From: Jagannadha Sutradharudu Teki Date: Wed, 8 Jan 2014 20:18:12 +0000 (+0530) Subject: zynq: Add zynq zc70x board support X-Git-Tag: v2014.01-rc3~9^2~19 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=022b02064a04d5edf2dc8e7cdf666421eed9d888;p=u-boot zynq: Add zynq zc70x board support The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded processing includes ASIC and FPGA design. ZC702-: APSOC: - XC7Z020-CLG484-1 Memory: - DDR3 Component Memory 1GB - 16MB Quad SPI Flash - IIC - 1 KB EEPROM Connectivity: - Gigabit Ethernet GMII, RGMII and SGMII. - USB OTG - Host USB - IIC Bus Headers/HUB - 1 CAN with Wake on CAN - USB-UART Video/Display: - HDMI Video OUT - 8X LEDs Control & I/O: - 3 User Push Buttons - 2 User Switches - 8 User LEDs For more info on zc702 board: - http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm ZC706-: APSOC: - XC7Z045 FFG900 -2 AP SoC Memory: - DDR3 Component Memory 1GB (PS) - DDR3 SODIM Memory 1GB (PL) - 2X16MB Quad SPI Flash (dual parallel) - IIC - 1 KB EEPROM Connectivity: - PCIe Gen2x4 - SFP+ and SMA Pairs - GigE RGMII Ethernet (PS) - USB OTG 1 (PS) - Host USB - IIC Bus Headers/HUB (PS) - 1 CAN with Wake on CAN (PS) - USB-UART Video/Display: - HDMI 8 color RGB 4.4.4 1080P-60 OUT - HDMI IN 8 color RGB 4.4.4 Control & I/O: - 2 User Push Buttons/Dip Switch, 2 User LEDs - IIC access to GPIO - SDIO (SD Card slot) - 3 User Push Buttons, 2 User Switches, 8 User LEDs For more info on zc706 board: - http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm Signed-off-by: Jagannadha Sutradharudu Teki --- diff --git a/boards.cfg b/boards.cfg index 9e85fe0e23..51090ae384 100644 --- a/boards.cfg +++ b/boards.cfg @@ -357,6 +357,7 @@ Active arm armv7 socfpga altera socfpga Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang +Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek :Jagannadha Sutradharudu Teki Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Alban Bedel Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Alban Bedel diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 9fe06e8459..bce1094f6d 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -36,7 +36,6 @@ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} /* Zynq Serial driver */ -#define CONFIG_ZYNQ_SERIAL_UART1 #ifdef CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000 # define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE @@ -60,8 +59,6 @@ #endif /* Ethernet driver */ -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) # define CONFIG_NET_MULTI # define CONFIG_ZYNQ_GEM @@ -71,7 +68,6 @@ # define CONFIG_PHY_MARVELL #endif -#define CONFIG_ZYNQ_SPI /* SPI */ #ifdef CONFIG_ZYNQ_SPI # define CONFIG_SPI_FLASH @@ -79,10 +75,6 @@ # define CONFIG_CMD_SF #endif -/* NOR */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_ZYNQ_SDHCI0 /* MMC */ #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) # define CONFIG_MMC @@ -96,7 +88,6 @@ # define CONFIG_DOS_PARTITION #endif -#define CONFIG_ZYNQ_I2C0 /* I2C */ #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) # define CONFIG_CMD_I2C diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h new file mode 100644 index 0000000000..99108041ff --- /dev/null +++ b/include/configs/zynq_zc70x.h @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2013 Xilinx, Inc. + * + * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards + * See zynq_common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_ZC70X_H +#define __CONFIG_ZYNQ_ZC70X_H + +#define CONFIG_ZYNQ_SERIAL_UART1 +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_I2C0 +#define CONFIG_ZYNQ_BOOT_FREEBSD + +#include + +#endif /* __CONFIG_ZYNQ_ZC70X_H */