From: Dave Liu Date: Sat, 4 Aug 2007 05:37:39 +0000 (+0800) Subject: mpc83xx: Correct the burst length for DDR2 with 32 bits X-Git-Tag: v1.3.0-rc1~19^2~20^2~9^2~3 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=036575c544cf1b69654d8fb334bda69c6ff3da36;p=u-boot mpc83xx: Correct the burst length for DDR2 with 32 bits The burst length should be 4 for DDR2 with 32 bits bus Signed-off-by: Dave Liu --- diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 647813f68d..2c17cee31a 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -574,7 +574,10 @@ long int spd_sdram() /* Check DIMM data bus width */ if (spd.dataw_lsb == 0x20) { - burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ + if (spd.mem_type == SPD_MEMTYPE_DDR) + burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ + if (spd.mem_type == SPD_MEMTYPE_DDR2) + burstlen = 0x02; /* 32 bit data bus, burst len is 4 */ printf("\n DDR DIMM: data bus width is 32 bit"); } else { burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */ @@ -730,8 +733,12 @@ long int spd_sdram() sdram_cfg |= 0x10000000; /* The DIMM is 32bit width */ - if (spd.dataw_lsb == 0x20) - sdram_cfg |= 0x000C0000; + if (spd.dataw_lsb == 0x20) { + if (spd.mem_type == SPD_MEMTYPE_DDR) + sdram_cfg |= 0x000C0000; + if (spd.mem_type == SPD_MEMTYPE_DDR2) + sdram_cfg |= 0x00080000; + } ddrc_ecc_enable = 0;