From: Stefan Roese Date: Thu, 25 Apr 2013 23:20:23 +0000 (+0000) Subject: mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes X-Git-Tag: v2013.07-rc1~18^2~5^2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;ds=sidebyside;h=8aa34499727936ede3f85033380720b4a9522aaa;p=u-boot mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes The changes to a3m071/a4m2k in summary are: - Enable CAN1 on I2C in GPS Port Configuration - Enable SPI on PSC2 - Activate network console - New flash partitioning - Fix some typos - Pass host name to Linux - Change rootfs to squashfs,jffs2 - Enable UBI/UBIFS support - Enable FIT support Signed-off-by: Stefan Roese --- diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c index 0f9f883e90..c62ba62172 100644 --- a/board/a3m071/a3m071.c +++ b/board/a3m071/a3m071.c @@ -8,7 +8,7 @@ * (C) Copyright 2006 * MicroSys GmbH * - * Copyright 2012 Stefan Roese + * Copyright 2012-2013 Stefan Roese * * See file CREDITS for list of people who contributed to this * project. @@ -241,12 +241,26 @@ void spl_board_init(void) /* And write new value back to register */ out_be32(&mm->ipbi_ws_ctrl, val); -#endif - /* - * No need to change the pin multiplexing (MPC5XXX_GPS_PORT_CONFIG) - * as all 3 config versions (failsave level) have the same setup. - */ + + /* Setup pin multiplexing */ + if (failsavelevel == 2) { + /* fpga-version ok */ +#if defined(CONFIG_SYS_GPS_PORT_CONFIG_2) + out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG_2); +#endif + } else if (failsavelevel == 1) { + /* digiboard-version ok - fpga not */ +#if defined(CONFIG_SYS_GPS_PORT_CONFIG_1) + out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG_1); +#endif + } else { + /* full failsave-mode */ +#if defined(CONFIG_SYS_GPS_PORT_CONFIG) + out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG); +#endif + } +#endif /* * Setup gpio_wkup_7 as watchdog AS INPUT to disable it - see diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index 1c055a3b98..e9af825663 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -1,5 +1,5 @@ /* - * Copyright 2012 Stefan Roese + * Copyright 2012-2013 Stefan Roese * * See file CREDITS for list of people who contributed to this * project. @@ -59,6 +59,38 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_MII #define CONFIG_CMD_REGINFO +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_SERVERIP +#define CONFIG_BOOTP_MAY_FAIL +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SERVERIP +#define CONFIG_NET_RETRY_COUNT 3 +#define CONFIG_CMD_LINK_LOCAL +#define CONFIG_NETCONSOLE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_CMD_PING +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS /* needed for UBI */ +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=fc000000.flash" +#define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:512k(u-boot)," \ + "256k(env)," \ + "128k(hwinfo)," \ + "1M(nvramsim)," \ + "128k(dtb)," \ + "5M(kernel)," \ + "128k(sysinfo)," \ + "7552k(root)," \ + "4M(app)," \ + "13568k(data)" +#define CONFIG_LZO /* needed for UBI */ +#define CONFIG_RBTREE /* needed for UBI */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_FIT /* * IPB Bus clocking configuration. @@ -88,7 +120,7 @@ */ #define CONFIG_SYS_FLASH_BASE 0xfc000000 #define CONFIG_SYS_FLASH_SIZE 0x02000000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x80000) #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 @@ -110,6 +142,8 @@ #define CONFIG_ENV_SIZE 0x10000 #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) /* * Memory map @@ -128,8 +162,8 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_SYS_MALLOC_LEN (1 << 20) +#define CONFIG_SYS_MONITOR_LEN (512 << 10) +#define CONFIG_SYS_MALLOC_LEN (4 << 20) #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* @@ -155,14 +189,14 @@ */ #ifdef CONFIG_A4M2K -#define CONFIG_SYS_GPS_PORT_CONFIG 0x0005C805 +#define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C805 #else /* for failsave-level 0 - full failsave */ #define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C005 /* for failsave-level 1 - only digiboard ok */ -#define CONFIG_SYS_GPS_PORT_CONFIG_1 0x1005C005 +#define CONFIG_SYS_GPS_PORT_CONFIG_1 0x1005C065 /* for failsave-level 2 - all ok */ -#define CONFIG_SYS_GPS_PORT_CONFIG_2 0x1005C005 +#define CONFIG_SYS_GPS_PORT_CONFIG_2 0x1005C065 #endif #define CONFIG_WDOG_GPIO_PIN GPIO_WKUP_7 @@ -172,10 +206,10 @@ /* * Configuration matrix - * MSB LSB + * MSB LSB * failsave 0 0x1005C005 00010000000001011100000000000101 ( full failsave ) - * failsave 1 0x1005C005 00010000000001011100000000000101 ( digib.-ver ok ) - * failsave 2 0x1005C005 00010000000001011100000000000101 ( all ok ) + * failsave 1 0x1005C065 00010000000001011100000001100101 ( digib.-ver ok ) + * failsave 2 0x1005C065 00010000000001011100000001100101 ( all ok ) * || ||| || | ||| | | | | * || ||| || | ||| | | | | bit rev name * ++-+++-++--+---+++-+---+---+---+- 0 31 CS1 @@ -311,10 +345,12 @@ * Environment Configuration */ -#define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */ +#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS #define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_SYS_AUTOLOAD "n" + #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \ "echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \ @@ -322,11 +358,10 @@ #undef CONFIG_BOOTARGS -#define CONFIG_SYS_OS_BASE 0xfc080000 -#define CONFIG_SYS_FDT_BASE 0xfc060000 +#define CONFIG_SYS_OS_BASE 0xfc200000 +#define CONFIG_SYS_FDT_BASE 0xfc1e0000 #define CONFIG_EXTRA_ENV_SETTINGS \ - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ "netdev=eth0\0" \ "verify=no\0" \ "loadaddr=200000\0" \ @@ -343,29 +378,31 @@ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2\0" \ + "mtdargs=setenv bootargs root=/dev/mtdblock7 " \ + "rootfstype=squashfs,jffs2\0" \ + "addhost=setenv bootargs ${bootargs} " \ + "hostname=${hostname}\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} " \ "console=${consoledev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdtaddr}\0" \ - "flash_mtd=run mtdargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdtaddr}\0" \ - "flash_self=run ramargs addip addtty;" \ + "flash_nfs=run nfsargs addip addtty addhost;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "flash_mtd=run mtdargs addip addtty addhost;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "flash_self=run ramargs addip addtty addhost;" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ + "run nfsargs addip addtty addhost;" \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME) \ "/u-boot-img.bin\0" \ - "update=protect off fc000000 fc03ffff; " \ - "era fc000000 fc03ffff; cp.b ${loadaddr} fc000000 40000\0" \ + "update=protect off fc000000 fc07ffff; " \ + "era fc000000 fc07ffff;" \ + "cp.b ${loadaddr} fc000000 ${filesize}\0" \ "upd=run load;run update\0" \ - "bootdelay=3\0" \ - "bootcmd=run net_nfs\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_mtd"