From: Stefano Babic Date: Thu, 27 Jun 2013 09:42:38 +0000 (+0200) Subject: tools: add support for setting the CSF into imximage X-Git-Tag: v2013.10-rc3~8^2~4^2~10 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=0187c985aa870a74caeecd3bd10244322b7e4d99;p=u-boot tools: add support for setting the CSF into imximage Add support for setting the CSF (Command Sequence File) pointer which is used for HAB (High Assurance Boot) in the imximage by adding e.g. CSF 0x2000 in the imximage.cfg file. This will set the CSF pointer accordingly just after the padded data image area. The boot_data.length is adjusted with the value from the imximage.cfg config file. The resulting u-boot.imx can be signed with the FSL HAB tooling. The generated CSF block needs to be appended to the u-boot.imx. Signed-off-by: Stefano Babic --- diff --git a/doc/README.imximage b/doc/README.imximage index 802eb90f1d..dcda2005af 100644 --- a/doc/README.imximage +++ b/doc/README.imximage @@ -15,9 +15,6 @@ Booting from NOR flash does not require to use this image type. For more details refer Chapter 2 - System Boot and section 2.14 (flash header description) of the processor's manual. -This implementation does not use at the moment the secure boot feature -of the processor. The image is generated disabling all security fields. - Command syntax: -------------- ./tools/mkimage -l @@ -86,6 +83,33 @@ Configuration command line syntax: Example: BOOT_FROM spi + CSF value + + Total size of CSF (Command Sequence File) + used for Secure Boot/ High Assurance Boot + (HAB). + + Using this command will populate the IVT + (Initial Vector Table) CSF pointer and adjust + the length fields only. The CSF itself needs + to be generated with Freescale tools and + 'manually' appended to the u-boot.imx file. + + The CSF is then simply concatenated + to the u-boot image, making a signed bootloader, + that the processor can verify + if the fuses for the keys are burned. + + Further infos how to configure the SOC to verify + the bootloader can be found in the "High + Assurance Boot Version Application Programming + Interface Reference Manual" as part of the + Freescale Code Signing Tool, available on the + manufacturer's website. + + Example: + CSF 0x2000 + DATA type address value type: word=4, halfword=2, byte=1 diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab new file mode 100644 index 0000000000..97f8b7d743 --- /dev/null +++ b/doc/README.mxc_hab @@ -0,0 +1,48 @@ +High Assurance Boot (HAB) for i.MX6 CPUs + +To authenticate U-Boot only by the CPU there is no code required in +U-Boot itself. However, the U-Boot image to be programmed into the +boot media needs to be properly constructed, i.e. it must contain a +proper Command Sequence File (CSF). + +The Initial Vector Table contains a pointer to the CSF. Please see +doc/README.imximage for how to prepare u-boot.imx. + +The CSF itself is being generated by Freescale HAB tools. + +mkimage will output additional information about "HAB Blocks" +which can be used in the Freescale tooling to authenticate U-Boot +(entries in the CSF file). + +Image Type: Freescale IMX Boot Image +Image Ver: 2 (i.MX53/6 compatible) +Data Size: 327680 Bytes = 320.00 kB = 0.31 MB +Load Address: 177ff420 +Entry Point: 17800000 +HAB Blocks: 177ff400 00000000 0004dc00 + ^^^^^^^^ ^^^^^^^^ ^^^^^^^^ + | | | + | | -------- (1) + | | + | ------------------- (2) + | + --------------------------- (3) + +(1) Size of area in file u-boot.imx to sign + This area should include the IVT, the Boot Data the DCD + and U-Boot itself. +(2) Start of area in u-boot.imx to sign +(3) Start of area in RAM to authenticate + +CONFIG_SECURE_BOOT currently enables only an additional command +'hab_status' in U-Boot to retrieve the HAB status and events. This +can be useful while developing and testing HAB. + +Commands to generate a signed U-Boot using Freescale HAB tools: +cst --o U-Boot_CSF.bin < U-Boot.CSF +objcopy -I binary -O binary --pad-to 0x2000 --gap-fill=0x00 \ + U-Boot_CSF.bin U-Boot_CSF_pad.bin +cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx + +NOTE: U-Boot_CSF.bin needs to be padded to the value specified in +the imximage.cfg file. diff --git a/tools/imximage.c b/tools/imximage.c index 26460bfecb..3f2dc68eb3 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -16,6 +16,8 @@ #include #include "imximage.h" +#define UNDEFINED 0xFFFFFFFF + /* * Supported commands for configuration file */ @@ -23,6 +25,7 @@ static table_entry_t imximage_cmds[] = { {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, {CMD_BOOT_OFFSET, "BOOT_OFFSET", "Boot offset", }, {CMD_DATA, "DATA", "Reg Write Data", }, + {CMD_CSF, "CSF", "Command Sequence File", }, {CMD_IMAGE_VERSION, "IMAGE_VERSION", "image version", }, {-1, "", "", }, }; @@ -66,8 +69,13 @@ static table_entry_t imximage_versions[] = { static struct imx_header imximage_header; static uint32_t imximage_version; -/* Image Vector Table Offset */ -static uint32_t imximage_ivt_offset; +/* + * Image Vector Table Offset + * Initialized to a wrong not 4-bytes aligned address to + * check if it is was set by the cfg file. + */ +static uint32_t imximage_ivt_offset = UNDEFINED; +static uint32_t imximage_csf_size = UNDEFINED; /* Initial Load Region Size */ static uint32_t imximage_init_loadsize; @@ -76,6 +84,7 @@ static set_dcd_rst_t set_dcd_rst; static set_imx_hdr_t set_imx_hdr; static uint32_t max_dcd_entries; static uint32_t *header_size_ptr; +static uint32_t *csf_ptr; static uint32_t get_cfg_value(char *token, char *name, int linenr) { @@ -247,9 +256,10 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, + offsetof(imx_header_v2_t, boot_data); hdr_v2->boot_data.start = entry_point - imximage_init_loadsize; - /* Security feature are not supported */ fhdr_v2->csf = 0; + header_size_ptr = &hdr_v2->boot_data.size; + csf_ptr = &fhdr_v2->csf; } static void set_hdr_func(struct imx_header *imxhdr) @@ -326,6 +336,13 @@ static void print_hdr_v2(struct imx_header *imx_hdr) genimg_print_size(hdr_v2->boot_data.size); printf("Load Address: %08x\n", (uint32_t)fhdr_v2->boot_data_ptr); printf("Entry Point: %08x\n", (uint32_t)fhdr_v2->entry); + if (fhdr_v2->csf && (imximage_ivt_offset != UNDEFINED) && + (imximage_csf_size != UNDEFINED)) { + printf("HAB Blocks: %08x %08x %08x\n", + (uint32_t)fhdr_v2->self, 0, + hdr_v2->boot_data.size - imximage_ivt_offset - + imximage_csf_size); + } } static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token, @@ -386,6 +403,17 @@ static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token, if (unlikely(cmd_ver_first != 1)) cmd_ver_first = 0; break; + case CMD_CSF: + if (imximage_version != 2) { + fprintf(stderr, + "Error: %s[%d] - CSF only supported for VERSION 2(%s)\n", + name, lineno, token); + exit(EXIT_FAILURE); + } + imximage_csf_size = get_cfg_value(token, name, lineno); + if (unlikely(cmd_ver_first != 1)) + cmd_ver_first = 0; + break; } } @@ -537,6 +565,7 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, imximage_version = IMXIMAGE_V1; /* Be able to detect if the cfg file has no BOOT_FROM tag */ imximage_ivt_offset = FLASH_OFFSET_UNDEFINED; + imximage_csf_size = 0; set_hdr_func(imxhdr); /* Parse dcd configuration file */ @@ -555,6 +584,12 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, * The remaining fraction of a block bytes would not be loaded! */ *header_size_ptr = ROUND(sbuf->st_size, 4096); + + if (csf_ptr && imximage_csf_size) { + *csf_ptr = params->ep - imximage_init_loadsize + + *header_size_ptr; + *header_size_ptr += imximage_csf_size; + } } int imximage_check_params(struct mkimage_params *params) diff --git a/tools/imximage.h b/tools/imximage.h index bb04a43200..efe6a88d9e 100644 --- a/tools/imximage.h +++ b/tools/imximage.h @@ -52,7 +52,8 @@ enum imximage_cmd { CMD_IMAGE_VERSION, CMD_BOOT_FROM, CMD_BOOT_OFFSET, - CMD_DATA + CMD_DATA, + CMD_CSF, }; enum imximage_fld_types {