From: Mike Frysinger Date: Sun, 2 Oct 2011 10:01:25 +0000 (+0000) Subject: net: drop !NET_MULTI bcm570x/tigon3 drivers X-Git-Tag: v2011.12-rc1~579 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=029cf6b4b2a1e590b5baf0281cef1d49266d6640;p=u-boot net: drop !NET_MULTI bcm570x/tigon3 drivers These drivers have never been converted to NET_MULTI, and they are only used by one board (BMW). So drop the drivers until someone feels like rewriting them for NET_MULTI support. Rather than punting the BMW board completely, just disable net support in its board config. Seems to build fine without it. Signed-off-by: Mike Frysinger --- diff --git a/drivers/net/5701rls.c b/drivers/net/5701rls.c deleted file mode 100644 index 86950d0f82..0000000000 --- a/drivers/net/5701rls.c +++ /dev/null @@ -1,46 +0,0 @@ -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* History: */ -/* */ -/******************************************************************************/ - -#if INCLUDE_5701_AX_FIX - -#include "bcm570x_mm.h" -#include "5701rls.h" - -LM_STATUS LM_LoadRlsFirmware(PLM_DEVICE_BLOCK pDevice) -{ - T3_FWIMG_INFO FwImgInfo; - - FwImgInfo.StartAddress = t3FwStartAddr; - FwImgInfo.Text.Buffer = (PLM_UINT8)t3FwText; - FwImgInfo.Text.Offset = t3FwTextAddr; - FwImgInfo.Text.Length = t3FwTextLen; - FwImgInfo.ROnlyData.Buffer = (PLM_UINT8)t3FwRodata; - FwImgInfo.ROnlyData.Offset = t3FwRodataAddr; - FwImgInfo.ROnlyData.Length = t3FwRodataLen; - FwImgInfo.Data.Buffer = (PLM_UINT8)t3FwData; - FwImgInfo.Data.Offset = t3FwDataAddr; - FwImgInfo.Data.Length = t3FwDataLen; - - if (LM_LoadFirmware(pDevice, - &FwImgInfo, - T3_RX_CPU_ID | T3_TX_CPU_ID, - T3_RX_CPU_ID) != LM_STATUS_SUCCESS) - { - return LM_STATUS_FAILURE; - } - - return LM_STATUS_SUCCESS; -} - -#endif /* INCLUDE_5701_AX_FIX */ diff --git a/drivers/net/5701rls.h b/drivers/net/5701rls.h deleted file mode 100644 index 30b127a429..0000000000 --- a/drivers/net/5701rls.h +++ /dev/null @@ -1,198 +0,0 @@ -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* History: */ -/******************************************************************************/ - -typedef unsigned long U32; -int t3FwReleaseMajor = 0x0; -int t3FwReleaseMinor = 0x0; -int t3FwReleaseFix = 0x0; -U32 t3FwStartAddr = 0x08000000; -U32 t3FwTextAddr = 0x08000000; -int t3FwTextLen = 0x9c0; -U32 t3FwRodataAddr = 0x080009c0; -int t3FwRodataLen = 0x60; -U32 t3FwDataAddr = 0x08000a40; -int t3FwDataLen = 0x20; -U32 t3FwSbssAddr = 0x08000a60; -int t3FwSbssLen = 0xc; -U32 t3FwBssAddr = 0x08000a70; -int t3FwBssLen = 0x10; -U32 t3FwText[(0x9c0/4) + 1] = { -0x0, -0x10000003, 0x0, 0xd, 0xd, -0x3c1d0800, 0x37bd3ffc, 0x3a0f021, 0x3c100800, -0x26100000, 0xe000018, 0x0, 0xd, -0x3c1d0800, 0x37bd3ffc, 0x3a0f021, 0x3c100800, -0x26100034, 0xe00021c, 0x0, 0xd, -0x0, 0x0, 0x0, 0x27bdffe0, -0x3c1cc000, 0xafbf0018, 0xaf80680c, 0xe00004c, -0x241b2105, 0x97850000, 0x97870002, 0x9782002c, -0x9783002e, 0x3c040800, 0x248409c0, 0xafa00014, -0x21400, 0x621825, 0x52c00, 0xafa30010, -0x8f860010, 0xe52825, 0xe000060, 0x24070102, -0x3c02ac00, 0x34420100, 0x3c03ac01, 0x34630100, -0xaf820490, 0x3c02ffff, 0xaf820494, 0xaf830498, -0xaf82049c, 0x24020001, 0xaf825ce0, 0xe00003f, -0xaf825d00, 0xe000140, 0x0, 0x8fbf0018, -0x3e00008, 0x27bd0020, 0x2402ffff, 0xaf825404, -0x8f835400, 0x34630400, 0xaf835400, 0xaf825404, -0x3c020800, 0x24420034, 0xaf82541c, 0x3e00008, -0xaf805400, 0x0, 0x0, 0x3c020800, -0x34423000, 0x3c030800, 0x34633000, 0x3c040800, -0x348437ff, 0x3c010800, 0xac220a64, 0x24020040, -0x3c010800, 0xac220a68, 0x3c010800, 0xac200a60, -0xac600000, 0x24630004, 0x83102b, 0x5040fffd, -0xac600000, 0x3e00008, 0x0, 0x804821, -0x8faa0010, 0x3c020800, 0x8c420a60, 0x3c040800, -0x8c840a68, 0x8fab0014, 0x24430001, 0x44102b, -0x3c010800, 0xac230a60, 0x14400003, 0x4021, -0x3c010800, 0xac200a60, 0x3c020800, 0x8c420a60, -0x3c030800, 0x8c630a64, 0x91240000, 0x21140, -0x431021, 0x481021, 0x25080001, 0xa0440000, -0x29020008, 0x1440fff4, 0x25290001, 0x3c020800, -0x8c420a60, 0x3c030800, 0x8c630a64, 0x8f84680c, -0x21140, 0x431021, 0xac440008, 0xac45000c, -0xac460010, 0xac470014, 0xac4a0018, 0x3e00008, -0xac4b001c, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x2000008, -0x0, 0xa0001e3, 0x3c0a0001, 0xa0001e3, -0x3c0a0002, 0xa0001e3, 0x0, 0xa0001e3, -0x0, 0xa0001e3, 0x0, 0xa0001e3, -0x0, 0xa0001e3, 0x0, 0xa0001e3, -0x0, 0xa0001e3, 0x0, 0xa0001e3, -0x0, 0xa0001e3, 0x0, 0xa0001e3, -0x3c0a0007, 0xa0001e3, 0x3c0a0008, 0xa0001e3, -0x3c0a0009, 0xa0001e3, 0x0, 0xa0001e3, -0x0, 0xa0001e3, 0x3c0a000b, 0xa0001e3, -0x3c0a000c, 0xa0001e3, 0x3c0a000d, 0xa0001e3, -0x0, 0xa0001e3, 0x0, 0xa0001e3, -0x3c0a000e, 0xa0001e3, 0x0, 0xa0001e3, -0x0, 0xa0001e3, 0x0, 0xa0001e3, -0x0, 0xa0001e3, 0x0, 0xa0001e3, -0x0, 0xa0001e3, 0x0, 0xa0001e3, -0x0, 0xa0001e3, 0x3c0a0013, 0xa0001e3, -0x3c0a0014, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x27bdffe0, -0x1821, 0x1021, 0xafbf0018, 0xafb10014, -0xafb00010, 0x3c010800, 0x220821, 0xac200a70, -0x3c010800, 0x220821, 0xac200a74, 0x3c010800, -0x220821, 0xac200a78, 0x24630001, 0x1860fff5, -0x2442000c, 0x24110001, 0x8f906810, 0x32020004, -0x14400005, 0x24040001, 0x3c020800, 0x8c420a78, -0x18400003, 0x2021, 0xe000182, 0x0, -0x32020001, 0x10400003, 0x0, 0xe000169, -0x0, 0xa000153, 0xaf915028, 0x8fbf0018, -0x8fb10014, 0x8fb00010, 0x3e00008, 0x27bd0020, -0x3c050800, 0x8ca50a70, 0x3c060800, 0x8cc60a80, -0x3c070800, 0x8ce70a78, 0x27bdffe0, 0x3c040800, -0x248409d0, 0xafbf0018, 0xafa00010, 0xe000060, -0xafa00014, 0xe00017b, 0x2021, 0x8fbf0018, -0x3e00008, 0x27bd0020, 0x24020001, 0x8f836810, -0x821004, 0x21027, 0x621824, 0x3e00008, -0xaf836810, 0x27bdffd8, 0xafbf0024, 0x1080002e, -0xafb00020, 0x8f825cec, 0xafa20018, 0x8f825cec, -0x3c100800, 0x26100a78, 0xafa2001c, 0x34028000, -0xaf825cec, 0x8e020000, 0x18400016, 0x0, -0x3c020800, 0x94420a74, 0x8fa3001c, 0x221c0, -0xac830004, 0x8fa2001c, 0x3c010800, 0xe000201, -0xac220a74, 0x10400005, 0x0, 0x8e020000, -0x24420001, 0xa0001df, 0xae020000, 0x3c020800, -0x8c420a70, 0x21c02, 0x321c0, 0xa0001c5, -0xafa2001c, 0xe000201, 0x0, 0x1040001f, -0x0, 0x8e020000, 0x8fa3001c, 0x24420001, -0x3c010800, 0xac230a70, 0x3c010800, 0xac230a74, -0xa0001df, 0xae020000, 0x3c100800, 0x26100a78, -0x8e020000, 0x18400028, 0x0, 0xe000201, -0x0, 0x14400024, 0x0, 0x8e020000, -0x3c030800, 0x8c630a70, 0x2442ffff, 0xafa3001c, -0x18400006, 0xae020000, 0x31402, 0x221c0, -0x8c820004, 0x3c010800, 0xac220a70, 0x97a2001e, -0x2442ff00, 0x2c420300, 0x1440000b, 0x24024000, -0x3c040800, 0x248409dc, 0xafa00010, 0xafa00014, -0x8fa6001c, 0x24050008, 0xe000060, 0x3821, -0xa0001df, 0x0, 0xaf825cf8, 0x3c020800, -0x8c420a40, 0x8fa3001c, 0x24420001, 0xaf835cf8, -0x3c010800, 0xac220a40, 0x8fbf0024, 0x8fb00020, -0x3e00008, 0x27bd0028, 0x27bdffe0, 0x3c040800, -0x248409e8, 0x2821, 0x3021, 0x3821, -0xafbf0018, 0xafa00010, 0xe000060, 0xafa00014, -0x8fbf0018, 0x3e00008, 0x27bd0020, 0x8f82680c, -0x8f85680c, 0x21827, 0x3182b, 0x31823, -0x431024, 0x441021, 0xa2282b, 0x10a00006, -0x0, 0x401821, 0x8f82680c, 0x43102b, -0x1440fffd, 0x0, 0x3e00008, 0x0, -0x3c040800, 0x8c840000, 0x3c030800, 0x8c630a40, -0x64102b, 0x54400002, 0x831023, 0x641023, -0x2c420008, 0x3e00008, 0x38420001, 0x27bdffe0, -0x802821, 0x3c040800, 0x24840a00, 0x3021, -0x3821, 0xafbf0018, 0xafa00010, 0xe000060, -0xafa00014, 0xa000216, 0x0, 0x8fbf0018, -0x3e00008, 0x27bd0020, 0x0, 0x27bdffe0, -0x3c1cc000, 0xafbf0018, 0xe00004c, 0xaf80680c, -0x3c040800, 0x24840a10, 0x3802821, 0x3021, -0x3821, 0xafa00010, 0xe000060, 0xafa00014, -0x2402ffff, 0xaf825404, 0x3c0200aa, 0xe000234, -0xaf825434, 0x8fbf0018, 0x3e00008, 0x27bd0020, -0x0, 0x0, 0x0, 0x27bdffe8, -0xafb00010, 0x24100001, 0xafbf0014, 0x3c01c003, -0xac200000, 0x8f826810, 0x30422000, 0x10400003, -0x0, 0xe000246, 0x0, 0xa00023a, -0xaf905428, 0x8fbf0014, 0x8fb00010, 0x3e00008, -0x27bd0018, 0x27bdfff8, 0x8f845d0c, 0x3c0200ff, -0x3c030800, 0x8c630a50, 0x3442fff8, 0x821024, -0x1043001e, 0x3c0500ff, 0x34a5fff8, 0x3c06c003, -0x3c074000, 0x851824, 0x8c620010, 0x3c010800, -0xac230a50, 0x30420008, 0x10400005, 0x871025, -0x8cc20000, 0x24420001, 0xacc20000, 0x871025, -0xaf825d0c, 0x8fa20000, 0x24420001, 0xafa20000, -0x8fa20000, 0x8fa20000, 0x24420001, 0xafa20000, -0x8fa20000, 0x8f845d0c, 0x3c030800, 0x8c630a50, -0x851024, 0x1443ffe8, 0x851824, 0x27bd0008, -0x3e00008, 0x0, 0x0, 0x0 }; -U32 t3FwRodata[(0x60/4) + 1] = { -0x35373031, 0x726c7341, 0x0, -0x0, 0x53774576, 0x656e7430, 0x0, -0x726c7045, 0x76656e74, 0x31000000, 0x556e6b6e, -0x45766e74, 0x0, 0x0, 0x0, -0x0, 0x66617461, 0x6c457272, 0x0, -0x0, 0x4d61696e, 0x43707542, 0x0, -0x0, 0x0 }; -U32 t3FwData[(0x20/4) + 1] = { -0x0, 0x0, 0x0, -0x0, 0x0, 0x0, 0x0, -0x0, 0x0 }; diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1f9436053a..2651e5f3f5 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -31,9 +31,6 @@ COBJS-$(CONFIG_ALTERA_TSE) += altera_tse.o COBJS-$(CONFIG_ARMADA100_FEC) += armada100_fec.o COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o -COBJS-$(CONFIG_BCM570x) += bcm570x.o -COBJS-$(CONFIG_BCM570x) += bcm570x_autoneg.o -COBJS-$(CONFIG_BCM570x) += 5701rls.o COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o COBJS-$(CONFIG_CS8900) += cs8900.o COBJS-$(CONFIG_TULIP) += dc2114x.o @@ -76,9 +73,6 @@ COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o COBJS-$(CONFIG_SH_ETHER) += sh_eth.o COBJS-$(CONFIG_SMC91111) += smc91111.o COBJS-$(CONFIG_SMC911X) += smc911x.o -COBJS-$(CONFIG_TIGON3) += tigon3.o -COBJS-$(CONFIG_TIGON3) += bcm570x_autoneg.o -COBJS-$(CONFIG_TIGON3) += 5701rls.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o COBJS-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o COBJS-$(CONFIG_FMAN_ENET) += fsl_mdio.o diff --git a/drivers/net/bcm570x.c b/drivers/net/bcm570x.c deleted file mode 100644 index c250d446f1..0000000000 --- a/drivers/net/bcm570x.c +++ /dev/null @@ -1,1598 +0,0 @@ -/* - * Broadcom BCM570x Ethernet Driver for U-Boot. - * Support 5701, 5702, 5703, and 5704. Single instance driver. - * Copyright (C) 2002 James F. Dougherty (jfd@broadcom.com) - */ - -#include - -#ifdef CONFIG_BMW -#include -#endif -#include -#include "bcm570x_mm.h" -#include "bcm570x_autoneg.h" -#include -#include - -/* - * PCI Registers and definitions. - */ -#define PCI_CMD_MASK 0xffff0000 /* mask to save status bits */ -#define PCI_ANY_ID (~0) - -/* - * PCI memory base for Ethernet device as well as device Interrupt. - */ -#define BCM570X_MBAR 0x80100000 -#define BCM570X_ILINE 1 - -#define SECOND_USEC 1000000 -#define MAX_PACKET_SIZE 1600 -#define MAX_UNITS 4 - -/* Globals to this module */ -int initialized = 0; -unsigned int ioBase = 0; -volatile PLM_DEVICE_BLOCK pDevice = NULL; /* 570x softc */ -volatile PUM_DEVICE_BLOCK pUmDevice = NULL; - -/* Used to pass the full-duplex flag, etc. */ -int line_speed[MAX_UNITS] = { 0, 0, 0, 0 }; -static int full_duplex[MAX_UNITS] = { 1, 1, 1, 1 }; -static int rx_flow_control[MAX_UNITS] = { 0, 0, 0, 0 }; -static int tx_flow_control[MAX_UNITS] = { 0, 0, 0, 0 }; -static int auto_flow_control[MAX_UNITS] = { 0, 0, 0, 0 }; -static int tx_checksum[MAX_UNITS] = { 1, 1, 1, 1 }; -static int rx_checksum[MAX_UNITS] = { 1, 1, 1, 1 }; -static int auto_speed[MAX_UNITS] = { 1, 1, 1, 1 }; - -#if JUMBO_FRAMES -/* Jumbo MTU for interfaces. */ -static int mtu[MAX_UNITS] = { 0, 0, 0, 0 }; -#endif - -/* Turn on Wake-on lan for a device unit */ -static int enable_wol[MAX_UNITS] = { 0, 0, 0, 0 }; - -#define TX_DESC_CNT DEFAULT_TX_PACKET_DESC_COUNT -static unsigned int tx_pkt_desc_cnt[MAX_UNITS] = - { TX_DESC_CNT, TX_DESC_CNT, TX_DESC_CNT, TX_DESC_CNT }; - -#define RX_DESC_CNT DEFAULT_STD_RCV_DESC_COUNT -static unsigned int rx_std_desc_cnt[MAX_UNITS] = - { RX_DESC_CNT, RX_DESC_CNT, RX_DESC_CNT, RX_DESC_CNT }; - -static unsigned int rx_adaptive_coalesce[MAX_UNITS] = { 1, 1, 1, 1 }; - -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT -#define JBO_DESC_CNT DEFAULT_JUMBO_RCV_DESC_COUNT -static unsigned int rx_jumbo_desc_cnt[MAX_UNITS] = - { JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT }; -#endif -#define RX_COAL_TK DEFAULT_RX_COALESCING_TICKS -static unsigned int rx_coalesce_ticks[MAX_UNITS] = - { RX_COAL_TK, RX_COAL_TK, RX_COAL_TK, RX_COAL_TK }; - -#define RX_COAL_FM DEFAULT_RX_MAX_COALESCED_FRAMES -static unsigned int rx_max_coalesce_frames[MAX_UNITS] = - { RX_COAL_FM, RX_COAL_FM, RX_COAL_FM, RX_COAL_FM }; - -#define TX_COAL_TK DEFAULT_TX_COALESCING_TICKS -static unsigned int tx_coalesce_ticks[MAX_UNITS] = - { TX_COAL_TK, TX_COAL_TK, TX_COAL_TK, TX_COAL_TK }; - -#define TX_COAL_FM DEFAULT_TX_MAX_COALESCED_FRAMES -static unsigned int tx_max_coalesce_frames[MAX_UNITS] = - { TX_COAL_FM, TX_COAL_FM, TX_COAL_FM, TX_COAL_FM }; - -#define ST_COAL_TK DEFAULT_STATS_COALESCING_TICKS -static unsigned int stats_coalesce_ticks[MAX_UNITS] = - { ST_COAL_TK, ST_COAL_TK, ST_COAL_TK, ST_COAL_TK }; - -/* - * Legitimate values for BCM570x device types - */ -typedef enum { - BCM5700VIGIL = 0, - BCM5700A6, - BCM5700T6, - BCM5700A9, - BCM5700T9, - BCM5700, - BCM5701A5, - BCM5701T1, - BCM5701T8, - BCM5701A7, - BCM5701A10, - BCM5701A12, - BCM5701, - BCM5702, - BCM5703, - BCM5703A31, - TC996T, - TC996ST, - TC996SSX, - TC996SX, - TC996BT, - TC997T, - TC997SX, - TC1000T, - TC940BR01, - TC942BR01, - NC6770, - NC7760, - NC7770, - NC7780 -} board_t; - -/* Chip-Rev names for each device-type */ -static struct { - char *name; -} chip_rev[] = { - { - "BCM5700VIGIL"}, { - "BCM5700A6"}, { - "BCM5700T6"}, { - "BCM5700A9"}, { - "BCM5700T9"}, { - "BCM5700"}, { - "BCM5701A5"}, { - "BCM5701T1"}, { - "BCM5701T8"}, { - "BCM5701A7"}, { - "BCM5701A10"}, { - "BCM5701A12"}, { - "BCM5701"}, { - "BCM5702"}, { - "BCM5703"}, { - "BCM5703A31"}, { - "TC996T"}, { - "TC996ST"}, { - "TC996SSX"}, { - "TC996SX"}, { - "TC996BT"}, { - "TC997T"}, { - "TC997SX"}, { - "TC1000T"}, { - "TC940BR01"}, { - "TC942BR01"}, { - "NC6770"}, { - "NC7760"}, { - "NC7770"}, { - "NC7780"}, { - 0} -}; - -/* indexed by board_t, above */ -static struct { - char *name; -} board_info[] = { - { - "Broadcom Vigil B5700 1000Base-T"}, { - "Broadcom BCM5700 1000Base-T"}, { - "Broadcom BCM5700 1000Base-SX"}, { - "Broadcom BCM5700 1000Base-SX"}, { - "Broadcom BCM5700 1000Base-T"}, { - "Broadcom BCM5700"}, { - "Broadcom BCM5701 1000Base-T"}, { - "Broadcom BCM5701 1000Base-T"}, { - "Broadcom BCM5701 1000Base-T"}, { - "Broadcom BCM5701 1000Base-SX"}, { - "Broadcom BCM5701 1000Base-T"}, { - "Broadcom BCM5701 1000Base-T"}, { - "Broadcom BCM5701"}, { - "Broadcom BCM5702 1000Base-T"}, { - "Broadcom BCM5703 1000Base-T"}, { - "Broadcom BCM5703 1000Base-SX"}, { - "3Com 3C996 10/100/1000 Server NIC"}, { - "3Com 3C996 10/100/1000 Server NIC"}, { - "3Com 3C996 Gigabit Fiber-SX Server NIC"}, { - "3Com 3C996 Gigabit Fiber-SX Server NIC"}, { - "3Com 3C996B Gigabit Server NIC"}, { - "3Com 3C997 Gigabit Server NIC"}, { - "3Com 3C997 Gigabit Fiber-SX Server NIC"}, { - "3Com 3C1000 Gigabit NIC"}, { - "3Com 3C940 Gigabit LOM (21X21)"}, { - "3Com 3C942 Gigabit LOM (31X31)"}, { - "Compaq NC6770 Gigabit Server Adapter"}, { - "Compaq NC7760 Gigabit Server Adapter"}, { - "Compaq NC7770 Gigabit Server Adapter"}, { - "Compaq NC7780 Gigabit Server Adapter"}, { -0},}; - -/* PCI Devices which use the 570x chipset */ -struct pci_device_table { - unsigned short vendor_id, device_id; /* Vendor/DeviceID */ - unsigned short subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ - unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ - unsigned long board_id; /* Data private to the driver */ - int io_size, min_latency; -} bcm570xDevices[] = { - { - 0x14e4, 0x1644, 0x1014, 0x0277, 0, 0, BCM5700VIGIL, 128, 32}, { - 0x14e4, 0x1644, 0x14e4, 0x1644, 0, 0, BCM5700A6, 128, 32}, { - 0x14e4, 0x1644, 0x14e4, 0x2, 0, 0, BCM5700T6, 128, 32}, { - 0x14e4, 0x1644, 0x14e4, 0x3, 0, 0, BCM5700A9, 128, 32}, { - 0x14e4, 0x1644, 0x14e4, 0x4, 0, 0, BCM5700T9, 128, 32}, { - 0x14e4, 0x1644, 0x1028, 0xd1, 0, 0, BCM5700, 128, 32}, { - 0x14e4, 0x1644, 0x1028, 0x0106, 0, 0, BCM5700, 128, 32}, { - 0x14e4, 0x1644, 0x1028, 0x0109, 0, 0, BCM5700, 128, 32}, { - 0x14e4, 0x1644, 0x1028, 0x010a, 0, 0, BCM5700, 128, 32}, { - 0x14e4, 0x1644, 0x10b7, 0x1000, 0, 0, TC996T, 128, 32}, { - 0x14e4, 0x1644, 0x10b7, 0x1001, 0, 0, TC996ST, 128, 32}, { - 0x14e4, 0x1644, 0x10b7, 0x1002, 0, 0, TC996SSX, 128, 32}, { - 0x14e4, 0x1644, 0x10b7, 0x1003, 0, 0, TC997T, 128, 32}, { - 0x14e4, 0x1644, 0x10b7, 0x1005, 0, 0, TC997SX, 128, 32}, { - 0x14e4, 0x1644, 0x10b7, 0x1008, 0, 0, TC942BR01, 128, 32}, { - 0x14e4, 0x1644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5700, 128, 32}, { - 0x14e4, 0x1645, 0x14e4, 1, 0, 0, BCM5701A5, 128, 32}, { - 0x14e4, 0x1645, 0x14e4, 5, 0, 0, BCM5701T1, 128, 32}, { - 0x14e4, 0x1645, 0x14e4, 6, 0, 0, BCM5701T8, 128, 32}, { - 0x14e4, 0x1645, 0x14e4, 7, 0, 0, BCM5701A7, 128, 32}, { - 0x14e4, 0x1645, 0x14e4, 8, 0, 0, BCM5701A10, 128, 32}, { - 0x14e4, 0x1645, 0x14e4, 0x8008, 0, 0, BCM5701A12, 128, 32}, { - 0x14e4, 0x1645, 0x0e11, 0xc1, 0, 0, NC6770, 128, 32}, { - 0x14e4, 0x1645, 0x0e11, 0x7c, 0, 0, NC7770, 128, 32}, { - 0x14e4, 0x1645, 0x0e11, 0x85, 0, 0, NC7780, 128, 32}, { - 0x14e4, 0x1645, 0x1028, 0x0121, 0, 0, BCM5701, 128, 32}, { - 0x14e4, 0x1645, 0x10b7, 0x1004, 0, 0, TC996SX, 128, 32}, { - 0x14e4, 0x1645, 0x10b7, 0x1006, 0, 0, TC996BT, 128, 32}, { - 0x14e4, 0x1645, 0x10b7, 0x1007, 0, 0, TC1000T, 128, 32}, { - 0x14e4, 0x1645, 0x10b7, 0x1008, 0, 0, TC940BR01, 128, 32}, { - 0x14e4, 0x1645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5701, 128, 32}, { - 0x14e4, 0x1646, 0x14e4, 0x8009, 0, 0, BCM5702, 128, 32}, { - 0x14e4, 0x1646, 0x0e11, 0xbb, 0, 0, NC7760, 128, 32}, { - 0x14e4, 0x1646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702, 128, 32}, { - 0x14e4, 0x16a6, 0x14e4, 0x8009, 0, 0, BCM5702, 128, 32}, { - 0x14e4, 0x16a6, 0x0e11, 0xbb, 0, 0, NC7760, 128, 32}, { - 0x14e4, 0x16a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702, 128, 32}, { - 0x14e4, 0x1647, 0x14e4, 0x0009, 0, 0, BCM5703, 128, 32}, { - 0x14e4, 0x1647, 0x14e4, 0x000a, 0, 0, BCM5703A31, 128, 32}, { - 0x14e4, 0x1647, 0x14e4, 0x000b, 0, 0, BCM5703, 128, 32}, { - 0x14e4, 0x1647, 0x14e4, 0x800a, 0, 0, BCM5703, 128, 32}, { - 0x14e4, 0x1647, 0x0e11, 0x9a, 0, 0, NC7770, 128, 32}, { - 0x14e4, 0x1647, 0x0e11, 0x99, 0, 0, NC7780, 128, 32}, { - 0x14e4, 0x1647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703, 128, 32}, { - 0x14e4, 0x16a7, 0x14e4, 0x0009, 0, 0, BCM5703, 128, 32}, { - 0x14e4, 0x16a7, 0x14e4, 0x000a, 0, 0, BCM5703A31, 128, 32}, { - 0x14e4, 0x16a7, 0x14e4, 0x000b, 0, 0, BCM5703, 128, 32}, { - 0x14e4, 0x16a7, 0x14e4, 0x800a, 0, 0, BCM5703, 128, 32}, { - 0x14e4, 0x16a7, 0x0e11, 0x9a, 0, 0, NC7770, 128, 32}, { - 0x14e4, 0x16a7, 0x0e11, 0x99, 0, 0, NC7780, 128, 32}, { - 0x14e4, 0x16a7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703, 128, 32} -}; - -#define n570xDevices (sizeof(bcm570xDevices)/sizeof(bcm570xDevices[0])) - -/* - * Allocate a packet buffer from the bcm570x packet pool. - */ -void *bcm570xPktAlloc (int u, int pksize) -{ - return malloc (pksize); -} - -/* - * Free a packet previously allocated from the bcm570x packet - * buffer pool. - */ -void bcm570xPktFree (int u, void *p) -{ - free (p); -} - -int bcm570xReplenishRxBuffers (PUM_DEVICE_BLOCK pUmDevice) -{ - PLM_PACKET pPacket; - PUM_PACKET pUmPacket; - void *skb; - int queue_rx = 0; - int ret = 0; - - while ((pUmPacket = (PUM_PACKET) - QQ_PopHead (&pUmDevice->rx_out_of_buf_q.Container)) != 0) { - - pPacket = (PLM_PACKET) pUmPacket; - - /* reuse an old skb */ - if (pUmPacket->skbuff) { - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, - pPacket); - queue_rx = 1; - continue; - } - if ((skb = bcm570xPktAlloc (pUmDevice->index, - pPacket->u.Rx.RxBufferSize + 2)) == - 0) { - QQ_PushHead (&pUmDevice->rx_out_of_buf_q.Container, - pPacket); - printf ("NOTICE: Out of RX memory.\n"); - ret = 1; - break; - } - - pUmPacket->skbuff = skb; - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket); - queue_rx = 1; - } - - if (queue_rx) { - LM_QueueRxPackets (pDevice); - } - - return ret; -} - -/* - * Probe, Map, and Init 570x device. - */ -int eth_init (bd_t * bis) -{ - int i, rv, devFound = FALSE; - pci_dev_t devbusfn; - unsigned short status; - - /* Find PCI device, if it exists, configure ... */ - for (i = 0; i < n570xDevices; i++) { - devbusfn = pci_find_device (bcm570xDevices[i].vendor_id, - bcm570xDevices[i].device_id, 0); - if (devbusfn == -1) { - continue; /* No device of that vendor/device ID */ - } else { - - /* Set ILINE */ - pci_write_config_byte (devbusfn, - PCI_INTERRUPT_LINE, - BCM570X_ILINE); - - /* - * 0x10 - 0x14 define one 64-bit MBAR. - * 0x14 is the higher-order address bits of the BAR. - */ - pci_write_config_dword (devbusfn, - PCI_BASE_ADDRESS_1, 0); - - ioBase = BCM570X_MBAR; - - pci_write_config_dword (devbusfn, - PCI_BASE_ADDRESS_0, ioBase); - - /* - * Enable PCI memory, IO, and Master -- don't - * reset any status bits in doing so. - */ - pci_read_config_word (devbusfn, PCI_COMMAND, &status); - - status |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - - pci_write_config_word (devbusfn, PCI_COMMAND, status); - - printf - ("\n%s: bus %d, device %d, function %d: MBAR=0x%x\n", - board_info[bcm570xDevices[i].board_id].name, - PCI_BUS (devbusfn), PCI_DEV (devbusfn), - PCI_FUNC (devbusfn), ioBase); - - /* Allocate once, but always clear on init */ - if (!pDevice) { - pDevice = malloc (sizeof (UM_DEVICE_BLOCK)); - pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - memset (pDevice, 0x0, sizeof (UM_DEVICE_BLOCK)); - } - - /* Configure pci dev structure */ - pUmDevice->pdev = devbusfn; - pUmDevice->index = 0; - pUmDevice->tx_pkt = 0; - pUmDevice->rx_pkt = 0; - devFound = TRUE; - break; - } - } - - if (!devFound) { - printf - ("eth_init: FAILURE: no BCM570x Ethernet devices found.\n"); - return -1; - } - - /* Setup defaults for chip */ - pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE; - - if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) { - pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE; - } else { - - if (rx_checksum[i]) { - pDevice->TaskToOffload |= - LM_TASK_OFFLOAD_RX_TCP_CHECKSUM | - LM_TASK_OFFLOAD_RX_UDP_CHECKSUM; - } - - if (tx_checksum[i]) { - pDevice->TaskToOffload |= - LM_TASK_OFFLOAD_TX_TCP_CHECKSUM | - LM_TASK_OFFLOAD_TX_UDP_CHECKSUM; - pDevice->NoTxPseudoHdrChksum = TRUE; - } - } - - /* Set Device PCI Memory base address */ - pDevice->pMappedMemBase = (PLM_UINT8) ioBase; - - /* Pull down adapter info */ - if ((rv = LM_GetAdapterInfo (pDevice)) != LM_STATUS_SUCCESS) { - printf ("bcm570xEnd: LM_GetAdapterInfo failed: rv=%d!\n", rv); - return -2; - } - - /* Lock not needed */ - pUmDevice->do_global_lock = 0; - - if (T3_ASIC_REV (pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5700) { - /* The 5700 chip works best without interleaved register */ - /* accesses on certain machines. */ - pUmDevice->do_global_lock = 1; - } - - /* Setup timer delays */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - pDevice->UseTaggedStatus = TRUE; - pUmDevice->timer_interval = CONFIG_SYS_HZ; - } else { - pUmDevice->timer_interval = CONFIG_SYS_HZ / 50; - } - - /* Grab name .... */ - pUmDevice->name = - (char *)malloc (strlen (board_info[bcm570xDevices[i].board_id].name) - + 1); - strcpy (pUmDevice->name, board_info[bcm570xDevices[i].board_id].name); - - eth_getenv_enetaddr("ethaddr", pDevice->NodeAddress); - LM_SetMacAddress (pDevice); - /* Init queues .. */ - QQ_InitQueue (&pUmDevice->rx_out_of_buf_q.Container, - MAX_RX_PACKET_DESC_COUNT); - pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0; - - /* delay for 4 seconds */ - pUmDevice->delayed_link_ind = (4 * CONFIG_SYS_HZ) / pUmDevice->timer_interval; - - pUmDevice->adaptive_expiry = CONFIG_SYS_HZ / pUmDevice->timer_interval; - - /* Sometimes we get spurious ints. after reset when link is down. */ - /* This field tells the isr to service the int. even if there is */ - /* no status block update. */ - pUmDevice->adapter_just_inited = - (3 * CONFIG_SYS_HZ) / pUmDevice->timer_interval; - - /* Initialize 570x */ - if (LM_InitializeAdapter (pDevice) != LM_STATUS_SUCCESS) { - printf ("ERROR: Adapter initialization failed.\n"); - return ERROR; - } - - /* Enable chip ISR */ - LM_EnableInterrupt (pDevice); - - /* Clear MC table */ - LM_MulticastClear (pDevice); - - /* Enable Multicast */ - LM_SetReceiveMask (pDevice, - pDevice->ReceiveMask | LM_ACCEPT_ALL_MULTICAST); - - pUmDevice->opened = 1; - pUmDevice->tx_full = 0; - pUmDevice->tx_pkt = 0; - pUmDevice->rx_pkt = 0; - printf ("eth%d: %s @0x%lx,", - pDevice->index, pUmDevice->name, (unsigned long)ioBase); - printf ("node addr "); - for (i = 0; i < 6; i++) { - printf ("%2.2x", pDevice->NodeAddress[i]); - } - printf ("\n"); - - printf ("eth%d: ", pDevice->index); - printf ("%s with ", chip_rev[bcm570xDevices[i].board_id].name); - - if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5400_PHY_ID) - printf ("Broadcom BCM5400 Copper "); - else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) - printf ("Broadcom BCM5401 Copper "); - else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5411_PHY_ID) - printf ("Broadcom BCM5411 Copper "); - else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5701_PHY_ID) - printf ("Broadcom BCM5701 Integrated Copper "); - else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5703_PHY_ID) - printf ("Broadcom BCM5703 Integrated Copper "); - else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM8002_PHY_ID) - printf ("Broadcom BCM8002 SerDes "); - else if (pDevice->EnableTbi) - printf ("Agilent HDMP-1636 SerDes "); - else - printf ("Unknown "); - printf ("transceiver found\n"); - - printf ("eth%d: %s, MTU: %d,", - pDevice->index, pDevice->BusSpeedStr, 1500); - - if ((pDevice->ChipRevId != T3_CHIP_ID_5700_B0) && rx_checksum[i]) - printf ("Rx Checksum ON\n"); - else - printf ("Rx Checksum OFF\n"); - initialized++; - - return 0; -} - -/* Ethernet Interrupt service routine */ -void eth_isr (void) -{ - LM_UINT32 oldtag, newtag; - int i; - - pUmDevice->interrupt = 1; - - if (pDevice->UseTaggedStatus) { - if ((pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) || - pUmDevice->adapter_just_inited) { - MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 1); - oldtag = pDevice->pStatusBlkVirt->StatusTag; - - for (i = 0;; i++) { - pDevice->pStatusBlkVirt->Status &= - ~STATUS_BLOCK_UPDATED; - LM_ServiceInterrupts (pDevice); - newtag = pDevice->pStatusBlkVirt->StatusTag; - if ((newtag == oldtag) || (i > 50)) { - MB_REG_WR (pDevice, - Mailbox.Interrupt[0].Low, - newtag << 24); - if (pDevice->UndiFix) { - REG_WR (pDevice, Grc.LocalCtrl, - pDevice-> - GrcLocalCtrl | 0x2); - } - break; - } - oldtag = newtag; - } - } - } else { - while (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) { - unsigned int dummy; - - pDevice->pMemView->Mailbox.Interrupt[0].Low = 1; - pDevice->pStatusBlkVirt->Status &= - ~STATUS_BLOCK_UPDATED; - LM_ServiceInterrupts (pDevice); - pDevice->pMemView->Mailbox.Interrupt[0].Low = 0; - dummy = pDevice->pMemView->Mailbox.Interrupt[0].Low; - } - } - - /* Allocate new RX buffers */ - if (QQ_GetEntryCnt (&pUmDevice->rx_out_of_buf_q.Container)) { - bcm570xReplenishRxBuffers (pUmDevice); - } - - /* Queue packets */ - if (QQ_GetEntryCnt (&pDevice->RxPacketFreeQ.Container)) { - LM_QueueRxPackets (pDevice); - } - - if (pUmDevice->tx_queued) { - pUmDevice->tx_queued = 0; - } - - if (pUmDevice->tx_full) { - if (pDevice->LinkStatus != LM_STATUS_LINK_DOWN) { - printf - ("NOTICE: tx was previously blocked, restarting MUX\n"); - pUmDevice->tx_full = 0; - } - } - - pUmDevice->interrupt = 0; - -} - -int eth_send (volatile void *packet, int length) -{ - int status = 0; -#if ET_DEBUG - unsigned char *ptr = (unsigned char *)packet; -#endif - PLM_PACKET pPacket; - PUM_PACKET pUmPacket; - - /* Link down, return */ - while (pDevice->LinkStatus == LM_STATUS_LINK_DOWN) { -#if 0 - printf ("eth%d: link down - check cable or link partner.\n", - pUmDevice->index); -#endif - eth_isr (); - - /* Wait to see link for one-half a second before sending ... */ - udelay (1500000); - - } - - /* Clear sent flag */ - pUmDevice->tx_pkt = 0; - - /* Previously blocked */ - if (pUmDevice->tx_full) { - printf ("eth%d: tx blocked.\n", pUmDevice->index); - return 0; - } - - pPacket = (PLM_PACKET) - QQ_PopHead (&pDevice->TxPacketFreeQ.Container); - - if (pPacket == 0) { - pUmDevice->tx_full = 1; - printf ("bcm570xEndSend: TX full!\n"); - return 0; - } - - if (pDevice->SendBdLeft.counter == 0) { - pUmDevice->tx_full = 1; - printf ("bcm570xEndSend: no more TX descriptors!\n"); - QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket); - return 0; - } - - if (length <= 0) { - printf ("eth: bad packet size: %d\n", length); - goto out; - } - - /* Get packet buffers and fragment list */ - pUmPacket = (PUM_PACKET) pPacket; - /* Single DMA Descriptor transmit. - * Fragments may be provided, but one DMA descriptor max is - * used to send the packet. - */ - if (MM_CoalesceTxBuffer (pDevice, pPacket) != LM_STATUS_SUCCESS) { - if (pUmPacket->skbuff == NULL) { - /* Packet was discarded */ - printf ("TX: failed (1)\n"); - status = 1; - } else { - printf ("TX: failed (2)\n"); - status = 2; - } - QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket); - return status; - } - - /* Copy packet to DMA buffer */ - memset (pUmPacket->skbuff, 0x0, MAX_PACKET_SIZE); - memcpy ((void *)pUmPacket->skbuff, (void *)packet, length); - pPacket->PacketSize = length; - pPacket->Flags |= SND_BD_FLAG_END | SND_BD_FLAG_COAL_NOW; - pPacket->u.Tx.FragCount = 1; - /* We've already provided a frame ready for transmission */ - pPacket->Flags &= ~SND_BD_FLAG_TCP_UDP_CKSUM; - - if (LM_SendPacket (pDevice, pPacket) == LM_STATUS_FAILURE) { - /* - * A lower level send failure will push the packet descriptor back - * in the free queue, so just deal with the VxWorks clusters. - */ - if (pUmPacket->skbuff == NULL) { - printf ("TX failed (1)!\n"); - /* Packet was discarded */ - status = 3; - } else { - /* A resource problem ... */ - printf ("TX failed (2)!\n"); - status = 4; - } - - if (QQ_GetEntryCnt (&pDevice->TxPacketFreeQ.Container) == 0) { - printf ("TX: emptyQ!\n"); - pUmDevice->tx_full = 1; - } - } - - while (pUmDevice->tx_pkt == 0) { - /* Service TX */ - eth_isr (); - } -#if ET_DEBUG - printf ("eth_send: 0x%x, %d bytes\n" - "[%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x] ...\n", - (int)pPacket, length, - ptr[0], ptr[1], ptr[2], ptr[3], ptr[4], ptr[5], - ptr[6], ptr[7], ptr[8], ptr[9], ptr[10], ptr[11], ptr[12], - ptr[13], ptr[14], ptr[15]); -#endif - pUmDevice->tx_pkt = 0; - QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket); - - /* Done with send */ - out: - return status; -} - -/* Ethernet receive */ -int eth_rx (void) -{ - PLM_PACKET pPacket = NULL; - PUM_PACKET pUmPacket = NULL; - void *skb; - int size = 0; - - while (TRUE) { - - bcm570x_service_isr: - /* Pull down packet if it is there */ - eth_isr (); - - /* Indicate RX packets called */ - if (pUmDevice->rx_pkt) { - /* printf("eth_rx: got a packet...\n"); */ - pUmDevice->rx_pkt = 0; - } else { - /* printf("eth_rx: waiting for packet...\n"); */ - goto bcm570x_service_isr; - } - - pPacket = (PLM_PACKET) - QQ_PopHead (&pDevice->RxPacketReceivedQ.Container); - - if (pPacket == 0) { - printf ("eth_rx: empty packet!\n"); - goto bcm570x_service_isr; - } - - pUmPacket = (PUM_PACKET) pPacket; -#if ET_DEBUG - printf ("eth_rx: packet @0x%x\n", (int)pPacket); -#endif - /* If the packet generated an error, reuse buffer */ - if ((pPacket->PacketStatus != LM_STATUS_SUCCESS) || - ((size = pPacket->PacketSize) > pDevice->RxMtu)) { - - /* reuse skb */ - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, - pPacket); - printf ("eth_rx: error in packet dma!\n"); - goto bcm570x_service_isr; - } - - /* Set size and address */ - skb = pUmPacket->skbuff; - size = pPacket->PacketSize; - - /* Pass the packet up to the protocol - * layers. - */ - NetReceive (skb, size); - - /* Free packet buffer */ - bcm570xPktFree (pUmDevice->index, skb); - pUmPacket->skbuff = NULL; - - /* Reuse SKB */ - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket); - - return 0; /* Got a packet, bail ... */ - } - return size; -} - -/* Shut down device */ -void eth_halt (void) -{ - int i; - if (initialized) - if (pDevice && pUmDevice && pUmDevice->opened) { - printf ("\neth%d:%s,", pUmDevice->index, - pUmDevice->name); - printf ("HALT,"); - /* stop device */ - LM_Halt (pDevice); - printf ("POWER DOWN,"); - LM_SetPowerState (pDevice, LM_POWER_STATE_D3); - - /* Free the memory allocated by the device in tigon3 */ - for (i = 0; i < pUmDevice->mem_list_num; i++) { - if (pUmDevice->mem_list[i]) { - /* sanity check */ - if (pUmDevice->dma_list[i]) { /* cache-safe memory */ - free (pUmDevice->mem_list[i]); - } else { - free (pUmDevice->mem_list[i]); /* normal memory */ - } - } - } - pUmDevice->opened = 0; - free (pDevice); - pDevice = NULL; - pUmDevice = NULL; - initialized = 0; - printf ("done - offline.\n"); - } -} - -/* - * - * Middle Module: Interface between the HW driver (tigon3 modules) and - * the native (SENS) driver. These routines implement the system - * interface for tigon3 on VxWorks. - */ - -/* Middle module dependency - size of a packet descriptor */ -int MM_Packet_Desc_Size = sizeof (UM_PACKET); - -LM_STATUS -MM_ReadConfig32 (PLM_DEVICE_BLOCK pDevice, - LM_UINT32 Offset, LM_UINT32 * pValue32) -{ - UM_DEVICE_BLOCK *pUmDevice; - pUmDevice = (UM_DEVICE_BLOCK *) pDevice; - pci_read_config_dword (pUmDevice->pdev, Offset, (u32 *) pValue32); - return LM_STATUS_SUCCESS; -} - -LM_STATUS -MM_WriteConfig32 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT32 Value32) -{ - UM_DEVICE_BLOCK *pUmDevice; - pUmDevice = (UM_DEVICE_BLOCK *) pDevice; - pci_write_config_dword (pUmDevice->pdev, Offset, Value32); - return LM_STATUS_SUCCESS; -} - -LM_STATUS -MM_ReadConfig16 (PLM_DEVICE_BLOCK pDevice, - LM_UINT32 Offset, LM_UINT16 * pValue16) -{ - UM_DEVICE_BLOCK *pUmDevice; - pUmDevice = (UM_DEVICE_BLOCK *) pDevice; - pci_read_config_word (pUmDevice->pdev, Offset, (u16 *) pValue16); - return LM_STATUS_SUCCESS; -} - -LM_STATUS -MM_WriteConfig16 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT16 Value16) -{ - UM_DEVICE_BLOCK *pUmDevice; - pUmDevice = (UM_DEVICE_BLOCK *) pDevice; - pci_write_config_word (pUmDevice->pdev, Offset, Value16); - return LM_STATUS_SUCCESS; -} - -LM_STATUS -MM_AllocateSharedMemory (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize, - PLM_VOID * pMemoryBlockVirt, - PLM_PHYSICAL_ADDRESS pMemoryBlockPhy, LM_BOOL Cached) -{ - PLM_VOID pvirt; - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - dma_addr_t mapping; - - pvirt = malloc (BlockSize); - mapping = (dma_addr_t) (pvirt); - if (!pvirt) - return LM_STATUS_FAILURE; - - pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt; - pUmDevice->dma_list[pUmDevice->mem_list_num] = mapping; - pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize; - memset (pvirt, 0, BlockSize); - - *pMemoryBlockVirt = (PLM_VOID) pvirt; - MM_SetAddr (pMemoryBlockPhy, (dma_addr_t) mapping); - - return LM_STATUS_SUCCESS; -} - -LM_STATUS -MM_AllocateMemory (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize, - PLM_VOID * pMemoryBlockVirt) -{ - PLM_VOID pvirt; - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - - pvirt = malloc (BlockSize); - - if (!pvirt) - return LM_STATUS_FAILURE; - - pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt; - pUmDevice->dma_list[pUmDevice->mem_list_num] = 0; - pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize; - memset (pvirt, 0, BlockSize); - *pMemoryBlockVirt = pvirt; - - return LM_STATUS_SUCCESS; -} - -LM_STATUS MM_MapMemBase (PLM_DEVICE_BLOCK pDevice) -{ - printf ("BCM570x PCI Memory base address @0x%x\n", - (unsigned int)pDevice->pMappedMemBase); - return LM_STATUS_SUCCESS; -} - -LM_STATUS MM_InitializeUmPackets (PLM_DEVICE_BLOCK pDevice) -{ - int i; - void *skb; - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - PUM_PACKET pUmPacket = NULL; - PLM_PACKET pPacket = NULL; - - for (i = 0; i < pDevice->RxPacketDescCnt; i++) { - pPacket = QQ_PopHead (&pDevice->RxPacketFreeQ.Container); - pUmPacket = (PUM_PACKET) pPacket; - - if (pPacket == 0) { - printf ("MM_InitializeUmPackets: Bad RxPacketFreeQ\n"); - } - - skb = bcm570xPktAlloc (pUmDevice->index, - pPacket->u.Rx.RxBufferSize + 2); - - if (skb == 0) { - pUmPacket->skbuff = 0; - QQ_PushTail (&pUmDevice->rx_out_of_buf_q.Container, - pPacket); - printf ("MM_InitializeUmPackets: out of buffer.\n"); - continue; - } - - pUmPacket->skbuff = skb; - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket); - } - - pUmDevice->rx_low_buf_thresh = pDevice->RxPacketDescCnt / 8; - - return LM_STATUS_SUCCESS; -} - -LM_STATUS MM_GetConfig (PLM_DEVICE_BLOCK pDevice) -{ - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - int index = pDevice->index; - - if (auto_speed[index] == 0) - pDevice->DisableAutoNeg = TRUE; - else - pDevice->DisableAutoNeg = FALSE; - - if (line_speed[index] == 0) { - pDevice->RequestedMediaType = LM_REQUESTED_MEDIA_TYPE_AUTO; - pDevice->DisableAutoNeg = FALSE; - } else { - if (line_speed[index] == 1000) { - if (pDevice->EnableTbi) { - pDevice->RequestedMediaType = - LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX; - } else if (full_duplex[index]) { - pDevice->RequestedMediaType = - LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX; - } else { - pDevice->RequestedMediaType = - LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS; - } - if (!pDevice->EnableTbi) - pDevice->DisableAutoNeg = FALSE; - } else if (line_speed[index] == 100) { - if (full_duplex[index]) { - pDevice->RequestedMediaType = - LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX; - } else { - pDevice->RequestedMediaType = - LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS; - } - } else if (line_speed[index] == 10) { - if (full_duplex[index]) { - pDevice->RequestedMediaType = - LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX; - } else { - pDevice->RequestedMediaType = - LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS; - } - } else { - pDevice->RequestedMediaType = - LM_REQUESTED_MEDIA_TYPE_AUTO; - pDevice->DisableAutoNeg = FALSE; - } - - } - pDevice->FlowControlCap = 0; - if (rx_flow_control[index] != 0) { - pDevice->FlowControlCap |= LM_FLOW_CONTROL_RECEIVE_PAUSE; - } - if (tx_flow_control[index] != 0) { - pDevice->FlowControlCap |= LM_FLOW_CONTROL_TRANSMIT_PAUSE; - } - if ((auto_flow_control[index] != 0) && - (pDevice->DisableAutoNeg == FALSE)) { - - pDevice->FlowControlCap |= LM_FLOW_CONTROL_AUTO_PAUSE; - if ((tx_flow_control[index] == 0) && - (rx_flow_control[index] == 0)) { - pDevice->FlowControlCap |= - LM_FLOW_CONTROL_TRANSMIT_PAUSE | - LM_FLOW_CONTROL_RECEIVE_PAUSE; - } - } - - /* Default MTU for now */ - pUmDevice->mtu = 1500; - -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - if (pUmDevice->mtu > 1500) { - pDevice->RxMtu = pUmDevice->mtu; - pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT; - } else { - pDevice->RxJumboDescCnt = 0; - } - pDevice->RxJumboDescCnt = rx_jumbo_desc_cnt[index]; -#else - pDevice->RxMtu = pUmDevice->mtu; -#endif - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - pDevice->UseTaggedStatus = TRUE; - pUmDevice->timer_interval = CONFIG_SYS_HZ; - } else { - pUmDevice->timer_interval = CONFIG_SYS_HZ / 50; - } - - pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index]; - pDevice->RxStdDescCnt = rx_std_desc_cnt[index]; - /* Note: adaptive coalescence really isn't adaptive in this driver */ - pUmDevice->rx_adaptive_coalesce = rx_adaptive_coalesce[index]; - if (!pUmDevice->rx_adaptive_coalesce) { - pDevice->RxCoalescingTicks = rx_coalesce_ticks[index]; - if (pDevice->RxCoalescingTicks > MAX_RX_COALESCING_TICKS) - pDevice->RxCoalescingTicks = MAX_RX_COALESCING_TICKS; - pUmDevice->rx_curr_coalesce_ticks = pDevice->RxCoalescingTicks; - - pDevice->RxMaxCoalescedFrames = rx_max_coalesce_frames[index]; - if (pDevice->RxMaxCoalescedFrames > MAX_RX_MAX_COALESCED_FRAMES) - pDevice->RxMaxCoalescedFrames = - MAX_RX_MAX_COALESCED_FRAMES; - pUmDevice->rx_curr_coalesce_frames = - pDevice->RxMaxCoalescedFrames; - pDevice->StatsCoalescingTicks = stats_coalesce_ticks[index]; - if (pDevice->StatsCoalescingTicks > MAX_STATS_COALESCING_TICKS) - pDevice->StatsCoalescingTicks = - MAX_STATS_COALESCING_TICKS; - } else { - pUmDevice->rx_curr_coalesce_frames = - DEFAULT_RX_MAX_COALESCED_FRAMES; - pUmDevice->rx_curr_coalesce_ticks = DEFAULT_RX_COALESCING_TICKS; - } - pDevice->TxCoalescingTicks = tx_coalesce_ticks[index]; - if (pDevice->TxCoalescingTicks > MAX_TX_COALESCING_TICKS) - pDevice->TxCoalescingTicks = MAX_TX_COALESCING_TICKS; - pDevice->TxMaxCoalescedFrames = tx_max_coalesce_frames[index]; - if (pDevice->TxMaxCoalescedFrames > MAX_TX_MAX_COALESCED_FRAMES) - pDevice->TxMaxCoalescedFrames = MAX_TX_MAX_COALESCED_FRAMES; - - if (enable_wol[index]) { - pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_MAGIC_PACKET; - pDevice->WakeUpMode = LM_WAKE_UP_MODE_MAGIC_PACKET; - } - pDevice->NicSendBd = TRUE; - - /* Don't update status blocks during interrupt */ - pDevice->RxCoalescingTicksDuringInt = 0; - pDevice->TxCoalescingTicksDuringInt = 0; - - return LM_STATUS_SUCCESS; - -} - -LM_STATUS MM_StartTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) -{ - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - printf ("Start TX DMA: dev=%d packet @0x%x\n", - (int)pUmDevice->index, (unsigned int)pPacket); - - return LM_STATUS_SUCCESS; -} - -LM_STATUS MM_CompleteTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) -{ - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - printf ("Complete TX DMA: dev=%d packet @0x%x\n", - (int)pUmDevice->index, (unsigned int)pPacket); - return LM_STATUS_SUCCESS; -} - -LM_STATUS MM_IndicateStatus (PLM_DEVICE_BLOCK pDevice, LM_STATUS Status) -{ - char buf[128]; - char lcd[4]; - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - LM_FLOW_CONTROL flow_control; - - pUmDevice->delayed_link_ind = 0; - memset (lcd, 0x0, 4); - - if (Status == LM_STATUS_LINK_DOWN) { - sprintf (buf, "eth%d: %s: NIC Link is down\n", - pUmDevice->index, pUmDevice->name); - lcd[0] = 'L'; - lcd[1] = 'N'; - lcd[2] = 'K'; - lcd[3] = '?'; - } else if (Status == LM_STATUS_LINK_ACTIVE) { - sprintf (buf, "eth%d:%s: ", pUmDevice->index, pUmDevice->name); - - if (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) { - strcat (buf, "1000 Mbps "); - lcd[0] = '1'; - lcd[1] = 'G'; - lcd[2] = 'B'; - } else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS) { - strcat (buf, "100 Mbps "); - lcd[0] = '1'; - lcd[1] = '0'; - lcd[2] = '0'; - } else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS) { - strcat (buf, "10 Mbps "); - lcd[0] = '1'; - lcd[1] = '0'; - lcd[2] = ' '; - } - if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL) { - strcat (buf, "full duplex"); - lcd[3] = 'F'; - } else { - strcat (buf, "half duplex"); - lcd[3] = 'H'; - } - strcat (buf, " link up"); - - flow_control = pDevice->FlowControl & - (LM_FLOW_CONTROL_RECEIVE_PAUSE | - LM_FLOW_CONTROL_TRANSMIT_PAUSE); - - if (flow_control) { - if (flow_control & LM_FLOW_CONTROL_RECEIVE_PAUSE) { - strcat (buf, ", receive "); - if (flow_control & - LM_FLOW_CONTROL_TRANSMIT_PAUSE) - strcat (buf, " & transmit "); - } else { - strcat (buf, ", transmit "); - } - strcat (buf, "flow control ON"); - } else { - strcat (buf, ", flow control OFF"); - } - strcat (buf, "\n"); - printf ("%s", buf); - } -#if 0 - sysLedDsply (lcd[0], lcd[1], lcd[2], lcd[3]); -#endif - return LM_STATUS_SUCCESS; -} - -LM_STATUS MM_FreeRxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) -{ - - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - PUM_PACKET pUmPacket; - void *skb; - - pUmPacket = (PUM_PACKET) pPacket; - - if ((skb = pUmPacket->skbuff)) - bcm570xPktFree (pUmDevice->index, skb); - - pUmPacket->skbuff = 0; - - return LM_STATUS_SUCCESS; -} - -unsigned long MM_AnGetCurrentTime_us (PAN_STATE_INFO pAnInfo) -{ - return get_timer (0); -} - -/* - * Transform an MBUF chain into a single MBUF. - * This routine will fail if the amount of data in the - * chain overflows a transmit buffer. In that case, - * the incoming MBUF chain will be freed. This routine can - * also fail by not being able to allocate a new MBUF (including - * cluster and mbuf headers). In that case the failure is - * non-fatal. The incoming cluster chain is not freed, giving - * the caller the choice of whether to try a retransmit later. - */ -LM_STATUS MM_CoalesceTxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) -{ - PUM_PACKET pUmPacket = (PUM_PACKET) pPacket; - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - void *skbnew; - int len = 0; - - if (len == 0) - return (LM_STATUS_SUCCESS); - - if (len > MAX_PACKET_SIZE) { - printf ("eth%d: xmit frame discarded, too big!, size = %d\n", - pUmDevice->index, len); - return (LM_STATUS_FAILURE); - } - - skbnew = bcm570xPktAlloc (pUmDevice->index, MAX_PACKET_SIZE); - - if (skbnew == NULL) { - pUmDevice->tx_full = 1; - printf ("eth%d: out of transmit buffers", pUmDevice->index); - return (LM_STATUS_FAILURE); - } - - /* New packet values */ - pUmPacket->skbuff = skbnew; - pUmPacket->lm_packet.u.Tx.FragCount = 1; - - return (LM_STATUS_SUCCESS); -} - -LM_STATUS MM_IndicateRxPackets (PLM_DEVICE_BLOCK pDevice) -{ - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - pUmDevice->rx_pkt = 1; - return LM_STATUS_SUCCESS; -} - -LM_STATUS MM_IndicateTxPackets (PLM_DEVICE_BLOCK pDevice) -{ - PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; - PLM_PACKET pPacket; - PUM_PACKET pUmPacket; - void *skb; - while (TRUE) { - - pPacket = (PLM_PACKET) - QQ_PopHead (&pDevice->TxPacketXmittedQ.Container); - - if (pPacket == 0) - break; - - pUmPacket = (PUM_PACKET) pPacket; - skb = (void *)pUmPacket->skbuff; - - /* - * Free MBLK if we transmitted a fragmented packet or a - * non-fragmented packet straight from the VxWorks - * buffer pool. If packet was copied to a local transmit - * buffer, then there's no MBUF to free, just free - * the transmit buffer back to the cluster pool. - */ - - if (skb) - bcm570xPktFree (pUmDevice->index, skb); - - pUmPacket->skbuff = 0; - QQ_PushTail (&pDevice->TxPacketFreeQ.Container, pPacket); - pUmDevice->tx_pkt = 1; - } - if (pUmDevice->tx_full) { - if (QQ_GetEntryCnt (&pDevice->TxPacketFreeQ.Container) >= - (QQ_GetSize (&pDevice->TxPacketFreeQ.Container) >> 1)) - pUmDevice->tx_full = 0; - } - return LM_STATUS_SUCCESS; -} - -/* - * Scan an MBUF chain until we reach fragment number "frag" - * Return its length and physical address. - */ -void MM_MapTxDma - (PLM_DEVICE_BLOCK pDevice, - struct _LM_PACKET *pPacket, - T3_64BIT_HOST_ADDR * paddr, LM_UINT32 * len, int frag) { - PUM_PACKET pUmPacket = (PUM_PACKET) pPacket; - *len = pPacket->PacketSize; - MM_SetT3Addr (paddr, (dma_addr_t) pUmPacket->skbuff); -} - -/* - * Convert an mbuf address, a CPU local virtual address, - * to a physical address as seen from a PCI device. Store the - * result at paddr. - */ -void MM_MapRxDma (PLM_DEVICE_BLOCK pDevice, - struct _LM_PACKET *pPacket, T3_64BIT_HOST_ADDR * paddr) -{ - PUM_PACKET pUmPacket = (PUM_PACKET) pPacket; - MM_SetT3Addr (paddr, (dma_addr_t) pUmPacket->skbuff); -} - -void MM_SetAddr (LM_PHYSICAL_ADDRESS * paddr, dma_addr_t addr) -{ -#if (BITS_PER_LONG == 64) - paddr->High = ((unsigned long)addr) >> 32; - paddr->Low = ((unsigned long)addr) & 0xffffffff; -#else - paddr->High = 0; - paddr->Low = (unsigned long)addr; -#endif -} - -void MM_SetT3Addr (T3_64BIT_HOST_ADDR * paddr, dma_addr_t addr) -{ - unsigned long baddr = (unsigned long)addr; -#if (BITS_PER_LONG == 64) - set_64bit_addr (paddr, baddr & 0xffffffff, baddr >> 32); -#else - set_64bit_addr (paddr, baddr, 0); -#endif -} - -/* - * This combination of `inline' and `extern' has almost the effect of a - * macro. The way to use it is to put a function definition in a header - * file with these keywords, and put another copy of the definition - * (lacking `inline' and `extern') in a library file. The definition in - * the header file will cause most calls to the function to be inlined. - * If any uses of the function remain, they will refer to the single copy - * in the library. - */ -void atomic_set (atomic_t * entry, int val) -{ - entry->counter = val; -} - -int atomic_read (atomic_t * entry) -{ - return entry->counter; -} - -void atomic_inc (atomic_t * entry) -{ - if (entry) - entry->counter++; -} - -void atomic_dec (atomic_t * entry) -{ - if (entry) - entry->counter--; -} - -void atomic_sub (int a, atomic_t * entry) -{ - if (entry) - entry->counter -= a; -} - -void atomic_add (int a, atomic_t * entry) -{ - if (entry) - entry->counter += a; -} - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -void QQ_InitQueue (PQQ_CONTAINER pQueue, unsigned int QueueSize) -{ - pQueue->Head = 0; - pQueue->Tail = 0; - pQueue->Size = QueueSize + 1; - atomic_set (&pQueue->EntryCnt, 0); -} /* QQ_InitQueue */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -char QQ_Full (PQQ_CONTAINER pQueue) -{ - unsigned int NewHead; - - NewHead = (pQueue->Head + 1) % pQueue->Size; - - return (NewHead == pQueue->Tail); -} /* QQ_Full */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -char QQ_Empty (PQQ_CONTAINER pQueue) -{ - return (pQueue->Head == pQueue->Tail); -} /* QQ_Empty */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -unsigned int QQ_GetSize (PQQ_CONTAINER pQueue) -{ - return pQueue->Size; -} /* QQ_GetSize */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -unsigned int QQ_GetEntryCnt (PQQ_CONTAINER pQueue) -{ - return atomic_read (&pQueue->EntryCnt); -} /* QQ_GetEntryCnt */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/* TRUE entry was added successfully. */ -/* FALSE queue is full. */ -/******************************************************************************/ -char QQ_PushHead (PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry) -{ - unsigned int Head; - - Head = (pQueue->Head + 1) % pQueue->Size; - -#if !defined(QQ_NO_OVERFLOW_CHECK) - if (Head == pQueue->Tail) { - return 0; - } /* if */ -#endif /* QQ_NO_OVERFLOW_CHECK */ - - pQueue->Array[pQueue->Head] = pEntry; - wmb (); - pQueue->Head = Head; - atomic_inc (&pQueue->EntryCnt); - - return -1; -} /* QQ_PushHead */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/* TRUE entry was added successfully. */ -/* FALSE queue is full. */ -/******************************************************************************/ -char QQ_PushTail (PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry) -{ - unsigned int Tail; - - Tail = pQueue->Tail; - if (Tail == 0) { - Tail = pQueue->Size; - } /* if */ - Tail--; - -#if !defined(QQ_NO_OVERFLOW_CHECK) - if (Tail == pQueue->Head) { - return 0; - } /* if */ -#endif /* QQ_NO_OVERFLOW_CHECK */ - - pQueue->Array[Tail] = pEntry; - wmb (); - pQueue->Tail = Tail; - atomic_inc (&pQueue->EntryCnt); - - return -1; -} /* QQ_PushTail */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -PQQ_ENTRY QQ_PopHead (PQQ_CONTAINER pQueue) -{ - unsigned int Head; - PQQ_ENTRY Entry; - - Head = pQueue->Head; - -#if !defined(QQ_NO_UNDERFLOW_CHECK) - if (Head == pQueue->Tail) { - return (PQQ_ENTRY) 0; - } /* if */ -#endif /* QQ_NO_UNDERFLOW_CHECK */ - - if (Head == 0) { - Head = pQueue->Size; - } /* if */ - Head--; - - Entry = pQueue->Array[Head]; - membar (); - - pQueue->Head = Head; - atomic_dec (&pQueue->EntryCnt); - - return Entry; -} /* QQ_PopHead */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -PQQ_ENTRY QQ_PopTail (PQQ_CONTAINER pQueue) -{ - unsigned int Tail; - PQQ_ENTRY Entry; - - Tail = pQueue->Tail; - -#if !defined(QQ_NO_UNDERFLOW_CHECK) - if (Tail == pQueue->Head) { - return (PQQ_ENTRY) 0; - } /* if */ -#endif /* QQ_NO_UNDERFLOW_CHECK */ - - Entry = pQueue->Array[Tail]; - membar (); - pQueue->Tail = (Tail + 1) % pQueue->Size; - atomic_dec (&pQueue->EntryCnt); - - return Entry; -} /* QQ_PopTail */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -PQQ_ENTRY QQ_GetHead (PQQ_CONTAINER pQueue, unsigned int Idx) -{ - if (Idx >= atomic_read (&pQueue->EntryCnt)) { - return (PQQ_ENTRY) 0; - } - - if (pQueue->Head > Idx) { - Idx = pQueue->Head - Idx; - } else { - Idx = pQueue->Size - (Idx - pQueue->Head); - } - Idx--; - - return pQueue->Array[Idx]; -} - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -PQQ_ENTRY QQ_GetTail (PQQ_CONTAINER pQueue, unsigned int Idx) -{ - if (Idx >= atomic_read (&pQueue->EntryCnt)) { - return (PQQ_ENTRY) 0; - } - - Idx += pQueue->Tail; - if (Idx >= pQueue->Size) { - Idx = Idx - pQueue->Size; - } - - return pQueue->Array[Idx]; -} diff --git a/drivers/net/bcm570x_autoneg.c b/drivers/net/bcm570x_autoneg.c deleted file mode 100644 index 9023796aa0..0000000000 --- a/drivers/net/bcm570x_autoneg.c +++ /dev/null @@ -1,439 +0,0 @@ -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2001 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* History: */ -/******************************************************************************/ -#if !defined(CONFIG_NET_MULTI) -#if INCLUDE_TBI_SUPPORT -#include "bcm570x_autoneg.h" -#include "bcm570x_mm.h" - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -void -MM_AnTxConfig( - PAN_STATE_INFO pAnInfo) -{ - PLM_DEVICE_BLOCK pDevice; - - pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext; - - REG_WR(pDevice, MacCtrl.TxAutoNeg, (LM_UINT32) pAnInfo->TxConfig.AsUSHORT); - - pDevice->MacMode |= MAC_MODE_SEND_CONFIGS; - REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode); -} - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -void -MM_AnTxIdle( - PAN_STATE_INFO pAnInfo) -{ - PLM_DEVICE_BLOCK pDevice; - - pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext; - - pDevice->MacMode &= ~MAC_MODE_SEND_CONFIGS; - REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode); -} - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -char -MM_AnRxConfig( - PAN_STATE_INFO pAnInfo, - unsigned short *pRxConfig) -{ - PLM_DEVICE_BLOCK pDevice; - LM_UINT32 Value32; - char Retcode; - - Retcode = AN_FALSE; - - pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext; - - Value32 = REG_RD(pDevice, MacCtrl.Status); - if(Value32 & MAC_STATUS_RECEIVING_CFG) - { - Value32 = REG_RD(pDevice, MacCtrl.RxAutoNeg); - *pRxConfig = (unsigned short) Value32; - - Retcode = AN_TRUE; - } - - return Retcode; -} - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -void -AutonegInit( - PAN_STATE_INFO pAnInfo) -{ - unsigned long j; - - for(j = 0; j < sizeof(AN_STATE_INFO); j++) - { - ((unsigned char *) pAnInfo)[j] = 0; - } - - /* Initialize the default advertisement register. */ - pAnInfo->mr_adv_full_duplex = 1; - pAnInfo->mr_adv_sym_pause = 1; - pAnInfo->mr_adv_asym_pause = 1; - pAnInfo->mr_an_enable = 1; -} - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -AUTONEG_STATUS -Autoneg8023z( - PAN_STATE_INFO pAnInfo) -{ - unsigned short RxConfig; - unsigned long Delta_us; - AUTONEG_STATUS AnRet; - - /* Get the current time. */ - if(pAnInfo->State == AN_STATE_UNKNOWN) - { - pAnInfo->RxConfig.AsUSHORT = 0; - pAnInfo->CurrentTime_us = 0; - pAnInfo->LinkTime_us = 0; - pAnInfo->AbilityMatchCfg = 0; - pAnInfo->AbilityMatchCnt = 0; - pAnInfo->AbilityMatch = AN_FALSE; - pAnInfo->IdleMatch = AN_FALSE; - pAnInfo->AckMatch = AN_FALSE; - } - - /* Increment the timer tick. This function is called every microsecon. */ -/* pAnInfo->CurrentTime_us++; */ - - /* Set the AbilityMatch, IdleMatch, and AckMatch flags if their */ - /* corresponding conditions are satisfied. */ - if(MM_AnRxConfig(pAnInfo, &RxConfig)) - { - if(RxConfig != pAnInfo->AbilityMatchCfg) - { - pAnInfo->AbilityMatchCfg = RxConfig; - pAnInfo->AbilityMatch = AN_FALSE; - pAnInfo->AbilityMatchCnt = 0; - } - else - { - pAnInfo->AbilityMatchCnt++; - if(pAnInfo->AbilityMatchCnt > 1) - { - pAnInfo->AbilityMatch = AN_TRUE; - pAnInfo->AbilityMatchCfg = RxConfig; - } - } - - if(RxConfig & AN_CONFIG_ACK) - { - pAnInfo->AckMatch = AN_TRUE; - } - else - { - pAnInfo->AckMatch = AN_FALSE; - } - - pAnInfo->IdleMatch = AN_FALSE; - } - else - { - pAnInfo->IdleMatch = AN_TRUE; - - pAnInfo->AbilityMatchCfg = 0; - pAnInfo->AbilityMatchCnt = 0; - pAnInfo->AbilityMatch = AN_FALSE; - pAnInfo->AckMatch = AN_FALSE; - - RxConfig = 0; - } - - /* Save the last Config. */ - pAnInfo->RxConfig.AsUSHORT = RxConfig; - - /* Default return code. */ - AnRet = AUTONEG_STATUS_OK; - - /* Autoneg state machine as defined in 802.3z section 37.3.1.5. */ - switch(pAnInfo->State) - { - case AN_STATE_UNKNOWN: - if(pAnInfo->mr_an_enable || pAnInfo->mr_restart_an) - { - pAnInfo->CurrentTime_us = 0; - pAnInfo->State = AN_STATE_AN_ENABLE; - } - - /* Fall through.*/ - - case AN_STATE_AN_ENABLE: - pAnInfo->mr_an_complete = AN_FALSE; - pAnInfo->mr_page_rx = AN_FALSE; - - if(pAnInfo->mr_an_enable) - { - pAnInfo->LinkTime_us = 0; - pAnInfo->AbilityMatchCfg = 0; - pAnInfo->AbilityMatchCnt = 0; - pAnInfo->AbilityMatch = AN_FALSE; - pAnInfo->IdleMatch = AN_FALSE; - pAnInfo->AckMatch = AN_FALSE; - - pAnInfo->State = AN_STATE_AN_RESTART_INIT; - } - else - { - pAnInfo->State = AN_STATE_DISABLE_LINK_OK; - } - break; - - case AN_STATE_AN_RESTART_INIT: - pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us; - pAnInfo->mr_np_loaded = AN_FALSE; - - pAnInfo->TxConfig.AsUSHORT = 0; - MM_AnTxConfig(pAnInfo); - - AnRet = AUTONEG_STATUS_TIMER_ENABLED; - - pAnInfo->State = AN_STATE_AN_RESTART; - - /* Fall through.*/ - - case AN_STATE_AN_RESTART: - /* Get the current time and compute the delta with the saved */ - /* link timer. */ - Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us; - if(Delta_us > AN_LINK_TIMER_INTERVAL_US) - { - pAnInfo->State = AN_STATE_ABILITY_DETECT_INIT; - } - else - { - AnRet = AUTONEG_STATUS_TIMER_ENABLED; - } - break; - - case AN_STATE_DISABLE_LINK_OK: - AnRet = AUTONEG_STATUS_DONE; - break; - - case AN_STATE_ABILITY_DETECT_INIT: - /* Note: in the state diagram, this variable is set to */ - /* mr_adv_ability<12>. Is this right?. */ - pAnInfo->mr_toggle_tx = AN_FALSE; - - /* Send the config as advertised in the advertisement register. */ - pAnInfo->TxConfig.AsUSHORT = 0; - pAnInfo->TxConfig.D5_FD = pAnInfo->mr_adv_full_duplex; - pAnInfo->TxConfig.D6_HD = pAnInfo->mr_adv_half_duplex; - pAnInfo->TxConfig.D7_PS1 = pAnInfo->mr_adv_sym_pause; - pAnInfo->TxConfig.D8_PS2 = pAnInfo->mr_adv_asym_pause; - pAnInfo->TxConfig.D12_RF1 = pAnInfo->mr_adv_remote_fault1; - pAnInfo->TxConfig.D13_RF2 = pAnInfo->mr_adv_remote_fault2; - pAnInfo->TxConfig.D15_NP = pAnInfo->mr_adv_next_page; - - MM_AnTxConfig(pAnInfo); - - pAnInfo->State = AN_STATE_ABILITY_DETECT; - - break; - - case AN_STATE_ABILITY_DETECT: - if(pAnInfo->AbilityMatch == AN_TRUE && - pAnInfo->RxConfig.AsUSHORT != 0) - { - pAnInfo->State = AN_STATE_ACK_DETECT_INIT; - } - - break; - - case AN_STATE_ACK_DETECT_INIT: - pAnInfo->TxConfig.D14_ACK = 1; - MM_AnTxConfig(pAnInfo); - - pAnInfo->State = AN_STATE_ACK_DETECT; - - /* Fall through. */ - - case AN_STATE_ACK_DETECT: - if(pAnInfo->AckMatch == AN_TRUE) - { - if((pAnInfo->RxConfig.AsUSHORT & ~AN_CONFIG_ACK) == - (pAnInfo->AbilityMatchCfg & ~AN_CONFIG_ACK)) - { - pAnInfo->State = AN_STATE_COMPLETE_ACK_INIT; - } - else - { - pAnInfo->State = AN_STATE_AN_ENABLE; - } - } - else if(pAnInfo->AbilityMatch == AN_TRUE && - pAnInfo->RxConfig.AsUSHORT == 0) - { - pAnInfo->State = AN_STATE_AN_ENABLE; - } - - break; - - case AN_STATE_COMPLETE_ACK_INIT: - /* Make sure invalid bits are not set. */ - if(pAnInfo->RxConfig.bits.D0 || pAnInfo->RxConfig.bits.D1 || - pAnInfo->RxConfig.bits.D2 || pAnInfo->RxConfig.bits.D3 || - pAnInfo->RxConfig.bits.D4 || pAnInfo->RxConfig.bits.D9 || - pAnInfo->RxConfig.bits.D10 || pAnInfo->RxConfig.bits.D11) - { - AnRet = AUTONEG_STATUS_FAILED; - break; - } - - /* Set up the link partner advertisement register. */ - pAnInfo->mr_lp_adv_full_duplex = pAnInfo->RxConfig.D5_FD; - pAnInfo->mr_lp_adv_half_duplex = pAnInfo->RxConfig.D6_HD; - pAnInfo->mr_lp_adv_sym_pause = pAnInfo->RxConfig.D7_PS1; - pAnInfo->mr_lp_adv_asym_pause = pAnInfo->RxConfig.D8_PS2; - pAnInfo->mr_lp_adv_remote_fault1 = pAnInfo->RxConfig.D12_RF1; - pAnInfo->mr_lp_adv_remote_fault2 = pAnInfo->RxConfig.D13_RF2; - pAnInfo->mr_lp_adv_next_page = pAnInfo->RxConfig.D15_NP; - - pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us; - - pAnInfo->mr_toggle_tx = !pAnInfo->mr_toggle_tx; - pAnInfo->mr_toggle_rx = pAnInfo->RxConfig.bits.D11; - pAnInfo->mr_np_rx = pAnInfo->RxConfig.D15_NP; - pAnInfo->mr_page_rx = AN_TRUE; - - pAnInfo->State = AN_STATE_COMPLETE_ACK; - AnRet = AUTONEG_STATUS_TIMER_ENABLED; - - break; - - case AN_STATE_COMPLETE_ACK: - if(pAnInfo->AbilityMatch == AN_TRUE && - pAnInfo->RxConfig.AsUSHORT == 0) - { - pAnInfo->State = AN_STATE_AN_ENABLE; - break; - } - - Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us; - - if(Delta_us > AN_LINK_TIMER_INTERVAL_US) - { - if(pAnInfo->mr_adv_next_page == 0 || - pAnInfo->mr_lp_adv_next_page == 0) - { - pAnInfo->State = AN_STATE_IDLE_DETECT_INIT; - } - else - { - if(pAnInfo->TxConfig.bits.D15 == 0 && - pAnInfo->mr_np_rx == 0) - { - pAnInfo->State = AN_STATE_IDLE_DETECT_INIT; - } - else - { - AnRet = AUTONEG_STATUS_FAILED; - } - } - } - - break; - - case AN_STATE_IDLE_DETECT_INIT: - pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us; - - MM_AnTxIdle(pAnInfo); - - pAnInfo->State = AN_STATE_IDLE_DETECT; - - AnRet = AUTONEG_STATUS_TIMER_ENABLED; - - break; - - case AN_STATE_IDLE_DETECT: - if(pAnInfo->AbilityMatch == AN_TRUE && - pAnInfo->RxConfig.AsUSHORT == 0) - { - pAnInfo->State = AN_STATE_AN_ENABLE; - break; - } - - Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us; - if(Delta_us > AN_LINK_TIMER_INTERVAL_US) - { -#if 0 -/* if(pAnInfo->IdleMatch == AN_TRUE) */ -/* { */ -#endif - pAnInfo->State = AN_STATE_LINK_OK; -#if 0 -/* } */ -/* else */ -/* { */ -/* AnRet = AUTONEG_STATUS_FAILED; */ -/* break; */ -/* } */ -#endif - } - - break; - - case AN_STATE_LINK_OK: - pAnInfo->mr_an_complete = AN_TRUE; - pAnInfo->mr_link_ok = AN_TRUE; - AnRet = AUTONEG_STATUS_DONE; - - break; - - case AN_STATE_NEXT_PAGE_WAIT_INIT: - break; - - case AN_STATE_NEXT_PAGE_WAIT: - break; - - default: - AnRet = AUTONEG_STATUS_FAILED; - break; - } - - return AnRet; -} -#endif /* INCLUDE_TBI_SUPPORT */ - -#endif /* !defined(CONFIG_NET_MULTI) */ diff --git a/drivers/net/bcm570x_autoneg.h b/drivers/net/bcm570x_autoneg.h deleted file mode 100644 index 7830944b8a..0000000000 --- a/drivers/net/bcm570x_autoneg.h +++ /dev/null @@ -1,408 +0,0 @@ -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2001 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* History: */ -/******************************************************************************/ - - -#ifndef AUTONEG_H -#define AUTONEG_H - - -/******************************************************************************/ -/* Constants. */ -/******************************************************************************/ - -#define AN_LINK_TIMER_INTERVAL_US 9000 /* 10ms */ - -/* TRUE, FALSE */ -#define AN_TRUE 1 -#define AN_FALSE 0 - - -/******************************************************************************/ -/* Main data structure for keeping track of 802.3z auto-negotation state */ -/* variables as shown in Figure 37-6 of the IEEE 802.3z specification. */ -/******************************************************************************/ - -typedef struct -{ - /* Current auto-negotiation state. */ - unsigned long State; - #define AN_STATE_UNKNOWN 0 - #define AN_STATE_AN_ENABLE 1 - #define AN_STATE_AN_RESTART_INIT 2 - #define AN_STATE_AN_RESTART 3 - #define AN_STATE_DISABLE_LINK_OK 4 - #define AN_STATE_ABILITY_DETECT_INIT 5 - #define AN_STATE_ABILITY_DETECT 6 - #define AN_STATE_ACK_DETECT_INIT 7 - #define AN_STATE_ACK_DETECT 8 - #define AN_STATE_COMPLETE_ACK_INIT 9 - #define AN_STATE_COMPLETE_ACK 10 - #define AN_STATE_IDLE_DETECT_INIT 11 - #define AN_STATE_IDLE_DETECT 12 - #define AN_STATE_LINK_OK 13 - #define AN_STATE_NEXT_PAGE_WAIT_INIT 14 - #define AN_STATE_NEXT_PAGE_WAIT 16 - - /* Link timer. */ - unsigned long LinkTime_us; - - /* Current time. */ - unsigned long CurrentTime_us; - - /* Need these values for consistency check. */ - unsigned short AbilityMatchCfg; - - /* Ability, idle, and ack match functions. */ - unsigned long AbilityMatchCnt; - char AbilityMatch; - char IdleMatch; - char AckMatch; - - /* Tx config data */ - union - { - /* The TxConfig register is arranged as follows: */ - /* */ - /* MSB LSB */ - /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */ - /* | D7| D6| D5| D4| D3| D2| D1| D0|D15|D14|D13|D12|D11|D10| D9| D8| */ - /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */ - struct - { -#ifdef BIG_ENDIAN_HOST - unsigned int D7:1; /* PS1 */ - unsigned int D6:1; /* HD */ - unsigned int D5:1; /* FD */ - unsigned int D4:1; - unsigned int D3:1; - unsigned int D2:1; - unsigned int D1:1; - unsigned int D0:1; - unsigned int D15:1; /* NP */ - unsigned int D14:1; /* ACK */ - unsigned int D13:1; /* RF2 */ - unsigned int D12:1; /* RF1 */ - unsigned int D11:1; - unsigned int D10:1; - unsigned int D9:1; - unsigned int D8:1; /* PS2 */ -#else /* BIG_ENDIAN_HOST */ - unsigned int D8:1; /* PS2 */ - unsigned int D9:1; - unsigned int D10:1; - unsigned int D11:1; - unsigned int D12:1; /* RF1 */ - unsigned int D13:1; /* RF2 */ - unsigned int D14:1; /* ACK */ - unsigned int D15:1; /* NP */ - unsigned int D0:1; - unsigned int D1:1; - unsigned int D2:1; - unsigned int D3:1; - unsigned int D4:1; - unsigned int D5:1; /* FD */ - unsigned int D6:1; /* HD */ - unsigned int D7:1; /* PS1 */ -#endif - } bits; - - unsigned short AsUSHORT; - - #define D8_PS2 bits.D8 - #define D12_RF1 bits.D12 - #define D13_RF2 bits.D13 - #define D14_ACK bits.D14 - #define D15_NP bits.D15 - #define D5_FD bits.D5 - #define D6_HD bits.D6 - #define D7_PS1 bits.D7 - } TxConfig; - - /* Rx config data */ - union - { - /* The RxConfig register is arranged as follows: */ - /* */ - /* MSB LSB */ - /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */ - /* | D7| D6| D5| D4| D3| D2| D1| D0|D15|D14|D13|D12|D11|D10| D9| D8| */ - /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */ - struct - { -#ifdef BIG_ENDIAN_HOST - unsigned int D7:1; /* PS1 */ - unsigned int D6:1; /* HD */ - unsigned int D5:1; /* FD */ - unsigned int D4:1; - unsigned int D3:1; - unsigned int D2:1; - unsigned int D1:1; - unsigned int D0:1; - unsigned int D15:1; /* NP */ - unsigned int D14:1; /* ACK */ - unsigned int D13:1; /* RF2 */ - unsigned int D12:1; /* RF1 */ - unsigned int D11:1; - unsigned int D10:1; - unsigned int D9:1; - unsigned int D8:1; /* PS2 */ -#else /* BIG_ENDIAN_HOST */ - unsigned int D8:1; /* PS2 */ - unsigned int D9:1; - unsigned int D10:1; - unsigned int D11:1; - unsigned int D12:1; /* RF1 */ - unsigned int D13:1; /* RF2 */ - unsigned int D14:1; /* ACK */ - unsigned int D15:1; /* NP */ - unsigned int D0:1; - unsigned int D1:1; - unsigned int D2:1; - unsigned int D3:1; - unsigned int D4:1; - unsigned int D5:1; /* FD */ - unsigned int D6:1; /* HD */ - unsigned int D7:1; /* PS1 */ -#endif - } bits; - - unsigned short AsUSHORT; - } RxConfig; - - #define AN_CONFIG_NP 0x0080 - #define AN_CONFIG_ACK 0x0040 - #define AN_CONFIG_RF2 0x0020 - #define AN_CONFIG_RF1 0x0010 - #define AN_CONFIG_PS2 0x0001 - #define AN_CONFIG_PS1 0x8000 - #define AN_CONFIG_HD 0x4000 - #define AN_CONFIG_FD 0x2000 - - - /* Management registers. */ - - /* Control register. */ - union - { - struct - { - unsigned int an_enable:1; - unsigned int loopback:1; - unsigned int reset:1; - unsigned int restart_an:1; - } bits; - - unsigned short AsUSHORT; - - #define mr_an_enable Mr0.bits.an_enable - #define mr_loopback Mr0.bits.loopback - #define mr_main_reset Mr0.bits.reset - #define mr_restart_an Mr0.bits.restart_an - } Mr0; - - /* Status register. */ - union - { - struct - { - unsigned int an_complete:1; - unsigned int link_ok:1; - } bits; - - unsigned short AsUSHORT; - - #define mr_an_complete Mr1.bits.an_complete - #define mr_link_ok Mr1.bits.link_ok - } Mr1; - - /* Advertisement register. */ - union - { - struct - { - unsigned int reserved_4:5; - unsigned int full_duplex:1; - unsigned int half_duplex:1; - unsigned int sym_pause:1; - unsigned int asym_pause:1; - unsigned int reserved_11:3; - unsigned int remote_fault1:1; - unsigned int remote_fault2:1; - unsigned int reserved_14:1; - unsigned int next_page:1; - } bits; - - unsigned short AsUSHORT; - - #define mr_adv_full_duplex Mr4.bits.full_duplex - #define mr_adv_half_duplex Mr4.bits.half_duplex - #define mr_adv_sym_pause Mr4.bits.sym_pause - #define mr_adv_asym_pause Mr4.bits.asym_pause - #define mr_adv_remote_fault1 Mr4.bits.remote_fault1 - #define mr_adv_remote_fault2 Mr4.bits.remote_fault2 - #define mr_adv_next_page Mr4.bits.next_page - } Mr4; - - /* Link partner advertisement register. */ - union - { - struct - { - unsigned int reserved_4:5; - unsigned int lp_full_duplex:1; - unsigned int lp_half_duplex:1; - unsigned int lp_sym_pause:1; - unsigned int lp_asym_pause:1; - unsigned int reserved_11:3; - unsigned int lp_remote_fault1:1; - unsigned int lp_remote_fault2:1; - unsigned int lp_ack:1; - unsigned int lp_next_page:1; - } bits; - - unsigned short AsUSHORT; - - #define mr_lp_adv_full_duplex Mr5.bits.lp_full_duplex - #define mr_lp_adv_half_duplex Mr5.bits.lp_half_duplex - #define mr_lp_adv_sym_pause Mr5.bits.lp_sym_pause - #define mr_lp_adv_asym_pause Mr5.bits.lp_asym_pause - #define mr_lp_adv_remote_fault1 Mr5.bits.lp_remote_fault1 - #define mr_lp_adv_remote_fault2 Mr5.bits.lp_remote_fault2 - #define mr_lp_adv_next_page Mr5.bits.lp_next_page - } Mr5; - - /* Auto-negotiation expansion register. */ - union - { - struct - { - unsigned int reserved_0:1; - unsigned int page_received:1; - unsigned int next_pageable:1; - unsigned int reserved_15:13; - } bits; - - unsigned short AsUSHORT; - } Mr6; - - /* Auto-negotiation next page transmit register. */ - union - { - struct - { - unsigned int code_field:11; - unsigned int toggle:1; - unsigned int ack2:1; - unsigned int message_page:1; - unsigned int reserved_14:1; - unsigned int next_page:1; - } bits; - - unsigned short AsUSHORT; - - #define mr_np_tx Mr7.AsUSHORT - } Mr7; - - /* Auto-negotiation link partner ability register. */ - union - { - struct - { - unsigned int code_field:11; - unsigned int toggle:1; - unsigned int ack2:1; - unsigned int message_page:1; - unsigned int ack:1; - unsigned int next_page:1; - } bits; - - unsigned short AsUSHORT; - - #define mr_lp_np_rx Mr8.AsUSHORT - } Mr8; - - /* Extended status register. */ - union - { - struct - { - unsigned int reserved_11:12; - unsigned int base1000_t_hd:1; - unsigned int base1000_t_fd:1; - unsigned int base1000_x_hd:1; - unsigned int base1000_x_fd:1; - } bits; - - unsigned short AsUSHORT; - } Mr15; - - /* Miscellaneous state variables. */ - union - { - struct - { - unsigned int toggle_tx:1; - unsigned int toggle_rx:1; - unsigned int np_rx:1; - unsigned int page_rx:1; - unsigned int np_loaded:1; - } bits; - - unsigned short AsUSHORT; - - #define mr_toggle_tx MrMisc.bits.toggle_tx - #define mr_toggle_rx MrMisc.bits.toggle_rx - #define mr_np_rx MrMisc.bits.np_rx - #define mr_page_rx MrMisc.bits.page_rx - #define mr_np_loaded MrMisc.bits.np_loaded - } MrMisc; - - - /* Implement specifics */ - - /* Pointer to the operating system specific data structure. */ - void *pContext; -} AN_STATE_INFO, *PAN_STATE_INFO; - - -/******************************************************************************/ -/* Return code of Autoneg8023z. */ -/******************************************************************************/ - -typedef enum -{ - AUTONEG_STATUS_OK = 0, - AUTONEG_STATUS_DONE = 1, - AUTONEG_STATUS_TIMER_ENABLED = 2, - AUTONEG_STATUS_FAILED = 0xfffffff -} AUTONEG_STATUS, *PAUTONEG_STATUS; - - -/******************************************************************************/ -/* Function prototypes. */ -/******************************************************************************/ - -AUTONEG_STATUS Autoneg8023z(PAN_STATE_INFO pAnInfo); -void AutonegInit(PAN_STATE_INFO pAnInfo); - - -/******************************************************************************/ -/* The following functions are defined in the os-dependent module. */ -/******************************************************************************/ - -void MM_AnTxConfig(PAN_STATE_INFO pAnInfo); -void MM_AnTxIdle(PAN_STATE_INFO pAnInfo); -char MM_AnRxConfig(PAN_STATE_INFO pAnInfo, unsigned short *pRxConfig); - - -#endif /* AUTONEG_H */ diff --git a/drivers/net/bcm570x_bits.h b/drivers/net/bcm570x_bits.h deleted file mode 100644 index 615d61e98b..0000000000 --- a/drivers/net/bcm570x_bits.h +++ /dev/null @@ -1,57 +0,0 @@ - -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* History: */ -/* 02/25/00 Hav Khauv Initial version. */ -/******************************************************************************/ - -#ifndef BITS_H -#define BITS_H - - -/******************************************************************************/ -/* Bit Mask definitions */ -/******************************************************************************/ -#define BIT_NONE 0x00 -#define BIT_0 0x01 -#define BIT_1 0x02 -#define BIT_2 0x04 -#define BIT_3 0x08 -#define BIT_4 0x10 -#define BIT_5 0x20 -#define BIT_6 0x40 -#define BIT_7 0x80 -#define BIT_8 0x0100 -#define BIT_9 0x0200 -#define BIT_10 0x0400 -#define BIT_11 0x0800 -#define BIT_12 0x1000 -#define BIT_13 0x2000 -#define BIT_14 0x4000 -#define BIT_15 0x8000 -#define BIT_16 0x010000 -#define BIT_17 0x020000 -#define BIT_18 0x040000 -#define BIT_19 0x080000 -#define BIT_20 0x100000 -#define BIT_21 0x200000 -#define BIT_22 0x400000 -#define BIT_23 0x800000 -#define BIT_24 0x01000000 -#define BIT_25 0x02000000 -#define BIT_26 0x04000000 -#define BIT_27 0x08000000 -#define BIT_28 0x10000000 -#define BIT_29 0x20000000 -#define BIT_30 0x40000000 -#define BIT_31 0x80000000 - -#endif /* BITS_H */ diff --git a/drivers/net/bcm570x_debug.h b/drivers/net/bcm570x_debug.h deleted file mode 100644 index 88e209b0fb..0000000000 --- a/drivers/net/bcm570x_debug.h +++ /dev/null @@ -1,109 +0,0 @@ - -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* History: */ -/* 02/25/00 Hav Khauv Initial version. */ -/******************************************************************************/ - -#ifndef DEBUG_H -#define DEBUG_H - -#ifdef VXWORKS -#include -#endif - -/******************************************************************************/ -/* Debug macros */ -/******************************************************************************/ - -/* Code path for controlling output debug messages. */ -/* Define your code path here. */ -#define CP_INIT 0x010000 -#define CP_SEND 0x020000 -#define CP_RCV 0x040000 -#define CP_INT 0x080000 -#define CP_UINIT 0x100000 -#define CP_RESET 0x200000 - -#define CP_ALL (CP_INIT | CP_SEND | CP_RCV | CP_INT | \ - CP_RESET | CP_UINIT) - -#define CP_MASK 0xffff0000 - - -/* Debug message levels. */ -#define LV_VERBOSE 0x03 -#define LV_INFORM 0x02 -#define LV_WARN 0x01 -#define LV_FATAL 0x00 - -#define LV_MASK 0xffff - - -/* Code path and messsage level combined. These are the first argument of */ -/* the DbgMessage macro. */ -#define INIT_V (CP_INIT | LV_VERBOSE) -#define INIT_I (CP_INIT | LV_INFORM) -#define INIT_W (CP_INIT | LV_WARN) -#define SEND_V (CP_SEND | LV_VERBOSE) -#define SEND_I (CP_SEND | LV_INFORM) -#define SEND_W (CP_SEND | LV_WARN) -#define RCV_V (CP_RCV | LV_VERBOSE) -#define RCV_I (CP_RCV | LV_INFORM) -#define RCV_W (CP_RCV | LV_WARN) -#define INT_V (CP_INT | LV_VERBOSE) -#define INT_I (CP_INT | LV_INFORM) -#define INT_W (CP_INT | LV_WARN) -#define UINIT_V (CP_UINIT | LV_VERBOSE) -#define UINIT_I (CP_UINIT | LV_INFORM) -#define UINIT_W (CP_UINIT | LV_WARN) -#define RESET_V (CP_RESET | LV_VERBOSE) -#define RESET_I (CP_RESET | LV_INFORM) -#define RESET_W (CP_RESET | LV_WARN) -#define CPALL_V (CP_ALL | LV_VERBOSE) -#define CPALL_I (CP_ALL | LV_INFORM) -#define CPALL_W (CP_ALL | LV_WARN) - - -/* All code path message levels. */ -#define FATAL (CP_ALL | LV_FATAL) -#define WARN (CP_ALL | LV_WARN) -#define INFORM (CP_ALL | LV_INFORM) -#define VERBOSE (CP_ALL | LV_VERBOSE) - - -/* These constants control the message output. */ -/* Set your debug message output level and code path here. */ -#ifndef DBG_MSG_CP -#define DBG_MSG_CP CP_ALL /* Where to output messages. */ -#endif - -#ifndef DBG_MSG_LV -#define DBG_MSG_LV LV_VERBOSE /* Level of message output. */ -#endif - -/* DbgMessage macro. */ -#if DBG -#define DbgMessage(CNTRL, MESSAGE) \ - if((CNTRL & DBG_MSG_CP) && ((CNTRL & LV_MASK) <= DBG_MSG_LV)) \ - printf MESSAGE -#define DbgBreak() DbgBreakPoint() -#undef STATIC -#define STATIC -#else -#define DbgMessage(CNTRL, MESSAGE) -#define DbgBreak() -#undef STATIC -#define STATIC static -#endif /* DBG */ - - -#endif /* DEBUG_H */ diff --git a/drivers/net/bcm570x_lm.h b/drivers/net/bcm570x_lm.h deleted file mode 100644 index c07b76792d..0000000000 --- a/drivers/net/bcm570x_lm.h +++ /dev/null @@ -1,434 +0,0 @@ - -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* History: */ -/* 02/25/00 Hav Khauv Initial version. */ -/******************************************************************************/ - -#ifndef LM_H -#define LM_H - -#include "bcm570x_queue.h" -#include "bcm570x_bits.h" - -/******************************************************************************/ -/* Basic types. */ -/******************************************************************************/ - -typedef char LM_CHAR, *PLM_CHAR; -typedef unsigned int LM_UINT, *PLM_UINT; -typedef unsigned char LM_UINT8, *PLM_UINT8; -typedef unsigned short LM_UINT16, *PLM_UINT16; -typedef unsigned int LM_UINT32, *PLM_UINT32; -typedef unsigned int LM_COUNTER, *PLM_COUNTER; -typedef void LM_VOID, *PLM_VOID; -typedef char LM_BOOL, *PLM_BOOL; - -/* 64bit value. */ -typedef struct { -#ifdef BIG_ENDIAN_HOST - LM_UINT32 High; - LM_UINT32 Low; -#else /* BIG_ENDIAN_HOST */ - LM_UINT32 Low; - LM_UINT32 High; -#endif /* !BIG_ENDIAN_HOST */ -} LM_UINT64, *PLM_UINT64; - -typedef LM_UINT64 LM_PHYSICAL_ADDRESS, *PLM_PHYSICAL_ADDRESS; - -/* void LM_INC_PHYSICAL_ADDRESS(PLM_PHYSICAL_ADDRESS pAddr,LM_UINT32 IncSize) */ -#define LM_INC_PHYSICAL_ADDRESS(pAddr, IncSize) \ - { \ - LM_UINT32 OrgLow; \ - \ - OrgLow = (pAddr)->Low; \ - (pAddr)->Low += IncSize; \ - if((pAddr)->Low < OrgLow) { \ - (pAddr)->High++; /* Wrap around. */ \ - } \ - } - -#ifndef NULL -#define NULL ((void *) 0) -#endif /* NULL */ - -#ifndef OFFSETOF -#define OFFSETOF(_s, _m) (MM_UINT_PTR(&(((_s *) 0)->_m))) -#endif /* OFFSETOF */ - -/******************************************************************************/ -/* Simple macros. */ -/******************************************************************************/ - -#define IS_ETH_BROADCAST(_pEthAddr) \ - (((unsigned char *) (_pEthAddr))[0] == ((unsigned char) 0xff)) - -#define IS_ETH_MULTICAST(_pEthAddr) \ - (((unsigned char *) (_pEthAddr))[0] & ((unsigned char) 0x01)) - -#define IS_ETH_ADDRESS_EQUAL(_pEtherAddr1, _pEtherAddr2) \ - ((((unsigned char *) (_pEtherAddr1))[0] == \ - ((unsigned char *) (_pEtherAddr2))[0]) && \ - (((unsigned char *) (_pEtherAddr1))[1] == \ - ((unsigned char *) (_pEtherAddr2))[1]) && \ - (((unsigned char *) (_pEtherAddr1))[2] == \ - ((unsigned char *) (_pEtherAddr2))[2]) && \ - (((unsigned char *) (_pEtherAddr1))[3] == \ - ((unsigned char *) (_pEtherAddr2))[3]) && \ - (((unsigned char *) (_pEtherAddr1))[4] == \ - ((unsigned char *) (_pEtherAddr2))[4]) && \ - (((unsigned char *) (_pEtherAddr1))[5] == \ - ((unsigned char *) (_pEtherAddr2))[5])) - -#define COPY_ETH_ADDRESS(_Src, _Dst) \ - ((unsigned char *) (_Dst))[0] = ((unsigned char *) (_Src))[0]; \ - ((unsigned char *) (_Dst))[1] = ((unsigned char *) (_Src))[1]; \ - ((unsigned char *) (_Dst))[2] = ((unsigned char *) (_Src))[2]; \ - ((unsigned char *) (_Dst))[3] = ((unsigned char *) (_Src))[3]; \ - ((unsigned char *) (_Dst))[4] = ((unsigned char *) (_Src))[4]; \ - ((unsigned char *) (_Dst))[5] = ((unsigned char *) (_Src))[5]; - -/******************************************************************************/ -/* Constants. */ -/******************************************************************************/ - -#define ETHERNET_ADDRESS_SIZE 6 -#define ETHERNET_PACKET_HEADER_SIZE 14 -#define MIN_ETHERNET_PACKET_SIZE 64 /* with 4 byte crc. */ -#define MAX_ETHERNET_PACKET_SIZE 1518 /* with 4 byte crc. */ -#define MIN_ETHERNET_PACKET_SIZE_NO_CRC 60 -#define MAX_ETHERNET_PACKET_SIZE_NO_CRC 1514 -#define MAX_ETHERNET_PACKET_BUFFER_SIZE 1536 /* A nice even number. */ - -#ifndef LM_MAX_MC_TABLE_SIZE -#define LM_MAX_MC_TABLE_SIZE 32 -#endif /* LM_MAX_MC_TABLE_SIZE */ -#define LM_MC_ENTRY_SIZE (ETHERNET_ADDRESS_SIZE+1) -#define LM_MC_INSTANCE_COUNT_INDEX (LM_MC_ENTRY_SIZE-1) - -/* Receive filter masks. */ -#define LM_ACCEPT_UNICAST 0x0001 -#define LM_ACCEPT_MULTICAST 0x0002 -#define LM_ACCEPT_ALL_MULTICAST 0x0004 -#define LM_ACCEPT_BROADCAST 0x0008 -#define LM_ACCEPT_ERROR_PACKET 0x0010 - -#define LM_PROMISCUOUS_MODE 0x10000 - -/******************************************************************************/ -/* PCI registers. */ -/******************************************************************************/ - -#define PCI_VENDOR_ID_REG 0x00 -#define PCI_DEVICE_ID_REG 0x02 - -#define PCI_COMMAND_REG 0x04 -#define PCI_IO_SPACE_ENABLE 0x0001 -#define PCI_MEM_SPACE_ENABLE 0x0002 -#define PCI_BUSMASTER_ENABLE 0x0004 -#define PCI_MEMORY_WRITE_INVALIDATE 0x0010 -#define PCI_PARITY_ERROR_ENABLE 0x0040 -#define PCI_SYSTEM_ERROR_ENABLE 0x0100 -#define PCI_FAST_BACK_TO_BACK_ENABLE 0x0200 - -#define PCI_STATUS_REG 0x06 -#define PCI_REV_ID_REG 0x08 - -#define PCI_CACHE_LINE_SIZE_REG 0x0c - -#define PCI_IO_BASE_ADDR_REG 0x10 -#define PCI_IO_BASE_ADDR_MASK 0xfffffff0 - -#define PCI_MEM_BASE_ADDR_LOW 0x10 -#define PCI_MEM_BASE_ADDR_HIGH 0x14 - -#define PCI_SUBSYSTEM_VENDOR_ID_REG 0x2c -#define PCI_SUBSYSTEM_ID_REG 0x2e -#define PCI_INT_LINE_REG 0x3c - -#define PCIX_CAP_REG 0x40 -#define PCIX_ENABLE_RELAXED_ORDERING BIT_17 - -/******************************************************************************/ -/* Fragment structure. */ -/******************************************************************************/ - -typedef struct { - LM_UINT32 FragSize; - LM_PHYSICAL_ADDRESS FragBuf; -} LM_FRAG, *PLM_FRAG; - -typedef struct { - /* FragCount is initialized for the caller to the maximum array size, on */ - /* return FragCount is the number of the actual fragments in the array. */ - LM_UINT32 FragCount; - - /* Total buffer size. */ - LM_UINT32 TotalSize; - - /* Fragment array buffer. */ - LM_FRAG Fragments[1]; -} LM_FRAG_LIST, *PLM_FRAG_LIST; - -#define DECLARE_FRAG_LIST_BUFFER_TYPE(_FRAG_LIST_TYPE_NAME, _MAX_FRAG_COUNT) \ - typedef struct { \ - LM_FRAG_LIST FragList; \ - LM_FRAG FragListBuffer[_MAX_FRAG_COUNT-1]; \ - } _FRAG_LIST_TYPE_NAME, *P##_FRAG_LIST_TYPE_NAME - -/******************************************************************************/ -/* Status codes. */ -/******************************************************************************/ - -#define LM_STATUS_SUCCESS 0 -#define LM_STATUS_FAILURE 1 - -#define LM_STATUS_INTERRUPT_ACTIVE 2 -#define LM_STATUS_INTERRUPT_NOT_ACTIVE 3 - -#define LM_STATUS_LINK_ACTIVE 4 -#define LM_STATUS_LINK_DOWN 5 -#define LM_STATUS_LINK_SETTING_MISMATCH 6 - -#define LM_STATUS_TOO_MANY_FRAGMENTS 7 -#define LM_STATUS_TRANSMIT_ABORTED 8 -#define LM_STATUS_TRANSMIT_ERROR 9 -#define LM_STATUS_RECEIVE_ABORTED 10 -#define LM_STATUS_RECEIVE_ERROR 11 -#define LM_STATUS_INVALID_PACKET_SIZE 12 -#define LM_STATUS_OUT_OF_MAP_REGISTERS 13 -#define LM_STATUS_UNKNOWN_ADAPTER 14 - -typedef LM_UINT LM_STATUS, *PLM_STATUS; - -/******************************************************************************/ -/* Requested media type. */ -/******************************************************************************/ - -#define LM_REQUESTED_MEDIA_TYPE_AUTO 0 -#define LM_REQUESTED_MEDIA_TYPE_BNC 1 -#define LM_REQUESTED_MEDIA_TYPE_UTP_AUTO 2 -#define LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS 3 -#define LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX 4 -#define LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS 5 -#define LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX 6 -#define LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS 7 -#define LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX 8 -#define LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS 9 -#define LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX 10 -#define LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS 11 -#define LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX 12 -#define LM_REQUESTED_MEDIA_TYPE_MAC_LOOPBACK 0xfffe -#define LM_REQUESTED_MEDIA_TYPE_PHY_LOOPBACK 0xffff - -typedef LM_UINT32 LM_REQUESTED_MEDIA_TYPE, *PLM_REQUESTED_MEDIA_TYPE; - -/******************************************************************************/ -/* Media type. */ -/******************************************************************************/ - -#define LM_MEDIA_TYPE_UNKNOWN -1 -#define LM_MEDIA_TYPE_AUTO 0 -#define LM_MEDIA_TYPE_UTP 1 -#define LM_MEDIA_TYPE_BNC 2 -#define LM_MEDIA_TYPE_AUI 3 -#define LM_MEDIA_TYPE_FIBER 4 - -typedef LM_UINT32 LM_MEDIA_TYPE, *PLM_MEDIA_TYPE; - -/******************************************************************************/ -/* Line speed. */ -/******************************************************************************/ - -#define LM_LINE_SPEED_UNKNOWN 0 -#define LM_LINE_SPEED_10MBPS 1 -#define LM_LINE_SPEED_100MBPS 2 -#define LM_LINE_SPEED_1000MBPS 3 - -typedef LM_UINT32 LM_LINE_SPEED, *PLM_LINE_SPEED; - -/******************************************************************************/ -/* Duplex mode. */ -/******************************************************************************/ - -#define LM_DUPLEX_MODE_UNKNOWN 0 -#define LM_DUPLEX_MODE_HALF 1 -#define LM_DUPLEX_MODE_FULL 2 - -typedef LM_UINT32 LM_DUPLEX_MODE, *PLM_DUPLEX_MODE; - -/******************************************************************************/ -/* Power state. */ -/******************************************************************************/ - -#define LM_POWER_STATE_D0 0 -#define LM_POWER_STATE_D1 1 -#define LM_POWER_STATE_D2 2 -#define LM_POWER_STATE_D3 3 - -typedef LM_UINT32 LM_POWER_STATE, *PLM_POWER_STATE; - -/******************************************************************************/ -/* Task offloading. */ -/******************************************************************************/ - -#define LM_TASK_OFFLOAD_NONE 0x0000 -#define LM_TASK_OFFLOAD_TX_IP_CHECKSUM 0x0001 -#define LM_TASK_OFFLOAD_RX_IP_CHECKSUM 0x0002 -#define LM_TASK_OFFLOAD_TX_TCP_CHECKSUM 0x0004 -#define LM_TASK_OFFLOAD_RX_TCP_CHECKSUM 0x0008 -#define LM_TASK_OFFLOAD_TX_UDP_CHECKSUM 0x0010 -#define LM_TASK_OFFLOAD_RX_UDP_CHECKSUM 0x0020 -#define LM_TASK_OFFLOAD_TCP_SEGMENTATION 0x0040 - -typedef LM_UINT32 LM_TASK_OFFLOAD, *PLM_TASK_OFFLOAD; - -/******************************************************************************/ -/* Flow control. */ -/******************************************************************************/ - -#define LM_FLOW_CONTROL_NONE 0x00 -#define LM_FLOW_CONTROL_RECEIVE_PAUSE 0x01 -#define LM_FLOW_CONTROL_TRANSMIT_PAUSE 0x02 -#define LM_FLOW_CONTROL_RX_TX_PAUSE (LM_FLOW_CONTROL_RECEIVE_PAUSE | \ - LM_FLOW_CONTROL_TRANSMIT_PAUSE) - -/* This value can be or-ed with RECEIVE_PAUSE and TRANSMIT_PAUSE. If the */ -/* auto-negotiation is disabled and the RECEIVE_PAUSE and TRANSMIT_PAUSE */ -/* bits are set, then flow control is enabled regardless of link partner's */ -/* flow control capability. */ -#define LM_FLOW_CONTROL_AUTO_PAUSE 0x80000000 - -typedef LM_UINT32 LM_FLOW_CONTROL, *PLM_FLOW_CONTROL; - -/******************************************************************************/ -/* Wake up mode. */ -/******************************************************************************/ - -#define LM_WAKE_UP_MODE_NONE 0 -#define LM_WAKE_UP_MODE_MAGIC_PACKET 1 -#define LM_WAKE_UP_MODE_NWUF 2 -#define LM_WAKE_UP_MODE_LINK_CHANGE 4 - -typedef LM_UINT32 LM_WAKE_UP_MODE, *PLM_WAKE_UP_MODE; - -/******************************************************************************/ -/* Counters. */ -/******************************************************************************/ - -#define LM_COUNTER_FRAMES_XMITTED_OK 0 -#define LM_COUNTER_FRAMES_RECEIVED_OK 1 -#define LM_COUNTER_ERRORED_TRANSMIT_COUNT 2 -#define LM_COUNTER_ERRORED_RECEIVE_COUNT 3 -#define LM_COUNTER_RCV_CRC_ERROR 4 -#define LM_COUNTER_ALIGNMENT_ERROR 5 -#define LM_COUNTER_SINGLE_COLLISION_FRAMES 6 -#define LM_COUNTER_MULTIPLE_COLLISION_FRAMES 7 -#define LM_COUNTER_FRAMES_DEFERRED 8 -#define LM_COUNTER_MAX_COLLISIONS 9 -#define LM_COUNTER_RCV_OVERRUN 10 -#define LM_COUNTER_XMIT_UNDERRUN 11 -#define LM_COUNTER_UNICAST_FRAMES_XMIT 12 -#define LM_COUNTER_MULTICAST_FRAMES_XMIT 13 -#define LM_COUNTER_BROADCAST_FRAMES_XMIT 14 -#define LM_COUNTER_UNICAST_FRAMES_RCV 15 -#define LM_COUNTER_MULTICAST_FRAMES_RCV 16 -#define LM_COUNTER_BROADCAST_FRAMES_RCV 17 - -typedef LM_UINT32 LM_COUNTER_TYPE, *PLM_COUNTER_TYPE; - -/******************************************************************************/ -/* Forward definition. */ -/******************************************************************************/ - -typedef struct _LM_DEVICE_BLOCK *PLM_DEVICE_BLOCK; -typedef struct _LM_PACKET *PLM_PACKET; - -/******************************************************************************/ -/* Function prototypes. */ -/******************************************************************************/ - -LM_STATUS LM_GetAdapterInfo (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_InitializeAdapter (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_ResetAdapter (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_DisableInterrupt (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_EnableInterrupt (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_SendPacket (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket); -LM_STATUS LM_ServiceInterrupts (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_QueueRxPackets (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_SetReceiveMask (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask); -LM_STATUS LM_Halt (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_Abort (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_MulticastAdd (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress); -LM_STATUS LM_MulticastDel (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress); -LM_STATUS LM_MulticastClear (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_SetMacAddress (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_LoopbackAddress (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pAddress); - -LM_UINT32 LM_GetCrcCounter (PLM_DEVICE_BLOCK pDevice); - -LM_WAKE_UP_MODE LM_PMCapabilities (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_NwufAdd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize, - LM_UINT8 * pByteMask, LM_UINT8 * pPattern); -LM_STATUS LM_NwufRemove (PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize, - LM_UINT8 * pByteMask, LM_UINT8 * pPattern); -LM_STATUS LM_SetPowerState (PLM_DEVICE_BLOCK pDevice, - LM_POWER_STATE PowerLevel); - -LM_VOID LM_ReadPhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg, - PLM_UINT32 pData32); -LM_VOID LM_WritePhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg, - LM_UINT32 Data32); - -LM_STATUS LM_ControlLoopBack (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Control); -LM_STATUS LM_SetupPhy (PLM_DEVICE_BLOCK pDevice); -int LM_BlinkLED (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDuration); - -/******************************************************************************/ -/* These are the OS specific functions called by LMAC. */ -/******************************************************************************/ - -LM_STATUS MM_ReadConfig16 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, - LM_UINT16 * pValue16); -LM_STATUS MM_WriteConfig16 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, - LM_UINT16 Value16); -LM_STATUS MM_ReadConfig32 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, - LM_UINT32 * pValue32); -LM_STATUS MM_WriteConfig32 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, - LM_UINT32 Value32); -LM_STATUS MM_MapMemBase (PLM_DEVICE_BLOCK pDevice); -LM_STATUS MM_MapIoBase (PLM_DEVICE_BLOCK pDevice); -LM_STATUS MM_IndicateRxPackets (PLM_DEVICE_BLOCK pDevice); -LM_STATUS MM_IndicateTxPackets (PLM_DEVICE_BLOCK pDevice); -LM_STATUS MM_StartTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket); -LM_STATUS MM_CompleteTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket); -LM_STATUS MM_AllocateMemory (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize, - PLM_VOID * pMemoryBlockVirt); -LM_STATUS MM_AllocateSharedMemory (PLM_DEVICE_BLOCK pDevice, - LM_UINT32 BlockSize, - PLM_VOID * pMemoryBlockVirt, - PLM_PHYSICAL_ADDRESS pMemoryBlockPhy, - LM_BOOL Cached); -LM_STATUS MM_GetConfig (PLM_DEVICE_BLOCK pDevice); -LM_STATUS MM_IndicateStatus (PLM_DEVICE_BLOCK pDevice, LM_STATUS Status); -LM_STATUS MM_InitializeUmPackets (PLM_DEVICE_BLOCK pDevice); -LM_STATUS MM_FreeRxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket); -LM_STATUS MM_CoalesceTxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket); -LM_STATUS LM_MbufWorkAround (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_SetLinkSpeed (PLM_DEVICE_BLOCK pDevice, - LM_REQUESTED_MEDIA_TYPE RequestedMediaType); - -#if INCLUDE_5703_A0_FIX -LM_STATUS LM_Load5703DmaWFirmware (PLM_DEVICE_BLOCK pDevice); -#endif - -#endif /* LM_H */ diff --git a/drivers/net/bcm570x_mm.h b/drivers/net/bcm570x_mm.h deleted file mode 100644 index ff5302f47c..0000000000 --- a/drivers/net/bcm570x_mm.h +++ /dev/null @@ -1,158 +0,0 @@ - -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/******************************************************************************/ - -#ifndef MM_H -#define MM_H - -#define __raw_readl readl -#define __raw_writel writel - -#define BIG_ENDIAN_HOST 1 -#define readl(addr) (*(volatile unsigned int*)(addr)) -#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b)) - -/* Define memory barrier function here if needed */ -#define wmb() -#define membar() -#include -#include -#include "bcm570x_lm.h" -#include "bcm570x_queue.h" -#include "tigon3.h" -#include - -#define FALSE 0 -#define TRUE 1 -#define ERROR -1 - -#if DBG -#define STATIC -#else -#define STATIC static -#endif - -extern int MM_Packet_Desc_Size; - -#define MM_PACKET_DESC_SIZE MM_Packet_Desc_Size - -DECLARE_QUEUE_TYPE (UM_RX_PACKET_Q, MAX_RX_PACKET_DESC_COUNT + 1); - -#define MAX_MEM 16 - -/* Synch */ -typedef int mutex_t; -typedef int spinlock_t; - -/* Embedded device control */ -typedef struct _UM_DEVICE_BLOCK { - LM_DEVICE_BLOCK lm_dev; - pci_dev_t pdev; - char *name; - void *mem_list[MAX_MEM]; - dma_addr_t dma_list[MAX_MEM]; - int mem_size_list[MAX_MEM]; - int mem_list_num; - int mtu; - int index; - int opened; - int delayed_link_ind; /* Delay link status during initial load */ - int adapter_just_inited; /* the first few seconds after init. */ - int spurious_int; /* new -- unsupported */ - int timer_interval; - int adaptive_expiry; - int crc_counter_expiry; /* new -- unsupported */ - int poll_tib_expiry; /* new -- unsupported */ - int tx_full; - int tx_queued; - int line_speed; /* in Mbps, 0 if link is down */ - UM_RX_PACKET_Q rx_out_of_buf_q; - int rx_out_of_buf; - int rx_low_buf_thresh; /* changed to rx_buf_repl_thresh */ - int rx_buf_repl_panic_thresh; - int rx_buf_align; /* new -- unsupported */ - int do_global_lock; - mutex_t global_lock; - mutex_t undi_lock; - long undi_flags; - volatile int interrupt; - int tasklet_pending; - int tasklet_busy; /* new -- unsupported */ - int rx_pkt; - int tx_pkt; -#ifdef NICE_SUPPORT /* unsupported, this is a linux ioctl */ - void (*nice_rx) (void *, void *); - void *nice_ctx; -#endif /* NICE_SUPPORT */ - int rx_adaptive_coalesce; - unsigned int rx_last_cnt; - unsigned int tx_last_cnt; - unsigned int rx_curr_coalesce_frames; - unsigned int rx_curr_coalesce_ticks; - unsigned int tx_curr_coalesce_frames; /* new -- unsupported */ -#if TIGON3_DEBUG /* new -- unsupported */ - uint tx_zc_count; - uint tx_chksum_count; - uint tx_himem_count; - uint rx_good_chksum_count; -#endif - unsigned int rx_bad_chksum_count; /* new -- unsupported */ - unsigned int rx_misc_errors; /* new -- unsupported */ -} UM_DEVICE_BLOCK, *PUM_DEVICE_BLOCK; - -/* Physical/PCI DMA address */ -typedef union { - dma_addr_t dma_map; -} dma_map_t; - -/* Packet */ -typedef struct - _UM_PACKET { - LM_PACKET lm_packet; - void *skbuff; /* Address of packet buffer */ -} UM_PACKET, *PUM_PACKET; - -#define MM_ACQUIRE_UNDI_LOCK(_pDevice) -#define MM_RELEASE_UNDI_LOCK(_pDevice) -#define MM_ACQUIRE_INT_LOCK(_pDevice) -#define MM_RELEASE_INT_LOCK(_pDevice) -#define MM_UINT_PTR(_ptr) ((unsigned long) (_ptr)) - -/* Macro for setting 64bit address struct */ -#define set_64bit_addr(paddr, low, high) \ - (paddr)->Low = low; \ - (paddr)->High = high; - -/* Assume that PCI controller's view of host memory is same as host */ - -#define MEM_TO_PCI_PHYS(addr) (addr) - -extern void MM_SetAddr (LM_PHYSICAL_ADDRESS * paddr, dma_addr_t addr); -extern void MM_SetT3Addr (T3_64BIT_HOST_ADDR * paddr, dma_addr_t addr); -extern void MM_MapTxDma (PLM_DEVICE_BLOCK pDevice, - struct _LM_PACKET *pPacket, T3_64BIT_HOST_ADDR * paddr, - LM_UINT32 * len, int frag); -extern void MM_MapRxDma (PLM_DEVICE_BLOCK pDevice, - struct _LM_PACKET *pPacket, - T3_64BIT_HOST_ADDR * paddr); - -/* BSP needs to provide sysUsecDelay and sysSerialPrintString */ -extern void sysSerialPrintString (char *s); -#define MM_Wait(usec) udelay(usec) - -/* Define memory barrier function here if needed */ -#define wmb() - -#if 0 -#define cpu_to_le32(val) LONGSWAP(val) -#endif -#endif /* MM_H */ diff --git a/drivers/net/bcm570x_queue.h b/drivers/net/bcm570x_queue.h deleted file mode 100644 index 336b3caa4a..0000000000 --- a/drivers/net/bcm570x_queue.h +++ /dev/null @@ -1,387 +0,0 @@ - -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* Queue functions. */ -/* void QQ_InitQueue(PQQ_CONTAINER pQueue) */ -/* char QQ_Full(PQQ_CONTAINER pQueue) */ -/* char QQ_Empty(PQQ_CONTAINER pQueue) */ -/* unsigned int QQ_GetSize(PQQ_CONTAINER pQueue) */ -/* unsigned int QQ_GetEntryCnt(PQQ_CONTAINER pQueue) */ -/* char QQ_PushHead(PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry) */ -/* char QQ_PushTail(PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry) */ -/* PQQ_ENTRY QQ_PopHead(PQQ_CONTAINER pQueue) */ -/* PQQ_ENTRY QQ_PopTail(PQQ_CONTAINER pQueue) */ -/* PQQ_ENTRY QQ_GetHead(PQQ_CONTAINER pQueue, unsigned int Idx) */ -/* PQQ_ENTRY QQ_GetTail(PQQ_CONTAINER pQueue, unsigned int Idx) */ -/* */ -/* */ -/* History: */ -/* 02/25/00 Hav Khauv Initial version. */ -/******************************************************************************/ - -#ifndef BCM_QUEUE_H -#define BCM_QUEUE_H -#ifndef EMBEDDED -#define EMBEDDED 1 -#endif - -/******************************************************************************/ -/* Queue definitions. */ -/******************************************************************************/ - -/* Entry for queueing. */ -typedef void *PQQ_ENTRY; - -/* Linux Atomic Ops support */ -typedef struct { int counter; } atomic_t; - - -/* - * This combination of `inline' and `extern' has almost the effect of a - * macro. The way to use it is to put a function definition in a header - * file with these keywords, and put another copy of the definition - * (lacking `inline' and `extern') in a library file. The definition in - * the header file will cause most calls to the function to be inlined. - * If any uses of the function remain, they will refer to the single copy - * in the library. - */ -extern __inline void -atomic_set(atomic_t* entry, int val) -{ - entry->counter = val; -} -extern __inline int -atomic_read(atomic_t* entry) -{ - return entry->counter; -} -extern __inline void -atomic_inc(atomic_t* entry) -{ - if(entry) - entry->counter++; -} - -extern __inline void -atomic_dec(atomic_t* entry) -{ - if(entry) - entry->counter--; -} - -extern __inline void -atomic_sub(int a, atomic_t* entry) -{ - if(entry) - entry->counter -= a; -} -extern __inline void -atomic_add(int a, atomic_t* entry) -{ - if(entry) - entry->counter += a; -} - - -/* Queue header -- base type. */ -typedef struct { - unsigned int Head; - unsigned int Tail; - unsigned int Size; - atomic_t EntryCnt; - PQQ_ENTRY Array[1]; -} QQ_CONTAINER, *PQQ_CONTAINER; - - -/* Declare queue type macro. */ -#define DECLARE_QUEUE_TYPE(_QUEUE_TYPE, _QUEUE_SIZE) \ - \ - typedef struct { \ - QQ_CONTAINER Container; \ - PQQ_ENTRY EntryBuffer[_QUEUE_SIZE]; \ - } _QUEUE_TYPE, *P##_QUEUE_TYPE - - -/******************************************************************************/ -/* Compilation switches. */ -/******************************************************************************/ - -#if DBG -#undef QQ_NO_OVERFLOW_CHECK -#undef QQ_NO_UNDERFLOW_CHECK -#endif /* DBG */ - -#ifdef QQ_USE_MACROS -/* notdone */ -#else - -#ifdef QQ_NO_INLINE -#define __inline -#endif /* QQ_NO_INLINE */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -extern __inline void -QQ_InitQueue( -PQQ_CONTAINER pQueue, -unsigned int QueueSize) { - pQueue->Head = 0; - pQueue->Tail = 0; - pQueue->Size = QueueSize+1; - atomic_set(&pQueue->EntryCnt, 0); -} /* QQ_InitQueue */ - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -extern __inline char -QQ_Full( -PQQ_CONTAINER pQueue) { - unsigned int NewHead; - - NewHead = (pQueue->Head + 1) % pQueue->Size; - - return(NewHead == pQueue->Tail); -} /* QQ_Full */ - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -extern __inline char -QQ_Empty( -PQQ_CONTAINER pQueue) { - return(pQueue->Head == pQueue->Tail); -} /* QQ_Empty */ - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -extern __inline unsigned int -QQ_GetSize( -PQQ_CONTAINER pQueue) { - return pQueue->Size; -} /* QQ_GetSize */ - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -extern __inline unsigned int -QQ_GetEntryCnt( -PQQ_CONTAINER pQueue) { - return atomic_read(&pQueue->EntryCnt); -} /* QQ_GetEntryCnt */ - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/* TRUE entry was added successfully. */ -/* FALSE queue is full. */ -/******************************************************************************/ -extern __inline char -QQ_PushHead( -PQQ_CONTAINER pQueue, -PQQ_ENTRY pEntry) { - unsigned int Head; - - Head = (pQueue->Head + 1) % pQueue->Size; - -#if !defined(QQ_NO_OVERFLOW_CHECK) - if(Head == pQueue->Tail) { - return 0; - } /* if */ -#endif /* QQ_NO_OVERFLOW_CHECK */ - - pQueue->Array[pQueue->Head] = pEntry; - wmb(); - pQueue->Head = Head; - atomic_inc(&pQueue->EntryCnt); - - return -1; -} /* QQ_PushHead */ - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/* TRUE entry was added successfully. */ -/* FALSE queue is full. */ -/******************************************************************************/ -extern __inline char -QQ_PushTail( -PQQ_CONTAINER pQueue, -PQQ_ENTRY pEntry) { - unsigned int Tail; - - Tail = pQueue->Tail; - if(Tail == 0) { - Tail = pQueue->Size; - } /* if */ - Tail--; - -#if !defined(QQ_NO_OVERFLOW_CHECK) - if(Tail == pQueue->Head) { - return 0; - } /* if */ -#endif /* QQ_NO_OVERFLOW_CHECK */ - - pQueue->Array[Tail] = pEntry; - wmb(); - pQueue->Tail = Tail; - atomic_inc(&pQueue->EntryCnt); - - return -1; -} /* QQ_PushTail */ - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -extern __inline PQQ_ENTRY -QQ_PopHead( -PQQ_CONTAINER pQueue) { - unsigned int Head; - PQQ_ENTRY Entry; - - Head = pQueue->Head; - -#if !defined(QQ_NO_UNDERFLOW_CHECK) - if(Head == pQueue->Tail) { - return (PQQ_ENTRY) 0; - } /* if */ -#endif /* QQ_NO_UNDERFLOW_CHECK */ - - if(Head == 0) { - Head = pQueue->Size; - } /* if */ - Head--; - - Entry = pQueue->Array[Head]; -#ifdef EMBEDDED - membar(); -#else - mb(); -#endif - pQueue->Head = Head; - atomic_dec(&pQueue->EntryCnt); - - return Entry; -} /* QQ_PopHead */ - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -extern __inline PQQ_ENTRY -QQ_PopTail( -PQQ_CONTAINER pQueue) { - unsigned int Tail; - PQQ_ENTRY Entry; - - Tail = pQueue->Tail; - -#if !defined(QQ_NO_UNDERFLOW_CHECK) - if(Tail == pQueue->Head) { - return (PQQ_ENTRY) 0; - } /* if */ -#endif /* QQ_NO_UNDERFLOW_CHECK */ - - Entry = pQueue->Array[Tail]; -#ifdef EMBEDDED - membar(); -#else - mb(); -#endif - pQueue->Tail = (Tail + 1) % pQueue->Size; - atomic_dec(&pQueue->EntryCnt); - - return Entry; -} /* QQ_PopTail */ - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -extern __inline PQQ_ENTRY -QQ_GetHead( - PQQ_CONTAINER pQueue, - unsigned int Idx) -{ - if(Idx >= atomic_read(&pQueue->EntryCnt)) - { - return (PQQ_ENTRY) 0; - } - - if(pQueue->Head > Idx) - { - Idx = pQueue->Head - Idx; - } - else - { - Idx = pQueue->Size - (Idx - pQueue->Head); - } - Idx--; - - return pQueue->Array[Idx]; -} - - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -extern __inline PQQ_ENTRY -QQ_GetTail( - PQQ_CONTAINER pQueue, - unsigned int Idx) -{ - if(Idx >= atomic_read(&pQueue->EntryCnt)) - { - return (PQQ_ENTRY) 0; - } - - Idx += pQueue->Tail; - if(Idx >= pQueue->Size) - { - Idx = Idx - pQueue->Size; - } - - return pQueue->Array[Idx]; -} - -#endif /* QQ_USE_MACROS */ - - -#endif /* QUEUE_H */ diff --git a/drivers/net/tigon3.c b/drivers/net/tigon3.c deleted file mode 100644 index 33cb447b1e..0000000000 --- a/drivers/net/tigon3.c +++ /dev/null @@ -1,5697 +0,0 @@ -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* History: */ -/******************************************************************************/ -#include -#include - -#ifdef CONFIG_BMW -#include -#endif -#include -#include -#include "bcm570x_mm.h" - -#define EMBEDDED 1 -/******************************************************************************/ -/* Local functions. */ -/******************************************************************************/ - -LM_STATUS LM_Abort (PLM_DEVICE_BLOCK pDevice); -LM_STATUS LM_QueueRxPackets (PLM_DEVICE_BLOCK pDevice); - -static LM_STATUS LM_TranslateRequestedMediaType (LM_REQUESTED_MEDIA_TYPE - RequestedMediaType, - PLM_MEDIA_TYPE pMediaType, - PLM_LINE_SPEED pLineSpeed, - PLM_DUPLEX_MODE pDuplexMode); - -static LM_STATUS LM_InitBcm540xPhy (PLM_DEVICE_BLOCK pDevice); - -__inline static LM_VOID LM_ServiceRxInterrupt (PLM_DEVICE_BLOCK pDevice); -__inline static LM_VOID LM_ServiceTxInterrupt (PLM_DEVICE_BLOCK pDevice); - -static LM_STATUS LM_ForceAutoNegBcm540xPhy (PLM_DEVICE_BLOCK pDevice, - LM_REQUESTED_MEDIA_TYPE - RequestedMediaType); -static LM_STATUS LM_ForceAutoNeg (PLM_DEVICE_BLOCK pDevice, - LM_REQUESTED_MEDIA_TYPE RequestedMediaType); -static LM_UINT32 GetPhyAdFlowCntrlSettings (PLM_DEVICE_BLOCK pDevice); -STATIC LM_STATUS LM_SetFlowControl (PLM_DEVICE_BLOCK pDevice, - LM_UINT32 LocalPhyAd, - LM_UINT32 RemotePhyAd); -#if INCLUDE_TBI_SUPPORT -STATIC LM_STATUS LM_SetupFiberPhy (PLM_DEVICE_BLOCK pDevice); -STATIC LM_STATUS LM_InitBcm800xPhy (PLM_DEVICE_BLOCK pDevice); -#endif -STATIC LM_STATUS LM_SetupCopperPhy (PLM_DEVICE_BLOCK pDevice); -STATIC PLM_ADAPTER_INFO LM_GetAdapterInfoBySsid (LM_UINT16 Svid, - LM_UINT16 Ssid); -STATIC LM_STATUS LM_DmaTest (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt, - LM_PHYSICAL_ADDRESS BufferPhy, - LM_UINT32 BufferSize); -STATIC LM_STATUS LM_HaltCpu (PLM_DEVICE_BLOCK pDevice, LM_UINT32 cpu_number); -STATIC LM_STATUS LM_ResetChip (PLM_DEVICE_BLOCK pDevice); -STATIC LM_STATUS LM_Test4GBoundary (PLM_DEVICE_BLOCK pDevice, - PLM_PACKET pPacket, PT3_SND_BD pSendBd); - -/******************************************************************************/ -/* External functions. */ -/******************************************************************************/ - -LM_STATUS LM_LoadRlsFirmware (PLM_DEVICE_BLOCK pDevice); - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_UINT32 LM_RegRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register) -{ - LM_UINT32 Value32; - -#if PCIX_TARGET_WORKAROUND - MM_ACQUIRE_UNDI_LOCK (pDevice); -#endif - MM_WriteConfig32 (pDevice, T3_PCI_REG_ADDR_REG, Register); - MM_ReadConfig32 (pDevice, T3_PCI_REG_DATA_REG, &Value32); -#if PCIX_TARGET_WORKAROUND - MM_RELEASE_UNDI_LOCK (pDevice); -#endif - - return Value32; -} /* LM_RegRdInd */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_VOID -LM_RegWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register, LM_UINT32 Value32) -{ - -#if PCIX_TARGET_WORKAROUND - MM_ACQUIRE_UNDI_LOCK (pDevice); -#endif - MM_WriteConfig32 (pDevice, T3_PCI_REG_ADDR_REG, Register); - MM_WriteConfig32 (pDevice, T3_PCI_REG_DATA_REG, Value32); -#if PCIX_TARGET_WORKAROUND - MM_RELEASE_UNDI_LOCK (pDevice); -#endif -} /* LM_RegWrInd */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_UINT32 LM_MemRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr) -{ - LM_UINT32 Value32; - - MM_ACQUIRE_UNDI_LOCK (pDevice); -#ifdef BIG_ENDIAN_HOST - MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr); - Value32 = REG_RD (pDevice, PciCfg.MemWindowData); - /* Value32 = REG_RD(pDevice,uIntMem.Mbuf[(MemAddr & 0x7fff)/4]); */ -#else - MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr); - MM_ReadConfig32 (pDevice, T3_PCI_MEM_WIN_DATA_REG, &Value32); -#endif - MM_RELEASE_UNDI_LOCK (pDevice); - - return Value32; -} /* LM_MemRdInd */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_VOID -LM_MemWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr, LM_UINT32 Value32) -{ - MM_ACQUIRE_UNDI_LOCK (pDevice); -#ifdef BIG_ENDIAN_HOST - REG_WR (pDevice, PciCfg.MemWindowBaseAddr, MemAddr); - REG_WR (pDevice, uIntMem.Mbuf[(MemAddr & 0x7fff) / 4], Value32); -#else - MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr); - MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_DATA_REG, Value32); -#endif - MM_RELEASE_UNDI_LOCK (pDevice); -} /* LM_MemWrInd */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS LM_QueueRxPackets (PLM_DEVICE_BLOCK pDevice) -{ - LM_STATUS Lmstatus; - PLM_PACKET pPacket; - PT3_RCV_BD pRcvBd; - LM_UINT32 StdBdAdded = 0; -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - LM_UINT32 JumboBdAdded = 0; -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - Lmstatus = LM_STATUS_SUCCESS; - - pPacket = (PLM_PACKET) QQ_PopHead (&pDevice->RxPacketFreeQ.Container); - while (pPacket) { - switch (pPacket->u.Rx.RcvProdRing) { -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - case T3_JUMBO_RCV_PROD_RING: /* Jumbo Receive Ring. */ - /* Initialize the buffer descriptor. */ - pRcvBd = - &pDevice->pRxJumboBdVirt[pDevice->RxJumboProdIdx]; - pRcvBd->Flags = - RCV_BD_FLAG_END | RCV_BD_FLAG_JUMBO_RING; - pRcvBd->Len = (LM_UINT16) pDevice->RxJumboBufferSize; - - /* Initialize the receive buffer pointer */ -#if 0 /* Jimmy, deleted in new */ - pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low; - pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High; -#endif - MM_MapRxDma (pDevice, pPacket, &pRcvBd->HostAddr); - - /* The opaque field may point to an offset from a fix addr. */ - pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR (pPacket) - - MM_UINT_PTR (pDevice-> - pPacketDescBase)); - - /* Update the producer index. */ - pDevice->RxJumboProdIdx = - (pDevice->RxJumboProdIdx + - 1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK; - - JumboBdAdded++; - break; -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - case T3_STD_RCV_PROD_RING: /* Standard Receive Ring. */ - /* Initialize the buffer descriptor. */ - pRcvBd = &pDevice->pRxStdBdVirt[pDevice->RxStdProdIdx]; - pRcvBd->Flags = RCV_BD_FLAG_END; - pRcvBd->Len = MAX_STD_RCV_BUFFER_SIZE; - - /* Initialize the receive buffer pointer */ -#if 0 /* Jimmy, deleted in new replaced with MM_MapRxDma */ - pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low; - pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High; -#endif - MM_MapRxDma (pDevice, pPacket, &pRcvBd->HostAddr); - - /* The opaque field may point to an offset from a fix addr. */ - pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR (pPacket) - - MM_UINT_PTR (pDevice-> - pPacketDescBase)); - - /* Update the producer index. */ - pDevice->RxStdProdIdx = (pDevice->RxStdProdIdx + 1) & - T3_STD_RCV_RCB_ENTRY_COUNT_MASK; - - StdBdAdded++; - break; - - case T3_UNKNOWN_RCV_PROD_RING: - default: - Lmstatus = LM_STATUS_FAILURE; - break; - } /* switch */ - - /* Bail out if there is any error. */ - if (Lmstatus != LM_STATUS_SUCCESS) { - break; - } - - pPacket = - (PLM_PACKET) QQ_PopHead (&pDevice->RxPacketFreeQ.Container); - } /* while */ - - wmb (); - /* Update the procedure index. */ - if (StdBdAdded) { - MB_REG_WR (pDevice, Mailbox.RcvStdProdIdx.Low, - pDevice->RxStdProdIdx); - } -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - if (JumboBdAdded) { - MB_REG_WR (pDevice, Mailbox.RcvJumboProdIdx.Low, - pDevice->RxJumboProdIdx); - } -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - return Lmstatus; -} /* LM_QueueRxPackets */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -STATIC LM_VOID LM_NvramInit (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 Value32; - LM_UINT32 j; - - /* Intialize clock period and state machine. */ - Value32 = SEEPROM_ADDR_CLK_PERD (SEEPROM_CLOCK_PERIOD) | - SEEPROM_ADDR_FSM_RESET; - REG_WR (pDevice, Grc.EepromAddr, Value32); - - for (j = 0; j < 100; j++) { - MM_Wait (10); - } - - /* Serial eeprom access using the Grc.EepromAddr/EepromData registers. */ - Value32 = REG_RD (pDevice, Grc.LocalCtrl); - REG_WR (pDevice, Grc.LocalCtrl, - Value32 | GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM); - - /* Set the 5701 compatibility mode if we are using EEPROM. */ - if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 && - T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5701) { - Value32 = REG_RD (pDevice, Nvram.Config1); - if ((Value32 & FLASH_INTERFACE_ENABLE) == 0) { - /* Use the new interface to read EEPROM. */ - Value32 &= ~FLASH_COMPAT_BYPASS; - - REG_WR (pDevice, Nvram.Config1, Value32); - } - } -} /* LM_NvRamInit */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -STATIC LM_STATUS -LM_EepromRead (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT32 * pData) -{ - LM_UINT32 Value32; - LM_UINT32 Addr; - LM_UINT32 Dev; - LM_UINT32 j; - - if (Offset > SEEPROM_CHIP_SIZE) { - return LM_STATUS_FAILURE; - } - - Dev = Offset / SEEPROM_CHIP_SIZE; - Addr = Offset % SEEPROM_CHIP_SIZE; - - Value32 = REG_RD (pDevice, Grc.EepromAddr); - Value32 &= ~(SEEPROM_ADDR_ADDRESS_MASK | SEEPROM_ADDR_DEV_ID_MASK | - SEEPROM_ADDR_RW_MASK); - REG_WR (pDevice, Grc.EepromAddr, Value32 | SEEPROM_ADDR_DEV_ID (Dev) | - SEEPROM_ADDR_ADDRESS (Addr) | SEEPROM_ADDR_START | - SEEPROM_ADDR_READ); - - for (j = 0; j < 1000; j++) { - Value32 = REG_RD (pDevice, Grc.EepromAddr); - if (Value32 & SEEPROM_ADDR_COMPLETE) { - break; - } - MM_Wait (10); - } - - if (Value32 & SEEPROM_ADDR_COMPLETE) { - Value32 = REG_RD (pDevice, Grc.EepromData); - *pData = Value32; - - return LM_STATUS_SUCCESS; - } - - return LM_STATUS_FAILURE; -} /* LM_EepromRead */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -STATIC LM_STATUS -LM_NvramRead (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT32 * pData) -{ - LM_UINT32 Value32; - LM_STATUS Status; - LM_UINT32 j; - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Status = LM_EepromRead (pDevice, Offset, pData); - } else { - /* Determine if we have flash or EEPROM. */ - Value32 = REG_RD (pDevice, Nvram.Config1); - if (Value32 & FLASH_INTERFACE_ENABLE) { - if (Value32 & FLASH_SSRAM_BUFFERRED_MODE) { - Offset = ((Offset / BUFFERED_FLASH_PAGE_SIZE) << - BUFFERED_FLASH_PAGE_POS) + - (Offset % BUFFERED_FLASH_PAGE_SIZE); - } - } - - REG_WR (pDevice, Nvram.SwArb, SW_ARB_REQ_SET1); - for (j = 0; j < 1000; j++) { - if (REG_RD (pDevice, Nvram.SwArb) & SW_ARB_GNT1) { - break; - } - MM_Wait (20); - } - if (j == 1000) { - return LM_STATUS_FAILURE; - } - - /* Read from flash or EEPROM with the new 5703/02 interface. */ - REG_WR (pDevice, Nvram.Addr, Offset & NVRAM_ADDRESS_MASK); - - REG_WR (pDevice, Nvram.Cmd, NVRAM_CMD_RD | NVRAM_CMD_DO_IT | - NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE); - - /* Wait for the done bit to clear. */ - for (j = 0; j < 500; j++) { - MM_Wait (10); - - Value32 = REG_RD (pDevice, Nvram.Cmd); - if (!(Value32 & NVRAM_CMD_DONE)) { - break; - } - } - - /* Wait for the done bit. */ - if (!(Value32 & NVRAM_CMD_DONE)) { - for (j = 0; j < 500; j++) { - MM_Wait (10); - - Value32 = REG_RD (pDevice, Nvram.Cmd); - if (Value32 & NVRAM_CMD_DONE) { - MM_Wait (10); - - *pData = - REG_RD (pDevice, Nvram.ReadData); - - /* Change the endianess. */ - *pData = - ((*pData & 0xff) << 24) | - ((*pData & 0xff00) << 8) | - ((*pData & 0xff0000) >> 8) | - ((*pData >> 24) & 0xff); - - break; - } - } - } - - REG_WR (pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1); - if (Value32 & NVRAM_CMD_DONE) { - Status = LM_STATUS_SUCCESS; - } else { - Status = LM_STATUS_FAILURE; - } - } - - return Status; -} /* LM_NvramRead */ - -STATIC void LM_ReadVPD (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 Vpd_arr[256 / 4]; - LM_UINT8 *Vpd = (LM_UINT8 *) & Vpd_arr[0]; - LM_UINT32 *Vpd_dptr = &Vpd_arr[0]; - LM_UINT32 Value32; - unsigned int j; - - /* Read PN from VPD */ - for (j = 0; j < 256; j += 4, Vpd_dptr++) { - if (LM_NvramRead (pDevice, 0x100 + j, &Value32) != - LM_STATUS_SUCCESS) { - printf ("BCM570x: LM_ReadVPD: VPD read failed" - " (no EEPROM onboard)\n"); - return; - } - *Vpd_dptr = cpu_to_le32 (Value32); - } - for (j = 0; j < 256;) { - unsigned int Vpd_r_len; - unsigned int Vpd_r_end; - - if ((Vpd[j] == 0x82) || (Vpd[j] == 0x91)) { - j = j + 3 + Vpd[j + 1] + (Vpd[j + 2] << 8); - } else if (Vpd[j] == 0x90) { - Vpd_r_len = Vpd[j + 1] + (Vpd[j + 2] << 8); - j += 3; - Vpd_r_end = Vpd_r_len + j; - while (j < Vpd_r_end) { - if ((Vpd[j] == 'P') && (Vpd[j + 1] == 'N')) { - unsigned int len = Vpd[j + 2]; - - if (len <= 24) { - memcpy (pDevice->PartNo, - &Vpd[j + 3], len); - } - break; - } else { - if (Vpd[j + 2] == 0) { - break; - } - j = j + Vpd[j + 2]; - } - } - break; - } else { - break; - } - } -} - -STATIC void LM_ReadBootCodeVersion (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 Value32, offset, ver_offset; - int i; - - if (LM_NvramRead (pDevice, 0x0, &Value32) != LM_STATUS_SUCCESS) - return; - if (Value32 != 0xaa559966) - return; - if (LM_NvramRead (pDevice, 0xc, &offset) != LM_STATUS_SUCCESS) - return; - - offset = ((offset & 0xff) << 24) | ((offset & 0xff00) << 8) | - ((offset & 0xff0000) >> 8) | ((offset >> 24) & 0xff); - if (LM_NvramRead (pDevice, offset, &Value32) != LM_STATUS_SUCCESS) - return; - if ((Value32 == 0x0300000e) && - (LM_NvramRead (pDevice, offset + 4, &Value32) == LM_STATUS_SUCCESS) - && (Value32 == 0)) { - - if (LM_NvramRead (pDevice, offset + 8, &ver_offset) != - LM_STATUS_SUCCESS) - return; - ver_offset = ((ver_offset & 0xff0000) >> 8) | - ((ver_offset >> 24) & 0xff); - for (i = 0; i < 16; i += 4) { - if (LM_NvramRead - (pDevice, offset + ver_offset + i, - &Value32) != LM_STATUS_SUCCESS) { - return; - } - *((LM_UINT32 *) & pDevice->BootCodeVer[i]) = - cpu_to_le32 (Value32); - } - } else { - char c; - - if (LM_NvramRead (pDevice, 0x94, &Value32) != LM_STATUS_SUCCESS) - return; - - i = 0; - c = ((Value32 & 0xff0000) >> 16); - - if (c < 10) { - pDevice->BootCodeVer[i++] = c + '0'; - } else { - pDevice->BootCodeVer[i++] = (c / 10) + '0'; - pDevice->BootCodeVer[i++] = (c % 10) + '0'; - } - pDevice->BootCodeVer[i++] = '.'; - c = (Value32 & 0xff000000) >> 24; - if (c < 10) { - pDevice->BootCodeVer[i++] = c + '0'; - } else { - pDevice->BootCodeVer[i++] = (c / 10) + '0'; - pDevice->BootCodeVer[i++] = (c % 10) + '0'; - } - pDevice->BootCodeVer[i] = 0; - } -} - -STATIC void LM_GetBusSpeed (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 PciState = pDevice->PciState; - LM_UINT32 ClockCtrl; - char *SpeedStr = ""; - - if (PciState & T3_PCI_STATE_32BIT_PCI_BUS) { - strcpy (pDevice->BusSpeedStr, "32-bit "); - } else { - strcpy (pDevice->BusSpeedStr, "64-bit "); - } - if (PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) { - strcat (pDevice->BusSpeedStr, "PCI "); - if (PciState & T3_PCI_STATE_HIGH_BUS_SPEED) { - SpeedStr = "66MHz"; - } else { - SpeedStr = "33MHz"; - } - } else { - strcat (pDevice->BusSpeedStr, "PCIX "); - if (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE) { - SpeedStr = "133MHz"; - } else { - ClockCtrl = REG_RD (pDevice, PciCfg.ClockCtrl) & 0x1f; - switch (ClockCtrl) { - case 0: - SpeedStr = "33MHz"; - break; - - case 2: - SpeedStr = "50MHz"; - break; - - case 4: - SpeedStr = "66MHz"; - break; - - case 6: - SpeedStr = "100MHz"; - break; - - case 7: - SpeedStr = "133MHz"; - break; - } - } - } - strcat (pDevice->BusSpeedStr, SpeedStr); -} - -/******************************************************************************/ -/* Description: */ -/* This routine initializes default parameters and reads the PCI */ -/* configurations. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS LM_GetAdapterInfo (PLM_DEVICE_BLOCK pDevice) -{ - PLM_ADAPTER_INFO pAdapterInfo; - LM_UINT32 Value32; - LM_STATUS Status; - LM_UINT32 j; - LM_UINT32 EeSigFound; - LM_UINT32 EePhyTypeSerdes = 0; - LM_UINT32 EePhyLedMode = 0; - LM_UINT32 EePhyId = 0; - - /* Get Device Id and Vendor Id */ - Status = MM_ReadConfig32 (pDevice, PCI_VENDOR_ID_REG, &Value32); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - pDevice->PciVendorId = (LM_UINT16) Value32; - pDevice->PciDeviceId = (LM_UINT16) (Value32 >> 16); - - /* If we are not getting the write adapter, exit. */ - if ((Value32 != T3_PCI_ID_BCM5700) && - (Value32 != T3_PCI_ID_BCM5701) && - (Value32 != T3_PCI_ID_BCM5702) && - (Value32 != T3_PCI_ID_BCM5702x) && - (Value32 != T3_PCI_ID_BCM5702FE) && - (Value32 != T3_PCI_ID_BCM5703) && - (Value32 != T3_PCI_ID_BCM5703x) && (Value32 != T3_PCI_ID_BCM5704)) { - return LM_STATUS_FAILURE; - } - - Status = MM_ReadConfig32 (pDevice, PCI_REV_ID_REG, &Value32); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - pDevice->PciRevId = (LM_UINT8) Value32; - - /* Get IRQ. */ - Status = MM_ReadConfig32 (pDevice, PCI_INT_LINE_REG, &Value32); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - pDevice->Irq = (LM_UINT8) Value32; - - /* Get interrupt pin. */ - pDevice->IntPin = (LM_UINT8) (Value32 >> 8); - - /* Get chip revision id. */ - Status = MM_ReadConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG, &Value32); - pDevice->ChipRevId = Value32 >> 16; - - /* Get subsystem vendor. */ - Status = - MM_ReadConfig32 (pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, &Value32); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - pDevice->SubsystemVendorId = (LM_UINT16) Value32; - - /* Get PCI subsystem id. */ - pDevice->SubsystemId = (LM_UINT16) (Value32 >> 16); - - /* Get the cache line size. */ - MM_ReadConfig32 (pDevice, PCI_CACHE_LINE_SIZE_REG, &Value32); - pDevice->CacheLineSize = (LM_UINT8) Value32; - pDevice->SavedCacheLineReg = Value32; - - if (pDevice->ChipRevId != T3_CHIP_ID_5703_A1 && - pDevice->ChipRevId != T3_CHIP_ID_5703_A2 && - pDevice->ChipRevId != T3_CHIP_ID_5704_A0) { - pDevice->UndiFix = FALSE; - } -#if !PCIX_TARGET_WORKAROUND - pDevice->UndiFix = FALSE; -#endif - /* Map the memory base to system address space. */ - if (!pDevice->UndiFix) { - Status = MM_MapMemBase (pDevice); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - /* Initialize the memory view pointer. */ - pDevice->pMemView = (PT3_STD_MEM_MAP) pDevice->pMappedMemBase; - } -#if PCIX_TARGET_WORKAROUND - /* store whether we are in PCI are PCI-X mode */ - pDevice->EnablePciXFix = FALSE; - - MM_ReadConfig32 (pDevice, T3_PCI_STATE_REG, &Value32); - if ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0) { - /* Enable PCI-X workaround only if we are running on 5700 BX. */ - if (T3_CHIP_REV (pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) { - pDevice->EnablePciXFix = TRUE; - } - } - if (pDevice->UndiFix) { - pDevice->EnablePciXFix = TRUE; - } -#endif - /* Bx bug: due to the "byte_enable bug" in PCI-X mode, the power */ - /* management register may be clobbered which may cause the */ - /* BCM5700 to go into D3 state. While in this state, we will */ - /* not have memory mapped register access. As a workaround, we */ - /* need to restore the device to D0 state. */ - MM_ReadConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, &Value32); - Value32 |= T3_PM_PME_ASSERTED; - Value32 &= ~T3_PM_POWER_STATE_MASK; - Value32 |= T3_PM_POWER_STATE_D0; - MM_WriteConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, Value32); - - /* read the current PCI command word */ - MM_ReadConfig32 (pDevice, PCI_COMMAND_REG, &Value32); - - /* Make sure bus-mastering is enabled. */ - Value32 |= PCI_BUSMASTER_ENABLE; - -#if PCIX_TARGET_WORKAROUND - /* if we are in PCI-X mode, also make sure mem-mapping and SERR#/PERR# - are enabled */ - if (pDevice->EnablePciXFix == TRUE) { - Value32 |= (PCI_MEM_SPACE_ENABLE | PCI_SYSTEM_ERROR_ENABLE | - PCI_PARITY_ERROR_ENABLE); - } - if (pDevice->UndiFix) { - Value32 &= ~PCI_MEM_SPACE_ENABLE; - } -#endif - - if (pDevice->EnableMWI) { - Value32 |= PCI_MEMORY_WRITE_INVALIDATE; - } else { - Value32 &= (~PCI_MEMORY_WRITE_INVALIDATE); - } - - /* Error out if mem-mapping is NOT enabled for PCI systems */ - if (!(Value32 | PCI_MEM_SPACE_ENABLE)) { - return LM_STATUS_FAILURE; - } - - /* save the value we are going to write into the PCI command word */ - pDevice->PciCommandStatusWords = Value32; - - Status = MM_WriteConfig32 (pDevice, PCI_COMMAND_REG, Value32); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - - /* Set power state to D0. */ - LM_SetPowerState (pDevice, LM_POWER_STATE_D0); - -#ifdef BIG_ENDIAN_PCI - pDevice->MiscHostCtrl = - MISC_HOST_CTRL_MASK_PCI_INT | - MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS | - MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP | - MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW; -#else /* No CPU Swap modes for PCI IO */ - - /* Setup the mode registers. */ - pDevice->MiscHostCtrl = - MISC_HOST_CTRL_MASK_PCI_INT | - MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP | -#ifdef BIG_ENDIAN_HOST - MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP | -#endif /* BIG_ENDIAN_HOST */ - MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS | - MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW; -#endif /* !BIG_ENDIAN_PCI */ - - /* write to PCI misc host ctr first in order to enable indirect accesses */ - MM_WriteConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG, - pDevice->MiscHostCtrl); - - REG_WR (pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl); - -#ifdef BIG_ENDIAN_PCI - Value32 = GRC_MODE_WORD_SWAP_DATA | GRC_MODE_WORD_SWAP_NON_FRAME_DATA; -#else -/* No CPU Swap modes for PCI IO */ -#ifdef BIG_ENDIAN_HOST - Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | - GRC_MODE_WORD_SWAP_NON_FRAME_DATA; -#else - Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA; -#endif -#endif /* !BIG_ENDIAN_PCI */ - - REG_WR (pDevice, Grc.Mode, Value32); - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - REG_WR (pDevice, Grc.LocalCtrl, - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1); - } - MM_Wait (40); - - /* Enable indirect memory access */ - REG_WR (pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE); - - if (REG_RD (pDevice, PciCfg.ClockCtrl) & T3_PCI_44MHZ_CORE_CLOCK) { - REG_WR (pDevice, PciCfg.ClockCtrl, T3_PCI_44MHZ_CORE_CLOCK | - T3_PCI_SELECT_ALTERNATE_CLOCK); - REG_WR (pDevice, PciCfg.ClockCtrl, - T3_PCI_SELECT_ALTERNATE_CLOCK); - MM_Wait (40); /* required delay is 27usec */ - } - REG_WR (pDevice, PciCfg.ClockCtrl, 0); - REG_WR (pDevice, PciCfg.MemWindowBaseAddr, 0); - -#if PCIX_TARGET_WORKAROUND - MM_ReadConfig32 (pDevice, T3_PCI_STATE_REG, &Value32); - if ((pDevice->EnablePciXFix == FALSE) && - ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0)) { - if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B2 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B5) { - __raw_writel (0, - &(pDevice->pMemView->uIntMem. - MemBlock32K[0x300])); - __raw_writel (0, - &(pDevice->pMemView->uIntMem. - MemBlock32K[0x301])); - __raw_writel (0xffffffff, - &(pDevice->pMemView->uIntMem. - MemBlock32K[0x301])); - if (__raw_readl - (&(pDevice->pMemView->uIntMem.MemBlock32K[0x300]))) - { - pDevice->EnablePciXFix = TRUE; - } - } - } -#endif -#if 1 - /* - * This code was at the beginning of else block below, but that's - * a bug if node address in shared memory. - */ - MM_Wait (50); - LM_NvramInit (pDevice); -#endif - /* Get the node address. First try to get in from the shared memory. */ - /* If the signature is not present, then get it from the NVRAM. */ - Value32 = MEM_RD_OFFSET (pDevice, T3_MAC_ADDR_HIGH_MAILBOX); - if ((Value32 >> 16) == 0x484b) { - - pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 8); - pDevice->NodeAddress[1] = (LM_UINT8) Value32; - - Value32 = MEM_RD_OFFSET (pDevice, T3_MAC_ADDR_LOW_MAILBOX); - - pDevice->NodeAddress[2] = (LM_UINT8) (Value32 >> 24); - pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 16); - pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 8); - pDevice->NodeAddress[5] = (LM_UINT8) Value32; - - Status = LM_STATUS_SUCCESS; - } else { - Status = LM_NvramRead (pDevice, 0x7c, &Value32); - if (Status == LM_STATUS_SUCCESS) { - pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 16); - pDevice->NodeAddress[1] = (LM_UINT8) (Value32 >> 24); - - Status = LM_NvramRead (pDevice, 0x80, &Value32); - - pDevice->NodeAddress[2] = (LM_UINT8) Value32; - pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 8); - pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 16); - pDevice->NodeAddress[5] = (LM_UINT8) (Value32 >> 24); - } - } - - /* Assign a default address. */ - if (Status != LM_STATUS_SUCCESS) { -#ifndef EMBEDDED - printk (KERN_ERR - "Cannot get MAC addr from NVRAM. Using default.\n"); -#endif - pDevice->NodeAddress[0] = 0x00; - pDevice->NodeAddress[1] = 0x10; - pDevice->NodeAddress[2] = 0x18; - pDevice->NodeAddress[3] = 0x68; - pDevice->NodeAddress[4] = 0x61; - pDevice->NodeAddress[5] = 0x76; - } - - pDevice->PermanentNodeAddress[0] = pDevice->NodeAddress[0]; - pDevice->PermanentNodeAddress[1] = pDevice->NodeAddress[1]; - pDevice->PermanentNodeAddress[2] = pDevice->NodeAddress[2]; - pDevice->PermanentNodeAddress[3] = pDevice->NodeAddress[3]; - pDevice->PermanentNodeAddress[4] = pDevice->NodeAddress[4]; - pDevice->PermanentNodeAddress[5] = pDevice->NodeAddress[5]; - - /* Initialize the default values. */ - pDevice->NoTxPseudoHdrChksum = FALSE; - pDevice->NoRxPseudoHdrChksum = FALSE; - pDevice->NicSendBd = FALSE; - pDevice->TxPacketDescCnt = DEFAULT_TX_PACKET_DESC_COUNT; - pDevice->RxStdDescCnt = DEFAULT_STD_RCV_DESC_COUNT; - pDevice->RxCoalescingTicks = DEFAULT_RX_COALESCING_TICKS; - pDevice->TxCoalescingTicks = DEFAULT_TX_COALESCING_TICKS; - pDevice->RxMaxCoalescedFrames = DEFAULT_RX_MAX_COALESCED_FRAMES; - pDevice->TxMaxCoalescedFrames = DEFAULT_TX_MAX_COALESCED_FRAMES; - pDevice->RxCoalescingTicksDuringInt = BAD_DEFAULT_VALUE; - pDevice->TxCoalescingTicksDuringInt = BAD_DEFAULT_VALUE; - pDevice->RxMaxCoalescedFramesDuringInt = BAD_DEFAULT_VALUE; - pDevice->TxMaxCoalescedFramesDuringInt = BAD_DEFAULT_VALUE; - pDevice->StatsCoalescingTicks = DEFAULT_STATS_COALESCING_TICKS; - pDevice->EnableMWI = FALSE; - pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC; - pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC; - pDevice->DisableAutoNeg = FALSE; - pDevice->PhyIntMode = T3_PHY_INT_MODE_AUTO; - pDevice->LinkChngMode = T3_LINK_CHNG_MODE_AUTO; - pDevice->LedMode = LED_MODE_AUTO; - pDevice->ResetPhyOnInit = TRUE; - pDevice->DelayPciGrant = TRUE; - pDevice->UseTaggedStatus = FALSE; - pDevice->OneDmaAtOnce = BAD_DEFAULT_VALUE; - - pDevice->DmaMbufLowMark = T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO; - pDevice->RxMacMbufLowMark = T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO; - pDevice->MbufHighMark = T3_DEF_MBUF_HIGH_WMARK_JUMBO; - - pDevice->RequestedMediaType = LM_REQUESTED_MEDIA_TYPE_AUTO; - pDevice->TaskOffloadCap = LM_TASK_OFFLOAD_NONE; - pDevice->FlowControlCap = LM_FLOW_CONTROL_AUTO_PAUSE; - pDevice->EnableTbi = FALSE; -#if INCLUDE_TBI_SUPPORT - pDevice->PollTbiLink = BAD_DEFAULT_VALUE; -#endif - - switch (T3_ASIC_REV (pDevice->ChipRevId)) { - case T3_ASIC_REV_5704: - pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR; - pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE64; - break; - default: - pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR; - pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE96; - break; - } - - pDevice->LinkStatus = LM_STATUS_LINK_DOWN; - pDevice->QueueRxPackets = TRUE; - - pDevice->EnableWireSpeed = TRUE; - -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT; -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - /* Make this is a known adapter. */ - pAdapterInfo = LM_GetAdapterInfoBySsid (pDevice->SubsystemVendorId, - pDevice->SubsystemId); - - pDevice->BondId = REG_RD (pDevice, Grc.MiscCfg) & GRC_MISC_BD_ID_MASK; - if (pDevice->BondId != GRC_MISC_BD_ID_5700 && - pDevice->BondId != GRC_MISC_BD_ID_5701 && - pDevice->BondId != GRC_MISC_BD_ID_5702FE && - pDevice->BondId != GRC_MISC_BD_ID_5703 && - pDevice->BondId != GRC_MISC_BD_ID_5703S && - pDevice->BondId != GRC_MISC_BD_ID_5704 && - pDevice->BondId != GRC_MISC_BD_ID_5704CIOBE) { - return LM_STATUS_UNKNOWN_ADAPTER; - } - - pDevice->SplitModeEnable = SPLIT_MODE_DISABLE; - if ((pDevice->ChipRevId == T3_CHIP_ID_5704_A0) && - (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE)) { - pDevice->SplitModeEnable = SPLIT_MODE_ENABLE; - pDevice->SplitModeMaxReq = SPLIT_MODE_5704_MAX_REQ; - } - - /* Get Eeprom info. */ - Value32 = MEM_RD_OFFSET (pDevice, T3_NIC_DATA_SIG_ADDR); - if (Value32 == T3_NIC_DATA_SIG) { - EeSigFound = TRUE; - Value32 = MEM_RD_OFFSET (pDevice, T3_NIC_DATA_NIC_CFG_ADDR); - - /* Determine PHY type. */ - switch (Value32 & T3_NIC_CFG_PHY_TYPE_MASK) { - case T3_NIC_CFG_PHY_TYPE_COPPER: - EePhyTypeSerdes = FALSE; - break; - - case T3_NIC_CFG_PHY_TYPE_FIBER: - EePhyTypeSerdes = TRUE; - break; - - default: - EePhyTypeSerdes = FALSE; - break; - } - - /* Determine PHY led mode. */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - switch (Value32 & T3_NIC_CFG_LED_MODE_MASK) { - case T3_NIC_CFG_LED_MODE_TRIPLE_SPEED: - EePhyLedMode = LED_MODE_THREE_LINK; - break; - - case T3_NIC_CFG_LED_MODE_LINK_SPEED: - EePhyLedMode = LED_MODE_LINK10; - break; - - default: - EePhyLedMode = LED_MODE_AUTO; - break; - } - } else { - switch (Value32 & T3_NIC_CFG_LED_MODE_MASK) { - case T3_NIC_CFG_LED_MODE_OPEN_DRAIN: - EePhyLedMode = LED_MODE_OPEN_DRAIN; - break; - - case T3_NIC_CFG_LED_MODE_OUTPUT: - EePhyLedMode = LED_MODE_OUTPUT; - break; - - default: - EePhyLedMode = LED_MODE_AUTO; - break; - } - } - if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1 || - pDevice->ChipRevId == T3_CHIP_ID_5703_A2) { - /* Enable EEPROM write protection. */ - if (Value32 & T3_NIC_EEPROM_WP) { - pDevice->EepromWp = TRUE; - } - } - - /* Get the PHY Id. */ - Value32 = MEM_RD_OFFSET (pDevice, T3_NIC_DATA_PHY_ID_ADDR); - if (Value32) { - EePhyId = (((Value32 & T3_NIC_PHY_ID1_MASK) >> 16) & - PHY_ID1_OUI_MASK) << 10; - - Value32 = Value32 & T3_NIC_PHY_ID2_MASK; - - EePhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) | - (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & - PHY_ID2_REV_MASK); - } else { - EePhyId = 0; - } - } else { - EeSigFound = FALSE; - } - - /* Set the PHY address. */ - pDevice->PhyAddr = PHY_DEVICE_ID; - - /* Disable auto polling. */ - pDevice->MiMode = 0xc0000; - REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode); - MM_Wait (40); - - /* Get the PHY id. */ - LM_ReadPhy (pDevice, PHY_ID1_REG, &Value32); - pDevice->PhyId = (Value32 & PHY_ID1_OUI_MASK) << 10; - - LM_ReadPhy (pDevice, PHY_ID2_REG, &Value32); - pDevice->PhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) | - (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & PHY_ID2_REV_MASK); - - /* Set the EnableTbi flag to false if we have a copper PHY. */ - switch (pDevice->PhyId & PHY_ID_MASK) { - case PHY_BCM5400_PHY_ID: - pDevice->EnableTbi = FALSE; - break; - - case PHY_BCM5401_PHY_ID: - pDevice->EnableTbi = FALSE; - break; - - case PHY_BCM5411_PHY_ID: - pDevice->EnableTbi = FALSE; - break; - - case PHY_BCM5701_PHY_ID: - pDevice->EnableTbi = FALSE; - break; - - case PHY_BCM5703_PHY_ID: - pDevice->EnableTbi = FALSE; - break; - - case PHY_BCM5704_PHY_ID: - pDevice->EnableTbi = FALSE; - break; - - case PHY_BCM8002_PHY_ID: - pDevice->EnableTbi = TRUE; - break; - - default: - - if (pAdapterInfo) { - pDevice->PhyId = pAdapterInfo->PhyId; - pDevice->EnableTbi = pAdapterInfo->Serdes; - } else if (EeSigFound) { - pDevice->PhyId = EePhyId; - pDevice->EnableTbi = EePhyTypeSerdes; - } - break; - } - - /* Bail out if we don't know the copper PHY id. */ - if (UNKNOWN_PHY_ID (pDevice->PhyId) && !pDevice->EnableTbi) { - return LM_STATUS_FAILURE; - } - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5703) { - if ((pDevice->SavedCacheLineReg & 0xff00) < 0x4000) { - pDevice->SavedCacheLineReg &= 0xffff00ff; - pDevice->SavedCacheLineReg |= 0x4000; - } - } - /* Change driver parameters. */ - Status = MM_GetConfig (pDevice); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } -#if INCLUDE_5701_AX_FIX - if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0) { - pDevice->ResetPhyOnInit = TRUE; - } -#endif - - /* Save the current phy link status. */ - if (!pDevice->EnableTbi) { - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - - /* If we don't have link reset the PHY. */ - if (!(Value32 & PHY_STATUS_LINK_PASS) - || pDevice->ResetPhyOnInit) { - - LM_WritePhy (pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET); - - for (j = 0; j < 100; j++) { - MM_Wait (10); - - LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32); - if (Value32 && !(Value32 & PHY_CTRL_PHY_RESET)) { - MM_Wait (40); - break; - } - } - -#if INCLUDE_5701_AX_FIX - /* 5701_AX_BX bug: only advertises 10mb speed. */ - if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0) { - - Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD | - PHY_AN_AD_10BASET_HALF | - PHY_AN_AD_10BASET_FULL | - PHY_AN_AD_100BASETX_FULL | - PHY_AN_AD_100BASETX_HALF; - Value32 |= GetPhyAdFlowCntrlSettings (pDevice); - LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - - Value32 = BCM540X_AN_AD_1000BASET_HALF | - BCM540X_AN_AD_1000BASET_FULL | - BCM540X_CONFIG_AS_MASTER | - BCM540X_ENABLE_CONFIG_AS_MASTER; - LM_WritePhy (pDevice, - BCM540X_1000BASET_CTRL_REG, - Value32); - pDevice->advertising1000 = Value32; - - LM_WritePhy (pDevice, PHY_CTRL_REG, - PHY_CTRL_AUTO_NEG_ENABLE | - PHY_CTRL_RESTART_AUTO_NEG); - } -#endif - if (T3_ASIC_REV (pDevice->ChipRevId) == - T3_ASIC_REV_5703) { - LM_WritePhy (pDevice, 0x18, 0x0c00); - LM_WritePhy (pDevice, 0x17, 0x201f); - LM_WritePhy (pDevice, 0x15, 0x2aaa); - } - if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) { - LM_WritePhy (pDevice, 0x1c, 0x8d68); - LM_WritePhy (pDevice, 0x1c, 0x8d68); - } - /* Enable Ethernet@WireSpeed. */ - if (pDevice->EnableWireSpeed) { - LM_WritePhy (pDevice, 0x18, 0x7007); - LM_ReadPhy (pDevice, 0x18, &Value32); - LM_WritePhy (pDevice, 0x18, - Value32 | BIT_15 | BIT_4); - } - } - } - - /* Turn off tap power management. */ - if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) { - LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x0c20); - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1804); - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1204); - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0132); - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0232); - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0a20); - - MM_Wait (40); - } -#if INCLUDE_TBI_SUPPORT - pDevice->IgnoreTbiLinkChange = FALSE; - - if (pDevice->EnableTbi) { - pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE; - pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY; - if ((pDevice->PollTbiLink == BAD_DEFAULT_VALUE) || - pDevice->DisableAutoNeg) { - pDevice->PollTbiLink = FALSE; - } - } else { - pDevice->PollTbiLink = FALSE; - } -#endif /* INCLUDE_TBI_SUPPORT */ - - /* UseTaggedStatus is only valid for 5701 and later. */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - pDevice->UseTaggedStatus = FALSE; - - pDevice->CoalesceMode = 0; - } else { - pDevice->CoalesceMode = - HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT | - HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT; - } - - /* Set the status block size. */ - if (T3_CHIP_REV (pDevice->ChipRevId) != T3_CHIP_REV_5700_AX && - T3_CHIP_REV (pDevice->ChipRevId) != T3_CHIP_REV_5700_BX) { - pDevice->CoalesceMode |= HOST_COALESCE_32_BYTE_STATUS_MODE; - } - - /* Check the DURING_INT coalescing ticks parameters. */ - if (pDevice->UseTaggedStatus) { - if (pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) { - pDevice->RxCoalescingTicksDuringInt = - DEFAULT_RX_COALESCING_TICKS_DURING_INT; - } - - if (pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) { - pDevice->TxCoalescingTicksDuringInt = - DEFAULT_TX_COALESCING_TICKS_DURING_INT; - } - - if (pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) { - pDevice->RxMaxCoalescedFramesDuringInt = - DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT; - } - - if (pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) { - pDevice->TxMaxCoalescedFramesDuringInt = - DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT; - } - } else { - if (pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) { - pDevice->RxCoalescingTicksDuringInt = 0; - } - - if (pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) { - pDevice->TxCoalescingTicksDuringInt = 0; - } - - if (pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) { - pDevice->RxMaxCoalescedFramesDuringInt = 0; - } - - if (pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) { - pDevice->TxMaxCoalescedFramesDuringInt = 0; - } - } - -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - if (pDevice->RxMtu <= (MAX_STD_RCV_BUFFER_SIZE - 8 /* CRC */ )) { - pDevice->RxJumboDescCnt = 0; - if (pDevice->RxMtu <= MAX_ETHERNET_PACKET_SIZE_NO_CRC) { - pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC; - } - } else { - pDevice->RxJumboBufferSize = - (pDevice->RxMtu + 8 /* CRC + VLAN */ + - COMMON_CACHE_LINE_SIZE - 1) & ~COMMON_CACHE_LINE_MASK; - - if (pDevice->RxJumboBufferSize > MAX_JUMBO_RCV_BUFFER_SIZE) { - pDevice->RxJumboBufferSize = - DEFAULT_JUMBO_RCV_BUFFER_SIZE; - pDevice->RxMtu = - pDevice->RxJumboBufferSize - 8 /* CRC + VLAN */ ; - } - pDevice->TxMtu = pDevice->RxMtu; - - } -#else - pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC; -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - pDevice->RxPacketDescCnt = -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - pDevice->RxJumboDescCnt + -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - pDevice->RxStdDescCnt; - - if (pDevice->TxMtu < MAX_ETHERNET_PACKET_SIZE_NO_CRC) { - pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC; - } - - if (pDevice->TxMtu > MAX_JUMBO_TX_BUFFER_SIZE) { - pDevice->TxMtu = MAX_JUMBO_TX_BUFFER_SIZE; - } - - /* Configure the proper ways to get link change interrupt. */ - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO) { - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT; - } else { - pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY; - } - } else if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - /* Auto-polling does not work on 5700_AX and 5700_BX. */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT; - } - } - - /* Determine the method to get link change status. */ - if (pDevice->LinkChngMode == T3_LINK_CHNG_MODE_AUTO) { - /* The link status bit in the status block does not work on 5700_AX */ - /* and 5700_BX chips. */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - pDevice->LinkChngMode = - T3_LINK_CHNG_MODE_USE_STATUS_REG; - } else { - pDevice->LinkChngMode = - T3_LINK_CHNG_MODE_USE_STATUS_BLOCK; - } - } - - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG; - } - - /* Configure PHY led mode. */ - if (pDevice->LedMode == LED_MODE_AUTO) { - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - if (pDevice->SubsystemVendorId == T3_SVID_DELL) { - pDevice->LedMode = LED_MODE_LINK10; - } else { - pDevice->LedMode = LED_MODE_THREE_LINK; - - if (EeSigFound && EePhyLedMode != LED_MODE_AUTO) { - pDevice->LedMode = EePhyLedMode; - } - } - - /* bug? 5701 in LINK10 mode does not seem to work when */ - /* PhyIntMode is LINK_READY. */ - if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 - && -#if INCLUDE_TBI_SUPPORT - pDevice->EnableTbi == FALSE && -#endif - pDevice->LedMode == LED_MODE_LINK10) { - pDevice->PhyIntMode = - T3_PHY_INT_MODE_MI_INTERRUPT; - pDevice->LinkChngMode = - T3_LINK_CHNG_MODE_USE_STATUS_REG; - } - - if (pDevice->EnableTbi) { - pDevice->LedMode = LED_MODE_THREE_LINK; - } - } else { - if (EeSigFound && EePhyLedMode != LED_MODE_AUTO) { - pDevice->LedMode = EePhyLedMode; - } else { - pDevice->LedMode = LED_MODE_OPEN_DRAIN; - } - } - } - - /* Enable OneDmaAtOnce. */ - if (pDevice->OneDmaAtOnce == BAD_DEFAULT_VALUE) { - pDevice->OneDmaAtOnce = FALSE; - } - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B2) { - pDevice->WolSpeed = WOL_SPEED_10MB; - } else { - pDevice->WolSpeed = WOL_SPEED_100MB; - } - - /* Offloadings. */ - pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE; - - /* Turn off task offloading on Ax. */ - if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) { - pDevice->TaskOffloadCap &= ~(LM_TASK_OFFLOAD_TX_TCP_CHECKSUM | - LM_TASK_OFFLOAD_TX_UDP_CHECKSUM); - } - pDevice->PciState = REG_RD (pDevice, PciCfg.PciState); - LM_ReadVPD (pDevice); - LM_ReadBootCodeVersion (pDevice); - LM_GetBusSpeed (pDevice); - - return LM_STATUS_SUCCESS; -} /* LM_GetAdapterInfo */ - -STATIC PLM_ADAPTER_INFO LM_GetAdapterInfoBySsid (LM_UINT16 Svid, LM_UINT16 Ssid) -{ - static LM_ADAPTER_INFO AdapterArr[] = { - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A6, - PHY_BCM5401_PHY_ID, 0}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A5, - PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700T6, - PHY_BCM8002_PHY_ID, 1}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A9, 0, 1}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T1, - PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T8, - PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A7, 0, 1}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A10, - PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A12, - PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax1, - PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax2, - PHY_BCM5701_PHY_ID, 0}, - - {T3_SVID_3COM, T3_SSID_3COM_3C996T, PHY_BCM5401_PHY_ID, 0}, - {T3_SVID_3COM, T3_SSID_3COM_3C996BT, PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_3COM, T3_SSID_3COM_3C996SX, 0, 1}, - {T3_SVID_3COM, T3_SSID_3COM_3C1000T, PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_3COM, T3_SSID_3COM_3C940BR01, PHY_BCM5701_PHY_ID, 0}, - - {T3_SVID_DELL, T3_SSID_DELL_VIPER, PHY_BCM5401_PHY_ID, 0}, - {T3_SVID_DELL, T3_SSID_DELL_JAGUAR, PHY_BCM5401_PHY_ID, 0}, - {T3_SVID_DELL, T3_SSID_DELL_MERLOT, PHY_BCM5411_PHY_ID, 0}, - {T3_SVID_DELL, T3_SSID_DELL_SLIM_MERLOT, PHY_BCM5411_PHY_ID, 0}, - - {T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE, PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE_2, PHY_BCM5701_PHY_ID, - 0}, - {T3_SVID_COMPAQ, T3_SSID_COMPAQ_CHANGELING, 0, 1}, - {T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780, PHY_BCM5701_PHY_ID, 0}, - {T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780_2, PHY_BCM5701_PHY_ID, - 0}, - - }; - LM_UINT32 j; - - for (j = 0; j < sizeof (AdapterArr) / sizeof (LM_ADAPTER_INFO); j++) { - if (AdapterArr[j].Svid == Svid && AdapterArr[j].Ssid == Ssid) { - return &AdapterArr[j]; - } - } - - return NULL; -} - -/******************************************************************************/ -/* Description: */ -/* This routine sets up receive/transmit buffer descriptions queues. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS LM_InitializeAdapter (PLM_DEVICE_BLOCK pDevice) -{ - LM_PHYSICAL_ADDRESS MemPhy; - PLM_UINT8 pMemVirt; - PLM_PACKET pPacket; - LM_STATUS Status; - LM_UINT32 Size; - LM_UINT32 j; - - /* Set power state to D0. */ - LM_SetPowerState (pDevice, LM_POWER_STATE_D0); - - /* Intialize the queues. */ - QQ_InitQueue (&pDevice->RxPacketReceivedQ.Container, - MAX_RX_PACKET_DESC_COUNT); - QQ_InitQueue (&pDevice->RxPacketFreeQ.Container, - MAX_RX_PACKET_DESC_COUNT); - - QQ_InitQueue (&pDevice->TxPacketFreeQ.Container, - MAX_TX_PACKET_DESC_COUNT); - QQ_InitQueue (&pDevice->TxPacketActiveQ.Container, - MAX_TX_PACKET_DESC_COUNT); - QQ_InitQueue (&pDevice->TxPacketXmittedQ.Container, - MAX_TX_PACKET_DESC_COUNT); - - /* Allocate shared memory for: status block, the buffers for receive */ - /* rings -- standard, mini, jumbo, and return rings. */ - Size = T3_STATUS_BLOCK_SIZE + sizeof (T3_STATS_BLOCK) + - T3_STD_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD) + -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD) + -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD); - - /* Memory for host based Send BD. */ - if (pDevice->NicSendBd == FALSE) { - Size += sizeof (T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT; - } - - /* Allocate the memory block. */ - Status = - MM_AllocateSharedMemory (pDevice, Size, (PLM_VOID) & pMemVirt, - &MemPhy, FALSE); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - - /* Program DMA Read/Write */ - if (pDevice->PciState & T3_PCI_STATE_NOT_PCI_X_BUS) { - pDevice->DmaReadWriteCtrl = 0x763f000f; - } else { - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5704) { - pDevice->DmaReadWriteCtrl = 0x761f0000; - } else { - pDevice->DmaReadWriteCtrl = 0x761b000f; - } - if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1 || - pDevice->ChipRevId == T3_CHIP_ID_5703_A2) { - pDevice->OneDmaAtOnce = TRUE; - } - } - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5703) { - pDevice->DmaReadWriteCtrl &= 0xfffffff0; - } - - if (pDevice->OneDmaAtOnce) { - pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_ONE_DMA_AT_ONCE; - } - REG_WR (pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl); - - if (LM_DmaTest (pDevice, pMemVirt, MemPhy, 0x400) != LM_STATUS_SUCCESS) { - return LM_STATUS_FAILURE; - } - - /* Status block. */ - pDevice->pStatusBlkVirt = (PT3_STATUS_BLOCK) pMemVirt; - pDevice->StatusBlkPhy = MemPhy; - pMemVirt += T3_STATUS_BLOCK_SIZE; - LM_INC_PHYSICAL_ADDRESS (&MemPhy, T3_STATUS_BLOCK_SIZE); - - /* Statistics block. */ - pDevice->pStatsBlkVirt = (PT3_STATS_BLOCK) pMemVirt; - pDevice->StatsBlkPhy = MemPhy; - pMemVirt += sizeof (T3_STATS_BLOCK); - LM_INC_PHYSICAL_ADDRESS (&MemPhy, sizeof (T3_STATS_BLOCK)); - - /* Receive standard BD buffer. */ - pDevice->pRxStdBdVirt = (PT3_RCV_BD) pMemVirt; - pDevice->RxStdBdPhy = MemPhy; - - pMemVirt += T3_STD_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD); - LM_INC_PHYSICAL_ADDRESS (&MemPhy, - T3_STD_RCV_RCB_ENTRY_COUNT * - sizeof (T3_RCV_BD)); - -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - /* Receive jumbo BD buffer. */ - pDevice->pRxJumboBdVirt = (PT3_RCV_BD) pMemVirt; - pDevice->RxJumboBdPhy = MemPhy; - - pMemVirt += T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD); - LM_INC_PHYSICAL_ADDRESS (&MemPhy, - T3_JUMBO_RCV_RCB_ENTRY_COUNT * - sizeof (T3_RCV_BD)); -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - /* Receive return BD buffer. */ - pDevice->pRcvRetBdVirt = (PT3_RCV_BD) pMemVirt; - pDevice->RcvRetBdPhy = MemPhy; - - pMemVirt += T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD); - LM_INC_PHYSICAL_ADDRESS (&MemPhy, - T3_RCV_RETURN_RCB_ENTRY_COUNT * - sizeof (T3_RCV_BD)); - - /* Set up Send BD. */ - if (pDevice->NicSendBd == FALSE) { - pDevice->pSendBdVirt = (PT3_SND_BD) pMemVirt; - pDevice->SendBdPhy = MemPhy; - - pMemVirt += sizeof (T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT; - LM_INC_PHYSICAL_ADDRESS (&MemPhy, - sizeof (T3_SND_BD) * - T3_SEND_RCB_ENTRY_COUNT); - } else { - pDevice->pSendBdVirt = (PT3_SND_BD) - pDevice->pMemView->uIntMem.First32k.BufferDesc; - pDevice->SendBdPhy.High = 0; - pDevice->SendBdPhy.Low = T3_NIC_SND_BUFFER_DESC_ADDR; - } - - /* Allocate memory for packet descriptors. */ - Size = (pDevice->RxPacketDescCnt + - pDevice->TxPacketDescCnt) * MM_PACKET_DESC_SIZE; - Status = MM_AllocateMemory (pDevice, Size, (PLM_VOID *) & pPacket); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - pDevice->pPacketDescBase = (PLM_VOID) pPacket; - - /* Create transmit packet descriptors from the memory block and add them */ - /* to the TxPacketFreeQ for each send ring. */ - for (j = 0; j < pDevice->TxPacketDescCnt; j++) { - /* Ring index. */ - pPacket->Flags = 0; - - /* Queue the descriptor in the TxPacketFreeQ of the 'k' ring. */ - QQ_PushTail (&pDevice->TxPacketFreeQ.Container, pPacket); - - /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */ - /* is the total size of the packet descriptor including the */ - /* os-specific extensions in the UM_PACKET structure. */ - pPacket = - (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE); - } /* for(j.. */ - - /* Create receive packet descriptors from the memory block and add them */ - /* to the RxPacketFreeQ. Create the Standard packet descriptors. */ - for (j = 0; j < pDevice->RxStdDescCnt; j++) { - /* Receive producer ring. */ - pPacket->u.Rx.RcvProdRing = T3_STD_RCV_PROD_RING; - - /* Receive buffer size. */ - pPacket->u.Rx.RxBufferSize = MAX_STD_RCV_BUFFER_SIZE; - - /* Add the descriptor to RxPacketFreeQ. */ - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket); - - /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */ - /* is the total size of the packet descriptor including the */ - /* os-specific extensions in the UM_PACKET structure. */ - pPacket = - (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE); - } /* for */ - -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - /* Create the Jumbo packet descriptors. */ - for (j = 0; j < pDevice->RxJumboDescCnt; j++) { - /* Receive producer ring. */ - pPacket->u.Rx.RcvProdRing = T3_JUMBO_RCV_PROD_RING; - - /* Receive buffer size. */ - pPacket->u.Rx.RxBufferSize = pDevice->RxJumboBufferSize; - - /* Add the descriptor to RxPacketFreeQ. */ - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket); - - /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */ - /* is the total size of the packet descriptor including the */ - /* os-specific extensions in the UM_PACKET structure. */ - pPacket = - (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE); - } /* for */ -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - /* Initialize the rest of the packet descriptors. */ - Status = MM_InitializeUmPackets (pDevice); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - - /* if */ - /* Default receive mask. */ - pDevice->ReceiveMask = LM_ACCEPT_MULTICAST | LM_ACCEPT_BROADCAST | - LM_ACCEPT_UNICAST; - - /* Make sure we are in the first 32k memory window or NicSendBd. */ - REG_WR (pDevice, PciCfg.MemWindowBaseAddr, 0); - - /* Initialize the hardware. */ - Status = LM_ResetAdapter (pDevice); - if (Status != LM_STATUS_SUCCESS) { - return Status; - } - - /* We are done with initialization. */ - pDevice->InitDone = TRUE; - - return LM_STATUS_SUCCESS; -} /* LM_InitializeAdapter */ - -/******************************************************************************/ -/* Description: */ -/* This function Enables/Disables a given block. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS -LM_CntrlBlock (PLM_DEVICE_BLOCK pDevice, LM_UINT32 mask, LM_UINT32 cntrl) -{ - LM_UINT32 j, i, data; - LM_UINT32 MaxWaitCnt; - - MaxWaitCnt = 2; - j = 0; - - for (i = 0; i < 32; i++) { - if (!(mask & (1 << i))) - continue; - - switch (1 << i) { - case T3_BLOCK_DMA_RD: - data = REG_RD (pDevice, DmaRead.Mode); - if (cntrl == LM_DISABLE) { - data &= ~DMA_READ_MODE_ENABLE; - REG_WR (pDevice, DmaRead.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, DmaRead.Mode) & - DMA_READ_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, DmaRead.Mode, - data | DMA_READ_MODE_ENABLE); - break; - - case T3_BLOCK_DMA_COMP: - data = REG_RD (pDevice, DmaComp.Mode); - if (cntrl == LM_DISABLE) { - data &= ~DMA_COMP_MODE_ENABLE; - REG_WR (pDevice, DmaComp.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, DmaComp.Mode) & - DMA_COMP_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, DmaComp.Mode, - data | DMA_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_RX_BD_INITIATOR: - data = REG_RD (pDevice, RcvBdIn.Mode); - if (cntrl == LM_DISABLE) { - data &= ~RCV_BD_IN_MODE_ENABLE; - REG_WR (pDevice, RcvBdIn.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, RcvBdIn.Mode) & - RCV_BD_IN_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, RcvBdIn.Mode, - data | RCV_BD_IN_MODE_ENABLE); - break; - - case T3_BLOCK_RX_BD_COMP: - data = REG_RD (pDevice, RcvBdComp.Mode); - if (cntrl == LM_DISABLE) { - data &= ~RCV_BD_COMP_MODE_ENABLE; - REG_WR (pDevice, RcvBdComp.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, RcvBdComp.Mode) & - RCV_BD_COMP_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, RcvBdComp.Mode, - data | RCV_BD_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_DMA_WR: - data = REG_RD (pDevice, DmaWrite.Mode); - if (cntrl == LM_DISABLE) { - data &= ~DMA_WRITE_MODE_ENABLE; - REG_WR (pDevice, DmaWrite.Mode, data); - - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, DmaWrite.Mode) & - DMA_WRITE_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, DmaWrite.Mode, - data | DMA_WRITE_MODE_ENABLE); - break; - - case T3_BLOCK_MSI_HANDLER: - data = REG_RD (pDevice, Msi.Mode); - if (cntrl == LM_DISABLE) { - data &= ~MSI_MODE_ENABLE; - REG_WR (pDevice, Msi.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, Msi.Mode) & - MSI_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, Msi.Mode, - data | MSI_MODE_ENABLE); - break; - - case T3_BLOCK_RX_LIST_PLMT: - data = REG_RD (pDevice, RcvListPlmt.Mode); - if (cntrl == LM_DISABLE) { - data &= ~RCV_LIST_PLMT_MODE_ENABLE; - REG_WR (pDevice, RcvListPlmt.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, RcvListPlmt.Mode) - & RCV_LIST_PLMT_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, RcvListPlmt.Mode, - data | RCV_LIST_PLMT_MODE_ENABLE); - break; - - case T3_BLOCK_RX_LIST_SELECTOR: - data = REG_RD (pDevice, RcvListSel.Mode); - if (cntrl == LM_DISABLE) { - data &= ~RCV_LIST_SEL_MODE_ENABLE; - REG_WR (pDevice, RcvListSel.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, RcvListSel.Mode) & - RCV_LIST_SEL_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, RcvListSel.Mode, - data | RCV_LIST_SEL_MODE_ENABLE); - break; - - case T3_BLOCK_RX_DATA_INITIATOR: - data = REG_RD (pDevice, RcvDataBdIn.Mode); - if (cntrl == LM_DISABLE) { - data &= ~RCV_DATA_BD_IN_MODE_ENABLE; - REG_WR (pDevice, RcvDataBdIn.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, RcvDataBdIn.Mode) - & RCV_DATA_BD_IN_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, RcvDataBdIn.Mode, - data | RCV_DATA_BD_IN_MODE_ENABLE); - break; - - case T3_BLOCK_RX_DATA_COMP: - data = REG_RD (pDevice, RcvDataComp.Mode); - if (cntrl == LM_DISABLE) { - data &= ~RCV_DATA_COMP_MODE_ENABLE; - REG_WR (pDevice, RcvDataComp.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, RcvDataBdIn.Mode) - & RCV_DATA_COMP_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, RcvDataComp.Mode, - data | RCV_DATA_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_HOST_COALESING: - data = REG_RD (pDevice, HostCoalesce.Mode); - if (cntrl == LM_DISABLE) { - data &= ~HOST_COALESCE_ENABLE; - REG_WR (pDevice, HostCoalesce.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, SndBdIn.Mode) & - HOST_COALESCE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, HostCoalesce.Mode, - data | HOST_COALESCE_ENABLE); - break; - - case T3_BLOCK_MAC_RX_ENGINE: - if (cntrl == LM_DISABLE) { - pDevice->RxMode &= ~RX_MODE_ENABLE; - REG_WR (pDevice, MacCtrl.RxMode, - pDevice->RxMode); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, MacCtrl.RxMode) & - RX_MODE_ENABLE)) { - break; - } - MM_Wait (10); - } - } else { - pDevice->RxMode |= RX_MODE_ENABLE; - REG_WR (pDevice, MacCtrl.RxMode, - pDevice->RxMode); - } - break; - - case T3_BLOCK_MBUF_CLUSTER_FREE: - data = REG_RD (pDevice, MbufClusterFree.Mode); - if (cntrl == LM_DISABLE) { - data &= ~MBUF_CLUSTER_FREE_MODE_ENABLE; - REG_WR (pDevice, MbufClusterFree.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD - (pDevice, - MbufClusterFree. - Mode) & - MBUF_CLUSTER_FREE_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, MbufClusterFree.Mode, - data | MBUF_CLUSTER_FREE_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_BD_INITIATOR: - data = REG_RD (pDevice, SndBdIn.Mode); - if (cntrl == LM_DISABLE) { - data &= ~SND_BD_IN_MODE_ENABLE; - REG_WR (pDevice, SndBdIn.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, SndBdIn.Mode) & - SND_BD_IN_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, SndBdIn.Mode, - data | SND_BD_IN_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_BD_COMP: - data = REG_RD (pDevice, SndBdComp.Mode); - if (cntrl == LM_DISABLE) { - data &= ~SND_BD_COMP_MODE_ENABLE; - REG_WR (pDevice, SndBdComp.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, SndBdComp.Mode) & - SND_BD_COMP_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, SndBdComp.Mode, - data | SND_BD_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_BD_SELECTOR: - data = REG_RD (pDevice, SndBdSel.Mode); - if (cntrl == LM_DISABLE) { - data &= ~SND_BD_SEL_MODE_ENABLE; - REG_WR (pDevice, SndBdSel.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, SndBdSel.Mode) & - SND_BD_SEL_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, SndBdSel.Mode, - data | SND_BD_SEL_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_DATA_INITIATOR: - data = REG_RD (pDevice, SndDataIn.Mode); - if (cntrl == LM_DISABLE) { - data &= ~T3_SND_DATA_IN_MODE_ENABLE; - REG_WR (pDevice, SndDataIn.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, SndDataIn.Mode) & - T3_SND_DATA_IN_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, SndDataIn.Mode, - data | T3_SND_DATA_IN_MODE_ENABLE); - break; - - case T3_BLOCK_SEND_DATA_COMP: - data = REG_RD (pDevice, SndDataComp.Mode); - if (cntrl == LM_DISABLE) { - data &= ~SND_DATA_COMP_MODE_ENABLE; - REG_WR (pDevice, SndDataComp.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, SndDataComp.Mode) - & SND_DATA_COMP_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, SndDataComp.Mode, - data | SND_DATA_COMP_MODE_ENABLE); - break; - - case T3_BLOCK_MAC_TX_ENGINE: - if (cntrl == LM_DISABLE) { - pDevice->TxMode &= ~TX_MODE_ENABLE; - REG_WR (pDevice, MacCtrl.TxMode, - pDevice->TxMode); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, MacCtrl.TxMode) & - TX_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else { - pDevice->TxMode |= TX_MODE_ENABLE; - REG_WR (pDevice, MacCtrl.TxMode, - pDevice->TxMode); - } - break; - - case T3_BLOCK_MEM_ARBITOR: - data = REG_RD (pDevice, MemArbiter.Mode); - if (cntrl == LM_DISABLE) { - data &= ~T3_MEM_ARBITER_MODE_ENABLE; - REG_WR (pDevice, MemArbiter.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, MemArbiter.Mode) & - T3_MEM_ARBITER_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, MemArbiter.Mode, - data | T3_MEM_ARBITER_MODE_ENABLE); - break; - - case T3_BLOCK_MBUF_MANAGER: - data = REG_RD (pDevice, BufMgr.Mode); - if (cntrl == LM_DISABLE) { - data &= ~BUFMGR_MODE_ENABLE; - REG_WR (pDevice, BufMgr.Mode, data); - for (j = 0; j < MaxWaitCnt; j++) { - if (! - (REG_RD (pDevice, BufMgr.Mode) & - BUFMGR_MODE_ENABLE)) - break; - MM_Wait (10); - } - } else - REG_WR (pDevice, BufMgr.Mode, - data | BUFMGR_MODE_ENABLE); - break; - - case T3_BLOCK_MAC_GLOBAL: - if (cntrl == LM_DISABLE) { - pDevice->MacMode &= ~(MAC_MODE_ENABLE_TDE | - MAC_MODE_ENABLE_RDE | - MAC_MODE_ENABLE_FHDE); - } else { - pDevice->MacMode |= (MAC_MODE_ENABLE_TDE | - MAC_MODE_ENABLE_RDE | - MAC_MODE_ENABLE_FHDE); - } - REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode); - break; - - default: - return LM_STATUS_FAILURE; - } /* switch */ - - if (j >= MaxWaitCnt) { - return LM_STATUS_FAILURE; - } - } - - return LM_STATUS_SUCCESS; -} - -/******************************************************************************/ -/* Description: */ -/* This function reinitializes the adapter. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS LM_ResetAdapter (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 Value32; - LM_UINT16 Value16; - LM_UINT32 j, k; - - /* Disable interrupt. */ - LM_DisableInterrupt (pDevice); - - /* May get a spurious interrupt */ - pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED; - - /* Disable transmit and receive DMA engines. Abort all pending requests. */ - if (pDevice->InitDone) { - LM_Abort (pDevice); - } - - pDevice->ShuttingDown = FALSE; - - LM_ResetChip (pDevice); - - /* Bug: Athlon fix for B3 silicon only. This bit does not do anything */ - /* in other chip revisions. */ - if (pDevice->DelayPciGrant) { - Value32 = REG_RD (pDevice, PciCfg.ClockCtrl); - REG_WR (pDevice, PciCfg.ClockCtrl, Value32 | BIT_31); - } - - if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) { - if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) { - Value32 = REG_RD (pDevice, PciCfg.PciState); - Value32 |= T3_PCI_STATE_RETRY_SAME_DMA; - REG_WR (pDevice, PciCfg.PciState, Value32); - } - } - - /* Enable TaggedStatus mode. */ - if (pDevice->UseTaggedStatus) { - pDevice->MiscHostCtrl |= - MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE; - } - - /* Restore PCI configuration registers. */ - MM_WriteConfig32 (pDevice, PCI_CACHE_LINE_SIZE_REG, - pDevice->SavedCacheLineReg); - MM_WriteConfig32 (pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, - (pDevice->SubsystemId << 16) | pDevice-> - SubsystemVendorId); - - /* Clear the statistics block. */ - for (j = 0x0300; j < 0x0b00; j++) { - MEM_WR_OFFSET (pDevice, j, 0); - } - - /* Initialize the statistis Block */ - pDevice->pStatusBlkVirt->Status = 0; - pDevice->pStatusBlkVirt->RcvStdConIdx = 0; - pDevice->pStatusBlkVirt->RcvJumboConIdx = 0; - pDevice->pStatusBlkVirt->RcvMiniConIdx = 0; - - for (j = 0; j < 16; j++) { - pDevice->pStatusBlkVirt->Idx[j].RcvProdIdx = 0; - pDevice->pStatusBlkVirt->Idx[j].SendConIdx = 0; - } - - for (k = 0; k < T3_STD_RCV_RCB_ENTRY_COUNT; k++) { - pDevice->pRxStdBdVirt[k].HostAddr.High = 0; - pDevice->pRxStdBdVirt[k].HostAddr.Low = 0; - } - -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - /* Receive jumbo BD buffer. */ - for (k = 0; k < T3_JUMBO_RCV_RCB_ENTRY_COUNT; k++) { - pDevice->pRxJumboBdVirt[k].HostAddr.High = 0; - pDevice->pRxJumboBdVirt[k].HostAddr.Low = 0; - } -#endif - - REG_WR (pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl); - - /* GRC mode control register. */ -#ifdef BIG_ENDIAN_PCI /* Jimmy, this ifdef block deleted in new code! */ - Value32 = - GRC_MODE_WORD_SWAP_DATA | - GRC_MODE_WORD_SWAP_NON_FRAME_DATA | - GRC_MODE_INT_ON_MAC_ATTN | GRC_MODE_HOST_STACK_UP; -#else - /* No CPU Swap modes for PCI IO */ - Value32 = -#ifdef BIG_ENDIAN_HOST - GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | - GRC_MODE_WORD_SWAP_NON_FRAME_DATA | - GRC_MODE_BYTE_SWAP_DATA | GRC_MODE_WORD_SWAP_DATA | -#else - GRC_MODE_WORD_SWAP_NON_FRAME_DATA | - GRC_MODE_BYTE_SWAP_DATA | GRC_MODE_WORD_SWAP_DATA | -#endif - GRC_MODE_INT_ON_MAC_ATTN | GRC_MODE_HOST_STACK_UP; -#endif /* !BIG_ENDIAN_PCI */ - - /* Configure send BD mode. */ - if (pDevice->NicSendBd == FALSE) { - Value32 |= GRC_MODE_HOST_SEND_BDS; - } else { - Value32 |= GRC_MODE_4X_NIC_BASED_SEND_RINGS; - } - - /* Configure pseudo checksum mode. */ - if (pDevice->NoTxPseudoHdrChksum) { - Value32 |= GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM; - } - - if (pDevice->NoRxPseudoHdrChksum) { - Value32 |= GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM; - } - - REG_WR (pDevice, Grc.Mode, Value32); - - /* Setup the timer prescalar register. */ - REG_WR (pDevice, Grc.MiscCfg, 65 << 1); /* Clock is alwasy 66MHz. */ - - /* Set up the MBUF pool base address and size. */ - REG_WR (pDevice, BufMgr.MbufPoolAddr, pDevice->MbufBase); - REG_WR (pDevice, BufMgr.MbufPoolSize, pDevice->MbufSize); - - /* Set up the DMA descriptor pool base address and size. */ - REG_WR (pDevice, BufMgr.DmaDescPoolAddr, T3_NIC_DMA_DESC_POOL_ADDR); - REG_WR (pDevice, BufMgr.DmaDescPoolSize, T3_NIC_DMA_DESC_POOL_SIZE); - - /* Configure MBUF and Threshold watermarks */ - /* Configure the DMA read MBUF low water mark. */ - if (pDevice->DmaMbufLowMark) { - REG_WR (pDevice, BufMgr.MbufReadDmaLowWaterMark, - pDevice->DmaMbufLowMark); - } else { - if (pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) { - REG_WR (pDevice, BufMgr.MbufReadDmaLowWaterMark, - T3_DEF_DMA_MBUF_LOW_WMARK); - } else { - REG_WR (pDevice, BufMgr.MbufReadDmaLowWaterMark, - T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO); - } - } - - /* Configure the MAC Rx MBUF low water mark. */ - if (pDevice->RxMacMbufLowMark) { - REG_WR (pDevice, BufMgr.MbufMacRxLowWaterMark, - pDevice->RxMacMbufLowMark); - } else { - if (pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) { - REG_WR (pDevice, BufMgr.MbufMacRxLowWaterMark, - T3_DEF_RX_MAC_MBUF_LOW_WMARK); - } else { - REG_WR (pDevice, BufMgr.MbufMacRxLowWaterMark, - T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO); - } - } - - /* Configure the MBUF high water mark. */ - if (pDevice->MbufHighMark) { - REG_WR (pDevice, BufMgr.MbufHighWaterMark, - pDevice->MbufHighMark); - } else { - if (pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) { - REG_WR (pDevice, BufMgr.MbufHighWaterMark, - T3_DEF_MBUF_HIGH_WMARK); - } else { - REG_WR (pDevice, BufMgr.MbufHighWaterMark, - T3_DEF_MBUF_HIGH_WMARK_JUMBO); - } - } - - REG_WR (pDevice, BufMgr.DmaLowWaterMark, T3_DEF_DMA_DESC_LOW_WMARK); - REG_WR (pDevice, BufMgr.DmaHighWaterMark, T3_DEF_DMA_DESC_HIGH_WMARK); - - /* Enable buffer manager. */ - REG_WR (pDevice, BufMgr.Mode, - BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE); - - for (j = 0; j < 2000; j++) { - if (REG_RD (pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE) - break; - MM_Wait (10); - } - - if (j >= 2000) { - return LM_STATUS_FAILURE; - } - - /* Enable the FTQs. */ - REG_WR (pDevice, Ftq.Reset, 0xffffffff); - REG_WR (pDevice, Ftq.Reset, 0); - - /* Wait until FTQ is ready */ - for (j = 0; j < 2000; j++) { - if (REG_RD (pDevice, Ftq.Reset) == 0) - break; - MM_Wait (10); - } - - if (j >= 2000) { - return LM_STATUS_FAILURE; - } - - /* Initialize the Standard Receive RCB. */ - REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.High, - pDevice->RxStdBdPhy.High); - REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.Low, - pDevice->RxStdBdPhy.Low); - REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.u.MaxLen_Flags, - MAX_STD_RCV_BUFFER_SIZE << 16); - - /* Initialize the Jumbo Receive RCB. */ - REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags, - T3_RCB_FLAG_RING_DISABLED); -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.High, - pDevice->RxJumboBdPhy.High); - REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.Low, - pDevice->RxJumboBdPhy.Low); - - REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags, 0); - -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - /* Initialize the Mini Receive RCB. */ - REG_WR (pDevice, RcvDataBdIn.MiniRcvRcb.u.MaxLen_Flags, - T3_RCB_FLAG_RING_DISABLED); - - { - REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.NicRingAddr, - (LM_UINT32) T3_NIC_STD_RCV_BUFFER_DESC_ADDR); - REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.NicRingAddr, - (LM_UINT32) T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR); - } - - /* Receive BD Ring replenish threshold. */ - REG_WR (pDevice, RcvBdIn.StdRcvThreshold, pDevice->RxStdDescCnt / 8); -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - REG_WR (pDevice, RcvBdIn.JumboRcvThreshold, - pDevice->RxJumboDescCnt / 8); -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - /* Disable all the unused rings. */ - for (j = 0; j < T3_MAX_SEND_RCB_COUNT; j++) { - MEM_WR (pDevice, SendRcb[j].u.MaxLen_Flags, - T3_RCB_FLAG_RING_DISABLED); - } /* for */ - - /* Initialize the indices. */ - pDevice->SendProdIdx = 0; - pDevice->SendConIdx = 0; - - MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, 0); - MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, 0); - - /* Set up host or NIC based send RCB. */ - if (pDevice->NicSendBd == FALSE) { - MEM_WR (pDevice, SendRcb[0].HostRingAddr.High, - pDevice->SendBdPhy.High); - MEM_WR (pDevice, SendRcb[0].HostRingAddr.Low, - pDevice->SendBdPhy.Low); - - /* Set up the NIC ring address in the RCB. */ - MEM_WR (pDevice, SendRcb[0].NicRingAddr, - T3_NIC_SND_BUFFER_DESC_ADDR); - - /* Setup the RCB. */ - MEM_WR (pDevice, SendRcb[0].u.MaxLen_Flags, - T3_SEND_RCB_ENTRY_COUNT << 16); - - for (k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) { - pDevice->pSendBdVirt[k].HostAddr.High = 0; - pDevice->pSendBdVirt[k].HostAddr.Low = 0; - } - } else { - MEM_WR (pDevice, SendRcb[0].HostRingAddr.High, 0); - MEM_WR (pDevice, SendRcb[0].HostRingAddr.Low, 0); - MEM_WR (pDevice, SendRcb[0].NicRingAddr, - pDevice->SendBdPhy.Low); - - for (k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) { - __raw_writel (0, - &(pDevice->pSendBdVirt[k].HostAddr.High)); - __raw_writel (0, - &(pDevice->pSendBdVirt[k].HostAddr.Low)); - __raw_writel (0, - &(pDevice->pSendBdVirt[k].u1.Len_Flags)); - pDevice->ShadowSendBd[k].HostAddr.High = 0; - pDevice->ShadowSendBd[k].u1.Len_Flags = 0; - } - } - atomic_set (&pDevice->SendBdLeft, T3_SEND_RCB_ENTRY_COUNT - 1); - - /* Configure the receive return rings. */ - for (j = 0; j < T3_MAX_RCV_RETURN_RCB_COUNT; j++) { - MEM_WR (pDevice, RcvRetRcb[j].u.MaxLen_Flags, - T3_RCB_FLAG_RING_DISABLED); - } - - pDevice->RcvRetConIdx = 0; - - MEM_WR (pDevice, RcvRetRcb[0].HostRingAddr.High, - pDevice->RcvRetBdPhy.High); - MEM_WR (pDevice, RcvRetRcb[0].HostRingAddr.Low, - pDevice->RcvRetBdPhy.Low); - - /* Set up the NIC ring address in the RCB. */ - /* Not very clear from the spec. I am guessing that for Receive */ - /* Return Ring, NicRingAddr is not used. */ - MEM_WR (pDevice, RcvRetRcb[0].NicRingAddr, 0); - - /* Setup the RCB. */ - MEM_WR (pDevice, RcvRetRcb[0].u.MaxLen_Flags, - T3_RCV_RETURN_RCB_ENTRY_COUNT << 16); - - /* Reinitialize RX ring producer index */ - MB_REG_WR (pDevice, Mailbox.RcvStdProdIdx.Low, 0); - MB_REG_WR (pDevice, Mailbox.RcvJumboProdIdx.Low, 0); - MB_REG_WR (pDevice, Mailbox.RcvMiniProdIdx.Low, 0); - -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - pDevice->RxJumboProdIdx = 0; - pDevice->RxJumboQueuedCnt = 0; -#endif - - /* Reinitialize our copy of the indices. */ - pDevice->RxStdProdIdx = 0; - pDevice->RxStdQueuedCnt = 0; - -#if T3_JUMBO_RCV_ENTRY_COUNT - pDevice->RxJumboProdIdx = 0; -#endif /* T3_JUMBO_RCV_ENTRY_COUNT */ - - /* Configure the MAC address. */ - LM_SetMacAddress (pDevice); - - /* Initialize the transmit random backoff seed. */ - Value32 = (pDevice->NodeAddress[0] + pDevice->NodeAddress[1] + - pDevice->NodeAddress[2] + pDevice->NodeAddress[3] + - pDevice->NodeAddress[4] + pDevice->NodeAddress[5]) & - MAC_TX_BACKOFF_SEED_MASK; - REG_WR (pDevice, MacCtrl.TxBackoffSeed, Value32); - - /* Receive MTU. Frames larger than the MTU is marked as oversized. */ - REG_WR (pDevice, MacCtrl.MtuSize, pDevice->RxMtu + 8); /* CRC + VLAN. */ - - /* Configure Time slot/IPG per 802.3 */ - REG_WR (pDevice, MacCtrl.TxLengths, 0x2620); - - /* - * Configure Receive Rules so that packets don't match - * Programmble rule will be queued to Return Ring 1 - */ - REG_WR (pDevice, MacCtrl.RcvRuleCfg, RX_RULE_DEFAULT_CLASS); - - /* - * Configure to have 16 Classes of Services (COS) and one - * queue per class. Bad frames are queued to RRR#1. - * And frames don't match rules are also queued to COS#1. - */ - REG_WR (pDevice, RcvListPlmt.Config, 0x181); - - /* Enable Receive Placement Statistics */ - REG_WR (pDevice, RcvListPlmt.StatsEnableMask, 0xffffff); - REG_WR (pDevice, RcvListPlmt.StatsCtrl, RCV_LIST_STATS_ENABLE); - - /* Enable Send Data Initator Statistics */ - REG_WR (pDevice, SndDataIn.StatsEnableMask, 0xffffff); - REG_WR (pDevice, SndDataIn.StatsCtrl, - T3_SND_DATA_IN_STATS_CTRL_ENABLE | - T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE); - - /* Disable the host coalescing state machine before configuring it's */ - /* parameters. */ - REG_WR (pDevice, HostCoalesce.Mode, 0); - for (j = 0; j < 2000; j++) { - Value32 = REG_RD (pDevice, HostCoalesce.Mode); - if (!(Value32 & HOST_COALESCE_ENABLE)) { - break; - } - MM_Wait (10); - } - - /* Host coalescing configurations. */ - REG_WR (pDevice, HostCoalesce.RxCoalescingTicks, - pDevice->RxCoalescingTicks); - REG_WR (pDevice, HostCoalesce.TxCoalescingTicks, - pDevice->TxCoalescingTicks); - REG_WR (pDevice, HostCoalesce.RxMaxCoalescedFrames, - pDevice->RxMaxCoalescedFrames); - REG_WR (pDevice, HostCoalesce.TxMaxCoalescedFrames, - pDevice->TxMaxCoalescedFrames); - REG_WR (pDevice, HostCoalesce.RxCoalescedTickDuringInt, - pDevice->RxCoalescingTicksDuringInt); - REG_WR (pDevice, HostCoalesce.TxCoalescedTickDuringInt, - pDevice->TxCoalescingTicksDuringInt); - REG_WR (pDevice, HostCoalesce.RxMaxCoalescedFramesDuringInt, - pDevice->RxMaxCoalescedFramesDuringInt); - REG_WR (pDevice, HostCoalesce.TxMaxCoalescedFramesDuringInt, - pDevice->TxMaxCoalescedFramesDuringInt); - - /* Initialize the address of the status block. The NIC will DMA */ - /* the status block to this memory which resides on the host. */ - REG_WR (pDevice, HostCoalesce.StatusBlkHostAddr.High, - pDevice->StatusBlkPhy.High); - REG_WR (pDevice, HostCoalesce.StatusBlkHostAddr.Low, - pDevice->StatusBlkPhy.Low); - - /* Initialize the address of the statistics block. The NIC will DMA */ - /* the statistics to this block of memory. */ - REG_WR (pDevice, HostCoalesce.StatsBlkHostAddr.High, - pDevice->StatsBlkPhy.High); - REG_WR (pDevice, HostCoalesce.StatsBlkHostAddr.Low, - pDevice->StatsBlkPhy.Low); - - REG_WR (pDevice, HostCoalesce.StatsCoalescingTicks, - pDevice->StatsCoalescingTicks); - - REG_WR (pDevice, HostCoalesce.StatsBlkNicAddr, 0x300); - REG_WR (pDevice, HostCoalesce.StatusBlkNicAddr, 0xb00); - - /* Enable Host Coalesing state machine */ - REG_WR (pDevice, HostCoalesce.Mode, HOST_COALESCE_ENABLE | - pDevice->CoalesceMode); - - /* Enable the Receive BD Completion state machine. */ - REG_WR (pDevice, RcvBdComp.Mode, RCV_BD_COMP_MODE_ENABLE | - RCV_BD_COMP_MODE_ATTN_ENABLE); - - /* Enable the Receive List Placement state machine. */ - REG_WR (pDevice, RcvListPlmt.Mode, RCV_LIST_PLMT_MODE_ENABLE); - - /* Enable the Receive List Selector state machine. */ - REG_WR (pDevice, RcvListSel.Mode, RCV_LIST_SEL_MODE_ENABLE | - RCV_LIST_SEL_MODE_ATTN_ENABLE); - - /* Enable transmit DMA, clear statistics. */ - pDevice->MacMode = MAC_MODE_ENABLE_TX_STATISTICS | - MAC_MODE_ENABLE_RX_STATISTICS | MAC_MODE_ENABLE_TDE | - MAC_MODE_ENABLE_RDE | MAC_MODE_ENABLE_FHDE; - REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode | - MAC_MODE_CLEAR_RX_STATISTICS | MAC_MODE_CLEAR_TX_STATISTICS); - - /* GRC miscellaneous local control register. */ - pDevice->GrcLocalCtrl = GRC_MISC_LOCAL_CTRL_INT_ON_ATTN | - GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM; - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - pDevice->GrcLocalCtrl |= GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1; - } - - REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl); - MM_Wait (40); - - /* Reset RX counters. */ - for (j = 0; j < sizeof (LM_RX_COUNTERS); j++) { - ((PLM_UINT8) & pDevice->RxCounters)[j] = 0; - } - - /* Reset TX counters. */ - for (j = 0; j < sizeof (LM_TX_COUNTERS); j++) { - ((PLM_UINT8) & pDevice->TxCounters)[j] = 0; - } - - MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 0); - - /* Enable the DMA Completion state machine. */ - REG_WR (pDevice, DmaComp.Mode, DMA_COMP_MODE_ENABLE); - - /* Enable the DMA Write state machine. */ - Value32 = DMA_WRITE_MODE_ENABLE | - DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE | - DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE | - DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE | - DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE | - DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE | - DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE | - DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE | - DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE; - REG_WR (pDevice, DmaWrite.Mode, Value32); - - if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) { - if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) { - Value16 = REG_RD (pDevice, PciCfg.PciXCommand); - Value16 &= - ~(PCIX_CMD_MAX_SPLIT_MASK | - PCIX_CMD_MAX_BURST_MASK); - Value16 |= - ((PCIX_CMD_MAX_BURST_CPIOB << - PCIX_CMD_MAX_BURST_SHL) & - PCIX_CMD_MAX_BURST_MASK); - if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE) { - Value16 |= - (pDevice-> - SplitModeMaxReq << PCIX_CMD_MAX_SPLIT_SHL) - & PCIX_CMD_MAX_SPLIT_MASK; - } - REG_WR (pDevice, PciCfg.PciXCommand, Value16); - } - } - - /* Enable the Read DMA state machine. */ - Value32 = DMA_READ_MODE_ENABLE | - DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE | - DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE | - DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE | - DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE | - DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE | - DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE | - DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE | - DMA_READ_MODE_LONG_READ_ATTN_ENABLE; - - if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE) { - Value32 |= DMA_READ_MODE_SPLIT_ENABLE; - } - REG_WR (pDevice, DmaRead.Mode, Value32); - - /* Enable the Receive Data Completion state machine. */ - REG_WR (pDevice, RcvDataComp.Mode, RCV_DATA_COMP_MODE_ENABLE | - RCV_DATA_COMP_MODE_ATTN_ENABLE); - - /* Enable the Mbuf Cluster Free state machine. */ - REG_WR (pDevice, MbufClusterFree.Mode, MBUF_CLUSTER_FREE_MODE_ENABLE); - - /* Enable the Send Data Completion state machine. */ - REG_WR (pDevice, SndDataComp.Mode, SND_DATA_COMP_MODE_ENABLE); - - /* Enable the Send BD Completion state machine. */ - REG_WR (pDevice, SndBdComp.Mode, SND_BD_COMP_MODE_ENABLE | - SND_BD_COMP_MODE_ATTN_ENABLE); - - /* Enable the Receive BD Initiator state machine. */ - REG_WR (pDevice, RcvBdIn.Mode, RCV_BD_IN_MODE_ENABLE | - RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE); - - /* Enable the Receive Data and Receive BD Initiator state machine. */ - REG_WR (pDevice, RcvDataBdIn.Mode, RCV_DATA_BD_IN_MODE_ENABLE | - RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE); - - /* Enable the Send Data Initiator state machine. */ - REG_WR (pDevice, SndDataIn.Mode, T3_SND_DATA_IN_MODE_ENABLE); - - /* Enable the Send BD Initiator state machine. */ - REG_WR (pDevice, SndBdIn.Mode, SND_BD_IN_MODE_ENABLE | - SND_BD_IN_MODE_ATTN_ENABLE); - - /* Enable the Send BD Selector state machine. */ - REG_WR (pDevice, SndBdSel.Mode, SND_BD_SEL_MODE_ENABLE | - SND_BD_SEL_MODE_ATTN_ENABLE); - -#if INCLUDE_5701_AX_FIX - /* Load the firmware for the 5701_A0 workaround. */ - if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0) { - LM_LoadRlsFirmware (pDevice); - } -#endif - - /* Enable the transmitter. */ - pDevice->TxMode = TX_MODE_ENABLE; - REG_WR (pDevice, MacCtrl.TxMode, pDevice->TxMode); - - /* Enable the receiver. */ - pDevice->RxMode = RX_MODE_ENABLE; - REG_WR (pDevice, MacCtrl.RxMode, pDevice->RxMode); - - if (pDevice->RestoreOnWakeUp) { - pDevice->RestoreOnWakeUp = FALSE; - pDevice->DisableAutoNeg = pDevice->WakeUpDisableAutoNeg; - pDevice->RequestedMediaType = pDevice->WakeUpRequestedMediaType; - } - - /* Disable auto polling. */ - pDevice->MiMode = 0xc0000; - REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode); - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Value32 = LED_CTRL_PHY_MODE_1; - } else { - if (pDevice->LedMode == LED_MODE_OUTPUT) { - Value32 = LED_CTRL_PHY_MODE_2; - } else { - Value32 = LED_CTRL_PHY_MODE_1; - } - } - REG_WR (pDevice, MacCtrl.LedCtrl, Value32); - - /* Activate Link to enable MAC state machine */ - REG_WR (pDevice, MacCtrl.MiStatus, MI_STATUS_ENABLE_LINK_STATUS_ATTN); - - if (pDevice->EnableTbi) { - REG_WR (pDevice, MacCtrl.RxMode, RX_MODE_RESET); - MM_Wait (10); - REG_WR (pDevice, MacCtrl.RxMode, pDevice->RxMode); - if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1) { - REG_WR (pDevice, MacCtrl.SerdesCfg, 0x616000); - } - } - /* Setup the phy chip. */ - LM_SetupPhy (pDevice); - - if (!pDevice->EnableTbi) { - /* Clear CRC stats */ - LM_ReadPhy (pDevice, 0x1e, &Value32); - LM_WritePhy (pDevice, 0x1e, Value32 | 0x8000); - LM_ReadPhy (pDevice, 0x14, &Value32); - } - - /* Set up the receive mask. */ - LM_SetReceiveMask (pDevice, pDevice->ReceiveMask); - - /* Queue Rx packet buffers. */ - if (pDevice->QueueRxPackets) { - LM_QueueRxPackets (pDevice); - } - - /* Enable interrupt to the host. */ - if (pDevice->InitDone) { - LM_EnableInterrupt (pDevice); - } - - return LM_STATUS_SUCCESS; -} /* LM_ResetAdapter */ - -/******************************************************************************/ -/* Description: */ -/* This routine disables the adapter from generating interrupts. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS LM_DisableInterrupt (PLM_DEVICE_BLOCK pDevice) -{ - REG_WR (pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl | - MISC_HOST_CTRL_MASK_PCI_INT); - MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 1); - - return LM_STATUS_SUCCESS; -} - -/******************************************************************************/ -/* Description: */ -/* This routine enables the adapter to generate interrupts. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS LM_EnableInterrupt (PLM_DEVICE_BLOCK pDevice) -{ - REG_WR (pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl & - ~MISC_HOST_CTRL_MASK_PCI_INT); - MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 0); - - if (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) { - REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_SET_INT); - } - - return LM_STATUS_SUCCESS; -} - -/******************************************************************************/ -/* Description: */ -/* This routine puts a packet on the wire if there is a transmit DMA */ -/* descriptor available; otherwise the packet is queued for later */ -/* transmission. If the second argue is NULL, this routine will put */ -/* the queued packet on the wire if possible. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -#if 0 -LM_STATUS LM_SendPacket (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) -{ - LM_UINT32 FragCount; - PT3_SND_BD pSendBd; - PT3_SND_BD pShadowSendBd; - LM_UINT32 Value32, Len; - LM_UINT32 Idx; - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - return LM_5700SendPacket (pDevice, pPacket); - } - - /* Update the SendBdLeft count. */ - atomic_sub (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft); - - /* Initalize the send buffer descriptors. */ - Idx = pDevice->SendProdIdx; - - pSendBd = &pDevice->pSendBdVirt[Idx]; - - /* Next producer index. */ - if (pDevice->NicSendBd == TRUE) { - T3_64BIT_HOST_ADDR paddr; - - pShadowSendBd = &pDevice->ShadowSendBd[Idx]; - for (FragCount = 0;;) { - MM_MapTxDma (pDevice, pPacket, &paddr, &Len, FragCount); - /* Initialize the pointer to the send buffer fragment. */ - if (paddr.High != pShadowSendBd->HostAddr.High) { - __raw_writel (paddr.High, - &(pSendBd->HostAddr.High)); - pShadowSendBd->HostAddr.High = paddr.High; - } - __raw_writel (paddr.Low, &(pSendBd->HostAddr.Low)); - - /* Setup the control flags and send buffer size. */ - Value32 = (Len << 16) | pPacket->Flags; - - Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - - FragCount++; - if (FragCount >= pPacket->u.Tx.FragCount) { - Value32 |= SND_BD_FLAG_END; - if (Value32 != pShadowSendBd->u1.Len_Flags) { - __raw_writel (Value32, - &(pSendBd->u1.Len_Flags)); - pShadowSendBd->u1.Len_Flags = Value32; - } - if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) { - __raw_writel (pPacket->VlanTag, - &(pSendBd->u2.VlanTag)); - } - break; - } else { - if (Value32 != pShadowSendBd->u1.Len_Flags) { - __raw_writel (Value32, - &(pSendBd->u1.Len_Flags)); - pShadowSendBd->u1.Len_Flags = Value32; - } - if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) { - __raw_writel (pPacket->VlanTag, - &(pSendBd->u2.VlanTag)); - } - } - - pSendBd++; - pShadowSendBd++; - if (Idx == 0) { - pSendBd = &pDevice->pSendBdVirt[0]; - pShadowSendBd = &pDevice->ShadowSendBd[0]; - } - } /* for */ - - /* Put the packet descriptor in the ActiveQ. */ - QQ_PushTail (&pDevice->TxPacketActiveQ.Container, pPacket); - - wmb (); - MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, Idx); - - } else { - for (FragCount = 0;;) { - /* Initialize the pointer to the send buffer fragment. */ - MM_MapTxDma (pDevice, pPacket, &pSendBd->HostAddr, &Len, - FragCount); - - pSendBd->u2.VlanTag = pPacket->VlanTag; - - /* Setup the control flags and send buffer size. */ - Value32 = (Len << 16) | pPacket->Flags; - - Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - - FragCount++; - if (FragCount >= pPacket->u.Tx.FragCount) { - pSendBd->u1.Len_Flags = - Value32 | SND_BD_FLAG_END; - break; - } else { - pSendBd->u1.Len_Flags = Value32; - } - pSendBd++; - if (Idx == 0) { - pSendBd = &pDevice->pSendBdVirt[0]; - } - } /* for */ - - /* Put the packet descriptor in the ActiveQ. */ - QQ_PushTail (&pDevice->TxPacketActiveQ.Container, pPacket); - - wmb (); - MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, Idx); - - } - - /* Update the producer index. */ - pDevice->SendProdIdx = Idx; - - return LM_STATUS_SUCCESS; -} -#endif - -LM_STATUS LM_SendPacket (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) -{ - LM_UINT32 FragCount; - PT3_SND_BD pSendBd, pTmpSendBd, pShadowSendBd; - T3_SND_BD NicSendBdArr[MAX_FRAGMENT_COUNT]; - LM_UINT32 StartIdx, Idx; - - while (1) { - /* Initalize the send buffer descriptors. */ - StartIdx = Idx = pDevice->SendProdIdx; - - if (pDevice->NicSendBd) { - pTmpSendBd = pSendBd = &NicSendBdArr[0]; - } else { - pTmpSendBd = pSendBd = &pDevice->pSendBdVirt[Idx]; - } - - /* Next producer index. */ - for (FragCount = 0;;) { - LM_UINT32 Value32, Len; - - /* Initialize the pointer to the send buffer fragment. */ - MM_MapTxDma (pDevice, pPacket, &pSendBd->HostAddr, &Len, - FragCount); - - pSendBd->u2.VlanTag = pPacket->VlanTag; - - /* Setup the control flags and send buffer size. */ - Value32 = (Len << 16) | pPacket->Flags; - - Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - - FragCount++; - if (FragCount >= pPacket->u.Tx.FragCount) { - pSendBd->u1.Len_Flags = - Value32 | SND_BD_FLAG_END; - break; - } else { - pSendBd->u1.Len_Flags = Value32; - } - pSendBd++; - if ((Idx == 0) && !pDevice->NicSendBd) { - pSendBd = &pDevice->pSendBdVirt[0]; - } - } /* for */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - if (LM_Test4GBoundary (pDevice, pPacket, pTmpSendBd) == - LM_STATUS_SUCCESS) { - if (MM_CoalesceTxBuffer (pDevice, pPacket) != - LM_STATUS_SUCCESS) { - QQ_PushHead (&pDevice->TxPacketFreeQ. - Container, pPacket); - return LM_STATUS_FAILURE; - } - continue; - } - } - break; - } - /* Put the packet descriptor in the ActiveQ. */ - QQ_PushTail (&pDevice->TxPacketActiveQ.Container, pPacket); - - if (pDevice->NicSendBd) { - pSendBd = &pDevice->pSendBdVirt[StartIdx]; - pShadowSendBd = &pDevice->ShadowSendBd[StartIdx]; - - while (StartIdx != Idx) { - LM_UINT32 Value32; - - if ((Value32 = pTmpSendBd->HostAddr.High) != - pShadowSendBd->HostAddr.High) { - __raw_writel (Value32, - &(pSendBd->HostAddr.High)); - pShadowSendBd->HostAddr.High = Value32; - } - - __raw_writel (pTmpSendBd->HostAddr.Low, - &(pSendBd->HostAddr.Low)); - - if ((Value32 = pTmpSendBd->u1.Len_Flags) != - pShadowSendBd->u1.Len_Flags) { - __raw_writel (Value32, - &(pSendBd->u1.Len_Flags)); - pShadowSendBd->u1.Len_Flags = Value32; - } - - if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) { - __raw_writel (pTmpSendBd->u2.VlanTag, - &(pSendBd->u2.VlanTag)); - } - - StartIdx = - (StartIdx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - if (StartIdx == 0) - pSendBd = &pDevice->pSendBdVirt[0]; - else - pSendBd++; - pTmpSendBd++; - } - wmb (); - MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, Idx); - - if (T3_CHIP_REV (pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) { - MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, Idx); - } - } else { - wmb (); - MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, Idx); - - if (T3_CHIP_REV (pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) { - MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, - Idx); - } - } - - /* Update the SendBdLeft count. */ - atomic_sub (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft); - - /* Update the producer index. */ - pDevice->SendProdIdx = Idx; - - return LM_STATUS_SUCCESS; -} - -STATIC LM_STATUS -LM_Test4GBoundary (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket, - PT3_SND_BD pSendBd) -{ - int FragCount; - LM_UINT32 Idx, Base, Len; - - Idx = pDevice->SendProdIdx; - for (FragCount = 0;;) { - Len = pSendBd->u1.Len_Flags >> 16; - if (((Base = pSendBd->HostAddr.Low) > 0xffffdcc0) && - (pSendBd->HostAddr.High == 0) && - ((Base + 8 + Len) < Base)) { - return LM_STATUS_SUCCESS; - } - FragCount++; - if (FragCount >= pPacket->u.Tx.FragCount) { - break; - } - pSendBd++; - if (!pDevice->NicSendBd) { - Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK; - if (Idx == 0) { - pSendBd = &pDevice->pSendBdVirt[0]; - } - } - } - return LM_STATUS_FAILURE; -} - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -__inline static unsigned long -ComputeCrc32 (unsigned char *pBuffer, unsigned long BufferSize) -{ - unsigned long Reg; - unsigned long Tmp; - unsigned long j, k; - - Reg = 0xffffffff; - - for (j = 0; j < BufferSize; j++) { - Reg ^= pBuffer[j]; - - for (k = 0; k < 8; k++) { - Tmp = Reg & 0x01; - - Reg >>= 1; - - if (Tmp) { - Reg ^= 0xedb88320; - } - } - } - - return ~Reg; -} /* ComputeCrc32 */ - -/******************************************************************************/ -/* Description: */ -/* This routine sets the receive control register according to ReceiveMask */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS LM_SetReceiveMask (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask) -{ - LM_UINT32 ReceiveMask; - LM_UINT32 RxMode; - LM_UINT32 j, k; - - ReceiveMask = Mask; - - RxMode = pDevice->RxMode; - - if (Mask & LM_ACCEPT_UNICAST) { - Mask &= ~LM_ACCEPT_UNICAST; - } - - if (Mask & LM_ACCEPT_MULTICAST) { - Mask &= ~LM_ACCEPT_MULTICAST; - } - - if (Mask & LM_ACCEPT_ALL_MULTICAST) { - Mask &= ~LM_ACCEPT_ALL_MULTICAST; - } - - if (Mask & LM_ACCEPT_BROADCAST) { - Mask &= ~LM_ACCEPT_BROADCAST; - } - - RxMode &= ~RX_MODE_PROMISCUOUS_MODE; - if (Mask & LM_PROMISCUOUS_MODE) { - RxMode |= RX_MODE_PROMISCUOUS_MODE; - Mask &= ~LM_PROMISCUOUS_MODE; - } - - RxMode &= ~(RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED); - if (Mask & LM_ACCEPT_ERROR_PACKET) { - RxMode |= RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED; - Mask &= ~LM_ACCEPT_ERROR_PACKET; - } - - /* Make sure all the bits are valid before committing changes. */ - if (Mask) { - return LM_STATUS_FAILURE; - } - - /* Commit the new filter. */ - pDevice->RxMode = RxMode; - REG_WR (pDevice, MacCtrl.RxMode, RxMode); - - pDevice->ReceiveMask = ReceiveMask; - - /* Set up the MC hash table. */ - if (ReceiveMask & LM_ACCEPT_ALL_MULTICAST) { - for (k = 0; k < 4; k++) { - REG_WR (pDevice, MacCtrl.HashReg[k], 0xffffffff); - } - } else if (ReceiveMask & LM_ACCEPT_MULTICAST) { - LM_UINT32 HashReg[4]; - - HashReg[0] = 0; - HashReg[1] = 0; - HashReg[2] = 0; - HashReg[3] = 0; - for (j = 0; j < pDevice->McEntryCount; j++) { - LM_UINT32 RegIndex; - LM_UINT32 Bitpos; - LM_UINT32 Crc32; - - Crc32 = - ComputeCrc32 (pDevice->McTable[j], - ETHERNET_ADDRESS_SIZE); - - /* The most significant 7 bits of the CRC32 (no inversion), */ - /* are used to index into one of the possible 128 bit positions. */ - Bitpos = ~Crc32 & 0x7f; - - /* Hash register index. */ - RegIndex = (Bitpos & 0x60) >> 5; - - /* Bit to turn on within a hash register. */ - Bitpos &= 0x1f; - - /* Enable the multicast bit. */ - HashReg[RegIndex] |= (1 << Bitpos); - } - - /* REV_AX has problem with multicast filtering where it uses both */ - /* DA and SA to perform hashing. */ - for (k = 0; k < 4; k++) { - REG_WR (pDevice, MacCtrl.HashReg[k], HashReg[k]); - } - } else { - /* Reject all multicast frames. */ - for (j = 0; j < 4; j++) { - REG_WR (pDevice, MacCtrl.HashReg[j], 0); - } - } - - /* By default, Tigon3 will accept broadcast frames. We need to setup */ - if (ReceiveMask & LM_ACCEPT_BROADCAST) { - REG_WR (pDevice, - MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule, - REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK); - REG_WR (pDevice, - MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value, - REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK); - REG_WR (pDevice, - MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule, - REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK); - REG_WR (pDevice, - MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value, - REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK); - } else { - REG_WR (pDevice, - MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule, - REJECT_BROADCAST_RULE1_RULE); - REG_WR (pDevice, - MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value, - REJECT_BROADCAST_RULE1_VALUE); - REG_WR (pDevice, - MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule, - REJECT_BROADCAST_RULE2_RULE); - REG_WR (pDevice, - MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value, - REJECT_BROADCAST_RULE2_VALUE); - } - - /* disable the rest of the rules. */ - for (j = RCV_LAST_RULE_IDX; j < 16; j++) { - REG_WR (pDevice, MacCtrl.RcvRules[j].Rule, 0); - REG_WR (pDevice, MacCtrl.RcvRules[j].Value, 0); - } - - return LM_STATUS_SUCCESS; -} /* LM_SetReceiveMask */ - -/******************************************************************************/ -/* Description: */ -/* Disable the interrupt and put the transmitter and receiver engines in */ -/* an idle state. Also aborts all pending send requests and receive */ -/* buffers. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS LM_Abort (PLM_DEVICE_BLOCK pDevice) -{ - PLM_PACKET pPacket; - LM_UINT Idx; - - LM_DisableInterrupt (pDevice); - - /* Disable all the state machines. */ - LM_CntrlBlock (pDevice, T3_BLOCK_MAC_RX_ENGINE, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_RX_BD_INITIATOR, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_RX_LIST_PLMT, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_RX_LIST_SELECTOR, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_RX_DATA_INITIATOR, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_RX_DATA_COMP, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_RX_BD_COMP, LM_DISABLE); - - LM_CntrlBlock (pDevice, T3_BLOCK_SEND_BD_SELECTOR, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_SEND_BD_INITIATOR, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_SEND_DATA_INITIATOR, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_DMA_RD, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_SEND_DATA_COMP, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_DMA_COMP, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_SEND_BD_COMP, LM_DISABLE); - - /* Clear TDE bit */ - pDevice->MacMode &= ~MAC_MODE_ENABLE_TDE; - REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode); - - LM_CntrlBlock (pDevice, T3_BLOCK_MAC_TX_ENGINE, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_HOST_COALESING, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_DMA_WR, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_MBUF_CLUSTER_FREE, LM_DISABLE); - - /* Reset all FTQs */ - REG_WR (pDevice, Ftq.Reset, 0xffffffff); - REG_WR (pDevice, Ftq.Reset, 0x0); - - LM_CntrlBlock (pDevice, T3_BLOCK_MBUF_MANAGER, LM_DISABLE); - LM_CntrlBlock (pDevice, T3_BLOCK_MEM_ARBITOR, LM_DISABLE); - - MM_ACQUIRE_INT_LOCK (pDevice); - - /* Abort packets that have already queued to go out. */ - pPacket = (PLM_PACKET) QQ_PopHead (&pDevice->TxPacketActiveQ.Container); - while (pPacket) { - - pPacket->PacketStatus = LM_STATUS_TRANSMIT_ABORTED; - pDevice->TxCounters.TxPacketAbortedCnt++; - - atomic_add (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft); - - QQ_PushTail (&pDevice->TxPacketXmittedQ.Container, pPacket); - - pPacket = (PLM_PACKET) - QQ_PopHead (&pDevice->TxPacketActiveQ.Container); - } - - /* Cleanup the receive return rings. */ - LM_ServiceRxInterrupt (pDevice); - - /* Don't want to indicate rx packets in Ndis miniport shutdown context. */ - /* Doing so may cause system crash. */ - if (!pDevice->ShuttingDown) { - /* Indicate packets to the protocol. */ - MM_IndicateTxPackets (pDevice); - - /* Indicate received packets to the protocols. */ - MM_IndicateRxPackets (pDevice); - } else { - /* Move the receive packet descriptors in the ReceivedQ to the */ - /* free queue. */ - for (;;) { - pPacket = - (PLM_PACKET) QQ_PopHead (&pDevice-> - RxPacketReceivedQ. - Container); - if (pPacket == NULL) { - break; - } - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, - pPacket); - } - } - - /* Clean up the Std Receive Producer ring. */ - Idx = pDevice->pStatusBlkVirt->RcvStdConIdx; - - while (Idx != pDevice->RxStdProdIdx) { - pPacket = (PLM_PACKET) (MM_UINT_PTR (pDevice->pPacketDescBase) + - MM_UINT_PTR (pDevice->pRxStdBdVirt[Idx]. - Opaque)); - - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket); - - Idx = (Idx + 1) & T3_STD_RCV_RCB_ENTRY_COUNT_MASK; - } /* while */ - - /* Reinitialize our copy of the indices. */ - pDevice->RxStdProdIdx = 0; - -#if T3_JUMBO_RCV_RCB_ENTRY_COUNT - /* Clean up the Jumbo Receive Producer ring. */ - Idx = pDevice->pStatusBlkVirt->RcvJumboConIdx; - - while (Idx != pDevice->RxJumboProdIdx) { - pPacket = (PLM_PACKET) (MM_UINT_PTR (pDevice->pPacketDescBase) + - MM_UINT_PTR (pDevice-> - pRxJumboBdVirt[Idx]. - Opaque)); - - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket); - - Idx = (Idx + 1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK; - } /* while */ - - /* Reinitialize our copy of the indices. */ - pDevice->RxJumboProdIdx = 0; -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ - - MM_RELEASE_INT_LOCK (pDevice); - - /* Initialize the statistis Block */ - pDevice->pStatusBlkVirt->Status = 0; - pDevice->pStatusBlkVirt->RcvStdConIdx = 0; - pDevice->pStatusBlkVirt->RcvJumboConIdx = 0; - pDevice->pStatusBlkVirt->RcvMiniConIdx = 0; - - return LM_STATUS_SUCCESS; -} /* LM_Abort */ - -/******************************************************************************/ -/* Description: */ -/* Disable the interrupt and put the transmitter and receiver engines in */ -/* an idle state. Aborts all pending send requests and receive buffers. */ -/* Also free all the receive buffers. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS LM_Halt (PLM_DEVICE_BLOCK pDevice) -{ - PLM_PACKET pPacket; - LM_UINT32 EntryCnt; - - LM_Abort (pDevice); - - /* Get the number of entries in the queue. */ - EntryCnt = QQ_GetEntryCnt (&pDevice->RxPacketFreeQ.Container); - - /* Make sure all the packets have been accounted for. */ - for (EntryCnt = 0; EntryCnt < pDevice->RxPacketDescCnt; EntryCnt++) { - pPacket = - (PLM_PACKET) QQ_PopHead (&pDevice->RxPacketFreeQ.Container); - if (pPacket == 0) - break; - - MM_FreeRxBuffer (pDevice, pPacket); - - QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket); - } - - LM_ResetChip (pDevice); - - /* Restore PCI configuration registers. */ - MM_WriteConfig32 (pDevice, PCI_CACHE_LINE_SIZE_REG, - pDevice->SavedCacheLineReg); - LM_RegWrInd (pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, - (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId); - - /* Reprogram the MAC address. */ - LM_SetMacAddress (pDevice); - - return LM_STATUS_SUCCESS; -} /* LM_Halt */ - -STATIC LM_STATUS LM_ResetChip (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 Value32; - LM_UINT32 j; - - /* Wait for access to the nvram interface before resetting. This is */ - /* a workaround to prevent EEPROM corruption. */ - if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 && - T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5701) { - /* Request access to the flash interface. */ - REG_WR (pDevice, Nvram.SwArb, SW_ARB_REQ_SET1); - - for (j = 0; j < 100000; j++) { - Value32 = REG_RD (pDevice, Nvram.SwArb); - if (Value32 & SW_ARB_GNT1) { - break; - } - MM_Wait (10); - } - } - - /* Global reset. */ - REG_WR (pDevice, Grc.MiscCfg, GRC_MISC_CFG_CORE_CLOCK_RESET); - MM_Wait (40); - MM_Wait (40); - MM_Wait (40); - - /* make sure we re-enable indirect accesses */ - MM_WriteConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG, - pDevice->MiscHostCtrl); - - /* Set MAX PCI retry to zero. */ - Value32 = - T3_PCI_STATE_PCI_ROM_ENABLE | T3_PCI_STATE_PCI_ROM_RETRY_ENABLE; - if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) { - if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) { - Value32 |= T3_PCI_STATE_RETRY_SAME_DMA; - } - } - MM_WriteConfig32 (pDevice, T3_PCI_STATE_REG, Value32); - - /* Restore PCI command register. */ - MM_WriteConfig32 (pDevice, PCI_COMMAND_REG, - pDevice->PciCommandStatusWords); - - /* Disable PCI-X relaxed ordering bit. */ - MM_ReadConfig32 (pDevice, PCIX_CAP_REG, &Value32); - Value32 &= ~PCIX_ENABLE_RELAXED_ORDERING; - MM_WriteConfig32 (pDevice, PCIX_CAP_REG, Value32); - - /* Enable memory arbiter. */ - REG_WR (pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE); - -#ifdef BIG_ENDIAN_PCI /* This from jfd */ - Value32 = GRC_MODE_WORD_SWAP_DATA | GRC_MODE_WORD_SWAP_NON_FRAME_DATA; -#else -#ifdef BIG_ENDIAN_HOST - /* Reconfigure the mode register. */ - Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | - GRC_MODE_WORD_SWAP_NON_FRAME_DATA | - GRC_MODE_BYTE_SWAP_DATA | GRC_MODE_WORD_SWAP_DATA; -#else - /* Reconfigure the mode register. */ - Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA; -#endif -#endif - REG_WR (pDevice, Grc.Mode, Value32); - - /* Prevent PXE from restarting. */ - MEM_WR_OFFSET (pDevice, 0x0b50, T3_MAGIC_NUM); - - if (pDevice->EnableTbi) { - pDevice->MacMode = MAC_MODE_PORT_MODE_TBI; - REG_WR (pDevice, MacCtrl.Mode, MAC_MODE_PORT_MODE_TBI); - } else { - REG_WR (pDevice, MacCtrl.Mode, 0); - } - - /* Wait for the firmware to finish initialization. */ - for (j = 0; j < 100000; j++) { - MM_Wait (10); - - Value32 = MEM_RD_OFFSET (pDevice, 0x0b50); - if (Value32 == ~T3_MAGIC_NUM) { - break; - } - } - return LM_STATUS_SUCCESS; -} - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -__inline static void LM_ServiceTxInterrupt (PLM_DEVICE_BLOCK pDevice) -{ - PLM_PACKET pPacket; - LM_UINT32 HwConIdx; - LM_UINT32 SwConIdx; - - HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx; - - /* Get our copy of the consumer index. The buffer descriptors */ - /* that are in between the consumer indices are freed. */ - SwConIdx = pDevice->SendConIdx; - - /* Move the packets from the TxPacketActiveQ that are sent out to */ - /* the TxPacketXmittedQ. Packets that are sent use the */ - /* descriptors that are between SwConIdx and HwConIdx. */ - while (SwConIdx != HwConIdx) { - /* Get the packet that was sent from the TxPacketActiveQ. */ - pPacket = - (PLM_PACKET) QQ_PopHead (&pDevice->TxPacketActiveQ. - Container); - - /* Set the return status. */ - pPacket->PacketStatus = LM_STATUS_SUCCESS; - - /* Put the packet in the TxPacketXmittedQ for indication later. */ - QQ_PushTail (&pDevice->TxPacketXmittedQ.Container, pPacket); - - /* Move to the next packet's BD. */ - SwConIdx = (SwConIdx + pPacket->u.Tx.FragCount) & - T3_SEND_RCB_ENTRY_COUNT_MASK; - - /* Update the number of unused BDs. */ - atomic_add (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft); - - /* Get the new updated HwConIdx. */ - HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx; - } /* while */ - - /* Save the new SwConIdx. */ - pDevice->SendConIdx = SwConIdx; - -} /* LM_ServiceTxInterrupt */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -__inline static void LM_ServiceRxInterrupt (PLM_DEVICE_BLOCK pDevice) -{ - PLM_PACKET pPacket; - PT3_RCV_BD pRcvBd; - LM_UINT32 HwRcvRetProdIdx; - LM_UINT32 SwRcvRetConIdx; - - /* Loop thru the receive return rings for received packets. */ - HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx; - - SwRcvRetConIdx = pDevice->RcvRetConIdx; - while (SwRcvRetConIdx != HwRcvRetProdIdx) { - pRcvBd = &pDevice->pRcvRetBdVirt[SwRcvRetConIdx]; - - /* Get the received packet descriptor. */ - pPacket = (PLM_PACKET) (MM_UINT_PTR (pDevice->pPacketDescBase) + - MM_UINT_PTR (pRcvBd->Opaque)); - - /* Check the error flag. */ - if (pRcvBd->ErrorFlag && - pRcvBd->ErrorFlag != RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) { - pPacket->PacketStatus = LM_STATUS_FAILURE; - - pDevice->RxCounters.RxPacketErrCnt++; - - if (pRcvBd->ErrorFlag & RCV_BD_ERR_BAD_CRC) { - pDevice->RxCounters.RxErrCrcCnt++; - } - - if (pRcvBd->ErrorFlag & RCV_BD_ERR_COLL_DETECT) { - pDevice->RxCounters.RxErrCollCnt++; - } - - if (pRcvBd->ErrorFlag & RCV_BD_ERR_LINK_LOST_DURING_PKT) { - pDevice->RxCounters.RxErrLinkLostCnt++; - } - - if (pRcvBd->ErrorFlag & RCV_BD_ERR_PHY_DECODE_ERR) { - pDevice->RxCounters.RxErrPhyDecodeCnt++; - } - - if (pRcvBd->ErrorFlag & RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) { - pDevice->RxCounters.RxErrOddNibbleCnt++; - } - - if (pRcvBd->ErrorFlag & RCV_BD_ERR_MAC_ABORT) { - pDevice->RxCounters.RxErrMacAbortCnt++; - } - - if (pRcvBd->ErrorFlag & RCV_BD_ERR_LEN_LT_64) { - pDevice->RxCounters.RxErrShortPacketCnt++; - } - - if (pRcvBd->ErrorFlag & RCV_BD_ERR_TRUNC_NO_RESOURCES) { - pDevice->RxCounters.RxErrNoResourceCnt++; - } - - if (pRcvBd->ErrorFlag & RCV_BD_ERR_GIANT_FRAME_RCVD) { - pDevice->RxCounters.RxErrLargePacketCnt++; - } - } else { - pPacket->PacketStatus = LM_STATUS_SUCCESS; - pPacket->PacketSize = pRcvBd->Len - 4; - - pPacket->Flags = pRcvBd->Flags; - if (pRcvBd->Flags & RCV_BD_FLAG_VLAN_TAG) { - pPacket->VlanTag = pRcvBd->VlanTag; - } - - pPacket->u.Rx.TcpUdpChecksum = pRcvBd->TcpUdpCksum; - } - - /* Put the packet descriptor containing the received packet */ - /* buffer in the RxPacketReceivedQ for indication later. */ - QQ_PushTail (&pDevice->RxPacketReceivedQ.Container, pPacket); - - /* Go to the next buffer descriptor. */ - SwRcvRetConIdx = (SwRcvRetConIdx + 1) & - T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK; - - /* Get the updated HwRcvRetProdIdx. */ - HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx; - } /* while */ - - pDevice->RcvRetConIdx = SwRcvRetConIdx; - - /* Update the receive return ring consumer index. */ - MB_REG_WR (pDevice, Mailbox.RcvRetConIdx[0].Low, SwRcvRetConIdx); -} /* LM_ServiceRxInterrupt */ - -/******************************************************************************/ -/* Description: */ -/* This is the interrupt event handler routine. It acknowledges all */ -/* pending interrupts and process all pending events. */ -/* */ -/* Return: */ -/* LM_STATUS_SUCCESS */ -/******************************************************************************/ -LM_STATUS LM_ServiceInterrupts (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 Value32; - int ServicePhyInt = FALSE; - - /* Setup the phy chip whenever the link status changes. */ - if (pDevice->LinkChngMode == T3_LINK_CHNG_MODE_USE_STATUS_REG) { - Value32 = REG_RD (pDevice, MacCtrl.Status); - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) { - if (Value32 & MAC_STATUS_MI_INTERRUPT) { - ServicePhyInt = TRUE; - } - } else if (Value32 & MAC_STATUS_LINK_STATE_CHANGED) { - ServicePhyInt = TRUE; - } - } else { - if (pDevice->pStatusBlkVirt-> - Status & STATUS_BLOCK_LINK_CHANGED_STATUS) { - pDevice->pStatusBlkVirt->Status = - STATUS_BLOCK_UPDATED | (pDevice->pStatusBlkVirt-> - Status & - ~STATUS_BLOCK_LINK_CHANGED_STATUS); - ServicePhyInt = TRUE; - } - } -#if INCLUDE_TBI_SUPPORT - if (pDevice->IgnoreTbiLinkChange == TRUE) { - ServicePhyInt = FALSE; - } -#endif - if (ServicePhyInt == TRUE) { - LM_SetupPhy (pDevice); - } - - /* Service receive and transmit interrupts. */ - LM_ServiceRxInterrupt (pDevice); - LM_ServiceTxInterrupt (pDevice); - - /* No spinlock for this queue since this routine is serialized. */ - if (!QQ_Empty (&pDevice->RxPacketReceivedQ.Container)) { - /* Indicate receive packets. */ - MM_IndicateRxPackets (pDevice); - /* LM_QueueRxPackets(pDevice); */ - } - - /* No spinlock for this queue since this routine is serialized. */ - if (!QQ_Empty (&pDevice->TxPacketXmittedQ.Container)) { - MM_IndicateTxPackets (pDevice); - } - - return LM_STATUS_SUCCESS; -} /* LM_ServiceInterrupts */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS LM_MulticastAdd (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress) -{ - PLM_UINT8 pEntry; - LM_UINT32 j; - - pEntry = pDevice->McTable[0]; - for (j = 0; j < pDevice->McEntryCount; j++) { - if (IS_ETH_ADDRESS_EQUAL (pEntry, pMcAddress)) { - /* Found a match, increment the instance count. */ - pEntry[LM_MC_INSTANCE_COUNT_INDEX] += 1; - - return LM_STATUS_SUCCESS; - } - - pEntry += LM_MC_ENTRY_SIZE; - } - - if (pDevice->McEntryCount >= LM_MAX_MC_TABLE_SIZE) { - return LM_STATUS_FAILURE; - } - - pEntry = pDevice->McTable[pDevice->McEntryCount]; - - COPY_ETH_ADDRESS (pMcAddress, pEntry); - pEntry[LM_MC_INSTANCE_COUNT_INDEX] = 1; - - pDevice->McEntryCount++; - - LM_SetReceiveMask (pDevice, pDevice->ReceiveMask | LM_ACCEPT_MULTICAST); - - return LM_STATUS_SUCCESS; -} /* LM_MulticastAdd */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS LM_MulticastDel (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress) -{ - PLM_UINT8 pEntry; - LM_UINT32 j; - - pEntry = pDevice->McTable[0]; - for (j = 0; j < pDevice->McEntryCount; j++) { - if (IS_ETH_ADDRESS_EQUAL (pEntry, pMcAddress)) { - /* Found a match, decrement the instance count. */ - pEntry[LM_MC_INSTANCE_COUNT_INDEX] -= 1; - - /* No more instance left, remove the address from the table. */ - /* Move the last entry in the table to the delete slot. */ - if (pEntry[LM_MC_INSTANCE_COUNT_INDEX] == 0 && - pDevice->McEntryCount > 1) { - - COPY_ETH_ADDRESS (pDevice-> - McTable[pDevice-> - McEntryCount - 1], - pEntry); - pEntry[LM_MC_INSTANCE_COUNT_INDEX] = - pDevice->McTable[pDevice->McEntryCount - 1] - [LM_MC_INSTANCE_COUNT_INDEX]; - } - pDevice->McEntryCount--; - - /* Update the receive mask if the table is empty. */ - if (pDevice->McEntryCount == 0) { - LM_SetReceiveMask (pDevice, - pDevice-> - ReceiveMask & - ~LM_ACCEPT_MULTICAST); - } - - return LM_STATUS_SUCCESS; - } - - pEntry += LM_MC_ENTRY_SIZE; - } - - return LM_STATUS_FAILURE; -} /* LM_MulticastDel */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS LM_MulticastClear (PLM_DEVICE_BLOCK pDevice) -{ - pDevice->McEntryCount = 0; - - LM_SetReceiveMask (pDevice, - pDevice->ReceiveMask & ~LM_ACCEPT_MULTICAST); - - return LM_STATUS_SUCCESS; -} /* LM_MulticastClear */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS LM_SetMacAddress (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 j; - PLM_UINT8 pMacAddress = pDevice->NodeAddress; - - for (j = 0; j < 4; j++) { - REG_WR (pDevice, MacCtrl.MacAddr[j].High, - (pMacAddress[0] << 8) | pMacAddress[1]); - REG_WR (pDevice, MacCtrl.MacAddr[j].Low, - (pMacAddress[2] << 24) | (pMacAddress[3] << 16) | - (pMacAddress[4] << 8) | pMacAddress[5]); - } - - return LM_STATUS_SUCCESS; -} - -/******************************************************************************/ -/* Description: */ -/* Sets up the default line speed, and duplex modes based on the requested */ -/* media type. */ -/* */ -/* Return: */ -/* None. */ -/******************************************************************************/ -static LM_STATUS -LM_TranslateRequestedMediaType (LM_REQUESTED_MEDIA_TYPE RequestedMediaType, - PLM_MEDIA_TYPE pMediaType, - PLM_LINE_SPEED pLineSpeed, - PLM_DUPLEX_MODE pDuplexMode) -{ - *pMediaType = LM_MEDIA_TYPE_AUTO; - *pLineSpeed = LM_LINE_SPEED_UNKNOWN; - *pDuplexMode = LM_DUPLEX_MODE_UNKNOWN; - - /* determine media type */ - switch (RequestedMediaType) { - case LM_REQUESTED_MEDIA_TYPE_BNC: - *pMediaType = LM_MEDIA_TYPE_BNC; - *pLineSpeed = LM_LINE_SPEED_10MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_AUTO: - *pMediaType = LM_MEDIA_TYPE_UTP; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_10MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_10MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_100MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_100MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_1000MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_UTP; - *pLineSpeed = LM_LINE_SPEED_1000MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS: - *pMediaType = LM_MEDIA_TYPE_FIBER; - *pLineSpeed = LM_LINE_SPEED_100MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_FIBER; - *pLineSpeed = LM_LINE_SPEED_100MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS: - *pMediaType = LM_MEDIA_TYPE_FIBER; - *pLineSpeed = LM_LINE_SPEED_1000MBPS; - *pDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX: - *pMediaType = LM_MEDIA_TYPE_FIBER; - *pLineSpeed = LM_LINE_SPEED_1000MBPS; - *pDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - default: - break; - } /* switch */ - - return LM_STATUS_SUCCESS; -} /* LM_TranslateRequestedMediaType */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/* LM_STATUS_LINK_ACTIVE */ -/* LM_STATUS_LINK_DOWN */ -/******************************************************************************/ -static LM_STATUS LM_InitBcm540xPhy (PLM_DEVICE_BLOCK pDevice) -{ - LM_LINE_SPEED CurrentLineSpeed; - LM_DUPLEX_MODE CurrentDuplexMode; - LM_STATUS CurrentLinkStatus; - LM_UINT32 Value32; - LM_UINT32 j; - -#if 1 /* jmb: bugfix -- moved here, out of code that sets initial pwr state */ - LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x2); -#endif - if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) { - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - - if (!pDevice->InitDone) { - Value32 = 0; - } - - if (!(Value32 & PHY_STATUS_LINK_PASS)) { - LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x0c20); - - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1804); - - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1204); - - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0132); - - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0232); - - LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f); - LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0a20); - - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - for (j = 0; j < 1000; j++) { - MM_Wait (10); - - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - if (Value32 & PHY_STATUS_LINK_PASS) { - MM_Wait (40); - break; - } - } - - if ((pDevice->PhyId & PHY_ID_REV_MASK) == - PHY_BCM5401_B0_REV) { - if (!(Value32 & PHY_STATUS_LINK_PASS) - && (pDevice->OldLineSpeed == - LM_LINE_SPEED_1000MBPS)) { - LM_WritePhy (pDevice, PHY_CTRL_REG, - PHY_CTRL_PHY_RESET); - for (j = 0; j < 100; j++) { - MM_Wait (10); - - LM_ReadPhy (pDevice, - PHY_CTRL_REG, - &Value32); - if (! - (Value32 & - PHY_CTRL_PHY_RESET)) { - MM_Wait (40); - break; - } - } - - LM_WritePhy (pDevice, BCM5401_AUX_CTRL, - 0x0c20); - - LM_WritePhy (pDevice, - BCM540X_DSP_ADDRESS_REG, - 0x0012); - LM_WritePhy (pDevice, - BCM540X_DSP_RW_PORT, - 0x1804); - - LM_WritePhy (pDevice, - BCM540X_DSP_ADDRESS_REG, - 0x0013); - LM_WritePhy (pDevice, - BCM540X_DSP_RW_PORT, - 0x1204); - - LM_WritePhy (pDevice, - BCM540X_DSP_ADDRESS_REG, - 0x8006); - LM_WritePhy (pDevice, - BCM540X_DSP_RW_PORT, - 0x0132); - - LM_WritePhy (pDevice, - BCM540X_DSP_ADDRESS_REG, - 0x8006); - LM_WritePhy (pDevice, - BCM540X_DSP_RW_PORT, - 0x0232); - - LM_WritePhy (pDevice, - BCM540X_DSP_ADDRESS_REG, - 0x201f); - LM_WritePhy (pDevice, - BCM540X_DSP_RW_PORT, - 0x0a20); - } - } - } - } else if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0) { - /* Bug: 5701 A0, B0 TX CRC workaround. */ - LM_WritePhy (pDevice, 0x15, 0x0a75); - LM_WritePhy (pDevice, 0x1c, 0x8c68); - LM_WritePhy (pDevice, 0x1c, 0x8d68); - LM_WritePhy (pDevice, 0x1c, 0x8c68); - } - - /* Acknowledge interrupts. */ - LM_ReadPhy (pDevice, BCM540X_INT_STATUS_REG, &Value32); - LM_ReadPhy (pDevice, BCM540X_INT_STATUS_REG, &Value32); - - /* Configure the interrupt mask. */ - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) { - LM_WritePhy (pDevice, BCM540X_INT_MASK_REG, - ~BCM540X_INT_LINK_CHANGE); - } - - /* Configure PHY led mode. */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701 || - (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700)) { - if (pDevice->LedMode == LED_MODE_THREE_LINK) { - LM_WritePhy (pDevice, BCM540X_EXT_CTRL_REG, - BCM540X_EXT_CTRL_LINK3_LED_MODE); - } else { - LM_WritePhy (pDevice, BCM540X_EXT_CTRL_REG, 0); - } - } - - CurrentLinkStatus = LM_STATUS_LINK_DOWN; - - /* Get current link and duplex mode. */ - for (j = 0; j < 100; j++) { - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - - if (Value32 & PHY_STATUS_LINK_PASS) { - break; - } - MM_Wait (40); - } - - if (Value32 & PHY_STATUS_LINK_PASS) { - - /* Determine the current line and duplex settings. */ - LM_ReadPhy (pDevice, BCM540X_AUX_STATUS_REG, &Value32); - for (j = 0; j < 2000; j++) { - MM_Wait (10); - - LM_ReadPhy (pDevice, BCM540X_AUX_STATUS_REG, &Value32); - if (Value32) { - break; - } - } - - switch (Value32 & BCM540X_AUX_SPEED_MASK) { - case BCM540X_AUX_10BASET_HD: - CurrentLineSpeed = LM_LINE_SPEED_10MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case BCM540X_AUX_10BASET_FD: - CurrentLineSpeed = LM_LINE_SPEED_10MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case BCM540X_AUX_100BASETX_HD: - CurrentLineSpeed = LM_LINE_SPEED_100MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case BCM540X_AUX_100BASETX_FD: - CurrentLineSpeed = LM_LINE_SPEED_100MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - case BCM540X_AUX_100BASET_HD: - CurrentLineSpeed = LM_LINE_SPEED_1000MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_HALF; - break; - - case BCM540X_AUX_100BASET_FD: - CurrentLineSpeed = LM_LINE_SPEED_1000MBPS; - CurrentDuplexMode = LM_DUPLEX_MODE_FULL; - break; - - default: - - CurrentLineSpeed = LM_LINE_SPEED_UNKNOWN; - CurrentDuplexMode = LM_DUPLEX_MODE_UNKNOWN; - break; - } - - /* Make sure we are in auto-neg mode. */ - for (j = 0; j < 200; j++) { - LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32); - if (Value32 && Value32 != 0x7fff) { - break; - } - - if (Value32 == 0 && pDevice->RequestedMediaType == - LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS) { - break; - } - - MM_Wait (10); - } - - /* Use the current line settings for "auto" mode. */ - if (pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO - || pDevice->RequestedMediaType == - LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) { - if (Value32 & PHY_CTRL_AUTO_NEG_ENABLE) { - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - - /* We may be exiting low power mode and the link is in */ - /* 10mb. In this case, we need to restart autoneg. */ - LM_ReadPhy (pDevice, BCM540X_1000BASET_CTRL_REG, - &Value32); - pDevice->advertising1000 = Value32; - /* 5702FE supports 10/100Mb only. */ - if (T3_ASIC_REV (pDevice->ChipRevId) != - T3_ASIC_REV_5703 - || pDevice->BondId != - GRC_MISC_BD_ID_5702FE) { - if (! - (Value32 & - (BCM540X_AN_AD_1000BASET_HALF | - BCM540X_AN_AD_1000BASET_FULL))) { - CurrentLinkStatus = - LM_STATUS_LINK_SETTING_MISMATCH; - } - } - } else { - CurrentLinkStatus = - LM_STATUS_LINK_SETTING_MISMATCH; - } - } else { - /* Force line settings. */ - /* Use the current setting if it matches the user's requested */ - /* setting. */ - LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32); - if ((pDevice->LineSpeed == CurrentLineSpeed) && - (pDevice->DuplexMode == CurrentDuplexMode)) { - if ((pDevice->DisableAutoNeg && - !(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)) || - (!pDevice->DisableAutoNeg && - (Value32 & PHY_CTRL_AUTO_NEG_ENABLE))) { - CurrentLinkStatus = - LM_STATUS_LINK_ACTIVE; - } else { - CurrentLinkStatus = - LM_STATUS_LINK_SETTING_MISMATCH; - } - } else { - CurrentLinkStatus = - LM_STATUS_LINK_SETTING_MISMATCH; - } - } - - /* Save line settings. */ - pDevice->LineSpeed = CurrentLineSpeed; - pDevice->DuplexMode = CurrentDuplexMode; - pDevice->MediaType = LM_MEDIA_TYPE_UTP; - } - - return CurrentLinkStatus; -} /* LM_InitBcm540xPhy */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS -LM_SetFlowControl (PLM_DEVICE_BLOCK pDevice, - LM_UINT32 LocalPhyAd, LM_UINT32 RemotePhyAd) -{ - LM_FLOW_CONTROL FlowCap; - - /* Resolve flow control. */ - FlowCap = LM_FLOW_CONTROL_NONE; - - /* See Table 28B-3 of 802.3ab-1999 spec. */ - if (pDevice->FlowControlCap & LM_FLOW_CONTROL_AUTO_PAUSE) { - if (LocalPhyAd & PHY_AN_AD_PAUSE_CAPABLE) { - if (LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) { - if (RemotePhyAd & - PHY_LINK_PARTNER_PAUSE_CAPABLE) { - FlowCap = - LM_FLOW_CONTROL_TRANSMIT_PAUSE | - LM_FLOW_CONTROL_RECEIVE_PAUSE; - } else if (RemotePhyAd & - PHY_LINK_PARTNER_ASYM_PAUSE) { - FlowCap = LM_FLOW_CONTROL_RECEIVE_PAUSE; - } - } else { - if (RemotePhyAd & - PHY_LINK_PARTNER_PAUSE_CAPABLE) { - FlowCap = - LM_FLOW_CONTROL_TRANSMIT_PAUSE | - LM_FLOW_CONTROL_RECEIVE_PAUSE; - } - } - } else if (LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) { - if ((RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) && - (RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE)) { - FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE; - } - } - } else { - FlowCap = pDevice->FlowControlCap; - } - - /* Enable/disable rx PAUSE. */ - pDevice->RxMode &= ~RX_MODE_ENABLE_FLOW_CONTROL; - if (FlowCap & LM_FLOW_CONTROL_RECEIVE_PAUSE && - (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE || - pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)) { - pDevice->FlowControl |= LM_FLOW_CONTROL_RECEIVE_PAUSE; - pDevice->RxMode |= RX_MODE_ENABLE_FLOW_CONTROL; - - } - REG_WR (pDevice, MacCtrl.RxMode, pDevice->RxMode); - - /* Enable/disable tx PAUSE. */ - pDevice->TxMode &= ~TX_MODE_ENABLE_FLOW_CONTROL; - if (FlowCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE && - (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE || - pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)) { - pDevice->FlowControl |= LM_FLOW_CONTROL_TRANSMIT_PAUSE; - pDevice->TxMode |= TX_MODE_ENABLE_FLOW_CONTROL; - - } - REG_WR (pDevice, MacCtrl.TxMode, pDevice->TxMode); - - return LM_STATUS_SUCCESS; -} - -#if INCLUDE_TBI_SUPPORT -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -STATIC LM_STATUS LM_InitBcm800xPhy (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 Value32; - LM_UINT32 j; - - Value32 = REG_RD (pDevice, MacCtrl.Status); - - /* Reset the SERDES during init and when we have link. */ - if (!pDevice->InitDone || Value32 & MAC_STATUS_PCS_SYNCED) { - /* Set PLL lock range. */ - LM_WritePhy (pDevice, 0x16, 0x8007); - - /* Software reset. */ - LM_WritePhy (pDevice, 0x00, 0x8000); - - /* Wait for reset to complete. */ - for (j = 0; j < 500; j++) { - MM_Wait (10); - } - - /* Config mode; seletct PMA/Ch 1 regs. */ - LM_WritePhy (pDevice, 0x10, 0x8411); - - /* Enable auto-lock and comdet, select txclk for tx. */ - LM_WritePhy (pDevice, 0x11, 0x0a10); - - LM_WritePhy (pDevice, 0x18, 0x00a0); - LM_WritePhy (pDevice, 0x16, 0x41ff); - - /* Assert and deassert POR. */ - LM_WritePhy (pDevice, 0x13, 0x0400); - MM_Wait (40); - LM_WritePhy (pDevice, 0x13, 0x0000); - - LM_WritePhy (pDevice, 0x11, 0x0a50); - MM_Wait (40); - LM_WritePhy (pDevice, 0x11, 0x0a10); - - /* Delay for signal to stabilize. */ - for (j = 0; j < 15000; j++) { - MM_Wait (10); - } - - /* Deselect the channel register so we can read the PHY id later. */ - LM_WritePhy (pDevice, 0x10, 0x8011); - } - - return LM_STATUS_SUCCESS; -} - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -STATIC LM_STATUS LM_SetupFiberPhy (PLM_DEVICE_BLOCK pDevice) -{ - LM_STATUS CurrentLinkStatus; - AUTONEG_STATUS AnStatus = 0; - LM_UINT32 Value32; - LM_UINT32 Cnt; - LM_UINT32 j, k; - - pDevice->MacMode &= ~(MAC_MODE_HALF_DUPLEX | MAC_MODE_PORT_MODE_MASK); - - /* Initialize the send_config register. */ - REG_WR (pDevice, MacCtrl.TxAutoNeg, 0); - - /* Enable TBI and full duplex mode. */ - pDevice->MacMode |= MAC_MODE_PORT_MODE_TBI; - REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode); - - /* Initialize the BCM8002 SERDES PHY. */ - switch (pDevice->PhyId & PHY_ID_MASK) { - case PHY_BCM8002_PHY_ID: - LM_InitBcm800xPhy (pDevice); - break; - - default: - break; - } - - /* Enable link change interrupt. */ - REG_WR (pDevice, MacCtrl.MacEvent, - MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN); - - /* Default to link down. */ - CurrentLinkStatus = LM_STATUS_LINK_DOWN; - - /* Get the link status. */ - Value32 = REG_RD (pDevice, MacCtrl.Status); - if (Value32 & MAC_STATUS_PCS_SYNCED) { - if ((pDevice->RequestedMediaType == - LM_REQUESTED_MEDIA_TYPE_AUTO) - || (pDevice->DisableAutoNeg == FALSE)) { - /* auto-negotiation mode. */ - /* Initialize the autoneg default capaiblities. */ - AutonegInit (&pDevice->AnInfo); - - /* Set the context pointer to point to the main device structure. */ - pDevice->AnInfo.pContext = pDevice; - - /* Setup flow control advertisement register. */ - Value32 = GetPhyAdFlowCntrlSettings (pDevice); - if (Value32 & PHY_AN_AD_PAUSE_CAPABLE) { - pDevice->AnInfo.mr_adv_sym_pause = 1; - } else { - pDevice->AnInfo.mr_adv_sym_pause = 0; - } - - if (Value32 & PHY_AN_AD_ASYM_PAUSE) { - pDevice->AnInfo.mr_adv_asym_pause = 1; - } else { - pDevice->AnInfo.mr_adv_asym_pause = 0; - } - - /* Try to autoneg up to six times. */ - if (pDevice->IgnoreTbiLinkChange) { - Cnt = 1; - } else { - Cnt = 6; - } - for (j = 0; j < Cnt; j++) { - REG_WR (pDevice, MacCtrl.TxAutoNeg, 0); - - Value32 = - pDevice->MacMode & ~MAC_MODE_PORT_MODE_MASK; - REG_WR (pDevice, MacCtrl.Mode, Value32); - MM_Wait (20); - - REG_WR (pDevice, MacCtrl.Mode, - pDevice-> - MacMode | MAC_MODE_SEND_CONFIGS); - - MM_Wait (20); - - pDevice->AnInfo.State = AN_STATE_UNKNOWN; - pDevice->AnInfo.CurrentTime_us = 0; - - REG_WR (pDevice, Grc.Timer, 0); - for (k = 0; - (pDevice->AnInfo.CurrentTime_us < 75000) - && (k < 75000); k++) { - AnStatus = - Autoneg8023z (&pDevice->AnInfo); - - if ((AnStatus == AUTONEG_STATUS_DONE) || - (AnStatus == AUTONEG_STATUS_FAILED)) - { - break; - } - - pDevice->AnInfo.CurrentTime_us = - REG_RD (pDevice, Grc.Timer); - - } - if ((AnStatus == AUTONEG_STATUS_DONE) || - (AnStatus == AUTONEG_STATUS_FAILED)) { - break; - } - if (j >= 1) { - if (!(REG_RD (pDevice, MacCtrl.Status) & - MAC_STATUS_PCS_SYNCED)) { - break; - } - } - } - - /* Stop sending configs. */ - MM_AnTxIdle (&pDevice->AnInfo); - - /* Resolve flow control settings. */ - if ((AnStatus == AUTONEG_STATUS_DONE) && - pDevice->AnInfo.mr_an_complete - && pDevice->AnInfo.mr_link_ok - && pDevice->AnInfo.mr_lp_adv_full_duplex) { - LM_UINT32 RemotePhyAd; - LM_UINT32 LocalPhyAd; - - LocalPhyAd = 0; - if (pDevice->AnInfo.mr_adv_sym_pause) { - LocalPhyAd |= PHY_AN_AD_PAUSE_CAPABLE; - } - - if (pDevice->AnInfo.mr_adv_asym_pause) { - LocalPhyAd |= PHY_AN_AD_ASYM_PAUSE; - } - - RemotePhyAd = 0; - if (pDevice->AnInfo.mr_lp_adv_sym_pause) { - RemotePhyAd |= - PHY_LINK_PARTNER_PAUSE_CAPABLE; - } - - if (pDevice->AnInfo.mr_lp_adv_asym_pause) { - RemotePhyAd |= - PHY_LINK_PARTNER_ASYM_PAUSE; - } - - LM_SetFlowControl (pDevice, LocalPhyAd, - RemotePhyAd); - - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - } - for (j = 0; j < 30; j++) { - MM_Wait (20); - REG_WR (pDevice, MacCtrl.Status, - MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED); - MM_Wait (20); - if ((REG_RD (pDevice, MacCtrl.Status) & - (MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED)) == 0) - break; - } - if (pDevice->PollTbiLink) { - Value32 = REG_RD (pDevice, MacCtrl.Status); - if (Value32 & MAC_STATUS_RECEIVING_CFG) { - pDevice->IgnoreTbiLinkChange = TRUE; - } else { - pDevice->IgnoreTbiLinkChange = FALSE; - } - } - Value32 = REG_RD (pDevice, MacCtrl.Status); - if (CurrentLinkStatus == LM_STATUS_LINK_DOWN && - (Value32 & MAC_STATUS_PCS_SYNCED) && - ((Value32 & MAC_STATUS_RECEIVING_CFG) == 0)) { - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - } - } else { - /* We are forcing line speed. */ - pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE; - LM_SetFlowControl (pDevice, 0, 0); - - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode | - MAC_MODE_SEND_CONFIGS); - } - } - /* Set the link polarity bit. */ - pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY; - REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode); - - pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED | - (pDevice->pStatusBlkVirt-> - Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS); - - for (j = 0; j < 100; j++) { - REG_WR (pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED); - MM_Wait (5); - if ((REG_RD (pDevice, MacCtrl.Status) & - (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0) - break; - } - - Value32 = REG_RD (pDevice, MacCtrl.Status); - if ((Value32 & MAC_STATUS_PCS_SYNCED) == 0) { - CurrentLinkStatus = LM_STATUS_LINK_DOWN; - if (pDevice->DisableAutoNeg == FALSE) { - REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode | - MAC_MODE_SEND_CONFIGS); - MM_Wait (1); - REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode); - } - } - - /* Initialize the current link status. */ - if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) { - pDevice->LineSpeed = LM_LINE_SPEED_1000MBPS; - pDevice->DuplexMode = LM_DUPLEX_MODE_FULL; - REG_WR (pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED | - LED_CTRL_1000MBPS_LED_ON); - } else { - pDevice->LineSpeed = LM_LINE_SPEED_UNKNOWN; - pDevice->DuplexMode = LM_DUPLEX_MODE_UNKNOWN; - REG_WR (pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED | - LED_CTRL_OVERRIDE_TRAFFIC_LED); - } - - /* Indicate link status. */ - if (pDevice->LinkStatus != CurrentLinkStatus) { - pDevice->LinkStatus = CurrentLinkStatus; - MM_IndicateStatus (pDevice, CurrentLinkStatus); - } - - return LM_STATUS_SUCCESS; -} -#endif /* INCLUDE_TBI_SUPPORT */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS LM_SetupCopperPhy (PLM_DEVICE_BLOCK pDevice) -{ - LM_STATUS CurrentLinkStatus; - LM_UINT32 Value32; - - /* Assume there is not link first. */ - CurrentLinkStatus = LM_STATUS_LINK_DOWN; - - /* Disable phy link change attention. */ - REG_WR (pDevice, MacCtrl.MacEvent, 0); - - /* Clear link change attention. */ - REG_WR (pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED); - - /* Disable auto-polling for the moment. */ - pDevice->MiMode = 0xc0000; - REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode); - MM_Wait (40); - - /* Determine the requested line speed and duplex. */ - pDevice->OldLineSpeed = pDevice->LineSpeed; - LM_TranslateRequestedMediaType (pDevice->RequestedMediaType, - &pDevice->MediaType, - &pDevice->LineSpeed, - &pDevice->DuplexMode); - - /* Initialize the phy chip. */ - switch (pDevice->PhyId & PHY_ID_MASK) { - case PHY_BCM5400_PHY_ID: - case PHY_BCM5401_PHY_ID: - case PHY_BCM5411_PHY_ID: - case PHY_BCM5701_PHY_ID: - case PHY_BCM5703_PHY_ID: - case PHY_BCM5704_PHY_ID: - CurrentLinkStatus = LM_InitBcm540xPhy (pDevice); - break; - - default: - break; - } - - if (CurrentLinkStatus == LM_STATUS_LINK_SETTING_MISMATCH) { - CurrentLinkStatus = LM_STATUS_LINK_DOWN; - } - - /* Setup flow control. */ - pDevice->FlowControl = LM_FLOW_CONTROL_NONE; - if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) { - LM_FLOW_CONTROL FlowCap; /* Flow control capability. */ - - FlowCap = LM_FLOW_CONTROL_NONE; - - if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL) { - if (pDevice->DisableAutoNeg == FALSE || - pDevice->RequestedMediaType == - LM_REQUESTED_MEDIA_TYPE_AUTO - || pDevice->RequestedMediaType == - LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) { - LM_UINT32 ExpectedPhyAd; - LM_UINT32 LocalPhyAd; - LM_UINT32 RemotePhyAd; - - LM_ReadPhy (pDevice, PHY_AN_AD_REG, - &LocalPhyAd); - pDevice->advertising = LocalPhyAd; - LocalPhyAd &= - (PHY_AN_AD_ASYM_PAUSE | - PHY_AN_AD_PAUSE_CAPABLE); - - ExpectedPhyAd = - GetPhyAdFlowCntrlSettings (pDevice); - - if (LocalPhyAd != ExpectedPhyAd) { - CurrentLinkStatus = LM_STATUS_LINK_DOWN; - } else { - LM_ReadPhy (pDevice, - PHY_LINK_PARTNER_ABILITY_REG, - &RemotePhyAd); - - LM_SetFlowControl (pDevice, LocalPhyAd, - RemotePhyAd); - } - } else { - pDevice->FlowControlCap &= - ~LM_FLOW_CONTROL_AUTO_PAUSE; - LM_SetFlowControl (pDevice, 0, 0); - } - } - } - - if (CurrentLinkStatus == LM_STATUS_LINK_DOWN) { - LM_ForceAutoNeg (pDevice, pDevice->RequestedMediaType); - - /* If we force line speed, we make get link right away. */ - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - if (Value32 & PHY_STATUS_LINK_PASS) { - CurrentLinkStatus = LM_STATUS_LINK_ACTIVE; - } - } - - /* GMII interface. */ - pDevice->MacMode &= ~MAC_MODE_PORT_MODE_MASK; - if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) { - if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS || - pDevice->LineSpeed == LM_LINE_SPEED_10MBPS) { - pDevice->MacMode |= MAC_MODE_PORT_MODE_MII; - } else { - pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII; - } - } else { - pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII; - } - - /* Set the MAC to operate in the appropriate duplex mode. */ - pDevice->MacMode &= ~MAC_MODE_HALF_DUPLEX; - if (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF) { - pDevice->MacMode |= MAC_MODE_HALF_DUPLEX; - } - - /* Set the link polarity bit. */ - pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY; - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - if ((pDevice->LedMode == LED_MODE_LINK10) || - (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE && - pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)) { - pDevice->MacMode |= MAC_MODE_LINK_POLARITY; - } - } else { - if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) { - pDevice->MacMode |= MAC_MODE_LINK_POLARITY; - } - - /* Set LED mode. */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Value32 = LED_CTRL_PHY_MODE_1; - } else { - if (pDevice->LedMode == LED_MODE_OUTPUT) { - Value32 = LED_CTRL_PHY_MODE_2; - } else { - Value32 = LED_CTRL_PHY_MODE_1; - } - } - REG_WR (pDevice, MacCtrl.LedCtrl, Value32); - } - - REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode); - - /* Enable auto polling. */ - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - pDevice->MiMode |= MI_MODE_AUTO_POLLING_ENABLE; - REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode); - } - - /* Enable phy link change attention. */ - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) { - REG_WR (pDevice, MacCtrl.MacEvent, - MAC_EVENT_ENABLE_MI_INTERRUPT); - } else { - REG_WR (pDevice, MacCtrl.MacEvent, - MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN); - } - if ((T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) && - (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) && - (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) && - (((pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) && - (pDevice->PciState & T3_PCI_STATE_BUS_SPEED_HIGH)) || - !(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))) { - MM_Wait (120); - REG_WR (pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED); - MEM_WR_OFFSET (pDevice, T3_FIRMWARE_MAILBOX, - T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE); - } - - /* Indicate link status. */ - if (pDevice->LinkStatus != CurrentLinkStatus) { - pDevice->LinkStatus = CurrentLinkStatus; - MM_IndicateStatus (pDevice, CurrentLinkStatus); - } - - return LM_STATUS_SUCCESS; -} /* LM_SetupCopperPhy */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS LM_SetupPhy (PLM_DEVICE_BLOCK pDevice) -{ - LM_STATUS LmStatus; - LM_UINT32 Value32; - -#if INCLUDE_TBI_SUPPORT - if (pDevice->EnableTbi) { - LmStatus = LM_SetupFiberPhy (pDevice); - } else -#endif /* INCLUDE_TBI_SUPPORT */ - { - LmStatus = LM_SetupCopperPhy (pDevice); - } - if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) { - if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) { - Value32 = REG_RD (pDevice, PciCfg.PciState); - REG_WR (pDevice, PciCfg.PciState, - Value32 | T3_PCI_STATE_RETRY_SAME_DMA); - } - } - if ((pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) && - (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF)) { - REG_WR (pDevice, MacCtrl.TxLengths, 0x26ff); - } else { - REG_WR (pDevice, MacCtrl.TxLengths, 0x2620); - } - - return LmStatus; -} - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_VOID -LM_ReadPhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg, PLM_UINT32 pData32) -{ - LM_UINT32 Value32; - LM_UINT32 j; - - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode & - ~MI_MODE_AUTO_POLLING_ENABLE); - MM_Wait (40); - } - - Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) | - ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << - MI_COM_FIRST_PHY_REG_ADDR_BIT) | MI_COM_CMD_READ | MI_COM_START; - - REG_WR (pDevice, MacCtrl.MiCom, Value32); - - for (j = 0; j < 20; j++) { - MM_Wait (25); - - Value32 = REG_RD (pDevice, MacCtrl.MiCom); - - if (!(Value32 & MI_COM_BUSY)) { - MM_Wait (5); - Value32 = REG_RD (pDevice, MacCtrl.MiCom); - Value32 &= MI_COM_PHY_DATA_MASK; - break; - } - } - - if (Value32 & MI_COM_BUSY) { - Value32 = 0; - } - - *pData32 = Value32; - - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode); - MM_Wait (40); - } -} /* LM_ReadPhy */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_VOID -LM_WritePhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg, LM_UINT32 Data32) -{ - LM_UINT32 Value32; - LM_UINT32 j; - - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode & - ~MI_MODE_AUTO_POLLING_ENABLE); - MM_Wait (40); - } - - Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) | - ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << - MI_COM_FIRST_PHY_REG_ADDR_BIT) | (Data32 & MI_COM_PHY_DATA_MASK) | - MI_COM_CMD_WRITE | MI_COM_START; - - REG_WR (pDevice, MacCtrl.MiCom, Value32); - - for (j = 0; j < 20; j++) { - MM_Wait (25); - - Value32 = REG_RD (pDevice, MacCtrl.MiCom); - - if (!(Value32 & MI_COM_BUSY)) { - MM_Wait (5); - break; - } - } - - if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) { - REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode); - MM_Wait (40); - } -} /* LM_WritePhy */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS LM_SetPowerState (PLM_DEVICE_BLOCK pDevice, LM_POWER_STATE PowerLevel) -{ - LM_UINT32 PmeSupport; - LM_UINT32 Value32; - LM_UINT32 PmCtrl; - - /* make sureindirect accesses are enabled */ - MM_WriteConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG, - pDevice->MiscHostCtrl); - - /* Clear the PME_ASSERT bit and the power state bits. Also enable */ - /* the PME bit. */ - MM_ReadConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, &PmCtrl); - - PmCtrl |= T3_PM_PME_ASSERTED; - PmCtrl &= ~T3_PM_POWER_STATE_MASK; - - /* Set the appropriate power state. */ - if (PowerLevel == LM_POWER_STATE_D0) { - - /* Bring the card out of low power mode. */ - PmCtrl |= T3_PM_POWER_STATE_D0; - MM_WriteConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl); - - REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl); - MM_Wait (40); -#if 0 /* Bugfix by jmb...can't call WritePhy here because pDevice not fully initialized */ - LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x02); -#endif - - return LM_STATUS_SUCCESS; - } else if (PowerLevel == LM_POWER_STATE_D1) { - PmCtrl |= T3_PM_POWER_STATE_D1; - } else if (PowerLevel == LM_POWER_STATE_D2) { - PmCtrl |= T3_PM_POWER_STATE_D2; - } else if (PowerLevel == LM_POWER_STATE_D3) { - PmCtrl |= T3_PM_POWER_STATE_D3; - } else { - return LM_STATUS_FAILURE; - } - PmCtrl |= T3_PM_PME_ENABLE; - - /* Mask out all interrupts so LM_SetupPhy won't be called while we are */ - /* setting new line speed. */ - Value32 = REG_RD (pDevice, PciCfg.MiscHostCtrl); - REG_WR (pDevice, PciCfg.MiscHostCtrl, - Value32 | MISC_HOST_CTRL_MASK_PCI_INT); - - if (!pDevice->RestoreOnWakeUp) { - pDevice->RestoreOnWakeUp = TRUE; - pDevice->WakeUpDisableAutoNeg = pDevice->DisableAutoNeg; - pDevice->WakeUpRequestedMediaType = pDevice->RequestedMediaType; - } - - /* Force auto-negotiation to 10 line speed. */ - pDevice->DisableAutoNeg = FALSE; - pDevice->RequestedMediaType = LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS; - LM_SetupPhy (pDevice); - - /* Put the driver in the initial state, and go through the power down */ - /* sequence. */ - LM_Halt (pDevice); - - MM_ReadConfig32 (pDevice, T3_PCI_PM_CAP_REG, &PmeSupport); - - if (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE) { - - /* Enable WOL. */ - LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x5a); - MM_Wait (40); - - /* Set LED mode. */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Value32 = LED_CTRL_PHY_MODE_1; - } else { - if (pDevice->LedMode == LED_MODE_OUTPUT) { - Value32 = LED_CTRL_PHY_MODE_2; - } else { - Value32 = LED_CTRL_PHY_MODE_1; - } - } - - Value32 = MAC_MODE_PORT_MODE_MII; - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) { - if (pDevice->LedMode == LED_MODE_LINK10 || - pDevice->WolSpeed == WOL_SPEED_10MB) { - Value32 |= MAC_MODE_LINK_POLARITY; - } - } else { - Value32 |= MAC_MODE_LINK_POLARITY; - } - REG_WR (pDevice, MacCtrl.Mode, Value32); - MM_Wait (40); - MM_Wait (40); - MM_Wait (40); - - /* Always enable magic packet wake-up if we have vaux. */ - if ((PmeSupport & T3_PCI_PM_CAP_PME_D3COLD) && - (pDevice->WakeUpModeCap & LM_WAKE_UP_MODE_MAGIC_PACKET)) { - Value32 |= MAC_MODE_DETECT_MAGIC_PACKET_ENABLE; - } - - REG_WR (pDevice, MacCtrl.Mode, Value32); - - /* Enable the receiver. */ - REG_WR (pDevice, MacCtrl.RxMode, RX_MODE_ENABLE); - } - - /* Disable tx/rx clocks, and seletect an alternate clock. */ - if (pDevice->WolSpeed == WOL_SPEED_100MB) { - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Value32 = - T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | - T3_PCI_SELECT_ALTERNATE_CLOCK; - } else { - Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK; - } - REG_WR (pDevice, PciCfg.ClockCtrl, Value32); - - MM_Wait (40); - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Value32 = - T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | - T3_PCI_SELECT_ALTERNATE_CLOCK | - T3_PCI_44MHZ_CORE_CLOCK; - } else { - Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK | - T3_PCI_44MHZ_CORE_CLOCK; - } - - REG_WR (pDevice, PciCfg.ClockCtrl, Value32); - - MM_Wait (40); - - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Value32 = - T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | - T3_PCI_44MHZ_CORE_CLOCK; - } else { - Value32 = T3_PCI_44MHZ_CORE_CLOCK; - } - - REG_WR (pDevice, PciCfg.ClockCtrl, Value32); - } else { - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - Value32 = - T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK | - T3_PCI_SELECT_ALTERNATE_CLOCK | - T3_PCI_POWER_DOWN_PCI_PLL133; - } else { - Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK | - T3_PCI_POWER_DOWN_PCI_PLL133; - } - - REG_WR (pDevice, PciCfg.ClockCtrl, Value32); - } - - MM_Wait (40); - - if (!pDevice->EepromWp - && (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE)) { - /* Switch adapter to auxilliary power. */ - if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 || - T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) { - /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */ - REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_GPIO_OE0 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE2 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1); - MM_Wait (40); - } else { - /* GPIO0 = 0, GPIO1 = 1, GPIO2 = 1. */ - REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_GPIO_OE0 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE2 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2); - MM_Wait (40); - - /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 1. */ - REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_GPIO_OE0 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE2 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2); - MM_Wait (40); - - /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */ - REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl | - GRC_MISC_LOCAL_CTRL_GPIO_OE0 | - GRC_MISC_LOCAL_CTRL_GPIO_OE1 | - GRC_MISC_LOCAL_CTRL_GPIO_OE2 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 | - GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1); - MM_Wait (40); - } - } - - /* Set the phy to low power mode. */ - /* Put the the hardware in low power mode. */ - MM_WriteConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl); - - return LM_STATUS_SUCCESS; -} /* LM_SetPowerState */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -static LM_UINT32 GetPhyAdFlowCntrlSettings (PLM_DEVICE_BLOCK pDevice) -{ - LM_UINT32 Value32; - - Value32 = 0; - - /* Auto negotiation flow control only when autonegotiation is enabled. */ - if (pDevice->DisableAutoNeg == FALSE || - pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO || - pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) { - /* Please refer to Table 28B-3 of the 802.3ab-1999 spec. */ - if ((pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE) || - ((pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) - && (pDevice-> - FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE))) { - Value32 |= PHY_AN_AD_PAUSE_CAPABLE; - } else if (pDevice-> - FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE) { - Value32 |= PHY_AN_AD_ASYM_PAUSE; - } else if (pDevice-> - FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) { - Value32 |= - PHY_AN_AD_PAUSE_CAPABLE | PHY_AN_AD_ASYM_PAUSE; - } - } - - return Value32; -} - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/* LM_STATUS_FAILURE */ -/* LM_STATUS_SUCCESS */ -/* */ -/******************************************************************************/ -static LM_STATUS -LM_ForceAutoNegBcm540xPhy (PLM_DEVICE_BLOCK pDevice, - LM_REQUESTED_MEDIA_TYPE RequestedMediaType) -{ - LM_MEDIA_TYPE MediaType; - LM_LINE_SPEED LineSpeed; - LM_DUPLEX_MODE DuplexMode; - LM_UINT32 NewPhyCtrl; - LM_UINT32 Value32; - LM_UINT32 Cnt; - - /* Get the interface type, line speed, and duplex mode. */ - LM_TranslateRequestedMediaType (RequestedMediaType, &MediaType, - &LineSpeed, &DuplexMode); - - if (pDevice->RestoreOnWakeUp) { - LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, 0); - pDevice->advertising1000 = 0; - Value32 = PHY_AN_AD_10BASET_FULL | PHY_AN_AD_10BASET_HALF; - if (pDevice->WolSpeed == WOL_SPEED_100MB) { - Value32 |= - PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF; - } - Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; - Value32 |= GetPhyAdFlowCntrlSettings (pDevice); - LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - } - /* Setup the auto-negotiation advertisement register. */ - else if (LineSpeed == LM_LINE_SPEED_UNKNOWN) { - /* Setup the 10/100 Mbps auto-negotiation advertisement register. */ - Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD | - PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL | - PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF; - Value32 |= GetPhyAdFlowCntrlSettings (pDevice); - - LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - - /* Advertise 1000Mbps */ - Value32 = - BCM540X_AN_AD_1000BASET_HALF | BCM540X_AN_AD_1000BASET_FULL; - -#if INCLUDE_5701_AX_FIX - /* Bug: workaround for CRC error in gigabit mode when we are in */ - /* slave mode. This will force the PHY to operate in */ - /* master mode. */ - if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 || - pDevice->ChipRevId == T3_CHIP_ID_5701_B0) { - Value32 |= BCM540X_CONFIG_AS_MASTER | - BCM540X_ENABLE_CONFIG_AS_MASTER; - } -#endif - - LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, Value32); - pDevice->advertising1000 = Value32; - } else { - if (LineSpeed == LM_LINE_SPEED_1000MBPS) { - Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; - Value32 |= GetPhyAdFlowCntrlSettings (pDevice); - - LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - - if (DuplexMode != LM_DUPLEX_MODE_FULL) { - Value32 = BCM540X_AN_AD_1000BASET_HALF; - } else { - Value32 = BCM540X_AN_AD_1000BASET_FULL; - } - - LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, - Value32); - pDevice->advertising1000 = Value32; - } else if (LineSpeed == LM_LINE_SPEED_100MBPS) { - LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, 0); - pDevice->advertising1000 = 0; - - if (DuplexMode != LM_DUPLEX_MODE_FULL) { - Value32 = PHY_AN_AD_100BASETX_HALF; - } else { - Value32 = PHY_AN_AD_100BASETX_FULL; - } - - Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; - Value32 |= GetPhyAdFlowCntrlSettings (pDevice); - - LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - } else if (LineSpeed == LM_LINE_SPEED_10MBPS) { - LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, 0); - pDevice->advertising1000 = 0; - - if (DuplexMode != LM_DUPLEX_MODE_FULL) { - Value32 = PHY_AN_AD_10BASET_HALF; - } else { - Value32 = PHY_AN_AD_10BASET_FULL; - } - - Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD; - Value32 |= GetPhyAdFlowCntrlSettings (pDevice); - - LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32); - pDevice->advertising = Value32; - } - } - - /* Force line speed if auto-negotiation is disabled. */ - if (pDevice->DisableAutoNeg && LineSpeed != LM_LINE_SPEED_UNKNOWN) { - /* This code path is executed only when there is link. */ - pDevice->MediaType = MediaType; - pDevice->LineSpeed = LineSpeed; - pDevice->DuplexMode = DuplexMode; - - /* Force line seepd. */ - NewPhyCtrl = 0; - switch (LineSpeed) { - case LM_LINE_SPEED_10MBPS: - NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_10MBPS; - break; - case LM_LINE_SPEED_100MBPS: - NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_100MBPS; - break; - case LM_LINE_SPEED_1000MBPS: - NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS; - break; - default: - NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS; - break; - } - - if (DuplexMode == LM_DUPLEX_MODE_FULL) { - NewPhyCtrl |= PHY_CTRL_FULL_DUPLEX_MODE; - } - - /* Don't do anything if the PHY_CTRL is already what we wanted. */ - LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32); - if (Value32 != NewPhyCtrl) { - /* Temporary bring the link down before forcing line speed. */ - LM_WritePhy (pDevice, PHY_CTRL_REG, - PHY_CTRL_LOOPBACK_MODE); - - /* Wait for link to go down. */ - for (Cnt = 0; Cnt < 15000; Cnt++) { - MM_Wait (10); - - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32); - - if (!(Value32 & PHY_STATUS_LINK_PASS)) { - MM_Wait (40); - break; - } - } - - LM_WritePhy (pDevice, PHY_CTRL_REG, NewPhyCtrl); - MM_Wait (40); - } - } else { - LM_WritePhy (pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE | - PHY_CTRL_RESTART_AUTO_NEG); - } - - return LM_STATUS_SUCCESS; -} /* LM_ForceAutoNegBcm540xPhy */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -static LM_STATUS -LM_ForceAutoNeg (PLM_DEVICE_BLOCK pDevice, - LM_REQUESTED_MEDIA_TYPE RequestedMediaType) -{ - LM_STATUS LmStatus; - - /* Initialize the phy chip. */ - switch (pDevice->PhyId & PHY_ID_MASK) { - case PHY_BCM5400_PHY_ID: - case PHY_BCM5401_PHY_ID: - case PHY_BCM5411_PHY_ID: - case PHY_BCM5701_PHY_ID: - case PHY_BCM5703_PHY_ID: - case PHY_BCM5704_PHY_ID: - LmStatus = - LM_ForceAutoNegBcm540xPhy (pDevice, RequestedMediaType); - break; - - default: - LmStatus = LM_STATUS_FAILURE; - break; - } - - return LmStatus; -} /* LM_ForceAutoNeg */ - -/******************************************************************************/ -/* Description: */ -/* */ -/* Return: */ -/******************************************************************************/ -LM_STATUS LM_LoadFirmware (PLM_DEVICE_BLOCK pDevice, - PT3_FWIMG_INFO pFwImg, - LM_UINT32 LoadCpu, LM_UINT32 StartCpu) -{ - LM_UINT32 i; - LM_UINT32 address; - - if (LoadCpu & T3_RX_CPU_ID) { - if (LM_HaltCpu (pDevice, T3_RX_CPU_ID) != LM_STATUS_SUCCESS) { - return LM_STATUS_FAILURE; - } - - /* First of all clear scrach pad memory */ - for (i = 0; i < T3_RX_CPU_SPAD_SIZE; i += 4) { - LM_RegWrInd (pDevice, T3_RX_CPU_SPAD_ADDR + i, 0); - } - - /* Copy code first */ - address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff); - for (i = 0; i <= pFwImg->Text.Length; i += 4) { - LM_RegWrInd (pDevice, address + i, - ((LM_UINT32 *) pFwImg->Text.Buffer)[i / - 4]); - } - - address = - T3_RX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff); - for (i = 0; i <= pFwImg->ROnlyData.Length; i += 4) { - LM_RegWrInd (pDevice, address + i, - ((LM_UINT32 *) pFwImg->ROnlyData. - Buffer)[i / 4]); - } - - address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff); - for (i = 0; i <= pFwImg->Data.Length; i += 4) { - LM_RegWrInd (pDevice, address + i, - ((LM_UINT32 *) pFwImg->Data.Buffer)[i / - 4]); - } - } - - if (LoadCpu & T3_TX_CPU_ID) { - if (LM_HaltCpu (pDevice, T3_TX_CPU_ID) != LM_STATUS_SUCCESS) { - return LM_STATUS_FAILURE; - } - - /* First of all clear scrach pad memory */ - for (i = 0; i < T3_TX_CPU_SPAD_SIZE; i += 4) { - LM_RegWrInd (pDevice, T3_TX_CPU_SPAD_ADDR + i, 0); - } - - /* Copy code first */ - address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff); - for (i = 0; i <= pFwImg->Text.Length; i += 4) { - LM_RegWrInd (pDevice, address + i, - ((LM_UINT32 *) pFwImg->Text.Buffer)[i / - 4]); - } - - address = - T3_TX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff); - for (i = 0; i <= pFwImg->ROnlyData.Length; i += 4) { - LM_RegWrInd (pDevice, address + i, - ((LM_UINT32 *) pFwImg->ROnlyData. - Buffer)[i / 4]); - } - - address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff); - for (i = 0; i <= pFwImg->Data.Length; i += 4) { - LM_RegWrInd (pDevice, address + i, - ((LM_UINT32 *) pFwImg->Data.Buffer)[i / - 4]); - } - } - - if (StartCpu & T3_RX_CPU_ID) { - /* Start Rx CPU */ - REG_WR (pDevice, rxCpu.reg.state, 0xffffffff); - REG_WR (pDevice, rxCpu.reg.PC, pFwImg->StartAddress); - for (i = 0; i < 5; i++) { - if (pFwImg->StartAddress == - REG_RD (pDevice, rxCpu.reg.PC)) - break; - - REG_WR (pDevice, rxCpu.reg.state, 0xffffffff); - REG_WR (pDevice, rxCpu.reg.mode, CPU_MODE_HALT); - REG_WR (pDevice, rxCpu.reg.PC, pFwImg->StartAddress); - MM_Wait (1000); - } - - REG_WR (pDevice, rxCpu.reg.state, 0xffffffff); - REG_WR (pDevice, rxCpu.reg.mode, 0); - } - - if (StartCpu & T3_TX_CPU_ID) { - /* Start Tx CPU */ - REG_WR (pDevice, txCpu.reg.state, 0xffffffff); - REG_WR (pDevice, txCpu.reg.PC, pFwImg->StartAddress); - for (i = 0; i < 5; i++) { - if (pFwImg->StartAddress == - REG_RD (pDevice, txCpu.reg.PC)) - break; - - REG_WR (pDevice, txCpu.reg.state, 0xffffffff); - REG_WR (pDevice, txCpu.reg.mode, CPU_MODE_HALT); - REG_WR (pDevice, txCpu.reg.PC, pFwImg->StartAddress); - MM_Wait (1000); - } - - REG_WR (pDevice, txCpu.reg.state, 0xffffffff); - REG_WR (pDevice, txCpu.reg.mode, 0); - } - - return LM_STATUS_SUCCESS; -} - -STATIC LM_STATUS LM_HaltCpu (PLM_DEVICE_BLOCK pDevice, LM_UINT32 cpu_number) -{ - LM_UINT32 i; - - if (cpu_number == T3_RX_CPU_ID) { - for (i = 0; i < 10000; i++) { - REG_WR (pDevice, rxCpu.reg.state, 0xffffffff); - REG_WR (pDevice, rxCpu.reg.mode, CPU_MODE_HALT); - - if (REG_RD (pDevice, rxCpu.reg.mode) & CPU_MODE_HALT) - break; - } - - REG_WR (pDevice, rxCpu.reg.state, 0xffffffff); - REG_WR (pDevice, rxCpu.reg.mode, CPU_MODE_HALT); - MM_Wait (10); - } else { - for (i = 0; i < 10000; i++) { - REG_WR (pDevice, txCpu.reg.state, 0xffffffff); - REG_WR (pDevice, txCpu.reg.mode, CPU_MODE_HALT); - - if (REG_RD (pDevice, txCpu.reg.mode) & CPU_MODE_HALT) - break; - } - } - - return ((i == 10000) ? LM_STATUS_FAILURE : LM_STATUS_SUCCESS); -} - -int LM_BlinkLED (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDurationSec) -{ - LM_UINT32 Oldcfg; - int j; - int ret = 0; - - if (BlinkDurationSec == 0) { - return 0; - } - if (BlinkDurationSec > 120) { - BlinkDurationSec = 120; - } - - Oldcfg = REG_RD (pDevice, MacCtrl.LedCtrl); - for (j = 0; j < BlinkDurationSec * 2; j++) { - if (j % 2) { - /* Turn on the LEDs. */ - REG_WR (pDevice, MacCtrl.LedCtrl, - LED_CTRL_OVERRIDE_LINK_LED | - LED_CTRL_1000MBPS_LED_ON | - LED_CTRL_100MBPS_LED_ON | - LED_CTRL_10MBPS_LED_ON | - LED_CTRL_OVERRIDE_TRAFFIC_LED | - LED_CTRL_BLINK_TRAFFIC_LED | - LED_CTRL_TRAFFIC_LED); - } else { - /* Turn off the LEDs. */ - REG_WR (pDevice, MacCtrl.LedCtrl, - LED_CTRL_OVERRIDE_LINK_LED | - LED_CTRL_OVERRIDE_TRAFFIC_LED); - } - -#ifndef EMBEDDED - current->state = TASK_INTERRUPTIBLE; - if (schedule_timeout (HZ / 2) != 0) { - ret = -EINTR; - break; - } -#else - udelay (100000); /* 1s sleep */ -#endif - } - REG_WR (pDevice, MacCtrl.LedCtrl, Oldcfg); - return ret; -} - -int t3_do_dma (PLM_DEVICE_BLOCK pDevice, - LM_PHYSICAL_ADDRESS host_addr_phy, int length, int dma_read) -{ - T3_DMA_DESC dma_desc; - int i; - LM_UINT32 dma_desc_addr; - LM_UINT32 value32; - - REG_WR (pDevice, BufMgr.Mode, 0); - REG_WR (pDevice, Ftq.Reset, 0); - - dma_desc.host_addr.High = host_addr_phy.High; - dma_desc.host_addr.Low = host_addr_phy.Low; - dma_desc.nic_mbuf = 0x2100; - dma_desc.len = length; - dma_desc.flags = 0x00000004; /* Generate Rx-CPU event */ - - if (dma_read) { - dma_desc.cqid_sqid = (T3_QID_RX_BD_COMP << 8) | - T3_QID_DMA_HIGH_PRI_READ; - REG_WR (pDevice, DmaRead.Mode, DMA_READ_MODE_ENABLE); - } else { - dma_desc.cqid_sqid = (T3_QID_RX_DATA_COMP << 8) | - T3_QID_DMA_HIGH_PRI_WRITE; - REG_WR (pDevice, DmaWrite.Mode, DMA_WRITE_MODE_ENABLE); - } - - dma_desc_addr = T3_NIC_DMA_DESC_POOL_ADDR; - - /* Writing this DMA descriptor to DMA memory */ - for (i = 0; i < sizeof (T3_DMA_DESC); i += 4) { - value32 = *((PLM_UINT32) (((PLM_UINT8) & dma_desc) + i)); - MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, - dma_desc_addr + i); - MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_DATA_REG, - cpu_to_le32 (value32)); - } - MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, 0); - - if (dma_read) - REG_WR (pDevice, Ftq.DmaHighReadFtqFifoEnqueueDequeue, - dma_desc_addr); - else - REG_WR (pDevice, Ftq.DmaHighWriteFtqFifoEnqueueDequeue, - dma_desc_addr); - - for (i = 0; i < 40; i++) { - if (dma_read) - value32 = - REG_RD (pDevice, - Ftq.RcvBdCompFtqFifoEnqueueDequeue); - else - value32 = - REG_RD (pDevice, - Ftq.RcvDataCompFtqFifoEnqueueDequeue); - - if ((value32 & 0xffff) == dma_desc_addr) - break; - - MM_Wait (10); - } - - return LM_STATUS_SUCCESS; -} - -STATIC LM_STATUS -LM_DmaTest (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt, - LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize) -{ - int j; - LM_UINT32 *ptr; - int dma_success = 0; - - if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 && - T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5701) { - return LM_STATUS_SUCCESS; - } - while (!dma_success) { - /* Fill data with incremental patterns */ - ptr = (LM_UINT32 *) pBufferVirt; - for (j = 0; j < BufferSize / 4; j++) - *ptr++ = j; - - if (t3_do_dma (pDevice, BufferPhy, BufferSize, 1) == - LM_STATUS_FAILURE) { - return LM_STATUS_FAILURE; - } - - MM_Wait (40); - ptr = (LM_UINT32 *) pBufferVirt; - /* Fill data with zero */ - for (j = 0; j < BufferSize / 4; j++) - *ptr++ = 0; - - if (t3_do_dma (pDevice, BufferPhy, BufferSize, 0) == - LM_STATUS_FAILURE) { - return LM_STATUS_FAILURE; - } - - MM_Wait (40); - /* Check for data */ - ptr = (LM_UINT32 *) pBufferVirt; - for (j = 0; j < BufferSize / 4; j++) { - if (*ptr++ != j) { - if ((pDevice-> - DmaReadWriteCtrl & - DMA_CTRL_WRITE_BOUNDARY_MASK) - == DMA_CTRL_WRITE_BOUNDARY_DISABLE) { - pDevice->DmaReadWriteCtrl = - (pDevice-> - DmaReadWriteCtrl & - ~DMA_CTRL_WRITE_BOUNDARY_MASK) | - DMA_CTRL_WRITE_BOUNDARY_16; - REG_WR (pDevice, - PciCfg.DmaReadWriteCtrl, - pDevice->DmaReadWriteCtrl); - break; - } else { - return LM_STATUS_FAILURE; - } - } - } - if (j == (BufferSize / 4)) - dma_success = 1; - } - return LM_STATUS_SUCCESS; -} diff --git a/drivers/net/tigon3.h b/drivers/net/tigon3.h deleted file mode 100644 index 551107bc78..0000000000 --- a/drivers/net/tigon3.h +++ /dev/null @@ -1,3339 +0,0 @@ - -/******************************************************************************/ -/* */ -/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom */ -/* Corporation. */ -/* All rights reserved. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* History: */ -/* */ -/******************************************************************************/ - -#ifndef TIGON3_H -#define TIGON3_H - -#include "bcm570x_lm.h" -#if INCLUDE_TBI_SUPPORT -#include "bcm570x_autoneg.h" -#endif - -/* io defines */ -#if !defined(BIG_ENDIAN_HOST) -#define readl(addr) \ - (LONGSWAP((*(volatile unsigned int *)(addr)))) -#define writel(b,addr) \ - ((*(volatile unsigned int *)(addr)) = (LONGSWAP(b))) -#else -#if 0 /* !defined(PPC603) */ -#define readl(addr) (*(volatile unsigned int*)(0xa0000000 + (unsigned long)(addr))) -#define writel(b,addr) ((*(volatile unsigned int *) ((unsigned long)(addr) + 0xa0000000)) = (b)) -#else -#if 1 -#define readl(addr) (*(volatile unsigned int*)(addr)) -#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b)) -#else -extern int sprintf (char *buf, const char *f, ...); -static __inline unsigned int readl (void *addr) -{ - char buf[128]; - unsigned int tmp = (*(volatile unsigned int *)(addr)); - sprintf (buf, "%s:%s: read 0x%x from 0x%x\n", __FILE__, __LINE__, tmp, - addr, 0, 0); - sysSerialPrintString (buf); - return tmp; -} -static __inline void writel (unsigned int b, unsigned int addr) -{ - char buf[128]; - ((*(volatile unsigned int *)(addr)) = (b)); - sprintf (buf, "%s:%s: write 0x%x to 0x%x\n", __FILE__, __LINE__, b, - addr, 0, 0); - sysSerialPrintString (buf); -} -#endif -#endif /* PPC603 */ -#endif - -/******************************************************************************/ -/* Constants. */ -/******************************************************************************/ - -/* Maxim number of packet descriptors used for sending packets. */ -#define MAX_TX_PACKET_DESC_COUNT 600 -#define DEFAULT_TX_PACKET_DESC_COUNT 2 - -/* Maximum number of packet descriptors used for receiving packets. */ -#if T3_JUMBO_RCB_ENTRY_COUNT -#define MAX_RX_PACKET_DESC_COUNT \ - (T3_STD_RCV_RCB_ENTRY_COUNT + T3_JUMBO_RCV_RCB_ENTRY_COUNT) -#else -#define MAX_RX_PACKET_DESC_COUNT 800 -#endif -#define DEFAULT_RX_PACKET_DESC_COUNT 2 - -/* Threshhold for double copying small tx packets. 0 will disable double */ -/* copying of small Tx packets. */ -#define DEFAULT_TX_COPY_BUFFER_SIZE 0 -#define MIN_TX_COPY_BUFFER_SIZE 64 -#define MAX_TX_COPY_BUFFER_SIZE 512 - -/* Cache line. */ -#define COMMON_CACHE_LINE_SIZE 0x20 -#define COMMON_CACHE_LINE_MASK (COMMON_CACHE_LINE_SIZE-1) - -/* Maximum number of fragment we can handle. */ -#ifndef MAX_FRAGMENT_COUNT -#define MAX_FRAGMENT_COUNT 32 -#endif - -/* B0 bug. */ -#define BCM5700_BX_MIN_FRAG_SIZE 10 -#define BCM5700_BX_MIN_FRAG_BUF_SIZE 16 /* nice aligned size. */ -#define BCM5700_BX_MIN_FRAG_BUF_SIZE_MASK (BCM5700_BX_MIN_FRAG_BUF_SIZE-1) -#define BCM5700_BX_TX_COPY_BUF_SIZE (BCM5700_BX_MIN_FRAG_BUF_SIZE * \ - MAX_FRAGMENT_COUNT) - -/* MAGIC number. */ -/* #define T3_MAGIC_NUM 'KevT' */ -#define T3_FIRMWARE_MAILBOX 0x0b50 -#define T3_MAGIC_NUM 0x4B657654 -#define T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE 0x4861764b - -#define T3_NIC_DATA_SIG_ADDR 0x0b54 -#define T3_NIC_DATA_SIG 0x4b657654 - -#define T3_NIC_DATA_NIC_CFG_ADDR 0x0b58 -#define T3_NIC_CFG_LED_MODE_UNKNOWN BIT_NONE -#define T3_NIC_CFG_LED_MODE_TRIPLE_SPEED BIT_2 -#define T3_NIC_CFG_LED_MODE_LINK_SPEED BIT_3 -#define T3_NIC_CFG_LED_MODE_OPEN_DRAIN BIT_2 -#define T3_NIC_CFG_LED_MODE_OUTPUT BIT_3 -#define T3_NIC_CFG_LED_MODE_MASK (BIT_2 | BIT_3) -#define T3_NIC_CFG_PHY_TYPE_UNKNOWN BIT_NONE -#define T3_NIC_CFG_PHY_TYPE_COPPER BIT_4 -#define T3_NIC_CFG_PHY_TYPE_FIBER BIT_5 -#define T3_NIC_CFG_PHY_TYPE_MASK (BIT_4 | BIT_5) -#define T3_NIC_CFG_ENABLE_WOL BIT_6 -#define T3_NIC_CFG_ENABLE_ASF BIT_7 -#define T3_NIC_EEPROM_WP BIT_8 - -#define T3_NIC_DATA_PHY_ID_ADDR 0x0b74 -#define T3_NIC_PHY_ID1_MASK 0xffff0000 -#define T3_NIC_PHY_ID2_MASK 0x0000ffff - -#define T3_CMD_MAILBOX 0x0b78 -#define T3_CMD_NICDRV_ALIVE 0x01 -#define T3_CMD_NICDRV_PAUSE_FW 0x02 -#define T3_CMD_NICDRV_IPV4ADDR_CHANGE 0x03 -#define T3_CMD_NICDRV_IPV6ADDR_CHANGE 0x04 -#define T3_CMD_5703A0_FIX_DMAFW_DMAR 0x05 -#define T3_CMD_5703A0_FIX_DMAFW_DMAW 0x06 - -#define T3_CMD_LENGTH_MAILBOX 0x0b7c -#define T3_CMD_DATA_MAILBOX 0x0b80 - -#define T3_ASF_FW_STATUS_MAILBOX 0x0c00 - -#define T3_DRV_STATE_MAILBOX 0x0c04 -#define T3_DRV_STATE_START 0x01 -#define T3_DRV_STATE_UNLOAD 0x02 -#define T3_DRV_STATE_WOL 0x03 -#define T3_DRV_STATE_SUSPEND 0x04 - -#define T3_FW_RESET_TYPE_MAILBOX 0x0c08 - -#define T3_MAC_ADDR_HIGH_MAILBOX 0x0c14 -#define T3_MAC_ADDR_LOW_MAILBOX 0x0c18 - -/******************************************************************************/ -/* Hardware constants. */ -/******************************************************************************/ - -/* Number of entries in the send ring: must be 512. */ -#define T3_SEND_RCB_ENTRY_COUNT 512 -#define T3_SEND_RCB_ENTRY_COUNT_MASK (T3_SEND_RCB_ENTRY_COUNT-1) - -/* Number of send RCBs. May be 1-16 but for now, only support one. */ -#define T3_MAX_SEND_RCB_COUNT 16 - -/* Number of entries in the Standard Receive RCB. Must be 512 entries. */ -#define T3_STD_RCV_RCB_ENTRY_COUNT 512 -#define T3_STD_RCV_RCB_ENTRY_COUNT_MASK (T3_STD_RCV_RCB_ENTRY_COUNT-1) -#define DEFAULT_STD_RCV_DESC_COUNT 200 /* Must be < 512. */ -#define MAX_STD_RCV_BUFFER_SIZE 0x600 - -/* Number of entries in the Mini Receive RCB. This value can either be */ -/* 0, 1024. Currently Mini Receive RCB is disabled. */ -#ifndef T3_MINI_RCV_RCB_ENTRY_COUNT -#define T3_MINI_RCV_RCB_ENTRY_COUNT 0 -#endif /* T3_MINI_RCV_RCB_ENTRY_COUNT */ -#define T3_MINI_RCV_RCB_ENTRY_COUNT_MASK (T3_MINI_RCV_RCB_ENTRY_COUNT-1) -#define MAX_MINI_RCV_BUFFER_SIZE 512 -#define DEFAULT_MINI_RCV_BUFFER_SIZE 64 -#define DEFAULT_MINI_RCV_DESC_COUNT 100 /* Must be < 1024. */ - -/* Number of entries in the Jumbo Receive RCB. This value must 256 or 0. */ -/* Currently, Jumbo Receive RCB is disabled. */ -#ifndef T3_JUMBO_RCV_RCB_ENTRY_COUNT -#define T3_JUMBO_RCV_RCB_ENTRY_COUNT 0 -#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */ -#define T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK (T3_JUMBO_RCV_RCB_ENTRY_COUNT-1) - -#define MAX_JUMBO_RCV_BUFFER_SIZE (10 * 1024) /* > 1514 */ -#define DEFAULT_JUMBO_RCV_BUFFER_SIZE (4 * 1024) /* > 1514 */ -#define DEFAULT_JUMBO_RCV_DESC_COUNT 128 /* Must be < 256. */ - -#define MAX_JUMBO_TX_BUFFER_SIZE (8 * 1024) /* > 1514 */ -#define DEFAULT_JUMBO_TX_BUFFER_SIZE (4 * 1024) /* > 1514 */ - -/* Number of receive return RCBs. Maybe 1-16 but for now, only support one. */ -#define T3_MAX_RCV_RETURN_RCB_COUNT 16 - -/* Number of entries in a Receive Return ring. This value is either 1024 */ -/* or 2048. */ -#ifndef T3_RCV_RETURN_RCB_ENTRY_COUNT -#define T3_RCV_RETURN_RCB_ENTRY_COUNT 1024 -#endif /* T3_RCV_RETURN_RCB_ENTRY_COUNT */ -#define T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK (T3_RCV_RETURN_RCB_ENTRY_COUNT-1) - -/* Default coalescing parameters. */ -#define DEFAULT_RX_COALESCING_TICKS 100 -#define MAX_RX_COALESCING_TICKS 500 -#define DEFAULT_TX_COALESCING_TICKS 400 -#define MAX_TX_COALESCING_TICKS 500 -#define DEFAULT_RX_MAX_COALESCED_FRAMES 10 -#define MAX_RX_MAX_COALESCED_FRAMES 100 -#define ADAPTIVE_LO_RX_MAX_COALESCED_FRAMES 5 -#define ADAPTIVE_HI_RX_MAX_COALESCED_FRAMES 42 -#define ADAPTIVE_LO_RX_COALESCING_TICKS 50 -#define ADAPTIVE_HI_RX_COALESCING_TICKS 300 -#define ADAPTIVE_LO_PKT_THRESH 30000 -#define ADAPTIVE_HI_PKT_THRESH 74000 -#define DEFAULT_TX_MAX_COALESCED_FRAMES 40 -#define ADAPTIVE_LO_TX_MAX_COALESCED_FRAMES 25 -#define ADAPTIVE_HI_TX_MAX_COALESCED_FRAMES 75 -#define MAX_TX_MAX_COALESCED_FRAMES 100 - -#define DEFAULT_RX_COALESCING_TICKS_DURING_INT 25 -#define DEFAULT_TX_COALESCING_TICKS_DURING_INT 25 -#define DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT 5 -#define DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT 5 - -#define BAD_DEFAULT_VALUE 0xffffffff - -#define DEFAULT_STATS_COALESCING_TICKS 1000000 -#define MAX_STATS_COALESCING_TICKS 3600000000U - -/* Receive BD Replenish thresholds. */ -#define DEFAULT_RCV_STD_BD_REPLENISH_THRESHOLD 4 -#define DEFAULT_RCV_JUMBO_BD_REPLENISH_THRESHOLD 4 - -#define SPLIT_MODE_DISABLE 0 -#define SPLIT_MODE_ENABLE 1 - -#define SPLIT_MODE_5704_MAX_REQ 3 - -/* Maximum physical fragment size. */ -#define MAX_FRAGMENT_SIZE (64 * 1024) - -/* Standard view. */ -#define T3_STD_VIEW_SIZE (64 * 1024) -#define T3_FLAT_VIEW_SIZE (32 * 1024 * 1024) - -/* Buffer descriptor base address on the NIC's memory. */ - -#define T3_NIC_SND_BUFFER_DESC_ADDR 0x4000 -#define T3_NIC_STD_RCV_BUFFER_DESC_ADDR 0x6000 -#define T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR 0x7000 - -#define T3_NIC_STD_RCV_BUFFER_DESC_ADDR_EXT_MEM 0xc000 -#define T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR_EXT_MEM 0xd000 -#define T3_NIC_MINI_RCV_BUFFER_DESC_ADDR_EXT_MEM 0xe000 - -#define T3_NIC_SND_BUFFER_DESC_SIZE (T3_SEND_RCB_ENTRY_COUNT * \ - sizeof(T3_SND_BD) / 4) - -#define T3_NIC_STD_RCV_BUFFER_DESC_SIZE (T3_STD_RCV_RCB_ENTRY_COUNT * \ - sizeof(T3_RCV_BD) / 4) - -#define T3_NIC_JUMBO_RCV_BUFFER_DESC_SIZE (T3_JUMBO_RCV_RCB_ENTRY_COUNT * \ - sizeof(T3_EXT_RCV_BD) / 4) - -/* MBUF pool. */ -#define T3_NIC_MBUF_POOL_ADDR 0x8000 -/* #define T3_NIC_MBUF_POOL_SIZE 0x18000 */ -#define T3_NIC_MBUF_POOL_SIZE96 0x18000 -#define T3_NIC_MBUF_POOL_SIZE64 0x10000 - -#define T3_NIC_MBUF_POOL_ADDR_EXT_MEM 0x20000 - -/* DMA descriptor pool */ -#define T3_NIC_DMA_DESC_POOL_ADDR 0x2000 -#define T3_NIC_DMA_DESC_POOL_SIZE 0x2000 /* 8KB. */ - -#define T3_DEF_DMA_MBUF_LOW_WMARK 0x40 -#define T3_DEF_RX_MAC_MBUF_LOW_WMARK 0x20 -#define T3_DEF_MBUF_HIGH_WMARK 0x60 - -#define T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO 304 -#define T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO 152 -#define T3_DEF_MBUF_HIGH_WMARK_JUMBO 380 - -#define T3_DEF_DMA_DESC_LOW_WMARK 5 -#define T3_DEF_DMA_DESC_HIGH_WMARK 10 - -/* Maximum size of giant TCP packet can be sent */ -#define T3_TCP_SEG_MAX_OFFLOAD_SIZE 64*1000 -#define T3_TCP_SEG_MIN_NUM_SEG 20 - -#define T3_RX_CPU_ID 0x1 -#define T3_TX_CPU_ID 0x2 -#define T3_RX_CPU_SPAD_ADDR 0x30000 -#define T3_RX_CPU_SPAD_SIZE 0x4000 -#define T3_TX_CPU_SPAD_ADDR 0x34000 -#define T3_TX_CPU_SPAD_SIZE 0x4000 - -typedef struct T3_DIR_ENTRY { - PLM_UINT8 Buffer; - LM_UINT32 Offset; - LM_UINT32 Length; -} T3_DIR_ENTRY, *PT3_DIR_ENTRY; - -typedef struct T3_FWIMG_INFO { - LM_UINT32 StartAddress; - T3_DIR_ENTRY Text; - T3_DIR_ENTRY ROnlyData; - T3_DIR_ENTRY Data; - T3_DIR_ENTRY Sbss; - T3_DIR_ENTRY Bss; -} T3_FWIMG_INFO, *PT3_FWIMG_INFO; - -/******************************************************************************/ -/* Tigon3 PCI Registers. */ -/******************************************************************************/ -#define T3_PCI_ID_BCM5700 0x164414e4 -#define T3_PCI_ID_BCM5701 0x164514e4 -#define T3_PCI_ID_BCM5702 0x164614e4 -#define T3_PCI_ID_BCM5702x 0x16A614e4 -#define T3_PCI_ID_BCM5703 0x164714e4 -#define T3_PCI_ID_BCM5703x 0x16A714e4 -#define T3_PCI_ID_BCM5702FE 0x164D14e4 -#define T3_PCI_ID_BCM5704 0x164814e4 - -#define T3_PCI_VENDOR_ID (T3_PCI_ID & 0xffff) -#define T3_PCI_DEVICE_ID (T3_PCI_ID >> 16) - -#define T3_PCI_MISC_HOST_CTRL_REG 0x68 - -/* The most significant 16bit of register 0x68. */ -/* ChipId:4, ChipRev:4, MetalRev:8 */ -#define T3_CHIP_ID_5700_A0 0x7000 -#define T3_CHIP_ID_5700_A1 0x7001 -#define T3_CHIP_ID_5700_B0 0x7100 -#define T3_CHIP_ID_5700_B1 0x7101 -#define T3_CHIP_ID_5700_C0 0x7200 - -#define T3_CHIP_ID_5701_A0 0x0000 -#define T3_CHIP_ID_5701_B0 0x0100 -#define T3_CHIP_ID_5701_B2 0x0102 -#define T3_CHIP_ID_5701_B5 0x0105 - -#define T3_CHIP_ID_5703_A0 0x1000 -#define T3_CHIP_ID_5703_A1 0x1001 -#define T3_CHIP_ID_5703_A2 0x1002 - -#define T3_CHIP_ID_5704_A0 0x2000 - -/* Chip Id. */ -#define T3_ASIC_REV(_ChipRevId) ((_ChipRevId) >> 12) -#define T3_ASIC_REV_5700 0x07 -#define T3_ASIC_REV_5701 0x00 -#define T3_ASIC_REV_5703 0x01 -#define T3_ASIC_REV_5704 0x02 - -/* Chip id and revision. */ -#define T3_CHIP_REV(_ChipRevId) ((_ChipRevId) >> 8) -#define T3_CHIP_REV_5700_AX 0x70 -#define T3_CHIP_REV_5700_BX 0x71 -#define T3_CHIP_REV_5700_CX 0x72 -#define T3_CHIP_REV_5701_AX 0x00 - -/* Metal revision. */ -#define T3_METAL_REV(_ChipRevId) ((_ChipRevId) & 0xff) -#define T3_METAL_REV_A0 0x00 -#define T3_METAL_REV_A1 0x01 -#define T3_METAL_REV_B0 0x00 -#define T3_METAL_REV_B1 0x01 -#define T3_METAL_REV_B2 0x02 - -#define T3_PCI_REG_CLOCK_CTRL 0x74 - -#define T3_PCI_DISABLE_RX_CLOCK BIT_10 -#define T3_PCI_DISABLE_TX_CLOCK BIT_11 -#define T3_PCI_SELECT_ALTERNATE_CLOCK BIT_12 -#define T3_PCI_POWER_DOWN_PCI_PLL133 BIT_15 -#define T3_PCI_44MHZ_CORE_CLOCK BIT_18 - -#define T3_PCI_REG_ADDR_REG 0x78 -#define T3_PCI_REG_DATA_REG 0x80 - -#define T3_PCI_MEM_WIN_ADDR_REG 0x7c -#define T3_PCI_MEM_WIN_DATA_REG 0x84 - -#define T3_PCI_PM_CAP_REG 0x48 - -#define T3_PCI_PM_CAP_PME_D3COLD BIT_31 -#define T3_PCI_PM_CAP_PME_D3HOT BIT_30 - -#define T3_PCI_PM_STATUS_CTRL_REG 0x4c - -#define T3_PM_POWER_STATE_MASK (BIT_0 | BIT_1) -#define T3_PM_POWER_STATE_D0 BIT_NONE -#define T3_PM_POWER_STATE_D1 BIT_0 -#define T3_PM_POWER_STATE_D2 BIT_1 -#define T3_PM_POWER_STATE_D3 (BIT_0 | BIT_1) - -#define T3_PM_PME_ENABLE BIT_8 -#define T3_PM_PME_ASSERTED BIT_15 - -/* PCI state register. */ -#define T3_PCI_STATE_REG 0x70 - -#define T3_PCI_STATE_FORCE_RESET BIT_0 -#define T3_PCI_STATE_INT_NOT_ACTIVE BIT_1 -#define T3_PCI_STATE_CONVENTIONAL_PCI_MODE BIT_2 -#define T3_PCI_STATE_BUS_SPEED_HIGH BIT_3 -#define T3_PCI_STATE_32BIT_PCI_BUS BIT_4 - -/* Broadcom subsystem/subvendor IDs. */ -#define T3_SVID_BROADCOM 0x14e4 - -#define T3_SSID_BROADCOM_BCM95700A6 0x1644 -#define T3_SSID_BROADCOM_BCM95701A5 0x0001 -#define T3_SSID_BROADCOM_BCM95700T6 0x0002 /* BCM8002 */ -#define T3_SSID_BROADCOM_BCM95700A9 0x0003 /* Agilent */ -#define T3_SSID_BROADCOM_BCM95701T1 0x0005 -#define T3_SSID_BROADCOM_BCM95701T8 0x0006 -#define T3_SSID_BROADCOM_BCM95701A7 0x0007 /* Agilent */ -#define T3_SSID_BROADCOM_BCM95701A10 0x0008 -#define T3_SSID_BROADCOM_BCM95701A12 0x8008 -#define T3_SSID_BROADCOM_BCM95703Ax1 0x0009 -#define T3_SSID_BROADCOM_BCM95703Ax2 0x8009 - -/* 3COM subsystem/subvendor IDs. */ -#define T3_SVID_3COM 0x10b7 - -#define T3_SSID_3COM_3C996T 0x1000 -#define T3_SSID_3COM_3C996BT 0x1006 -#define T3_SSID_3COM_3C996CT 0x1002 -#define T3_SSID_3COM_3C997T 0x1003 -#define T3_SSID_3COM_3C1000T 0x1007 -#define T3_SSID_3COM_3C940BR01 0x1008 - -/* Fiber boards. */ -#define T3_SSID_3COM_3C996SX 0x1004 -#define T3_SSID_3COM_3C997SX 0x1005 - -/* Dell subsystem/subvendor IDs. */ - -#define T3_SVID_DELL 0x1028 - -#define T3_SSID_DELL_VIPER 0x00d1 -#define T3_SSID_DELL_JAGUAR 0x0106 -#define T3_SSID_DELL_MERLOT 0x0109 -#define T3_SSID_DELL_SLIM_MERLOT 0x010a - -/* Compaq subsystem/subvendor IDs */ - -#define T3_SVID_COMPAQ 0x0e11 - -#define T3_SSID_COMPAQ_BANSHEE 0x007c -#define T3_SSID_COMPAQ_BANSHEE_2 0x009a -#define T3_SSID_COMPAQ_CHANGELING 0x007d -#define T3_SSID_COMPAQ_NC7780 0x0085 -#define T3_SSID_COMPAQ_NC7780_2 0x0099 - -/******************************************************************************/ -/* MII registers. */ -/******************************************************************************/ - -/* Control register. */ -#define PHY_CTRL_REG 0x00 - -#define PHY_CTRL_SPEED_MASK (BIT_6 | BIT_13) -#define PHY_CTRL_SPEED_SELECT_10MBPS BIT_NONE -#define PHY_CTRL_SPEED_SELECT_100MBPS BIT_13 -#define PHY_CTRL_SPEED_SELECT_1000MBPS BIT_6 -#define PHY_CTRL_COLLISION_TEST_ENABLE BIT_7 -#define PHY_CTRL_FULL_DUPLEX_MODE BIT_8 -#define PHY_CTRL_RESTART_AUTO_NEG BIT_9 -#define PHY_CTRL_ISOLATE_PHY BIT_10 -#define PHY_CTRL_LOWER_POWER_MODE BIT_11 -#define PHY_CTRL_AUTO_NEG_ENABLE BIT_12 -#define PHY_CTRL_LOOPBACK_MODE BIT_14 -#define PHY_CTRL_PHY_RESET BIT_15 - -/* Status register. */ -#define PHY_STATUS_REG 0x01 - -#define PHY_STATUS_LINK_PASS BIT_2 -#define PHY_STATUS_AUTO_NEG_COMPLETE BIT_5 - -/* Phy Id registers. */ -#define PHY_ID1_REG 0x02 -#define PHY_ID1_OUI_MASK 0xffff - -#define PHY_ID2_REG 0x03 -#define PHY_ID2_REV_MASK 0x000f -#define PHY_ID2_MODEL_MASK 0x03f0 -#define PHY_ID2_OUI_MASK 0xfc00 - -/* Auto-negotiation advertisement register. */ -#define PHY_AN_AD_REG 0x04 - -#define PHY_AN_AD_ASYM_PAUSE BIT_11 -#define PHY_AN_AD_PAUSE_CAPABLE BIT_10 -#define PHY_AN_AD_10BASET_HALF BIT_5 -#define PHY_AN_AD_10BASET_FULL BIT_6 -#define PHY_AN_AD_100BASETX_HALF BIT_7 -#define PHY_AN_AD_100BASETX_FULL BIT_8 -#define PHY_AN_AD_PROTOCOL_802_3_CSMA_CD 0x01 - -/* Auto-negotiation Link Partner Ability register. */ -#define PHY_LINK_PARTNER_ABILITY_REG 0x05 - -#define PHY_LINK_PARTNER_ASYM_PAUSE BIT_11 -#define PHY_LINK_PARTNER_PAUSE_CAPABLE BIT_10 - -/* Auto-negotiation expansion register. */ -#define PHY_AN_EXPANSION_REG 0x06 - -/******************************************************************************/ -/* BCM5400 and BCM5401 phy info. */ -/******************************************************************************/ - -#define PHY_DEVICE_ID 1 - -/* OUI: bit 31-10; Model#: bit 9-4; Rev# bit 3-0. */ -#define PHY_UNKNOWN_PHY 0x00000000 -#define PHY_BCM5400_PHY_ID 0x60008040 -#define PHY_BCM5401_PHY_ID 0x60008050 -#define PHY_BCM5411_PHY_ID 0x60008070 -#define PHY_BCM5701_PHY_ID 0x60008110 -#define PHY_BCM5703_PHY_ID 0x60008160 -#define PHY_BCM5704_PHY_ID 0x60008190 -#define PHY_BCM8002_PHY_ID 0x60010140 - -#define PHY_BCM5401_B0_REV 0x1 -#define PHY_BCM5401_B2_REV 0x3 -#define PHY_BCM5401_C0_REV 0x6 - -#define PHY_ID_OUI_MASK 0xfffffc00 -#define PHY_ID_MODEL_MASK 0x000003f0 -#define PHY_ID_REV_MASK 0x0000000f -#define PHY_ID_MASK (PHY_ID_OUI_MASK | \ - PHY_ID_MODEL_MASK) - -#define UNKNOWN_PHY_ID(x) ((((x) & PHY_ID_MASK) != PHY_BCM5400_PHY_ID) && \ - (((x) & PHY_ID_MASK) != PHY_BCM5401_PHY_ID) && \ - (((x) & PHY_ID_MASK) != PHY_BCM5411_PHY_ID) && \ - (((x) & PHY_ID_MASK) != PHY_BCM5701_PHY_ID) && \ - (((x) & PHY_ID_MASK) != PHY_BCM5703_PHY_ID) && \ - (((x) & PHY_ID_MASK) != PHY_BCM5704_PHY_ID) && \ - (((x) & PHY_ID_MASK) != PHY_BCM8002_PHY_ID)) - -/* 1000Base-T control register. */ -#define BCM540X_1000BASET_CTRL_REG 0x09 - -#define BCM540X_AN_AD_1000BASET_HALF BIT_8 -#define BCM540X_AN_AD_1000BASET_FULL BIT_9 -#define BCM540X_CONFIG_AS_MASTER BIT_11 -#define BCM540X_ENABLE_CONFIG_AS_MASTER BIT_12 - -/* Extended control register. */ -#define BCM540X_EXT_CTRL_REG 0x10 - -#define BCM540X_EXT_CTRL_LINK3_LED_MODE BIT_1 -#define BCM540X_EXT_CTRL_TBI BIT_15 - -/* PHY extended status register. */ -#define BCM540X_EXT_STATUS_REG 0x11 - -#define BCM540X_EXT_STATUS_LINK_PASS BIT_8 - -/* DSP Coefficient Read/Write Port. */ -#define BCM540X_DSP_RW_PORT 0x15 - -/* DSP Coeficient Address Register. */ -#define BCM540X_DSP_ADDRESS_REG 0x17 - -#define BCM540X_DSP_TAP_NUMBER_MASK 0x00 -#define BCM540X_DSP_AGC_A 0x00 -#define BCM540X_DSP_AGC_B 0x01 -#define BCM540X_DSP_MSE_PAIR_STATUS 0x02 -#define BCM540X_DSP_SOFT_DECISION 0x03 -#define BCM540X_DSP_PHASE_REG 0x04 -#define BCM540X_DSP_SKEW 0x05 -#define BCM540X_DSP_POWER_SAVER_UPPER_BOUND 0x06 -#define BCM540X_DSP_POWER_SAVER_LOWER_BOUND 0x07 -#define BCM540X_DSP_LAST_ECHO 0x08 -#define BCM540X_DSP_FREQUENCY 0x09 -#define BCM540X_DSP_PLL_BANDWIDTH 0x0a -#define BCM540X_DSP_PLL_PHASE_OFFSET 0x0b - -#define BCM540X_DSP_FILTER_DCOFFSET (BIT_10 | BIT_11) -#define BCM540X_DSP_FILTER_FEXT3 (BIT_8 | BIT_9 | BIT_11) -#define BCM540X_DSP_FILTER_FEXT2 (BIT_9 | BIT_11) -#define BCM540X_DSP_FILTER_FEXT1 (BIT_8 | BIT_11) -#define BCM540X_DSP_FILTER_FEXT0 BIT_11 -#define BCM540X_DSP_FILTER_NEXT3 (BIT_8 | BIT_9 | BIT_10) -#define BCM540X_DSP_FILTER_NEXT2 (BIT_9 | BIT_10) -#define BCM540X_DSP_FILTER_NEXT1 (BIT_8 | BIT_10) -#define BCM540X_DSP_FILTER_NEXT0 BIT_10 -#define BCM540X_DSP_FILTER_ECHO (BIT_8 | BIT_9) -#define BCM540X_DSP_FILTER_DFE BIT_9 -#define BCM540X_DSP_FILTER_FFE BIT_8 - -#define BCM540X_DSP_CONTROL_ALL_FILTERS BIT_12 - -#define BCM540X_DSP_SEL_CH_0 BIT_NONE -#define BCM540X_DSP_SEL_CH_1 BIT_13 -#define BCM540X_DSP_SEL_CH_2 BIT_14 -#define BCM540X_DSP_SEL_CH_3 (BIT_13 | BIT_14) - -#define BCM540X_CONTROL_ALL_CHANNELS BIT_15 - -/* Auxilliary Control Register (Shadow Register) */ -#define BCM5401_AUX_CTRL 0x18 - -#define BCM5401_SHADOW_SEL_MASK 0x7 -#define BCM5401_SHADOW_SEL_NORMAL 0x00 -#define BCM5401_SHADOW_SEL_10BASET 0x01 -#define BCM5401_SHADOW_SEL_POWER_CONTROL 0x02 -#define BCM5401_SHADOW_SEL_IP_PHONE 0x03 -#define BCM5401_SHADOW_SEL_MISC_TEST1 0x04 -#define BCM5401_SHADOW_SEL_MISC_TEST2 0x05 -#define BCM5401_SHADOW_SEL_IP_PHONE_SEED 0x06 - -/* Shadow register selector == '000' */ -#define BCM5401_SHDW_NORMAL_DIAG_MODE BIT_3 -#define BCM5401_SHDW_NORMAL_DISABLE_MBP BIT_4 -#define BCM5401_SHDW_NORMAL_DISABLE_LOW_PWR BIT_5 -#define BCM5401_SHDW_NORMAL_DISABLE_INV_PRF BIT_6 -#define BCM5401_SHDW_NORMAL_DISABLE_PRF BIT_7 -#define BCM5401_SHDW_NORMAL_RX_SLICING_NORMAL BIT_NONE -#define BCM5401_SHDW_NORMAL_RX_SLICING_4D BIT_8 -#define BCM5401_SHDW_NORMAL_RX_SLICING_3LVL_1D BIT_9 -#define BCM5401_SHDW_NORMAL_RX_SLICING_5LVL_1D (BIT_8 | BIT_9) -#define BCM5401_SHDW_NORMAL_TX_6DB_CODING BIT_10 -#define BCM5401_SHDW_NORMAL_ENABLE_SM_DSP_CLOCK BIT_11 -#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_4NS BIT_NONE -#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_5NS BIT_12 -#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_3NS BIT_13 -#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_0NS (BIT_12 | BIT_13) -#define BCM5401_SHDW_NORMAL_EXT_PACKET_LENGTH BIT_14 -#define BCM5401_SHDW_NORMAL_EXTERNAL_LOOPBACK BIT_15 - -/* Auxilliary status summary. */ -#define BCM540X_AUX_STATUS_REG 0x19 - -#define BCM540X_AUX_LINK_PASS BIT_2 -#define BCM540X_AUX_SPEED_MASK (BIT_8 | BIT_9 | BIT_10) -#define BCM540X_AUX_10BASET_HD BIT_8 -#define BCM540X_AUX_10BASET_FD BIT_9 -#define BCM540X_AUX_100BASETX_HD (BIT_8 | BIT_9) -#define BCM540X_AUX_100BASET4 BIT_10 -#define BCM540X_AUX_100BASETX_FD (BIT_8 | BIT_10) -#define BCM540X_AUX_100BASET_HD (BIT_9 | BIT_10) -#define BCM540X_AUX_100BASET_FD (BIT_8 | BIT_9 | BIT_10) - -/* Interrupt status. */ -#define BCM540X_INT_STATUS_REG 0x1a - -#define BCM540X_INT_LINK_CHANGE BIT_1 -#define BCM540X_INT_SPEED_CHANGE BIT_2 -#define BCM540X_INT_DUPLEX_CHANGE BIT_3 -#define BCM540X_INT_AUTO_NEG_PAGE_RX BIT_10 - -/* Interrupt mask register. */ -#define BCM540X_INT_MASK_REG 0x1b - -/******************************************************************************/ -/* Register definitions. */ -/******************************************************************************/ - -typedef volatile LM_UINT8 T3_8BIT_REGISTER, *PT3_8BIT_REGISTER; -typedef volatile LM_UINT16 T3_16BIT_REGISTER, *PT3_16BIT_REGISTER; -typedef volatile LM_UINT32 T3_32BIT_REGISTER, *PT3_32BIT_REGISTER; - -typedef struct { - /* Big endian format. */ - T3_32BIT_REGISTER High; - T3_32BIT_REGISTER Low; -} T3_64BIT_REGISTER, *PT3_64BIT_REGISTER; - -typedef T3_64BIT_REGISTER T3_64BIT_HOST_ADDR, *PT3_64BIT_HOST_ADDR; - -#define T3_NUM_OF_DMA_DESC 256 -#define T3_NUM_OF_MBUF 768 - -typedef struct { - T3_64BIT_REGISTER host_addr; - T3_32BIT_REGISTER nic_mbuf; - T3_16BIT_REGISTER len; - T3_16BIT_REGISTER cqid_sqid; - T3_32BIT_REGISTER flags; - T3_32BIT_REGISTER opaque1; - T3_32BIT_REGISTER opaque2; - T3_32BIT_REGISTER opaque3; -} T3_DMA_DESC, *PT3_DMA_DESC; - -/******************************************************************************/ -/* Ring control block. */ -/******************************************************************************/ - -typedef struct { - T3_64BIT_REGISTER HostRingAddr; - - union { - struct { -#ifdef BIG_ENDIAN_HOST - T3_16BIT_REGISTER MaxLen; - T3_16BIT_REGISTER Flags; -#else /* BIG_ENDIAN_HOST */ - T3_16BIT_REGISTER Flags; - T3_16BIT_REGISTER MaxLen; -#endif - } s; - - T3_32BIT_REGISTER MaxLen_Flags; - } u; - - T3_32BIT_REGISTER NicRingAddr; -} T3_RCB, *PT3_RCB; - -#define T3_RCB_FLAG_USE_EXT_RECV_BD BIT_0 -#define T3_RCB_FLAG_RING_DISABLED BIT_1 - -/******************************************************************************/ -/* Status block. */ -/******************************************************************************/ - -/* - * Size of status block is actually 0x50 bytes. Use 0x80 bytes for - * cache line alignment. - */ -#define T3_STATUS_BLOCK_SIZE 0x80 - -typedef struct { - volatile LM_UINT32 Status; -#define STATUS_BLOCK_UPDATED BIT_0 -#define STATUS_BLOCK_LINK_CHANGED_STATUS BIT_1 -#define STATUS_BLOCK_ERROR BIT_2 - - volatile LM_UINT32 StatusTag; - -#ifdef BIG_ENDIAN_HOST - volatile LM_UINT16 RcvStdConIdx; - volatile LM_UINT16 RcvJumboConIdx; - - volatile LM_UINT16 Reserved2; - volatile LM_UINT16 RcvMiniConIdx; - - struct { - volatile LM_UINT16 SendConIdx; /* Send consumer index. */ - volatile LM_UINT16 RcvProdIdx; /* Receive producer index. */ - } Idx[16]; -#else /* BIG_ENDIAN_HOST */ - volatile LM_UINT16 RcvJumboConIdx; - volatile LM_UINT16 RcvStdConIdx; - - volatile LM_UINT16 RcvMiniConIdx; - volatile LM_UINT16 Reserved2; - - struct { - volatile LM_UINT16 RcvProdIdx; /* Receive producer index. */ - volatile LM_UINT16 SendConIdx; /* Send consumer index. */ - } Idx[16]; -#endif -} T3_STATUS_BLOCK, *PT3_STATUS_BLOCK; - -/******************************************************************************/ -/* Receive buffer descriptors. */ -/******************************************************************************/ - -typedef struct { - T3_64BIT_HOST_ADDR HostAddr; - -#ifdef BIG_ENDIAN_HOST - volatile LM_UINT16 Index; - volatile LM_UINT16 Len; - - volatile LM_UINT16 Type; - volatile LM_UINT16 Flags; - - volatile LM_UINT16 IpCksum; - volatile LM_UINT16 TcpUdpCksum; - - volatile LM_UINT16 ErrorFlag; - volatile LM_UINT16 VlanTag; -#else /* BIG_ENDIAN_HOST */ - volatile LM_UINT16 Len; - volatile LM_UINT16 Index; - - volatile LM_UINT16 Flags; - volatile LM_UINT16 Type; - - volatile LM_UINT16 TcpUdpCksum; - volatile LM_UINT16 IpCksum; - - volatile LM_UINT16 VlanTag; - volatile LM_UINT16 ErrorFlag; -#endif - - volatile LM_UINT32 Reserved; - volatile LM_UINT32 Opaque; -} T3_RCV_BD, *PT3_RCV_BD; - -typedef struct { - T3_64BIT_HOST_ADDR HostAddr[3]; - -#ifdef BIG_ENDIAN_HOST - LM_UINT16 Len1; - LM_UINT16 Len2; - - LM_UINT16 Len3; - LM_UINT16 Reserved1; -#else /* BIG_ENDIAN_HOST */ - LM_UINT16 Len2; - LM_UINT16 Len1; - - LM_UINT16 Reserved1; - LM_UINT16 Len3; -#endif - - T3_RCV_BD StdRcvBd; -} T3_EXT_RCV_BD, *PT3_EXT_RCV_BD; - -/* Error flags. */ -#define RCV_BD_ERR_BAD_CRC 0x0001 -#define RCV_BD_ERR_COLL_DETECT 0x0002 -#define RCV_BD_ERR_LINK_LOST_DURING_PKT 0x0004 -#define RCV_BD_ERR_PHY_DECODE_ERR 0x0008 -#define RCV_BD_ERR_ODD_NIBBLED_RCVD_MII 0x0010 -#define RCV_BD_ERR_MAC_ABORT 0x0020 -#define RCV_BD_ERR_LEN_LT_64 0x0040 -#define RCV_BD_ERR_TRUNC_NO_RESOURCES 0x0080 -#define RCV_BD_ERR_GIANT_FRAME_RCVD 0x0100 - -/* Buffer descriptor flags. */ -#define RCV_BD_FLAG_END 0x0004 -#define RCV_BD_FLAG_JUMBO_RING 0x0020 -#define RCV_BD_FLAG_VLAN_TAG 0x0040 -#define RCV_BD_FLAG_FRAME_HAS_ERROR 0x0400 -#define RCV_BD_FLAG_MINI_RING 0x0800 -#define RCV_BD_FLAG_IP_CHKSUM_FIELD 0x1000 -#define RCV_BD_FLAG_TCP_UDP_CHKSUM_FIELD 0x2000 -#define RCV_BD_FLAG_TCP_PACKET 0x4000 - -/******************************************************************************/ -/* Send buffer descriptor. */ -/******************************************************************************/ - -typedef struct { - T3_64BIT_HOST_ADDR HostAddr; - - union { - struct { -#ifdef BIG_ENDIAN_HOST - LM_UINT16 Len; - LM_UINT16 Flags; -#else /* BIG_ENDIAN_HOST */ - LM_UINT16 Flags; - LM_UINT16 Len; -#endif - } s1; - - LM_UINT32 Len_Flags; - } u1; - - union { - struct { -#ifdef BIG_ENDIAN_HOST - LM_UINT16 Reserved; - LM_UINT16 VlanTag; -#else /* BIG_ENDIAN_HOST */ - LM_UINT16 VlanTag; - LM_UINT16 Reserved; -#endif - } s2; - - LM_UINT32 VlanTag; - } u2; -} T3_SND_BD, *PT3_SND_BD; - -/* Send buffer descriptor flags. */ -#define SND_BD_FLAG_TCP_UDP_CKSUM 0x0001 -#define SND_BD_FLAG_IP_CKSUM 0x0002 -#define SND_BD_FLAG_END 0x0004 -#define SND_BD_FLAG_IP_FRAG 0x0008 -#define SND_BD_FLAG_IP_FRAG_END 0x0010 -#define SND_BD_FLAG_VLAN_TAG 0x0040 -#define SND_BD_FLAG_COAL_NOW 0x0080 -#define SND_BD_FLAG_CPU_PRE_DMA 0x0100 -#define SND_BD_FLAG_CPU_POST_DMA 0x0200 -#define SND_BD_FLAG_INSERT_SRC_ADDR 0x1000 -#define SND_BD_FLAG_CHOOSE_SRC_ADDR 0x6000 -#define SND_BD_FLAG_DONT_GEN_CRC 0x8000 - -/* MBUFs */ -typedef struct T3_MBUF_FRAME_DESC { -#ifdef BIG_ENDIAN_HOST - LM_UINT32 status_control; - union { - struct { - LM_UINT8 cqid; - LM_UINT8 reserved1; - LM_UINT16 length; - } s1; - LM_UINT32 word; - } u1; - union { - struct { - LM_UINT16 ip_hdr_start; - LM_UINT16 tcp_udp_hdr_start; - } s2; - - LM_UINT32 word; - } u2; - - union { - struct { - LM_UINT16 data_start; - LM_UINT16 vlan_id; - } s3; - - LM_UINT32 word; - } u3; - - union { - struct { - LM_UINT16 ip_checksum; - LM_UINT16 tcp_udp_checksum; - } s4; - - LM_UINT32 word; - } u4; - - union { - struct { - LM_UINT16 pseudo_checksum; - LM_UINT16 checksum_status; - } s5; - - LM_UINT32 word; - } u5; - - union { - struct { - LM_UINT16 rule_match; - LM_UINT8 class; - LM_UINT8 rupt; - } s6; - - LM_UINT32 word; - } u6; - - union { - struct { - LM_UINT16 reserved2; - LM_UINT16 mbuf_num; - } s7; - - LM_UINT32 word; - } u7; - - LM_UINT32 reserved3; - LM_UINT32 reserved4; -#else - LM_UINT32 status_control; - union { - struct { - LM_UINT16 length; - LM_UINT8 reserved1; - LM_UINT8 cqid; - } s1; - LM_UINT32 word; - } u1; - union { - struct { - LM_UINT16 tcp_udp_hdr_start; - LM_UINT16 ip_hdr_start; - } s2; - - LM_UINT32 word; - } u2; - - union { - struct { - LM_UINT16 vlan_id; - LM_UINT16 data_start; - } s3; - - LM_UINT32 word; - } u3; - - union { - struct { - LM_UINT16 tcp_udp_checksum; - LM_UINT16 ip_checksum; - } s4; - - LM_UINT32 word; - } u4; - - union { - struct { - LM_UINT16 checksum_status; - LM_UINT16 pseudo_checksum; - } s5; - - LM_UINT32 word; - } u5; - - union { - struct { - LM_UINT8 rupt; - LM_UINT8 class; - LM_UINT16 rule_match; - } s6; - - LM_UINT32 word; - } u6; - - union { - struct { - LM_UINT16 mbuf_num; - LM_UINT16 reserved2; - } s7; - - LM_UINT32 word; - } u7; - - LM_UINT32 reserved3; - LM_UINT32 reserved4; -#endif -} T3_MBUF_FRAME_DESC, *PT3_MBUF_FRAME_DESC; - -typedef struct T3_MBUF_HDR { - union { - struct { - unsigned int C:1; - unsigned int F:1; - unsigned int reserved1:7; - unsigned int next_mbuf:16; - unsigned int length:7; - } s1; - - LM_UINT32 word; - } u1; - - LM_UINT32 next_frame_ptr; -} T3_MBUF_HDR, *PT3_MBUF_HDR; - -typedef struct T3_MBUF { - T3_MBUF_HDR hdr; - union { - struct { - T3_MBUF_FRAME_DESC frame_hdr; - LM_UINT32 data[20]; - } s1; - - struct { - LM_UINT32 data[30]; - } s2; - } body; -} T3_MBUF, *PT3_MBUF; - -#define T3_MBUF_BASE (T3_NIC_MBUF_POOL_ADDR >> 7) -#define T3_MBUF_END ((T3_NIC_MBUF_POOL_ADDR + T3_NIC_MBUF_POOL_SIZE) >> 7) - -/******************************************************************************/ -/* Statistics block. */ -/******************************************************************************/ - -typedef struct { - LM_UINT8 Reserved0[0x400 - 0x300]; - - /* Statistics maintained by Receive MAC. */ - T3_64BIT_REGISTER ifHCInOctets; - T3_64BIT_REGISTER Reserved1; - T3_64BIT_REGISTER etherStatsFragments; - T3_64BIT_REGISTER ifHCInUcastPkts; - T3_64BIT_REGISTER ifHCInMulticastPkts; - T3_64BIT_REGISTER ifHCInBroadcastPkts; - T3_64BIT_REGISTER dot3StatsFCSErrors; - T3_64BIT_REGISTER dot3StatsAlignmentErrors; - T3_64BIT_REGISTER xonPauseFramesReceived; - T3_64BIT_REGISTER xoffPauseFramesReceived; - T3_64BIT_REGISTER macControlFramesReceived; - T3_64BIT_REGISTER xoffStateEntered; - T3_64BIT_REGISTER dot3StatsFramesTooLong; - T3_64BIT_REGISTER etherStatsJabbers; - T3_64BIT_REGISTER etherStatsUndersizePkts; - T3_64BIT_REGISTER inRangeLengthError; - T3_64BIT_REGISTER outRangeLengthError; - T3_64BIT_REGISTER etherStatsPkts64Octets; - T3_64BIT_REGISTER etherStatsPkts65Octetsto127Octets; - T3_64BIT_REGISTER etherStatsPkts128Octetsto255Octets; - T3_64BIT_REGISTER etherStatsPkts256Octetsto511Octets; - T3_64BIT_REGISTER etherStatsPkts512Octetsto1023Octets; - T3_64BIT_REGISTER etherStatsPkts1024Octetsto1522Octets; - T3_64BIT_REGISTER etherStatsPkts1523Octetsto2047Octets; - T3_64BIT_REGISTER etherStatsPkts2048Octetsto4095Octets; - T3_64BIT_REGISTER etherStatsPkts4096Octetsto8191Octets; - T3_64BIT_REGISTER etherStatsPkts8192Octetsto9022Octets; - - T3_64BIT_REGISTER Unused1[37]; - - /* Statistics maintained by Transmit MAC. */ - T3_64BIT_REGISTER ifHCOutOctets; - T3_64BIT_REGISTER Reserved2; - T3_64BIT_REGISTER etherStatsCollisions; - T3_64BIT_REGISTER outXonSent; - T3_64BIT_REGISTER outXoffSent; - T3_64BIT_REGISTER flowControlDone; - T3_64BIT_REGISTER dot3StatsInternalMacTransmitErrors; - T3_64BIT_REGISTER dot3StatsSingleCollisionFrames; - T3_64BIT_REGISTER dot3StatsMultipleCollisionFrames; - T3_64BIT_REGISTER dot3StatsDeferredTransmissions; - T3_64BIT_REGISTER Reserved3; - T3_64BIT_REGISTER dot3StatsExcessiveCollisions; - T3_64BIT_REGISTER dot3StatsLateCollisions; - T3_64BIT_REGISTER dot3Collided2Times; - T3_64BIT_REGISTER dot3Collided3Times; - T3_64BIT_REGISTER dot3Collided4Times; - T3_64BIT_REGISTER dot3Collided5Times; - T3_64BIT_REGISTER dot3Collided6Times; - T3_64BIT_REGISTER dot3Collided7Times; - T3_64BIT_REGISTER dot3Collided8Times; - T3_64BIT_REGISTER dot3Collided9Times; - T3_64BIT_REGISTER dot3Collided10Times; - T3_64BIT_REGISTER dot3Collided11Times; - T3_64BIT_REGISTER dot3Collided12Times; - T3_64BIT_REGISTER dot3Collided13Times; - T3_64BIT_REGISTER dot3Collided14Times; - T3_64BIT_REGISTER dot3Collided15Times; - T3_64BIT_REGISTER ifHCOutUcastPkts; - T3_64BIT_REGISTER ifHCOutMulticastPkts; - T3_64BIT_REGISTER ifHCOutBroadcastPkts; - T3_64BIT_REGISTER dot3StatsCarrierSenseErrors; - T3_64BIT_REGISTER ifOutDiscards; - T3_64BIT_REGISTER ifOutErrors; - - T3_64BIT_REGISTER Unused2[31]; - - /* Statistics maintained by Receive List Placement. */ - T3_64BIT_REGISTER COSIfHCInPkts[16]; - T3_64BIT_REGISTER COSFramesDroppedDueToFilters; - T3_64BIT_REGISTER nicDmaWriteQueueFull; - T3_64BIT_REGISTER nicDmaWriteHighPriQueueFull; - T3_64BIT_REGISTER nicNoMoreRxBDs; - T3_64BIT_REGISTER ifInDiscards; - T3_64BIT_REGISTER ifInErrors; - T3_64BIT_REGISTER nicRecvThresholdHit; - - T3_64BIT_REGISTER Unused3[9]; - - /* Statistics maintained by Send Data Initiator. */ - T3_64BIT_REGISTER COSIfHCOutPkts[16]; - T3_64BIT_REGISTER nicDmaReadQueueFull; - T3_64BIT_REGISTER nicDmaReadHighPriQueueFull; - T3_64BIT_REGISTER nicSendDataCompQueueFull; - - /* Statistics maintained by Host Coalescing. */ - T3_64BIT_REGISTER nicRingSetSendProdIndex; - T3_64BIT_REGISTER nicRingStatusUpdate; - T3_64BIT_REGISTER nicInterrupts; - T3_64BIT_REGISTER nicAvoidedInterrupts; - T3_64BIT_REGISTER nicSendThresholdHit; - - LM_UINT8 Reserved4[0xb00 - 0x9c0]; -} T3_STATS_BLOCK, *PT3_STATS_BLOCK; - -/******************************************************************************/ -/* PCI configuration registers. */ -/******************************************************************************/ - -typedef struct { - T3_16BIT_REGISTER VendorId; - T3_16BIT_REGISTER DeviceId; - - T3_16BIT_REGISTER Command; - T3_16BIT_REGISTER Status; - - T3_32BIT_REGISTER ClassCodeRevId; - - T3_8BIT_REGISTER CacheLineSize; - T3_8BIT_REGISTER LatencyTimer; - T3_8BIT_REGISTER HeaderType; - T3_8BIT_REGISTER Bist; - - T3_32BIT_REGISTER MemBaseAddrLow; - T3_32BIT_REGISTER MemBaseAddrHigh; - - LM_UINT8 Unused1[20]; - - T3_16BIT_REGISTER SubsystemVendorId; - T3_16BIT_REGISTER SubsystemId; - - T3_32BIT_REGISTER RomBaseAddr; - - T3_8BIT_REGISTER PciXCapiblityPtr; - LM_UINT8 Unused2[7]; - - T3_8BIT_REGISTER IntLine; - T3_8BIT_REGISTER IntPin; - T3_8BIT_REGISTER MinGnt; - T3_8BIT_REGISTER MaxLat; - - T3_8BIT_REGISTER PciXCapabilities; - T3_8BIT_REGISTER PmCapabilityPtr; - T3_16BIT_REGISTER PciXCommand; - - T3_32BIT_REGISTER PciXStatus; - - T3_8BIT_REGISTER PmCapabilityId; - T3_8BIT_REGISTER VpdCapabilityPtr; - T3_16BIT_REGISTER PmCapabilities; - - T3_16BIT_REGISTER PmCtrlStatus; -#define PM_CTRL_PME_STATUS BIT_15 -#define PM_CTRL_PME_ENABLE BIT_8 -#define PM_CTRL_PME_POWER_STATE_D0 0 -#define PM_CTRL_PME_POWER_STATE_D1 1 -#define PM_CTRL_PME_POWER_STATE_D2 2 -#define PM_CTRL_PME_POWER_STATE_D3H 3 - - T3_8BIT_REGISTER BridgeSupportExt; - T3_8BIT_REGISTER PmData; - - T3_8BIT_REGISTER VpdCapabilityId; - T3_8BIT_REGISTER MsiCapabilityPtr; - T3_16BIT_REGISTER VpdAddrFlag; -#define VPD_FLAG_WRITE (1 << 15) -#define VPD_FLAG_RW_MASK (1 << 15) -#define VPD_FLAG_READ 0 - - T3_32BIT_REGISTER VpdData; - - T3_8BIT_REGISTER MsiCapabilityId; - T3_8BIT_REGISTER NextCapabilityPtr; - T3_16BIT_REGISTER MsiCtrl; -#define MSI_CTRL_64BIT_CAP (1 << 7) -#define MSI_CTRL_MSG_ENABLE(x) (x << 4) -#define MSI_CTRL_MSG_CAP(x) (x << 1) -#define MSI_CTRL_ENABLE (1 << 0) - - T3_32BIT_REGISTER MsiAddrLow; - T3_32BIT_REGISTER MsiAddrHigh; - - T3_16BIT_REGISTER MsiData; - T3_16BIT_REGISTER Unused3; - - T3_32BIT_REGISTER MiscHostCtrl; -#define MISC_HOST_CTRL_CLEAR_INT BIT_0 -#define MISC_HOST_CTRL_MASK_PCI_INT BIT_1 -#define MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP BIT_2 -#define MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP BIT_3 -#define MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW BIT_4 -#define MISC_HOST_CTRL_ENABLE_CLK_REG_RW BIT_5 -#define MISC_HOST_CTRL_ENABLE_REG_WORD_SWAP BIT_6 -#define MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS BIT_7 -#define MISC_HOST_CTRL_ENABLE_INT_MASK_MODE BIT_8 -#define MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE BIT_9 - - T3_32BIT_REGISTER DmaReadWriteCtrl; -#define DMA_CTRL_WRITE_BOUNDARY_MASK (BIT_11 | BIT_12 | BIT_13) -#define DMA_CTRL_WRITE_BOUNDARY_DISABLE 0 -#define DMA_CTRL_WRITE_BOUNDARY_16 BIT_11 -#define DMA_CTRL_WRITE_BOUNDARY_32 BIT_12 -#define DMA_CTRL_WRITE_BOUNDARY_64 (BIT_12 | BIT_11) -#define DMA_CTRL_WRITE_BOUNDARY_128 BIT_13 -#define DMA_CTRL_WRITE_BOUNDARY_256 (BIT_13 | BIT_11) -#define DMA_CTRL_WRITE_BOUNDARY_512 (BIT_13 | BIT_12) -#define DMA_CTRL_WRITE_BOUNDARY_1024 (BIT_13 | BIT_12 | BIT_11) -#define DMA_CTRL_WRITE_ONE_DMA_AT_ONCE BIT_14 - - T3_32BIT_REGISTER PciState; -#define T3_PCI_STATE_FORCE_PCI_RESET BIT_0 -#define T3_PCI_STATE_INTERRUPT_NOT_ACTIVE BIT_1 -#define T3_PCI_STATE_NOT_PCI_X_BUS BIT_2 -#define T3_PCI_STATE_HIGH_BUS_SPEED BIT_3 -#define T3_PCI_STATE_32BIT_PCI_BUS BIT_4 -#define T3_PCI_STATE_PCI_ROM_ENABLE BIT_5 -#define T3_PCI_STATE_PCI_ROM_RETRY_ENABLE BIT_6 -#define T3_PCI_STATE_FLAT_VIEW BIT_8 -#define T3_PCI_STATE_RETRY_SAME_DMA BIT_13 - - T3_32BIT_REGISTER ClockCtrl; -#define T3_PCI_CLKCTRL_TXCPU_CLK_DISABLE BIT_11 -#define T3_PCI_CLKCTRL_RXCPU_CLK_DISABLE BIT_10 -#define T3_PCI_CLKCTRL_CORE_CLK_DISABLE BIT_9 - - T3_32BIT_REGISTER RegBaseAddr; - - T3_32BIT_REGISTER MemWindowBaseAddr; - -#ifdef NIC_CPU_VIEW - /* These registers are ONLY visible to NIC CPU */ - T3_32BIT_REGISTER PowerConsumed; - T3_32BIT_REGISTER PowerDissipated; -#else /* NIC_CPU_VIEW */ - T3_32BIT_REGISTER RegData; - T3_32BIT_REGISTER MemWindowData; -#endif /* !NIC_CPU_VIEW */ - - T3_32BIT_REGISTER ModeCtrl; - - T3_32BIT_REGISTER MiscCfg; - - T3_32BIT_REGISTER MiscLocalCtrl; - - T3_32BIT_REGISTER Unused4; - - /* NOTE: Big/Little-endian clarification needed. Are these register */ - /* in big or little endian formate. */ - T3_64BIT_REGISTER StdRingProdIdx; - T3_64BIT_REGISTER RcvRetRingConIdx; - T3_64BIT_REGISTER SndProdIdx; - - LM_UINT8 Unused5[80]; -} T3_PCI_CONFIGURATION, *PT3_PCI_CONFIGURATION; - -#define PCIX_CMD_MAX_SPLIT_MASK 0x0070 -#define PCIX_CMD_MAX_SPLIT_SHL 4 -#define PCIX_CMD_MAX_BURST_MASK 0x000c -#define PCIX_CMD_MAX_BURST_SHL 2 -#define PCIX_CMD_MAX_BURST_CPIOB 2 - -/******************************************************************************/ -/* Mac control registers. */ -/******************************************************************************/ - -typedef struct { - /* MAC mode control. */ - T3_32BIT_REGISTER Mode; -#define MAC_MODE_GLOBAL_RESET BIT_0 -#define MAC_MODE_HALF_DUPLEX BIT_1 -#define MAC_MODE_PORT_MODE_MASK (BIT_2 | BIT_3) -#define MAC_MODE_PORT_MODE_TBI (BIT_2 | BIT_3) -#define MAC_MODE_PORT_MODE_GMII BIT_3 -#define MAC_MODE_PORT_MODE_MII BIT_2 -#define MAC_MODE_PORT_MODE_NONE BIT_NONE -#define MAC_MODE_PORT_INTERNAL_LOOPBACK BIT_4 -#define MAC_MODE_TAGGED_MAC_CONTROL BIT_7 -#define MAC_MODE_TX_BURSTING BIT_8 -#define MAC_MODE_MAX_DEFER BIT_9 -#define MAC_MODE_LINK_POLARITY BIT_10 -#define MAC_MODE_ENABLE_RX_STATISTICS BIT_11 -#define MAC_MODE_CLEAR_RX_STATISTICS BIT_12 -#define MAC_MODE_FLUSH_RX_STATISTICS BIT_13 -#define MAC_MODE_ENABLE_TX_STATISTICS BIT_14 -#define MAC_MODE_CLEAR_TX_STATISTICS BIT_15 -#define MAC_MODE_FLUSH_TX_STATISTICS BIT_16 -#define MAC_MODE_SEND_CONFIGS BIT_17 -#define MAC_MODE_DETECT_MAGIC_PACKET_ENABLE BIT_18 -#define MAC_MODE_ACPI_POWER_ON_ENABLE BIT_19 -#define MAC_MODE_ENABLE_MIP BIT_20 -#define MAC_MODE_ENABLE_TDE BIT_21 -#define MAC_MODE_ENABLE_RDE BIT_22 -#define MAC_MODE_ENABLE_FHDE BIT_23 - - /* MAC status */ - T3_32BIT_REGISTER Status; -#define MAC_STATUS_PCS_SYNCED BIT_0 -#define MAC_STATUS_SIGNAL_DETECTED BIT_1 -#define MAC_STATUS_RECEIVING_CFG BIT_2 -#define MAC_STATUS_CFG_CHANGED BIT_3 -#define MAC_STATUS_SYNC_CHANGED BIT_4 -#define MAC_STATUS_PORT_DECODE_ERROR BIT_10 -#define MAC_STATUS_LINK_STATE_CHANGED BIT_12 -#define MAC_STATUS_MI_COMPLETION BIT_22 -#define MAC_STATUS_MI_INTERRUPT BIT_23 -#define MAC_STATUS_AP_ERROR BIT_24 -#define MAC_STATUS_ODI_ERROR BIT_25 -#define MAC_STATUS_RX_STATS_OVERRUN BIT_26 -#define MAC_STATUS_TX_STATS_OVERRUN BIT_27 - - /* Event Enable */ - T3_32BIT_REGISTER MacEvent; -#define MAC_EVENT_ENABLE_PORT_DECODE_ERR BIT_10 -#define MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN BIT_12 -#define MAC_EVENT_ENABLE_MI_COMPLETION BIT_22 -#define MAC_EVENT_ENABLE_MI_INTERRUPT BIT_23 -#define MAC_EVENT_ENABLE_AP_ERROR BIT_24 -#define MAC_EVENT_ENABLE_ODI_ERROR BIT_25 -#define MAC_EVENT_ENABLE_RX_STATS_OVERRUN BIT_26 -#define MAC_EVENT_ENABLE_TX_STATS_OVERRUN BIT_27 - - /* Led control. */ - T3_32BIT_REGISTER LedCtrl; -#define LED_CTRL_OVERRIDE_LINK_LED BIT_0 -#define LED_CTRL_1000MBPS_LED_ON BIT_1 -#define LED_CTRL_100MBPS_LED_ON BIT_2 -#define LED_CTRL_10MBPS_LED_ON BIT_3 -#define LED_CTRL_OVERRIDE_TRAFFIC_LED BIT_4 -#define LED_CTRL_BLINK_TRAFFIC_LED BIT_5 -#define LED_CTRL_TRAFFIC_LED BIT_6 -#define LED_CTRL_1000MBPS_LED_STATUS BIT_7 -#define LED_CTRL_100MBPS_LED_STATUS BIT_8 -#define LED_CTRL_10MBPS_LED_STATUS BIT_9 -#define LED_CTRL_TRAFFIC_LED_STATUS BIT_10 -#define LED_CTRL_MAC_MODE BIT_NONE -#define LED_CTRL_PHY_MODE_1 BIT_11 -#define LED_CTRL_PHY_MODE_2 BIT_12 -#define LED_CTRL_BLINK_RATE_MASK 0x7ff80000 -#define LED_CTRL_OVERRIDE_BLINK_PERIOD BIT_19 -#define LED_CTRL_OVERRIDE_BLINK_RATE BIT_31 - - /* MAC addresses. */ - struct { - T3_32BIT_REGISTER High; /* Upper 2 bytes. */ - T3_32BIT_REGISTER Low; /* Lower 4 bytes. */ - } MacAddr[4]; - - /* ACPI Mbuf pointer. */ - T3_32BIT_REGISTER AcpiMbufPtr; - - /* ACPI Length and Offset. */ - T3_32BIT_REGISTER AcpiLengthOffset; -#define ACPI_LENGTH_MASK 0xffff -#define ACPI_OFFSET_MASK 0x0fff0000 -#define ACPI_LENGTH(x) x -#define ACPI_OFFSET(x) ((x) << 16) - - /* Transmit random backoff. */ - T3_32BIT_REGISTER TxBackoffSeed; -#define MAC_TX_BACKOFF_SEED_MASK 0x3ff - - /* Receive MTU */ - T3_32BIT_REGISTER MtuSize; -#define MAC_RX_MTU_MASK 0xffff - - /* Gigabit PCS Test. */ - T3_32BIT_REGISTER PcsTest; -#define MAC_PCS_TEST_DATA_PATTERN_MASK 0x0fffff -#define MAC_PCS_TEST_ENABLE BIT_20 - - /* Transmit Gigabit Auto-Negotiation. */ - T3_32BIT_REGISTER TxAutoNeg; -#define MAC_AN_TX_AN_DATA_MASK 0xffff - - /* Receive Gigabit Auto-Negotiation. */ - T3_32BIT_REGISTER RxAutoNeg; -#define MAC_AN_RX_AN_DATA_MASK 0xffff - - /* MI Communication. */ - T3_32BIT_REGISTER MiCom; -#define MI_COM_CMD_MASK (BIT_26 | BIT_27) -#define MI_COM_CMD_WRITE BIT_26 -#define MI_COM_CMD_READ BIT_27 -#define MI_COM_READ_FAILED BIT_28 -#define MI_COM_START BIT_29 -#define MI_COM_BUSY BIT_29 - -#define MI_COM_PHY_ADDR_MASK 0x1f -#define MI_COM_FIRST_PHY_ADDR_BIT 21 - -#define MI_COM_PHY_REG_ADDR_MASK 0x1f -#define MI_COM_FIRST_PHY_REG_ADDR_BIT 16 - -#define MI_COM_PHY_DATA_MASK 0xffff - - /* MI Status. */ - T3_32BIT_REGISTER MiStatus; -#define MI_STATUS_ENABLE_LINK_STATUS_ATTN BIT_0 - - /* MI Mode. */ - T3_32BIT_REGISTER MiMode; -#define MI_MODE_CLOCK_SPEED_10MHZ BIT_0 -#define MI_MODE_USE_SHORT_PREAMBLE BIT_1 -#define MI_MODE_AUTO_POLLING_ENABLE BIT_4 -#define MI_MODE_CORE_CLOCK_SPEED_62MHZ BIT_15 - - /* Auto-polling status. */ - T3_32BIT_REGISTER AutoPollStatus; -#define AUTO_POLL_ERROR BIT_0 - - /* Transmit MAC mode. */ - T3_32BIT_REGISTER TxMode; -#define TX_MODE_RESET BIT_0 -#define TX_MODE_ENABLE BIT_1 -#define TX_MODE_ENABLE_FLOW_CONTROL BIT_4 -#define TX_MODE_ENABLE_BIG_BACKOFF BIT_5 -#define TX_MODE_ENABLE_LONG_PAUSE BIT_6 - - /* Transmit MAC status. */ - T3_32BIT_REGISTER TxStatus; -#define TX_STATUS_RX_CURRENTLY_XOFFED BIT_0 -#define TX_STATUS_SENT_XOFF BIT_1 -#define TX_STATUS_SENT_XON BIT_2 -#define TX_STATUS_LINK_UP BIT_3 -#define TX_STATUS_ODI_UNDERRUN BIT_4 -#define TX_STATUS_ODI_OVERRUN BIT_5 - - /* Transmit MAC length. */ - T3_32BIT_REGISTER TxLengths; -#define TX_LEN_SLOT_TIME_MASK 0xff -#define TX_LEN_IPG_MASK 0x0f00 -#define TX_LEN_IPG_CRS_MASK (BIT_12 | BIT_13) - - /* Receive MAC mode. */ - T3_32BIT_REGISTER RxMode; -#define RX_MODE_RESET BIT_0 -#define RX_MODE_ENABLE BIT_1 -#define RX_MODE_ENABLE_FLOW_CONTROL BIT_2 -#define RX_MODE_KEEP_MAC_CONTROL BIT_3 -#define RX_MODE_KEEP_PAUSE BIT_4 -#define RX_MODE_ACCEPT_OVERSIZED BIT_5 -#define RX_MODE_ACCEPT_RUNTS BIT_6 -#define RX_MODE_LENGTH_CHECK BIT_7 -#define RX_MODE_PROMISCUOUS_MODE BIT_8 -#define RX_MODE_NO_CRC_CHECK BIT_9 -#define RX_MODE_KEEP_VLAN_TAG BIT_10 - - /* Receive MAC status. */ - T3_32BIT_REGISTER RxStatus; -#define RX_STATUS_REMOTE_TRANSMITTER_XOFFED BIT_0 -#define RX_STATUS_XOFF_RECEIVED BIT_1 -#define RX_STATUS_XON_RECEIVED BIT_2 - - /* Hash registers. */ - T3_32BIT_REGISTER HashReg[4]; - - /* Receive placement rules registers. */ - struct { - T3_32BIT_REGISTER Rule; - T3_32BIT_REGISTER Value; - } RcvRules[16]; - -#define RCV_DISABLE_RULE_MASK 0x7fffffff - -#define RCV_RULE1_REJECT_BROADCAST_IDX 0x00 -#define REJECT_BROADCAST_RULE1_RULE 0xc2000000 -#define REJECT_BROADCAST_RULE1_VALUE 0xffffffff - -#define RCV_RULE2_REJECT_BROADCAST_IDX 0x01 -#define REJECT_BROADCAST_RULE2_RULE 0x86000004 -#define REJECT_BROADCAST_RULE2_VALUE 0xffffffff - -#if INCLUDE_5701_AX_FIX -#define RCV_LAST_RULE_IDX 0x04 -#else -#define RCV_LAST_RULE_IDX 0x02 -#endif - - T3_32BIT_REGISTER RcvRuleCfg; -#define RX_RULE_DEFAULT_CLASS (1 << 3) - - LM_UINT8 Reserved1[140]; - - T3_32BIT_REGISTER SerdesCfg; - T3_32BIT_REGISTER SerdesStatus; - - LM_UINT8 Reserved2[104]; - - volatile LM_UINT8 TxMacState[16]; - volatile LM_UINT8 RxMacState[20]; - - LM_UINT8 Reserved3[476]; - - T3_32BIT_REGISTER RxStats[26]; - - LM_UINT8 Reserved4[24]; - - T3_32BIT_REGISTER TxStats[28]; - - LM_UINT8 Reserved5[784]; -} T3_MAC_CONTROL, *PT3_MAC_CONTROL; - -/******************************************************************************/ -/* Send data initiator control registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define T3_SND_DATA_IN_MODE_RESET BIT_0 -#define T3_SND_DATA_IN_MODE_ENABLE BIT_1 -#define T3_SND_DATA_IN_MODE_STATS_OFLW_ATTN_ENABLE BIT_2 - - T3_32BIT_REGISTER Status; -#define T3_SND_DATA_IN_STATUS_STATS_OFLW_ATTN BIT_2 - - T3_32BIT_REGISTER StatsCtrl; -#define T3_SND_DATA_IN_STATS_CTRL_ENABLE BIT_0 -#define T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE BIT_1 -#define T3_SND_DATA_IN_STATS_CTRL_CLEAR BIT_2 -#define T3_SND_DATA_IN_STATS_CTRL_FLUSH BIT_3 -#define T3_SND_DATA_IN_STATS_CTRL_FORCE_ZERO BIT_4 - - T3_32BIT_REGISTER StatsEnableMask; - T3_32BIT_REGISTER StatsIncMask; - - LM_UINT8 Reserved[108]; - - T3_32BIT_REGISTER ClassOfServCnt[16]; - T3_32BIT_REGISTER DmaReadQFullCnt; - T3_32BIT_REGISTER DmaPriorityReadQFullCnt; - T3_32BIT_REGISTER SdcQFullCnt; - - T3_32BIT_REGISTER NicRingSetSendProdIdxCnt; - T3_32BIT_REGISTER StatusUpdatedCnt; - T3_32BIT_REGISTER InterruptsCnt; - T3_32BIT_REGISTER AvoidInterruptsCnt; - T3_32BIT_REGISTER SendThresholdHitCnt; - - /* Unused space. */ - LM_UINT8 Unused[800]; -} T3_SEND_DATA_INITIATOR, *PT3_SEND_DATA_INITIATOR; - -/******************************************************************************/ -/* Send data completion control registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define SND_DATA_COMP_MODE_RESET BIT_0 -#define SND_DATA_COMP_MODE_ENABLE BIT_1 - - /* Unused space. */ - LM_UINT8 Unused[1020]; -} T3_SEND_DATA_COMPLETION, *PT3_SEND_DATA_COMPLETION; - -/******************************************************************************/ -/* Send BD Ring Selector Control Registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define SND_BD_SEL_MODE_RESET BIT_0 -#define SND_BD_SEL_MODE_ENABLE BIT_1 -#define SND_BD_SEL_MODE_ATTN_ENABLE BIT_2 - - T3_32BIT_REGISTER Status; -#define SND_BD_SEL_STATUS_ERROR_ATTN BIT_2 - - T3_32BIT_REGISTER HwDiag; - - /* Unused space. */ - LM_UINT8 Unused1[52]; - - /* Send BD Ring Selector Local NIC Send BD Consumer Index. */ - T3_32BIT_REGISTER NicSendBdSelConIdx[16]; - - /* Unused space. */ - LM_UINT8 Unused2[896]; -} T3_SEND_BD_SELECTOR, *PT3_SEND_BD_SELECTOR; - -/******************************************************************************/ -/* Send BD initiator control registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define SND_BD_IN_MODE_RESET BIT_0 -#define SND_BD_IN_MODE_ENABLE BIT_1 -#define SND_BD_IN_MODE_ATTN_ENABLE BIT_2 - - T3_32BIT_REGISTER Status; -#define SND_BD_IN_STATUS_ERROR_ATTN BIT_2 - - /* Send BD initiator local NIC send BD producer index. */ - T3_32BIT_REGISTER NicSendBdInProdIdx[16]; - - /* Unused space. */ - LM_UINT8 Unused2[952]; -} T3_SEND_BD_INITIATOR, *PT3_SEND_BD_INITIATOR; - -/******************************************************************************/ -/* Send BD Completion Control. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define SND_BD_COMP_MODE_RESET BIT_0 -#define SND_BD_COMP_MODE_ENABLE BIT_1 -#define SND_BD_COMP_MODE_ATTN_ENABLE BIT_2 - - /* Unused space. */ - LM_UINT8 Unused2[1020]; -} T3_SEND_BD_COMPLETION, *PT3_SEND_BD_COMPLETION; - -/******************************************************************************/ -/* Receive list placement control registers. */ -/******************************************************************************/ - -typedef struct { - /* Mode. */ - T3_32BIT_REGISTER Mode; -#define RCV_LIST_PLMT_MODE_RESET BIT_0 -#define RCV_LIST_PLMT_MODE_ENABLE BIT_1 -#define RCV_LIST_PLMT_MODE_CLASS0_ATTN_ENABLE BIT_2 -#define RCV_LIST_PLMT_MODE_MAPPING_OOR_ATTN_ENABLE BIT_3 -#define RCV_LIST_PLMT_MODE_STATS_OFLOW_ATTN_ENABLE BIT_4 - - /* Status. */ - T3_32BIT_REGISTER Status; -#define RCV_LIST_PLMT_STATUS_CLASS0_ATTN BIT_2 -#define RCV_LIST_PLMT_STATUS_MAPPING_ATTN BIT_3 -#define RCV_LIST_PLMT_STATUS_STATS_OFLOW_ATTN BIT_4 - - /* Receive selector list lock register. */ - T3_32BIT_REGISTER Lock; -#define RCV_LIST_SEL_LOCK_REQUEST_MASK 0xffff -#define RCV_LIST_SEL_LOCK_GRANT_MASK 0xffff0000 - - /* Selector non-empty bits. */ - T3_32BIT_REGISTER NonEmptyBits; -#define RCV_LIST_SEL_NON_EMPTY_MASK 0xffff - - /* Receive list placement configuration register. */ - T3_32BIT_REGISTER Config; - - /* Receive List Placement statistics Control. */ - T3_32BIT_REGISTER StatsCtrl; -#define RCV_LIST_STATS_ENABLE BIT_0 -#define RCV_LIST_STATS_FAST_UPDATE BIT_1 - - /* Receive List Placement statistics Enable Mask. */ - T3_32BIT_REGISTER StatsEnableMask; - - /* Receive List Placement statistics Increment Mask. */ - T3_32BIT_REGISTER StatsIncMask; - - /* Unused space. */ - LM_UINT8 Unused1[224]; - - struct { - T3_32BIT_REGISTER Head; - T3_32BIT_REGISTER Tail; - T3_32BIT_REGISTER Count; - - /* Unused space. */ - LM_UINT8 Unused[4]; - } RcvSelectorList[16]; - - /* Local statistics counter. */ - T3_32BIT_REGISTER ClassOfServCnt[16]; - - T3_32BIT_REGISTER DropDueToFilterCnt; - T3_32BIT_REGISTER DmaWriteQFullCnt; - T3_32BIT_REGISTER DmaHighPriorityWriteQFullCnt; - T3_32BIT_REGISTER NoMoreReceiveBdCnt; - T3_32BIT_REGISTER IfInDiscardsCnt; - T3_32BIT_REGISTER IfInErrorsCnt; - T3_32BIT_REGISTER RcvThresholdHitCnt; - - /* Another unused space. */ - LM_UINT8 Unused2[420]; -} T3_RCV_LIST_PLACEMENT, *PT3_RCV_LIST_PLACEMENT; - -/******************************************************************************/ -/* Receive Data and Receive BD Initiator Control. */ -/******************************************************************************/ - -typedef struct { - /* Mode. */ - T3_32BIT_REGISTER Mode; -#define RCV_DATA_BD_IN_MODE_RESET BIT_0 -#define RCV_DATA_BD_IN_MODE_ENABLE BIT_1 -#define RCV_DATA_BD_IN_MODE_JUMBO_BD_NEEDED BIT_2 -#define RCV_DATA_BD_IN_MODE_FRAME_TOO_BIG BIT_3 -#define RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE BIT_4 - - /* Status. */ - T3_32BIT_REGISTER Status; -#define RCV_DATA_BD_IN_STATUS_JUMBO_BD_NEEDED BIT_2 -#define RCV_DATA_BD_IN_STATUS_FRAME_TOO_BIG BIT_3 -#define RCV_DATA_BD_IN_STATUS_INVALID_RING_SIZE BIT_4 - - /* Split frame minium size. */ - T3_32BIT_REGISTER SplitFrameMinSize; - - /* Unused space. */ - LM_UINT8 Unused1[0x2440 - 0x240c]; - - /* Receive RCBs. */ - T3_RCB JumboRcvRcb; - T3_RCB StdRcvRcb; - T3_RCB MiniRcvRcb; - - /* Receive Data and Receive BD Ring Initiator Local NIC Receive */ - /* BD Consumber Index. */ - T3_32BIT_REGISTER NicJumboConIdx; - T3_32BIT_REGISTER NicStdConIdx; - T3_32BIT_REGISTER NicMiniConIdx; - - /* Unused space. */ - LM_UINT8 Unused2[4]; - - /* Receive Data and Receive BD Initiator Local Receive Return ProdIdx. */ - T3_32BIT_REGISTER RcvDataBdProdIdx[16]; - - /* Receive Data and Receive BD Initiator Hardware Diagnostic. */ - T3_32BIT_REGISTER HwDiag; - - /* Unused space. */ - LM_UINT8 Unused3[828]; -} T3_RCV_DATA_BD_INITIATOR, *PT3_RCV_DATA_BD_INITIATOR; - -/******************************************************************************/ -/* Receive Data Completion Control Registes. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define RCV_DATA_COMP_MODE_RESET BIT_0 -#define RCV_DATA_COMP_MODE_ENABLE BIT_1 -#define RCV_DATA_COMP_MODE_ATTN_ENABLE BIT_2 - - /* Unused spaced. */ - LM_UINT8 Unused[1020]; -} T3_RCV_DATA_COMPLETION, *PT3_RCV_DATA_COMPLETION; - -/******************************************************************************/ -/* Receive BD Initiator Control. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define RCV_BD_IN_MODE_RESET BIT_0 -#define RCV_BD_IN_MODE_ENABLE BIT_1 -#define RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE BIT_2 - - T3_32BIT_REGISTER Status; -#define RCV_BD_IN_STATUS_BD_IN_DIABLED_RCB_ATTN BIT_2 - - T3_32BIT_REGISTER NicJumboRcvProdIdx; - T3_32BIT_REGISTER NicStdRcvProdIdx; - T3_32BIT_REGISTER NicMiniRcvProdIdx; - - T3_32BIT_REGISTER MiniRcvThreshold; - T3_32BIT_REGISTER StdRcvThreshold; - T3_32BIT_REGISTER JumboRcvThreshold; - - /* Unused space. */ - LM_UINT8 Unused[992]; -} T3_RCV_BD_INITIATOR, *PT3_RCV_BD_INITIATOR; - -/******************************************************************************/ -/* Receive BD Completion Control Registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define RCV_BD_COMP_MODE_RESET BIT_0 -#define RCV_BD_COMP_MODE_ENABLE BIT_1 -#define RCV_BD_COMP_MODE_ATTN_ENABLE BIT_2 - - T3_32BIT_REGISTER Status; -#define RCV_BD_COMP_STATUS_ERROR_ATTN BIT_2 - - T3_32BIT_REGISTER NicJumboRcvBdProdIdx; - T3_32BIT_REGISTER NicStdRcvBdProdIdx; - T3_32BIT_REGISTER NicMiniRcvBdProdIdx; - - /* Unused space. */ - LM_UINT8 Unused[1004]; -} T3_RCV_BD_COMPLETION, *PT3_RCV_BD_COMPLETION; - -/******************************************************************************/ -/* Receive list selector control register. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define RCV_LIST_SEL_MODE_RESET BIT_0 -#define RCV_LIST_SEL_MODE_ENABLE BIT_1 -#define RCV_LIST_SEL_MODE_ATTN_ENABLE BIT_2 - - T3_32BIT_REGISTER Status; -#define RCV_LIST_SEL_STATUS_ERROR_ATTN BIT_2 - - /* Unused space. */ - LM_UINT8 Unused[1016]; -} T3_RCV_LIST_SELECTOR, *PT3_RCV_LIST_SELECTOR; - -/******************************************************************************/ -/* Mbuf cluster free registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define MBUF_CLUSTER_FREE_MODE_RESET BIT_0 -#define MBUF_CLUSTER_FREE_MODE_ENABLE BIT_1 - - T3_32BIT_REGISTER Status; - - /* Unused space. */ - LM_UINT8 Unused[1016]; -} T3_MBUF_CLUSTER_FREE, *PT3_MBUF_CLUSTER_FREE; - -/******************************************************************************/ -/* Host coalescing control registers. */ -/******************************************************************************/ - -typedef struct { - /* Mode. */ - T3_32BIT_REGISTER Mode; -#define HOST_COALESCE_RESET BIT_0 -#define HOST_COALESCE_ENABLE BIT_1 -#define HOST_COALESCE_ATTN BIT_2 -#define HOST_COALESCE_NOW BIT_3 -#define HOST_COALESCE_FULL_STATUS_MODE BIT_NONE -#define HOST_COALESCE_64_BYTE_STATUS_MODE BIT_7 -#define HOST_COALESCE_32_BYTE_STATUS_MODE BIT_8 -#define HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT BIT_9 -#define HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT BIT_10 -#define HOST_COALESCE_NO_INT_ON_COALESCE_NOW_MODE BIT_11 -#define HOST_COALESCE_NO_INT_ON_FORCE_DMAD_MODE BIT_12 - - /* Status. */ - T3_32BIT_REGISTER Status; -#define HOST_COALESCE_ERROR_ATTN BIT_2 - - /* Receive coalescing ticks. */ - T3_32BIT_REGISTER RxCoalescingTicks; - - /* Send coalescing ticks. */ - T3_32BIT_REGISTER TxCoalescingTicks; - - /* Receive max coalesced frames. */ - T3_32BIT_REGISTER RxMaxCoalescedFrames; - - /* Send max coalesced frames. */ - T3_32BIT_REGISTER TxMaxCoalescedFrames; - - /* Receive coalescing ticks during interrupt. */ - T3_32BIT_REGISTER RxCoalescedTickDuringInt; - - /* Send coalescing ticks during interrupt. */ - T3_32BIT_REGISTER TxCoalescedTickDuringInt; - - /* Receive max coalesced frames during interrupt. */ - T3_32BIT_REGISTER RxMaxCoalescedFramesDuringInt; - - /* Send max coalesced frames during interrupt. */ - T3_32BIT_REGISTER TxMaxCoalescedFramesDuringInt; - - /* Statistics tick. */ - T3_32BIT_REGISTER StatsCoalescingTicks; - - /* Unused space. */ - LM_UINT8 Unused2[4]; - - /* Statistics host address. */ - T3_64BIT_REGISTER StatsBlkHostAddr; - - /* Status block host address. */ - T3_64BIT_REGISTER StatusBlkHostAddr; - - /* Statistics NIC address. */ - T3_32BIT_REGISTER StatsBlkNicAddr; - - /* Statust block NIC address. */ - T3_32BIT_REGISTER StatusBlkNicAddr; - - /* Flow attention registers. */ - T3_32BIT_REGISTER FlowAttn; - - /* Unused space. */ - LM_UINT8 Unused3[4]; - - T3_32BIT_REGISTER NicJumboRcvBdConIdx; - T3_32BIT_REGISTER NicStdRcvBdConIdx; - T3_32BIT_REGISTER NicMiniRcvBdConIdx; - - /* Unused space. */ - LM_UINT8 Unused4[36]; - - T3_32BIT_REGISTER NicRetProdIdx[16]; - T3_32BIT_REGISTER NicSndBdConIdx[16]; - - /* Unused space. */ - LM_UINT8 Unused5[768]; -} T3_HOST_COALESCING, *PT3_HOST_COALESCING; - -/******************************************************************************/ -/* Memory arbiter registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define T3_MEM_ARBITER_MODE_RESET BIT_0 -#define T3_MEM_ARBITER_MODE_ENABLE BIT_1 - - T3_32BIT_REGISTER Status; - - T3_32BIT_REGISTER ArbTrapAddrLow; - T3_32BIT_REGISTER ArbTrapAddrHigh; - - /* Unused space. */ - LM_UINT8 Unused[1008]; -} T3_MEM_ARBITER, *PT3_MEM_ARBITER; - -/******************************************************************************/ -/* Buffer manager control register. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define BUFMGR_MODE_RESET BIT_0 -#define BUFMGR_MODE_ENABLE BIT_1 -#define BUFMGR_MODE_ATTN_ENABLE BIT_2 -#define BUFMGR_MODE_BM_TEST BIT_3 -#define BUFMGR_MODE_MBUF_LOW_ATTN_ENABLE BIT_4 - - T3_32BIT_REGISTER Status; -#define BUFMGR_STATUS_ERROR BIT_2 -#define BUFMGR_STATUS_MBUF_LOW BIT_4 - - T3_32BIT_REGISTER MbufPoolAddr; - T3_32BIT_REGISTER MbufPoolSize; - T3_32BIT_REGISTER MbufReadDmaLowWaterMark; - T3_32BIT_REGISTER MbufMacRxLowWaterMark; - T3_32BIT_REGISTER MbufHighWaterMark; - - T3_32BIT_REGISTER RxCpuMbufAllocReq; -#define BUFMGR_MBUF_ALLOC_BIT BIT_31 - T3_32BIT_REGISTER RxCpuMbufAllocResp; - T3_32BIT_REGISTER TxCpuMbufAllocReq; - T3_32BIT_REGISTER TxCpuMbufAllocResp; - - T3_32BIT_REGISTER DmaDescPoolAddr; - T3_32BIT_REGISTER DmaDescPoolSize; - T3_32BIT_REGISTER DmaLowWaterMark; - T3_32BIT_REGISTER DmaHighWaterMark; - - T3_32BIT_REGISTER RxCpuDmaAllocReq; - T3_32BIT_REGISTER RxCpuDmaAllocResp; - T3_32BIT_REGISTER TxCpuDmaAllocReq; - T3_32BIT_REGISTER TxCpuDmaAllocResp; - - T3_32BIT_REGISTER Hwdiag[3]; - - /* Unused space. */ - LM_UINT8 Unused[936]; -} T3_BUFFER_MANAGER, *PT3_BUFFER_MANAGER; - -/******************************************************************************/ -/* Read DMA control registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define DMA_READ_MODE_RESET BIT_0 -#define DMA_READ_MODE_ENABLE BIT_1 -#define DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE BIT_2 -#define DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE BIT_3 -#define DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE BIT_4 -#define DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE BIT_5 -#define DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE BIT_6 -#define DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE BIT_7 -#define DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE BIT_8 -#define DMA_READ_MODE_LONG_READ_ATTN_ENABLE BIT_9 -#define DMA_READ_MODE_SPLIT_ENABLE BIT_11 -#define DMA_READ_MODE_SPLIT_RESET BIT_12 - - T3_32BIT_REGISTER Status; -#define DMA_READ_STATUS_TARGET_ABORT_ATTN BIT_2 -#define DMA_READ_STATUS_MASTER_ABORT_ATTN BIT_3 -#define DMA_READ_STATUS_PARITY_ERROR_ATTN BIT_4 -#define DMA_READ_STATUS_ADDR_OVERFLOW_ATTN BIT_5 -#define DMA_READ_STATUS_FIFO_OVERRUN_ATTN BIT_6 -#define DMA_READ_STATUS_FIFO_UNDERRUN_ATTN BIT_7 -#define DMA_READ_STATUS_FIFO_OVERREAD_ATTN BIT_8 -#define DMA_READ_STATUS_LONG_READ_ATTN BIT_9 - - /* Unused space. */ - LM_UINT8 Unused[1016]; -} T3_DMA_READ, *PT3_DMA_READ; - -typedef union T3_CPU { - struct { - T3_32BIT_REGISTER mode; -#define CPU_MODE_HALT BIT_10 -#define CPU_MODE_RESET BIT_0 - T3_32BIT_REGISTER state; - T3_32BIT_REGISTER EventMask; - T3_32BIT_REGISTER reserved1[4]; - T3_32BIT_REGISTER PC; - T3_32BIT_REGISTER Instruction; - T3_32BIT_REGISTER SpadUnderflow; - T3_32BIT_REGISTER WatchdogClear; - T3_32BIT_REGISTER WatchdogVector; - T3_32BIT_REGISTER WatchdogSavedPC; - T3_32BIT_REGISTER HardwareBp; - T3_32BIT_REGISTER reserved2[3]; - T3_32BIT_REGISTER WatchdogSavedState; - T3_32BIT_REGISTER LastBrchAddr; - T3_32BIT_REGISTER SpadUnderflowSet; - T3_32BIT_REGISTER reserved3[(0x200 - 0x50) / 4]; - T3_32BIT_REGISTER Regs[32]; - T3_32BIT_REGISTER reserved4[(0x400 - 0x280) / 4]; - } reg; -} T3_CPU, *PT3_CPU; - -/******************************************************************************/ -/* Write DMA control registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define DMA_WRITE_MODE_RESET BIT_0 -#define DMA_WRITE_MODE_ENABLE BIT_1 -#define DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE BIT_2 -#define DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE BIT_3 -#define DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE BIT_4 -#define DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE BIT_5 -#define DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE BIT_6 -#define DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE BIT_7 -#define DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE BIT_8 -#define DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE BIT_9 - - T3_32BIT_REGISTER Status; -#define DMA_WRITE_STATUS_TARGET_ABORT_ATTN BIT_2 -#define DMA_WRITE_STATUS_MASTER_ABORT_ATTN BIT_3 -#define DMA_WRITE_STATUS_PARITY_ERROR_ATTN BIT_4 -#define DMA_WRITE_STATUS_ADDR_OVERFLOW_ATTN BIT_5 -#define DMA_WRITE_STATUS_FIFO_OVERRUN_ATTN BIT_6 -#define DMA_WRITE_STATUS_FIFO_UNDERRUN_ATTN BIT_7 -#define DMA_WRITE_STATUS_FIFO_OVERREAD_ATTN BIT_8 -#define DMA_WRITE_STATUS_LONG_READ_ATTN BIT_9 - - /* Unused space. */ - LM_UINT8 Unused[1016]; -} T3_DMA_WRITE, *PT3_DMA_WRITE; - -/******************************************************************************/ -/* Mailbox registers. */ -/******************************************************************************/ - -typedef struct { - /* Interrupt mailbox registers. */ - T3_64BIT_REGISTER Interrupt[4]; - - /* General mailbox registers. */ - T3_64BIT_REGISTER General[8]; - - /* Reload statistics mailbox. */ - T3_64BIT_REGISTER ReloadStat; - - /* Receive BD ring producer index registers. */ - T3_64BIT_REGISTER RcvStdProdIdx; - T3_64BIT_REGISTER RcvJumboProdIdx; - T3_64BIT_REGISTER RcvMiniProdIdx; - - /* Receive return ring consumer index registers. */ - T3_64BIT_REGISTER RcvRetConIdx[16]; - - /* Send BD ring host producer index registers. */ - T3_64BIT_REGISTER SendHostProdIdx[16]; - - /* Send BD ring nic producer index registers. */ - T3_64BIT_REGISTER SendNicProdIdx[16]; -} T3_MAILBOX, *PT3_MAILBOX; - -typedef struct { - T3_MAILBOX Mailbox; - - /* Priority mailbox registers. */ - T3_32BIT_REGISTER HighPriorityEventVector; - T3_32BIT_REGISTER HighPriorityEventMask; - T3_32BIT_REGISTER LowPriorityEventVector; - T3_32BIT_REGISTER LowPriorityEventMask; - - /* Unused space. */ - LM_UINT8 Unused[496]; -} T3_GRC_MAILBOX, *PT3_GRC_MAILBOX; - -/******************************************************************************/ -/* Flow through queues. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Reset; - - LM_UINT8 Unused[12]; - - T3_32BIT_REGISTER DmaNormalReadFtqCtrl; - T3_32BIT_REGISTER DmaNormalReadFtqFullCnt; - T3_32BIT_REGISTER DmaNormalReadFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER DmaNormalReadFtqFifoWritePeek; - - T3_32BIT_REGISTER DmaHighReadFtqCtrl; - T3_32BIT_REGISTER DmaHighReadFtqFullCnt; - T3_32BIT_REGISTER DmaHighReadFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER DmaHighReadFtqFifoWritePeek; - - T3_32BIT_REGISTER DmaCompDiscardFtqCtrl; - T3_32BIT_REGISTER DmaCompDiscardFtqFullCnt; - T3_32BIT_REGISTER DmaCompDiscardFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER DmaCompDiscardFtqFifoWritePeek; - - T3_32BIT_REGISTER SendBdCompFtqCtrl; - T3_32BIT_REGISTER SendBdCompFtqFullCnt; - T3_32BIT_REGISTER SendBdCompFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER SendBdCompFtqFifoWritePeek; - - T3_32BIT_REGISTER SendDataInitiatorFtqCtrl; - T3_32BIT_REGISTER SendDataInitiatorFtqFullCnt; - T3_32BIT_REGISTER SendDataInitiatorFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER SendDataInitiatorFtqFifoWritePeek; - - T3_32BIT_REGISTER DmaNormalWriteFtqCtrl; - T3_32BIT_REGISTER DmaNormalWriteFtqFullCnt; - T3_32BIT_REGISTER DmaNormalWriteFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER DmaNormalWriteFtqFifoWritePeek; - - T3_32BIT_REGISTER DmaHighWriteFtqCtrl; - T3_32BIT_REGISTER DmaHighWriteFtqFullCnt; - T3_32BIT_REGISTER DmaHighWriteFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER DmaHighWriteFtqFifoWritePeek; - - T3_32BIT_REGISTER SwType1FtqCtrl; - T3_32BIT_REGISTER SwType1FtqFullCnt; - T3_32BIT_REGISTER SwType1FtqFifoEnqueueDequeue; - T3_32BIT_REGISTER SwType1FtqFifoWritePeek; - - T3_32BIT_REGISTER SendDataCompFtqCtrl; - T3_32BIT_REGISTER SendDataCompFtqFullCnt; - T3_32BIT_REGISTER SendDataCompFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER SendDataCompFtqFifoWritePeek; - - T3_32BIT_REGISTER HostCoalesceFtqCtrl; - T3_32BIT_REGISTER HostCoalesceFtqFullCnt; - T3_32BIT_REGISTER HostCoalesceFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER HostCoalesceFtqFifoWritePeek; - - T3_32BIT_REGISTER MacTxFtqCtrl; - T3_32BIT_REGISTER MacTxFtqFullCnt; - T3_32BIT_REGISTER MacTxFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER MacTxFtqFifoWritePeek; - - T3_32BIT_REGISTER MbufClustFreeFtqCtrl; - T3_32BIT_REGISTER MbufClustFreeFtqFullCnt; - T3_32BIT_REGISTER MbufClustFreeFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER MbufClustFreeFtqFifoWritePeek; - - T3_32BIT_REGISTER RcvBdCompFtqCtrl; - T3_32BIT_REGISTER RcvBdCompFtqFullCnt; - T3_32BIT_REGISTER RcvBdCompFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER RcvBdCompFtqFifoWritePeek; - - T3_32BIT_REGISTER RcvListPlmtFtqCtrl; - T3_32BIT_REGISTER RcvListPlmtFtqFullCnt; - T3_32BIT_REGISTER RcvListPlmtFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER RcvListPlmtFtqFifoWritePeek; - - T3_32BIT_REGISTER RcvDataBdInitiatorFtqCtrl; - T3_32BIT_REGISTER RcvDataBdInitiatorFtqFullCnt; - T3_32BIT_REGISTER RcvDataBdInitiatorFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER RcvDataBdInitiatorFtqFifoWritePeek; - - T3_32BIT_REGISTER RcvDataCompFtqCtrl; - T3_32BIT_REGISTER RcvDataCompFtqFullCnt; - T3_32BIT_REGISTER RcvDataCompFtqFifoEnqueueDequeue; - T3_32BIT_REGISTER RcvDataCompFtqFifoWritePeek; - - T3_32BIT_REGISTER SwType2FtqCtrl; - T3_32BIT_REGISTER SwType2FtqFullCnt; - T3_32BIT_REGISTER SwType2FtqFifoEnqueueDequeue; - T3_32BIT_REGISTER SwType2FtqFifoWritePeek; - - /* Unused space. */ - LM_UINT8 Unused2[736]; -} T3_FTQ, *PT3_FTQ; - -/******************************************************************************/ -/* Message signaled interrupt registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define MSI_MODE_RESET BIT_0 -#define MSI_MODE_ENABLE BIT_1 - T3_32BIT_REGISTER Status; - - T3_32BIT_REGISTER MsiFifoAccess; - - /* Unused space. */ - LM_UINT8 Unused[1012]; -} T3_MSG_SIGNALED_INT, *PT3_MSG_SIGNALED_INT; - -/******************************************************************************/ -/* DMA Completion registes. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Mode; -#define DMA_COMP_MODE_RESET BIT_0 -#define DMA_COMP_MODE_ENABLE BIT_1 - - /* Unused space. */ - LM_UINT8 Unused[1020]; -} T3_DMA_COMPLETION, *PT3_DMA_COMPLETION; - -/******************************************************************************/ -/* GRC registers. */ -/******************************************************************************/ - -typedef struct { - /* Mode control register. */ - T3_32BIT_REGISTER Mode; -#define GRC_MODE_UPDATE_ON_COALESCING BIT_0 -#define GRC_MODE_BYTE_SWAP_NON_FRAME_DATA BIT_1 -#define GRC_MODE_WORD_SWAP_NON_FRAME_DATA BIT_2 -#define GRC_MODE_BYTE_SWAP_DATA BIT_4 -#define GRC_MODE_WORD_SWAP_DATA BIT_5 -#define GRC_MODE_SPLIT_HEADER_MODE BIT_8 -#define GRC_MODE_NO_FRAME_CRACKING BIT_9 -#define GRC_MODE_INCLUDE_CRC BIT_10 -#define GRC_MODE_ALLOW_BAD_FRAMES BIT_11 -#define GRC_MODE_NO_INTERRUPT_ON_SENDS BIT_13 -#define GRC_MODE_NO_INTERRUPT_ON_RECEIVE BIT_14 -#define GRC_MODE_FORCE_32BIT_PCI_BUS_MODE BIT_15 -#define GRC_MODE_HOST_STACK_UP BIT_16 -#define GRC_MODE_HOST_SEND_BDS BIT_17 -#define GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM BIT_20 -#define GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM BIT_23 -#define GRC_MODE_INT_ON_TX_CPU_ATTN BIT_24 -#define GRC_MODE_INT_ON_RX_CPU_ATTN BIT_25 -#define GRC_MODE_INT_ON_MAC_ATTN BIT_26 -#define GRC_MODE_INT_ON_DMA_ATTN BIT_27 -#define GRC_MODE_INT_ON_FLOW_ATTN BIT_28 -#define GRC_MODE_4X_NIC_BASED_SEND_RINGS BIT_29 -#define GRC_MODE_MULTICAST_FRAME_ENABLE BIT_30 - - /* Misc configuration register. */ - T3_32BIT_REGISTER MiscCfg; -#define GRC_MISC_CFG_CORE_CLOCK_RESET BIT_0 -#define GRC_MISC_PRESCALAR_TIMER_MASK 0xfe -#define GRC_MISC_BD_ID_MASK 0x0001e000 -#define GRC_MISC_BD_ID_5700 0x0001e000 -#define GRC_MISC_BD_ID_5701 0x00000000 -#define GRC_MISC_BD_ID_5703 0x00000000 -#define GRC_MISC_BD_ID_5703S 0x00002000 -#define GRC_MISC_BD_ID_5702FE 0x00004000 -#define GRC_MISC_BD_ID_5704 0x00000000 -#define GRC_MISC_BD_ID_5704CIOBE 0x00004000 - - /* Miscellaneous local control register. */ - T3_32BIT_REGISTER LocalCtrl; -#define GRC_MISC_LOCAL_CTRL_INT_ACTIVE BIT_0 -#define GRC_MISC_LOCAL_CTRL_CLEAR_INT BIT_1 -#define GRC_MISC_LOCAL_CTRL_SET_INT BIT_2 -#define GRC_MISC_LOCAL_CTRL_INT_ON_ATTN BIT_3 -#define GRC_MISC_LOCAL_CTRL_GPIO_INPUT0 BIT_8 -#define GRC_MISC_LOCAL_CTRL_GPIO_INPUT1 BIT_9 -#define GRC_MISC_LOCAL_CTRL_GPIO_INPUT2 BIT_10 -#define GRC_MISC_LOCAL_CTRL_GPIO_OE0 BIT_11 -#define GRC_MISC_LOCAL_CTRL_GPIO_OE1 BIT_12 -#define GRC_MISC_LOCAL_CTRL_GPIO_OE2 BIT_13 -#define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 BIT_14 -#define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 BIT_15 -#define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2 BIT_16 -#define GRC_MISC_LOCAL_CTRL_ENABLE_EXT_MEMORY BIT_17 -#define GRC_MISC_LOCAL_CTRL_BANK_SELECT BIT_21 -#define GRC_MISC_LOCAL_CTRL_SSRAM_TYPE BIT_22 - -#define GRC_MISC_MEMSIZE_256K 0 -#define GRC_MISC_MEMSIZE_512K (1 << 18) -#define GRC_MISC_MEMSIZE_1024K (2 << 18) -#define GRC_MISC_MEMSIZE_2048K (3 << 18) -#define GRC_MISC_MEMSIZE_4096K (4 << 18) -#define GRC_MISC_MEMSIZE_8192K (5 << 18) -#define GRC_MISC_MEMSIZE_16M (6 << 18) -#define GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM BIT_24 - - T3_32BIT_REGISTER Timer; - - T3_32BIT_REGISTER RxCpuEvent; - T3_32BIT_REGISTER RxTimerRef; - T3_32BIT_REGISTER RxCpuSemaphore; - T3_32BIT_REGISTER RemoteRxCpuAttn; - - T3_32BIT_REGISTER TxCpuEvent; - T3_32BIT_REGISTER TxTimerRef; - T3_32BIT_REGISTER TxCpuSemaphore; - T3_32BIT_REGISTER RemoteTxCpuAttn; - - T3_64BIT_REGISTER MemoryPowerUp; - - T3_32BIT_REGISTER EepromAddr; -#define SEEPROM_ADDR_WRITE 0 -#define SEEPROM_ADDR_READ (1 << 31) -#define SEEPROM_ADDR_RW_MASK 0x80000000 -#define SEEPROM_ADDR_COMPLETE (1 << 30) -#define SEEPROM_ADDR_FSM_RESET (1 << 29) -#define SEEPROM_ADDR_DEV_ID(x) (x << 26) -#define SEEPROM_ADDR_DEV_ID_MASK 0x1c000000 -#define SEEPROM_ADDR_START (1 << 25) -#define SEEPROM_ADDR_CLK_PERD(x) (x << 16) -#define SEEPROM_ADDR_ADDRESS(x) (x & 0xfffc) -#define SEEPROM_ADDR_ADDRESS_MASK 0x0000ffff - -#define SEEPROM_CLOCK_PERIOD 60 -#define SEEPROM_CHIP_SIZE (64 * 1024) - - T3_32BIT_REGISTER EepromData; - T3_32BIT_REGISTER EepromCtrl; - - T3_32BIT_REGISTER MdiCtrl; - T3_32BIT_REGISTER SepromDelay; - - /* Unused space. */ - LM_UINT8 Unused[948]; -} T3_GRC, *PT3_GRC; - -/******************************************************************************/ -/* NVRAM control registers. */ -/******************************************************************************/ - -typedef struct { - T3_32BIT_REGISTER Cmd; -#define NVRAM_CMD_RESET BIT_0 -#define NVRAM_CMD_DONE BIT_3 -#define NVRAM_CMD_DO_IT BIT_4 -#define NVRAM_CMD_WR BIT_5 -#define NVRAM_CMD_RD BIT_NONE -#define NVRAM_CMD_ERASE BIT_6 -#define NVRAM_CMD_FIRST BIT_7 -#define NVRAM_CMD_LAST BIT_8 - - T3_32BIT_REGISTER Status; - T3_32BIT_REGISTER WriteData; - - T3_32BIT_REGISTER Addr; -#define NVRAM_ADDRESS_MASK 0xffffff - - T3_32BIT_REGISTER ReadData; - - /* Flash config 1 register. */ - T3_32BIT_REGISTER Config1; -#define FLASH_INTERFACE_ENABLE BIT_0 -#define FLASH_SSRAM_BUFFERRED_MODE BIT_1 -#define FLASH_PASS_THRU_MODE BIT_2 -#define FLASH_BIT_BANG_MODE BIT_3 -#define FLASH_COMPAT_BYPASS BIT_31 - - /* Buffered flash (Atmel: AT45DB011B) specific information */ -#define BUFFERED_FLASH_PAGE_POS 9 -#define BUFFERED_FLASH_BYTE_ADDR_MASK ((1<pMemView->OffsetName)) - -#define REG_WR(pDevice, OffsetName, Value32) \ - (((OFFSETOF(T3_STD_MEM_MAP, OffsetName) >=0x200 ) && \ - (OFFSETOF(T3_STD_MEM_MAP, OffsetName) <0x400)) || \ - ((pDevice)->EnablePciXFix == FALSE)) ? \ - (void) writel(Value32, &((pDevice)->pMemView->OffsetName)) : \ - LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName), Value32) - -#define MB_REG_RD(pDevice, OffsetName) \ - readl(&((pDevice)->pMemView->OffsetName)) - -#define MB_REG_WR(pDevice, OffsetName, Value32) \ - writel(Value32, &((pDevice)->pMemView->OffsetName)) - -#define REG_RD_OFFSET(pDevice, Offset) \ - readl(&((LM_UINT8 *) (pDevice)->pMemView + Offset)) - -#define REG_WR_OFFSET(pDevice, Offset, Value32) \ - (((Offset >=0x200 ) && (Offset < 0x400)) || \ - ((pDevice)->EnablePciXFix == FALSE)) ? \ - (void) writel(Value32, ((LM_UINT8 *) (pDevice)->pMemView + Offset)) : \ - LM_RegWrInd(pDevice, Offset, Value32) - -#define MEM_RD(pDevice, AddrName) \ - LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName)) -#define MEM_WR(pDevice, AddrName, Value32) \ - LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32) - -#define MEM_RD_OFFSET(pDevice, Offset) \ - LM_MemRdInd(pDevice, Offset) -#define MEM_WR_OFFSET(pDevice, Offset, Value32) \ - LM_MemWrInd(pDevice, Offset, Value32) - -#else /* normal target access path below */ - -/* Register access. */ -#define REG_RD(pDevice, OffsetName) \ - readl(&((pDevice)->pMemView->OffsetName)) -#define REG_WR(pDevice, OffsetName, Value32) \ - writel(Value32, &((pDevice)->pMemView->OffsetName)) - -#define REG_RD_OFFSET(pDevice, Offset) \ - readl(((LM_UINT8 *) (pDevice)->pMemView + Offset)) -#define REG_WR_OFFSET(pDevice, Offset, Value32) \ - writel(Value32, ((LM_UINT8 *) (pDevice)->pMemView + Offset)) - -/* There could be problem access the memory window directly. For now, */ -/* we have to go through the PCI configuration register. */ -#define MEM_RD(pDevice, AddrName) \ - LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName)) -#define MEM_WR(pDevice, AddrName, Value32) \ - LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32) - -#define MEM_RD_OFFSET(pDevice, Offset) \ - LM_MemRdInd(pDevice, Offset) -#define MEM_WR_OFFSET(pDevice, Offset, Value32) \ - LM_MemWrInd(pDevice, Offset, Value32) - -#endif /* PCIX_TARGET_WORKAROUND */ - -#endif /* Jimmy, merging */ - - /* Jimmy...rest of file is new stuff! */ -/******************************************************************************/ -/* NIC register read/write macros. */ -/******************************************************************************/ - -/* MAC register access. */ -LM_UINT32 LM_RegRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register); -LM_VOID LM_RegWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register, - LM_UINT32 Value32); - -/* MAC memory access. */ -LM_UINT32 LM_MemRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr); -LM_VOID LM_MemWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr, - LM_UINT32 Value32); - -#define MB_REG_WR(pDevice, OffsetName, Value32) \ - ((pDevice)->UndiFix) ? \ - LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)+0x5600, \ - Value32) : \ - (void) __raw_writel(Value32, &((pDevice)->pMemView->OffsetName)) - -#define MB_REG_RD(pDevice, OffsetName) \ - (((pDevice)->UndiFix) ? \ - LM_RegRdInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)+0x5600) : \ - __raw_readl(&((pDevice)->pMemView->OffsetName))) - -#define REG_RD(pDevice, OffsetName) \ - (((pDevice)->UndiFix) ? \ - LM_RegRdInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)) : \ - __raw_readl(&((pDevice)->pMemView->OffsetName))) - -#if PCIX_TARGET_WORKAROUND - -#define REG_WR(pDevice, OffsetName, Value32) \ - ((pDevice)->EnablePciXFix == FALSE) ? \ - (void) __raw_writel(Value32, &((pDevice)->pMemView->OffsetName)) : \ - LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName), Value32) - -#else - -#define REG_WR(pDevice, OffsetName, Value32) \ - __raw_writel(Value32, &((pDevice)->pMemView->OffsetName)) - -#endif - -#define MEM_RD(pDevice, AddrName) \ - LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName)) -#define MEM_WR(pDevice, AddrName, Value32) \ - LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32) - -#define MEM_RD_OFFSET(pDevice, Offset) \ - LM_MemRdInd(pDevice, Offset) -#define MEM_WR_OFFSET(pDevice, Offset, Value32) \ - LM_MemWrInd(pDevice, Offset, Value32) - -#endif /* TIGON3_H */ diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 8398b290bf..e1951ebb6e 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -49,9 +49,6 @@ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_BCM570x 1 /* Use Broadcom BCM570x Ethernet Driver */ -#define CONFIG_TIGON3 1 - #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } @@ -84,6 +81,8 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_ELF +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS #if 0