib/tls. This is done in the startup scripts.
-- Modify mtx-changer so that it checks for ONLINE while
- waiting.
-- Modify make_postgresql_tables.in so that EndBlock is stored
- as a bigint. Prevents job failures when a disk volume is
- larger than 2GB.
-24Oct04
-- Add grep ONLINE to wait_for_drive() in mtx-changer.in
-- More doc.
-- Rebuild Scott's new configure
*
* alist is a simple malloc'ed array of pointers. For the moment,
* it simply malloc's a bigger array controlled by num_grow.
- * Default is to realloc the pointer array for each new member.
+ * Default is to realloc the pointer array for each new member.
*
* Kern Sibbald, June MMIII
*
*
*/
/*
- Copyright (C) 2000-2004 Kern Sibbald and John Walker
+ Copyright (C) 2003-2005 Kern Sibbald
This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
+ modify it under the terms of the GNU General Public License
+ version 2 as amended with additional clauses defined in the
+ file LICENSE in the main source directory.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- MA 02111-1307, USA.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ the file LICENSE for additional details.
*/
{
if (num_items == 0) {
if (num_grow == 0) {
- num_grow = 1; /* default if not initialized */
+ num_grow = 1; /* default if not initialized */
}
items = (void **)malloc(num_grow * sizeof(void *));
max_items = num_grow;
{
if (items) {
if (own_items) {
- for (int i=0; i<num_items; i++) {
- free(items[i]);
- items[i] = NULL;
- }
+ for (int i=0; i<num_items; i++) {
+ free(items[i]);
+ items[i] = NULL;
+ }
}
free(items);
items = NULL;
/*
* Version $Id$
+ *
+ * Kern Sibbald, June MMIII
*/
-
/*
Copyright (C) 2003-2005 Kern Sibbald
This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
+ modify it under the terms of the GNU General Public License
+ version 2 as amended with additional clauses defined in the
+ file LICENSE in the main source directory.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- MA 02111-1307, USA.
-
- Kern Sibbald, June MMIII
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ the file LICENSE for additional details.
*/
+
/*
* There is a lot of extra casting here to work around the fact
* that some compilers (Sun and Visual C++) do not accept
#ifdef the_easy_way
#define foreach_alist(var, list) \
- for((void*(var))=(list)->first(); (var); (void *(var))=(list)->next(var)); )
+ for(((void*)(var))=(list)->first(); (var); ((void*)(var))=(list)->next(var)); )
#endif
int32_t nbytes;
int32_t pktsiz;
- ASSERT(bsock != NULL);
+ if (!bsock) {
+ return BNET_HARDEOF;
+ }
bsock->msg[0] = 0;
bsock->msglen = 0;
if (bsock->errors || bsock->terminated) {
* If there are multiple devices, the director sends us
* use_device for each device that it wants to use.
*/
- Dmsg1(100, "<dird: %s", dir->msg);
jcr->dirstore = New(alist(10, not_owned_by_alist));
do {
+ Dmsg1(100, "<dird: %s", dir->msg);
ok = sscanf(dir->msg, use_storage, store_name.c_str(),
media_type.c_str(), pool_name.c_str(),
pool_type.c_str(), &append, &Copy, &Stripe) == 7;
/* Now get all devices */
while (bnet_recv(dir) >= 0) {
+ Dmsg1(100, "<dird device: %s", dir->msg);
ok = sscanf(dir->msg, use_device, dev_name.c_str()) == 1;
if (!ok) {
break;
; Shutdown any bacula that could be running
ExecWait '"$INSTDIR\bin\bacula-fd.exe" /kill'
; give it some time to shutdown
- Sleep 1000
+ Sleep 3000
NoUpgrade:
; Set output path to the installation directory.
StrCmp $R0 "false" do_win98
MessageBox MB_YESNO|MB_ICONQUESTION "Would you like to start the Bacula Client now?" IDNO SetPerms
Exec 'net start bacula'
+ Sleep 3000
SetPerms:
; set default permissions on config file so it's not world readable
Exec 'cmd /C echo Y|cacls "$INSTDIR\bin\bacula-fd.conf" /G SYSTEM:F Administrators:F'
MessageBox MB_YESNO|MB_ICONQUESTION "Would you like to start the Bacula Client now?" IDNO NoStart
Start:
Exec '"$INSTDIR\bin\bacula-fd.exe" -c "$INSTDIR\bin\bacula-fd.conf"'
+ Sleep 3000
NoStart:
SectionEnd
Section "Install Console" SecConsole
SetOutPath "$INSTDIR\bin"
File console\Release\bconsole.exe
+ IfFileExists "$INSTDIR\bin\pthreadVCE.dll" msvcr711
File ..\..\..\depkgs-win32\pthreads\pthreadVCE.dll
+ msvcr711:
+ IfFileExists "$INSTDIR\bin\msvcr71.dll" testconf1
File c:\windows\system32\msvcr71.dll
+ testconf1:
IfFileExists "$INSTDIR\bin\bconsole.conf" newconf
File console\bconsole.conf
goto do_next
Section "Install wx-Console" SecWxConsole
SetOutPath "$INSTDIR\bin"
File wx-console\Release\wx-console.exe
+ IfFileExists "$INSTDIR\bin\pthreadVCE.dll" msvcr712
File ..\..\..\depkgs-win32\pthreads\pthreadVCE.dll
+ msvcr712:
+ IfFileExists "$INSTDIR\bin\msvcr71.dll" testconf2
File c:\windows\system32\msvcr71.dll
+ testconf2:
IfFileExists "$INSTDIR\bin\wx-console.conf" newconf
File wx-console\wx-console.conf
goto do_next
projects / bacula / bacula / commitdiff