From: oliver@schinagl.nl <oliver@schinagl.nl>
Date: Tue, 8 Nov 2016 16:38:57 +0000 (+0100)
Subject: net: phy: realtek: Use the BIT() macro
X-Git-Tag: v2017.01-rc2~44
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=020f67628d7f3e8f1c3ca93e8388d6b5ee128ec2;p=u-boot

net: phy: realtek: Use the BIT() macro

The BIT macro is the preferred method to set bits.
This patch adds the bit macro and converts bit invocations.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
---

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 7a99cb0234..35b934b8f0 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -9,13 +9,14 @@
  */
 #include <config.h>
 #include <common.h>
+#include <linux/bitops.h>
 #include <phy.h>
 
 #define PHY_AUTONEGOTIATE_TIMEOUT 5000
 
 /* RTL8211x 1000BASE-T Control Register */
-#define MIIM_RTL8211x_CTRL1000T_MSCE (1 << 12);
-#define MIIM_RTL8211X_CTRL1000T_MASTER (1 << 11);
+#define MIIM_RTL8211x_CTRL1000T_MSCE BIT(12);
+#define MIIM_RTL8211X_CTRL1000T_MASTER BIT(11);
 
 /* RTL8211x PHY Status Register */
 #define MIIM_RTL8211x_PHY_STATUS       0x11