From: Eric Bollengier Date: Thu, 6 Nov 2008 13:57:26 +0000 (+0000) Subject: ebl Allow binaries in an other location X-Git-Tag: Release-7.0.0~3784 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=07154dd981ee4fecdba085f192857774f468a5b8;p=bacula%2Fbacula ebl Allow binaries in an other location git-svn-id: https://bacula.svn.sourceforge.net/svnroot/bacula/trunk@7991 91ce42f0-d328-0410-95d8-f526ca767f89 --- diff --git a/bacula/patches/testing/regress-opt-bacula.patch b/bacula/patches/testing/regress-opt-bacula.patch new file mode 100644 index 0000000000..427b464e81 --- /dev/null +++ b/bacula/patches/testing/regress-opt-bacula.patch @@ -0,0 +1,1843 @@ +Index: scripts/copy-tls-confs +=================================================================== +--- scripts/copy-tls-confs (révision 7895) ++++ scripts/copy-tls-confs (copie de travail) +@@ -1,8 +1,8 @@ + #!/bin/sh + +-/bin/cp -f scripts/tls-bacula-dir.conf bin/bacula-dir.conf +-/bin/cp -f scripts/tls-bacula-sd.conf bin/bacula-sd.conf +-/bin/cp -f scripts/tls-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/tls-bacula-dir.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/tls-bacula-sd.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/tls-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + /bin/cp -f scripts/tls-CA.pem bin/tls-CA.pem + /bin/cp -f scripts/tls-cert.pem bin/tls-cert.pem +Index: scripts/cleanup-tape.in +=================================================================== +--- scripts/cleanup-tape.in (révision 7895) ++++ scripts/cleanup-tape.in (copie de travail) +@@ -12,16 +12,16 @@ + init_slot @tape_drive@ $SLOT1 + + if test x@autochanger@ != x/dev/null; then +- slot=`bin/@changer_script@ @autochanger@ loaded 0 @tape_drive@ $DRIVE1` ++ slot=`$scripts/@changer_script@ @autochanger@ loaded 0 @tape_drive@ $DRIVE1` + case $slot in + 0) +- bin/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 ++ $scripts/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 + ;; + $SLOT1) + ;; + *) +- bin/@changer_script@ @autochanger@ unload $slot @tape_drive@ $DRIVE1 +- bin/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 ++ $scripts/@changer_script@ @autochanger@ unload $slot @tape_drive@ $DRIVE1 ++ $scripts/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 + ;; + esac + fi +Index: scripts/prepare-two-tapes.in +=================================================================== +--- scripts/prepare-two-tapes.in (révision 7895) ++++ scripts/prepare-two-tapes.in (copie de travail) +@@ -18,10 +18,10 @@ + # optimize so we don't unnecessarily unload and load slots + # + if test x@autochanger@ != x/dev/null; then +- slot=`bin/@changer_script@ @autochanger@ loaded 0 @tape_drive@ $DRIVE1` ++ slot=`$scripts/@changer_script@ @autochanger@ loaded 0 @tape_drive@ $DRIVE1` + case $slot in + 0) +- bin/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 ++ $scripts/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 + slot=$SLOT1 + ;; + $SLOT1) +@@ -31,22 +31,22 @@ + slot=$SLOT2 + ;; + *) +- bin/@changer_script@ @autochanger@ unload $slot @tape_drive@ $DRIVE1 +- bin/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 ++ $scripts/@changer_script@ @autochanger@ unload $slot @tape_drive@ $DRIVE1 ++ $scripts/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 + slot=$SLOT1 + ;; + esac + init_drive @tape_drive@ +- bin/@changer_script@ @autochanger@ unload $slot @tape_drive@ $DRIVE1 ++ $scripts/@changer_script@ @autochanger@ unload $slot @tape_drive@ $DRIVE1 + + + # init the other slot + case $slot in + $SLOT1) +- bin/@changer_script@ @autochanger@ load $SLOT2 @tape_drive@ $DRIVE1 ++ $scripts/@changer_script@ @autochanger@ load $SLOT2 @tape_drive@ $DRIVE1 + ;; + $SLOT2) +- bin/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 ++ $scripts/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ $DRIVE1 + ;; + *) + echo "Something went wrong. Expected $SLOT1 or $SLOT2, got $slot" +Index: scripts/copy-2tape-confs +=================================================================== +--- scripts/copy-2tape-confs (révision 7895) ++++ scripts/copy-2tape-confs (copie de travail) +@@ -1,11 +1,10 @@ + #!/bin/sh +-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-2tape.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-sd-2tape.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + outf="tmp/sed_tmp" + echo "s%# Autochanger = yes% Autochanger = yes%g" >${outf} +-cp bin/bacula-dir.conf tmp/1 +-sed -f ${outf} tmp/1 >bin/bacula-dir.conf ++cp $bin/bacula-dir.conf tmp/1 ++sed -f ${outf} scripts/bacula-dir-tape.conf > $bin/bacula-dir.conf + + scripts/set_tape_options +Index: scripts/copy-tls-auth-conf +=================================================================== +--- scripts/copy-tls-auth-conf (révision 7895) ++++ scripts/copy-tls-auth-conf (copie de travail) +@@ -1,8 +1,8 @@ + #!/bin/sh + +-/bin/cp -f scripts/tls-auth-bacula-dir.conf bin/bacula-dir.conf +-/bin/cp -f scripts/tls-auth-bacula-sd.conf bin/bacula-sd.conf +-/bin/cp -f scripts/tls-auth-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/tls-auth-bacula-dir.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/tls-auth-bacula-sd.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/tls-auth-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + /bin/cp -f scripts/tls-CA.pem bin/tls-CA.pem + /bin/cp -f scripts/tls-cert.pem bin/tls-cert.pem +Index: scripts/copy-crypto-confs +=================================================================== +--- scripts/copy-crypto-confs (révision 7895) ++++ scripts/copy-crypto-confs (copie de travail) +@@ -1,7 +1,7 @@ + #!/bin/sh +-/bin/cp -f scripts/new-test-bacula-dir.conf bin/bacula-dir.conf +-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf +-/bin/cp -f scripts/crypto-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/new-test-bacula-dir.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/test-bacula-sd.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/crypto-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + /bin/cp -f scripts/cryptokeypair.pem bin/cryptokeypair.pem + /bin/cp -f scripts/master2048.cert bin/master2048.cert +Index: scripts/check_for_zombie_jobs +=================================================================== +--- scripts/check_for_zombie_jobs (révision 7895) ++++ scripts/check_for_zombie_jobs (copie de travail) +@@ -14,7 +14,7 @@ + client=${HOST}-fd + fi + +-bin/bconsole -c bin/bconsole.conf <&1 >/dev/null ++$bin/bconsole -c $bin/bconsole.conf <&1 >/dev/null + @output tmp/dir.out + status dir + @output tmp/fd.out +Index: scripts/copy-2client-confs +=================================================================== +--- scripts/copy-2client-confs (révision 7895) ++++ scripts/copy-2client-confs (copie de travail) +@@ -1,9 +1,10 @@ + #!/bin/sh +-/bin/cp -f scripts/bacula-dir-2client.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-2disk-drive.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++ ++/bin/cp -f scripts/bacula-dir-2client.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/bacula-sd-2disk-drive.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + outf="tmp/sed_tmp" + echo "s%# Autochanger = yes% Autochanger = yes%g" >${outf} +-cp bin/bacula-dir.conf tmp/1 +-sed -f ${outf} tmp/1 >bin/bacula-dir.conf ++cp $bin/bacula-dir.conf tmp/1 ++sed -f ${outf} tmp/1 >$bin/bacula-dir.conf +Index: scripts/copy-confs +=================================================================== +--- scripts/copy-confs (révision 7895) ++++ scripts/copy-confs (copie de travail) +@@ -1,7 +1,7 @@ + #!/bin/sh +-/bin/cp -f scripts/bacula-dir.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd.conf bin/bacula-sd.conf +-/bin/cp -f scripts/bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/bconsole.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-dir.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/bacula-sd.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/bconsole.conf $bin/bconsole.conf + + scripts/set_tape_options +Index: scripts/copy-win32-confs +=================================================================== +--- scripts/copy-win32-confs (révision 7895) ++++ scripts/copy-win32-confs (copie de travail) +@@ -1,7 +1,7 @@ + #!/bin/sh +-/bin/cp -f scripts/win32-bacula-dir-tape.conf bin/bacula-dir.conf +-/bin/cp -f scripts/win32-bacula-sd-tape.conf bin/bacula-sd.conf +-/bin/cp -f scripts/win32-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/win32-bacula-dir-tape.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/win32-bacula-sd-tape.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/win32-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + + scripts/set_tape_options +Index: scripts/copy-2disk-confs +=================================================================== +--- scripts/copy-2disk-confs (révision 7895) ++++ scripts/copy-2disk-confs (copie de travail) +@@ -2,11 +2,11 @@ + # + # Setup for using the Virtual Disk Changer (simulates tape changer) + # +-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-2disk.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-dir-tape.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/bacula-sd-2disk.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + outf="tmp/sed_tmp" + echo "s%# Autochanger = yes% Autochanger = yes%g" >${outf} +-cp bin/bacula-dir.conf tmp/1 +-sed -f ${outf} tmp/1 >bin/bacula-dir.conf ++cp $bin/bacula-dir.conf tmp/1 ++sed -f ${outf} tmp/1 >$bin/bacula-dir.conf +Index: scripts/setup +=================================================================== +--- scripts/setup (révision 7895) ++++ scripts/setup (copie de travail) +@@ -20,6 +20,7 @@ + exit 1 + fi + ++# we build and setup binaries to the $cwd/bin directory not $bin + rm -rf build bin + # Copy new source + echo "Copying source from ${BACULA_SOURCE}" +Index: scripts/copy-virtual-confs +=================================================================== +--- scripts/copy-virtual-confs (révision 7895) ++++ scripts/copy-virtual-confs (copie de travail) +@@ -2,7 +2,7 @@ + # + # Setup for using the Virtual Disk Changer (simulates tape changer) + # +-/bin/cp -f scripts/bacula-dir-virtual.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-virtual.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-dir-virtual.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/bacula-sd-virtual.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf +Index: scripts/copy-migration-confs +=================================================================== +--- scripts/copy-migration-confs (révision 7895) ++++ scripts/copy-migration-confs (copie de travail) +@@ -2,7 +2,7 @@ + # + # Setup for using the Virtual Disk Changer (simulates tape changer) + # +-/bin/cp -f scripts/bacula-dir-migration.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-migration.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-dir-migration.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/bacula-sd-migration.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf +Index: scripts/copy-2drive-confs +=================================================================== +--- scripts/copy-2drive-confs (révision 7895) ++++ scripts/copy-2drive-confs (copie de travail) +@@ -1,11 +1,9 @@ + #!/bin/sh +-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-2drive.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-sd-2drive.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + outf="tmp/sed_tmp" + echo "s%# Autochanger = yes% Autochanger = yes%g" >${outf} +-cp bin/bacula-dir.conf tmp/1 +-sed -f ${outf} tmp/1 >bin/bacula-dir.conf ++sed -f ${outf} scripts/bacula-dir-tape.conf > $bin/bacula-dir.conf + + scripts/set_tape_options +Index: scripts/copy-strip-confs +=================================================================== +--- scripts/copy-strip-confs (révision 7895) ++++ scripts/copy-strip-confs (copie de travail) +@@ -1,7 +1,7 @@ + #!/bin/sh +-/bin/cp -f scripts/bacula-dir-strip.conf bin/bacula-dir.conf +-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-dir-strip.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/test-bacula-sd.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + + scripts/set_tape_options +Index: scripts/copy-test-confs +=================================================================== +--- scripts/copy-test-confs (révision 7895) ++++ scripts/copy-test-confs (copie de travail) +@@ -1,7 +1,7 @@ + #!/bin/sh +-/bin/cp -f scripts/new-test-bacula-dir.conf bin/bacula-dir.conf +-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/new-test-bacula-dir.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/test-bacula-sd.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + + scripts/set_tape_options +Index: scripts/copy-2disk-drive-confs +=================================================================== +--- scripts/copy-2disk-drive-confs (révision 7895) ++++ scripts/copy-2disk-drive-confs (copie de travail) +@@ -1,10 +1,8 @@ + #!/bin/sh +-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-2disk-drive.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-sd-2disk-drive.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + outf="tmp/sed_tmp" + echo "s%# Autochanger = yes% Autochanger = yes%g" >${outf} +-cp bin/bacula-dir.conf tmp/1 +-sed -f ${outf} tmp/1 >bin/bacula-dir.conf ++sed -f ${outf} scripts/bacula-dir-tape.conf > $bin/bacula-dir.conf + +Index: scripts/copy-fifo-confs +=================================================================== +--- scripts/copy-fifo-confs (révision 7895) ++++ scripts/copy-fifo-confs (copie de travail) +@@ -1,7 +1,7 @@ + #!/bin/sh +-/bin/cp -f scripts/bacula-dir-fifo.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-fifo.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-dir-fifo.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/bacula-sd-fifo.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + + scripts/set_tape_options +Index: scripts/copy-tape-confs +=================================================================== +--- scripts/copy-tape-confs (révision 7895) ++++ scripts/copy-tape-confs (copie de travail) +@@ -1,7 +1,7 @@ + #!/bin/sh +-/bin/cp -f scripts/bacula-dir-tape.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-tape.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/bacula-dir-tape.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/bacula-sd-tape.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + + scripts/set_tape_options +Index: scripts/cleanup-2drive.in +=================================================================== +--- scripts/cleanup-2drive.in (révision 7895) ++++ scripts/cleanup-2drive.in (copie de travail) +@@ -6,40 +6,40 @@ + scripts/cleanup + + if test x@autochanger@ != x/dev/null; then +- slot=`bin/@changer_script@ @autochanger@ loaded 0 @tape_drive1@ 1` ++ slot=`$scripts/@changer_script@ @autochanger@ loaded 0 @tape_drive1@ 1` + echo "Slot $slot in drive 1" + if test x$slot != x0 ; then + echo "unload slot $slot in drive 1" +- bin/@changer_script@ @autochanger@ unload $slot @tape_drive1@ 1 ++ $scripts/@changer_script@ @autochanger@ unload $slot @tape_drive1@ 1 + fi +- slot=`bin/@changer_script@ @autochanger@ loaded 0 @tape_drive@ 0` ++ slot=`$scripts/@changer_script@ @autochanger@ loaded 0 @tape_drive@ 0` + echo "Slot $slot in drive 0" + if test x$slot != x0 ; then + echo "unload slot $slot in drive 0" +- bin/@changer_script@ @autochanger@ unload $slot @tape_drive@ 0 ++ $scripts/@changer_script@ @autochanger@ unload $slot @tape_drive@ 0 + fi + + +- slot=`bin/@changer_script@ @autochanger@ loaded 0 @tape_drive1@ 1` ++ slot=`$scripts/@changer_script@ @autochanger@ loaded 0 @tape_drive1@ 1` + if test x$slot != x$SLOT2; then + echo "load slot $SLOT2 in drive 1" +- bin/@changer_script@ @autochanger@ load $SLOT2 @tape_drive1@ 1 ++ $scripts/@changer_script@ @autochanger@ load $SLOT2 @tape_drive1@ 1 + fi + echo "WEOF drive 1" + init_drive @tape_drive1@ + + echo "unload slot $SLOT2 in drive 1" +- bin/@changer_script@ @autochanger@ unload $SLOT2 @tape_drive1@ 1 ++ $scripts/@changer_script@ @autochanger@ unload $SLOT2 @tape_drive1@ 1 + +- slot=`bin/@changer_script@ @autochanger@ loaded 0 @tape_drive@ 0` ++ slot=`$scripts/@changer_script@ @autochanger@ loaded 0 @tape_drive@ 0` + echo "Slot $slot in drive 0" + if test x$slot != x$SLOT1; then + echo "load slot $SLOT1 in drive 0" +- bin/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ 0 ++ $scripts/@changer_script@ @autochanger@ load $SLOT1 @tape_drive@ 0 + fi + echo "WEOF drive 0" + init_drive @tape_drive@ + + echo "unload slot $SLOT1 from drive 0" +- bin/@changer_script@ @autochanger@ unload $SLOT1 @tape_drive@ 0 ++ $scripts/@changer_script@ @autochanger@ unload $SLOT1 @tape_drive@ 0 + fi +Index: scripts/copy-testa-confs +=================================================================== +--- scripts/copy-testa-confs (révision 7895) ++++ scripts/copy-testa-confs (copie de travail) +@@ -1,7 +1,7 @@ + #!/bin/sh +-/bin/cp -f scripts/testa-bacula-dir.conf bin/bacula-dir.conf +-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/testa-bacula-dir.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/test-bacula-sd.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + + scripts/set_tape_options +Index: scripts/functions +=================================================================== +--- scripts/functions (révision 7895) ++++ scripts/functions (copie de travail) +@@ -9,12 +9,12 @@ + outf="tmp/sed_tmp" + echo "s% mail =%# mail = %g" >${outf} + echo "s% operator =%# operator =%g" >>${outf} +- cp bin/bacula-dir.conf tmp/1 +- sed -f ${outf} tmp/1 >bin/bacula-dir.conf ++ cp $bin/bacula-dir.conf tmp/1 ++ sed -f ${outf} tmp/1 >$bin/bacula-dir.conf + echo " " + echo " " + echo " === Starting $TestName at `date +%R:%S` ===" +- echo " === Starting $TestName at `date +%R:%S` ===" >>working/log ++ echo " === Starting $TestName at `date +%R:%S` ===" >>$working/log + echo " " + export zstat + } +@@ -144,14 +144,14 @@ + debug_wait + zstat=0 + if test "$debug" -eq 1 ; then +- bin/bacula-ctl-sd start +- bin/bacula-ctl-fd start $1 +- bin/bacula-ctl-dir start +- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf ++ $bin/bacula-ctl-sd start ++ $bin/bacula-ctl-fd start $1 ++ $bin/bacula-ctl-dir start ++ cat tmp/bconcmds | $bin/bconsole -c $bin/bconsole.conf + return $? + else +- bin/bacula start 2>&1 >/dev/null +- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null ++ $bin/bacula start >/dev/null 2>&1 ++ cat tmp/bconcmds | $bin/bconsole -c $bin/bconsole.conf >/dev/null 2>&1 + return $? + fi + } +@@ -159,27 +159,27 @@ + run_bconsole() + { + if test "$debug" -eq 1 ; then +- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf ++ cat tmp/bconcmds | $bin/bconsole -c $bin/bconsole.conf + else +- cat tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null ++ cat tmp/bconcmds | $bin/bconsole -c $bin/bconsole.conf 2>&1 >/dev/null + fi + } + + run_btape() + { + if test "$debug" -eq 1 ; then +- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 | tee tmp/log1.out ++ cat tmp/bconcmds | $bin/btape -c $bin/bacula-sd.conf DDS-4 | tee tmp/log1.out + else +- cat tmp/bconcmds | bin/btape -c bin/bacula-sd.conf DDS-4 2>&1 >tmp/log1.out ++ cat tmp/bconcmds | $bin/btape -c $bin/bacula-sd.conf DDS-4 >tmp/log1.out 2>&1 + fi + } + + run_bscan() + { + if test "$debug" -eq 1 ; then +- bin/bscan $* | tee tmp/log.out ++ $bin/bscan $* | tee tmp/log.out + else +- bin/bscan $* 2>&1 >/dev/null ++ $bin/bscan $* 2>&1 >/dev/null + fi + } + +@@ -201,7 +201,7 @@ + + stop_bacula() + { +- bin/bacula stop 2>&1 >/dev/null ++ $bin/bacula stop 2>&1 >/dev/null + } + + check_for_zombie_jobs() +@@ -218,23 +218,23 @@ + oldname=$1 + newname=$2 + fi +- rm -f bin/1 +- mv bin/bacula-dir.conf bin/1 ++ rm -f $bin/1 ++ mv $bin/bacula-dir.conf $bin/1 + echo "s%${oldname}%${newname}%g" >tmp/1 +- sed -f tmp/1 bin/1 >bin/bacula-dir.conf ++ sed -f tmp/1 $bin/1 >$bin/bacula-dir.conf + # echo "Job ${oldname} changed to ${newname}" + } + + check_two_logs() + { + grep "^ Termination: *Backup OK" tmp/log1.out 2>&1 >/dev/null +- bstat=${bstat-$?} ++ bstat=${bstat:-$?} + grep "^ Termination: .*Backup Error" tmp/log1.out 2>&1 >/dev/null + if test $? -eq 0; then + bstat=2 + fi + grep "^ Termination: *Restore OK" tmp/log2.out 2>&1 >/dev/null +- rstat=${rstat-$?} ++ rstat=${rstat:-$?} + grep "^ Termination: .*Restore Error" tmp/log2.out 2>&1 >/dev/null + if test $? -eq 0; then + rstat=2 +@@ -356,10 +356,10 @@ + load_slot1() + { + # Get a tape from slot1 +-slot=`bin/$MTX ${AUTOCHANGER} loaded 0 ${TAPE_DRIVE} $DRIVE1` ++slot=`$bin/$MTX ${AUTOCHANGER} loaded 0 ${TAPE_DRIVE} $DRIVE1` + case $slot in + 0) +- bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1 ++ $bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1 + slot=$SLOT1 + ;; + $SLOT1) +@@ -367,8 +367,8 @@ + ;; + *) + rewind_drive ${TAPE_DRIVE} +- bin/$MTX ${AUTOCHANGER} unload $slot ${TAPE_DRIVE} $DRIVE1 +- bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1 ++ $bin/$MTX ${AUTOCHANGER} unload $slot ${TAPE_DRIVE} $DRIVE1 ++ $bin/$MTX ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1 + slot=$SLOT1 + ;; + esac +@@ -383,17 +383,17 @@ + rewind_drive ${TAPE_DRIVE} + case $1 in + 0) +- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1 ++ $bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1 + slot=1 + ;; + $SLOT1) +- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1 +- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT2 ${TAPE_DRIVE} $DRIVE1 ++ $bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1 ++ $bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT2 ${TAPE_DRIVE} $DRIVE1 + slot=2 + ;; + $SLOT2) +- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1 +- bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1 ++ $bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $1 ${TAPE_DRIVE} $DRIVE1 ++ $bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} load $SLOT1 ${TAPE_DRIVE} $DRIVE1 + slot=1 + ;; + *) +@@ -418,16 +418,23 @@ + db_name=${db_name:-"regress"} + db_user=${db_user:-"regress"} + db_password=${db_password:-""} ++working=${working:-"$cwd/working"} ++bin=${bin:-"$cwd/bin"} ++scripts=${scripts:-"$bin"} + ++export bin ++export working ++export scripts ++ + CLIENT=${HOST}-fd + + if [ x$USE_VTAPE = xyes ]; then +- mkdir -p $cwd/working/ach ++ mkdir -p $working/ach + SLOT1=1 + SLOT2=2 +- TAPE_DRIVE=$cwd/working/ach/drive1 +- TAPE_DRIVE1=$cwd/working/ach/drive1 +- AUTOCHANGER=$cwd/working/ach/config ++ TAPE_DRIVE=$working/ach/drive1 ++ TAPE_DRIVE1=$working/ach/drive1 ++ AUTOCHANGER=$working/ach/config + AUTOCHANGER_SCRIPT=disk-changer + DRIVE1=0 + DRIVE2=1 +@@ -438,6 +445,6 @@ + fi + + AUTOCHANGER_SCRIPT=${AUTOCHANGER_SCRIPT:-mtx-changer} +-LD_LIBRARY_PATH=$cwd/bin ++LD_LIBRARY_PATH=$bin + export LD_LIBRARY_PATH + +Index: scripts/copy-plugin-confs +=================================================================== +--- scripts/copy-plugin-confs (révision 7895) ++++ scripts/copy-plugin-confs (copie de travail) +@@ -1,7 +1,7 @@ + #!/bin/sh +-/bin/cp -f scripts/plugin-test-bacula-dir.conf bin/bacula-dir.conf +-/bin/cp -f scripts/test-bacula-sd.conf bin/bacula-sd.conf +-/bin/cp -f scripts/test-bacula-fd.conf bin/bacula-fd.conf +-/bin/cp -f scripts/test-console.conf bin/bconsole.conf ++/bin/cp -f scripts/plugin-test-bacula-dir.conf $bin/bacula-dir.conf ++/bin/cp -f scripts/test-bacula-sd.conf $bin/bacula-sd.conf ++/bin/cp -f scripts/test-bacula-fd.conf $bin/bacula-fd.conf ++/bin/cp -f scripts/test-console.conf $bin/bconsole.conf + + scripts/set_tape_options +Index: tests/maxvol-test +=================================================================== +--- tests/maxvol-test (révision 7895) ++++ tests/maxvol-test (copie de travail) +@@ -13,8 +13,8 @@ + scripts/copy-test-confs + echo "${cwd}/build" >${cwd}/tmp/file-list + +-cp -f ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 +-sed "s%# Maximum Volume Jobs% Maximum Volume Jobs%" ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++cp -f $bin/bacula-dir.conf ${cwd}/tmp/1 ++sed "s%# Maximum Volume Jobs% Maximum Volume Jobs%" ${cwd}/tmp/1 >$bin/bacula-dir.conf + + + change_jobname NightlySave $JobName +Index: tests/eot-fail-tape +=================================================================== +--- tests/eot-fail-tape (révision 7895) ++++ tests/eot-fail-tape (copie de travail) +@@ -14,8 +14,8 @@ + + out="${cwd}/tmp/sed_tmp" + echo "s%# Maximum File Size% Maximum File Size%g" >${out} +-cp -f ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed -f ${out} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp -f $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed -f ${out} ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname $JobName + start_test +Index: tests/two-volume-test +=================================================================== +--- tests/two-volume-test (révision 7895) ++++ tests/two-volume-test (copie de travail) +@@ -20,8 +20,8 @@ + + outf="tmp/sed_tmp" + echo "s%# Maximum File Size% Maximum File Size%g" >${outf} +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname NightlySave $JobName + start_test +Index: tests/ansi-label-tape +=================================================================== +--- tests/ansi-label-tape (révision 7895) ++++ tests/ansi-label-tape (copie de travail) +@@ -15,7 +15,7 @@ + require_tape_drive + + scripts/copy-tape-confs +-/bin/cp -f scripts/ansi-sd-tape.conf bin/bacula-sd.conf ++cp -f scripts/ansi-sd-tape.conf $bin/bacula-sd.conf + scripts/cleanup-tape + + echo "${cwd}/build" >${cwd}/tmp/file-list +Index: tests/2drive-2disk +=================================================================== +--- tests/2drive-2disk (révision 7895) ++++ tests/2drive-2disk (copie de travail) +@@ -23,10 +23,10 @@ + # Turn off Prefer Mounted Volumes so we use 2 drives + outf="${cwd}/tmp/sed_tmp" + echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf} +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 + # Comment the next line out to write everything to one drive + # otherwise, it writes the two jobs to different drives +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + # Write out bconsole commands + cat <${cwd}/tmp/bconcmds +Index: tests/btape-fill-full-tape +=================================================================== +--- tests/btape-fill-full-tape (révision 7895) ++++ tests/btape-fill-full-tape (copie de travail) +@@ -14,7 +14,7 @@ + change_jobname $JobName + start_test + +-bin/btape -c bin/bacula-sd.conf DDS-4 <&1 >${cwd}/tmp/log1.out ++$bin/btape -c $bin/bacula-sd.conf DDS-4 <${cwd}/tmp/log1.out 2>&1 + fill + s + +@@ -22,7 +22,7 @@ + END_OF_DATA + + +-grep "^The last block on the tape matches\. Test succeeded\." ${cwd}/tmp/log1.out 2>&1 >/dev/null ++grep "^The last block on the tape matches\. Test succeeded\." ${cwd}/tmp/log1.out >/dev/null 2>&1 + if [ $? != 0 ] ; then + echo " " + echo " " +Index: tests/big-fileset-test +=================================================================== +--- tests/big-fileset-test (révision 7895) ++++ tests/big-fileset-test (copie de travail) +@@ -11,8 +11,8 @@ + + echo "${cwd}/build" >${cwd}/tmp/file-list + +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 +-sed "s%# Label Format% Label Format%" ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 ++sed "s%# Label Format% Label Format%" ${cwd}/tmp/1 >$bin/bacula-dir.conf + + change_jobname MonsterFileSet $JobName + start_test +Index: tests/bad-label-changer +=================================================================== +--- tests/bad-label-changer (révision 7895) ++++ tests/bad-label-changer (copie de travail) +@@ -19,8 +19,8 @@ + + #outf="tmp/sed_tmp" + #echo "s%# Maximum File Size% Maximum File Size%g" >${outf} +-#cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-#sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++#cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++#sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname $JobName + start_test +Index: tests/migration-volume-test +=================================================================== +--- tests/migration-volume-test (révision 7895) ++++ tests/migration-volume-test (copie de travail) +@@ -14,8 +14,8 @@ + scripts/copy-migration-confs + scripts/prepare-disk-changer + echo "${cwd}/build" >${cwd}/tmp/file-list +-#cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-#sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++#cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++#sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname NightlySave $JobName + start_test +Index: tests/dev-test-root +=================================================================== +--- tests/dev-test-root (révision 7895) ++++ tests/dev-test-root (copie de travail) +@@ -42,9 +42,9 @@ + # More cleanup needed below + + cd / +-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/original ++$bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/original + cd ${cwd}/tmp/bacula-restores +-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/restored ++$bin/testls -e ${cwd}/scripts/exclude-etc-test dev >${cwd}/tmp/restored + cd ${cwd}/tmp + # + # Use sed to cut out parts that *always* change +Index: tests/disk-changer-test +=================================================================== +--- tests/disk-changer-test (révision 7895) ++++ tests/disk-changer-test (copie de travail) +@@ -3,43 +3,43 @@ + mkdir tmp/disk-changer + touch tmp/disk-changer/conf + echo "Unload drive 0" +-bin/disk-changer tmp/disk-changer/conf unload 1 tmp/disk-changer/drive0 0 ++$scripts/disk-changer tmp/disk-changer/conf unload 1 tmp/disk-changer/drive0 0 + echo "rtn=$?" + echo "Test what is in drive 0" +-bin/disk-changer tmp/disk-changer/conf loaded 1 tmp/disk-changer/drive0 0 ++$scripts/disk-changer tmp/disk-changer/conf loaded 1 tmp/disk-changer/drive0 0 + echo "rtn=$?" + echo "Load Slot 1 into drive 0" +-bin/disk-changer tmp/disk-changer/conf load 1 tmp/disk-changer/drive0 0 ++$scripts/disk-changer tmp/disk-changer/conf load 1 tmp/disk-changer/drive0 0 + echo "rtn=$?" + echo "Test what is in drive 0" +-bin/disk-changer tmp/disk-changer/conf loaded 1 tmp/disk-changer/drive0 0 ++$scripts/disk-changer tmp/disk-changer/conf loaded 1 tmp/disk-changer/drive0 0 + echo "rtn=$?" + + echo "Unload drive 1" +-bin/disk-changer tmp/disk-changer/conf unload 2 tmp/disk-changer/drive1 1 ++$scripts/disk-changer tmp/disk-changer/conf unload 2 tmp/disk-changer/drive1 1 + echo "rtn=$?" + echo "Test what is in drive 1" +-bin/disk-changer tmp/disk-changer/conf loaded 1 tmp/disk-changer/drive1 1 ++$scripts/disk-changer tmp/disk-changer/conf loaded 1 tmp/disk-changer/drive1 1 + echo "rtn=$?" + echo "Load Slot 2 drive 1" +-bin/disk-changer tmp/disk-changer/conf load 2 tmp/disk-changer/drive1 1 ++$scripts/disk-changer tmp/disk-changer/conf load 2 tmp/disk-changer/drive1 1 + echo "rtn=$?" + echo "Test what is in drive 1" +-bin/disk-changer tmp/disk-changer/conf loaded 1 tmp/disk-changer/drive1 1 ++$scripts/disk-changer tmp/disk-changer/conf loaded 1 tmp/disk-changer/drive1 1 + echo "rtn=$?" + + echo "Load Slot 1 into drive 0 -- error" +-bin/disk-changer tmp/disk-changer/conf load 1 tmp/disk-changer/drive0 0 ++$scripts/disk-changer tmp/disk-changer/conf load 1 tmp/disk-changer/drive0 0 + echo "rtn=$?" + echo "Load Slot 2 into drive 1 -- error" +-bin/disk-changer tmp/disk-changer/conf load 2 tmp/disk-changer/drive1 1 ++$scripts/disk-changer tmp/disk-changer/conf load 2 tmp/disk-changer/drive1 1 + echo "rtn=$?" + echo "Load Slot 2 in drive 0 -- error" +-bin/disk-changer tmp/disk-changer/conf load 2 tmp/disk-changer/drive0 0 ++$scripts/disk-changer tmp/disk-changer/conf load 2 tmp/disk-changer/drive0 0 + echo "rtn=$?" + echo "Unload drive 0" +-bin/disk-changer tmp/disk-changer/conf unload 1 tmp/disk-changer/drive0 0 ++$scripts/disk-changer tmp/disk-changer/conf unload 1 tmp/disk-changer/drive0 0 + echo "rtn=$?" + echo "Load Slot 2 in drive 0 -- should fail" +-bin/disk-changer tmp/disk-changer/conf load 2 tmp/disk-changer/drive0 0 ++$scripts/disk-changer tmp/disk-changer/conf load 2 tmp/disk-changer/drive0 0 + echo "rtn=$?" +Index: tests/restore-disk-seek-test +=================================================================== +--- tests/restore-disk-seek-test (révision 7895) ++++ tests/restore-disk-seek-test (copie de travail) +@@ -42,8 +42,8 @@ + # Enable MaximumFileSize to ensure lots of JobMedia records and thus + # lots of seeking + # +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname CompressedTest $JobName + start_test +Index: tests/bug-fatal-test +=================================================================== +--- tests/bug-fatal-test (révision 7895) ++++ tests/bug-fatal-test (copie de travail) +@@ -10,9 +10,9 @@ + + copy_test_confs + +-rm -f bin/bacula-dir.conf ++rm -f $bin/bacula-dir.conf + rm -f ${cwd}/tmp/RUN*log +-/bin/cp -f scripts/bacula-dir.conf.testrunscript bin/bacula-dir.conf ++cp -f scripts/bacula-dir.conf.testrunscript $bin/bacula-dir.conf + + rm -f ${cwd}/tmp/file-list + # ${cwd}/tmp/file-list doesn't exists +@@ -34,12 +34,11 @@ + END_OF_DATA + + +-bin/bacula start +-cat ${cwd}/tmp/bconcmds | bin/bconsole -c bin/bconsole.conf > /dev/null ++run_bacula + stop_bacula + +-export dstat=0 +-export bstat=0 +-export rstat=0 ++dstat=0 ++bstat=0 ++rstat=0 + + end_test +Index: tests/regexwhere-test +=================================================================== +--- tests/regexwhere-test (révision 7895) ++++ tests/regexwhere-test (copie de travail) +@@ -11,7 +11,7 @@ + scripts/cleanup + scripts/copy-test-confs + +-/bin/cp -f scripts/bacula-dir.conf.regexwhere bin/bacula-dir.conf ++cp -f scripts/bacula-dir.conf.regexwhere $bin/bacula-dir.conf + + # + # Remove the !restored from the messages resource because +@@ -20,8 +20,8 @@ + # + outf="${cwd}/tmp/sed_tmp" + echo "s%, \!restored%%g" >${outf} +-cp ${cwd}/bin/bacula-fd.conf ${cwd}/tmp/1 +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-fd.conf ++cp $bin/bacula-fd.conf ${cwd}/tmp/1 ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-fd.conf + + echo "${cwd}/build/po" >tmp/file-list + +Index: tests/copy-time-test +=================================================================== +--- tests/copy-time-test (révision 7912) ++++ tests/copy-time-test (copie de travail) +@@ -14,8 +14,8 @@ + scripts/copy-migration-confs + scripts/prepare-disk-changer + echo "${cwd}/build" >${cwd}/tmp/file-list +-sed 's/migrate/copy/g' ${cwd}/bin/bacula-dir.conf > ${cwd}/tmp/1 +-sed 's/Migrate/Copy/g' ${cwd}/tmp/1 > ${cwd}/bin/bacula-dir.conf ++sed 's/migrate/copy/g' $bin/bacula-dir.conf > ${cwd}/tmp/1 ++sed 's/Migrate/Copy/g' ${cwd}/tmp/1 > $bin/bacula-dir.conf + + change_jobname NightlySave $JobName + start_test +Index: tests/fixed-block-size-tape +=================================================================== +--- tests/fixed-block-size-tape (révision 7895) ++++ tests/fixed-block-size-tape (copie de travail) +@@ -14,10 +14,10 @@ + + echo "${cwd}/build" >${cwd}/tmp/file-list + +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 + echo "s%# Maximum Block Size% Maximum Block Size%" >${cwd}/tmp/2 + echo "s%# Minimum Block Size% Minimum Block Size%" >>${cwd}/tmp/2 +-sed -f ${cwd}/tmp/2 ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++sed -f ${cwd}/tmp/2 ${cwd}/tmp/1 >$bin/bacula-sd.conf + if [ $? != 0 ] ; then + echo " " + echo " " +Index: tests/next-vol-test +=================================================================== +--- tests/next-vol-test (révision 7937) ++++ tests/next-vol-test (copie de travail) +@@ -17,8 +17,8 @@ + require_linux + scripts/cleanup + scripts/copy-tape-confs +-cp scripts/bacula-dir-vtape.conf bin/bacula-dir.conf +-cp scripts/bacula-sd-vtape.conf bin/bacula-sd.conf ++cp scripts/bacula-dir-vtape.conf $bin/bacula-dir.conf ++cp scripts/bacula-sd-vtape.conf $bin/bacula-sd.conf + scripts/prepare-fake-autochanger + + +Index: tests/errors-test +=================================================================== +--- tests/errors-test (révision 7895) ++++ tests/errors-test (copie de travail) +@@ -12,7 +12,7 @@ + copy_test_confs + + rm -f ${cwd}/tmp/*.log +-/bin/cp -f scripts/bacula-dir.conf.errors bin/bacula-dir.conf ++cp -f scripts/bacula-dir.conf.errors $bin/bacula-dir.conf + echo "${cwd}/build/po" >${cwd}/tmp/file-list + + start_test +@@ -64,7 +64,7 @@ + + run_bacula + touch ${cwd}/tmp/log1.out +-client=$(grep client= bin/bacula-dir.conf) ++client=`grep client= $bin/bacula-dir.conf` + check_for_zombie_jobs storage=File $client + stop_bacula + +Index: tests/three-pool-test +=================================================================== +--- tests/three-pool-test (révision 7895) ++++ tests/three-pool-test (copie de travail) +@@ -23,10 +23,10 @@ + # Turn off Prefer Mounted Volumes so we use 2 drives + outf="${cwd}/tmp/sed_tmp" + echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf} +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 + # Comment the next line out to write everything to one drive + # otherwise, it writes the two jobs to different drives +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + # Write out bconsole commands + cat <${cwd}/tmp/bconcmds +Index: tests/copy-job-test +=================================================================== +--- tests/copy-job-test (révision 7895) ++++ tests/copy-job-test (copie de travail) +@@ -14,8 +14,8 @@ + scripts/copy-migration-confs + scripts/prepare-disk-changer + echo "${cwd}/build" >${cwd}/tmp/file-list +-sed 's/migrate/copy/g' ${cwd}/bin/bacula-dir.conf > ${cwd}/tmp/1 +-sed 's/Migrate/Copy/g' ${cwd}/tmp/1 > ${cwd}/bin/bacula-dir.conf ++sed 's/migrate/copy/g' $bin/bacula-dir.conf > ${cwd}/tmp/1 ++sed 's/Migrate/Copy/g' ${cwd}/tmp/1 > $bin/bacula-dir.conf + + + change_jobname NightlySave $JobName +Index: tests/restore-seek-tape +=================================================================== +--- tests/restore-seek-tape (révision 7895) ++++ tests/restore-seek-tape (copie de travail) +@@ -45,8 +45,8 @@ + # Enable MaximumFileSize to ensure lots of JobMedia records and thus + # lots of seeking + # +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed "s%# Maximum File Size = 1000000% Maximum File Size = 10KB%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed "s%# Maximum File Size = 1000000% Maximum File Size = 10KB%" ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname NightlySave $JobName + start_test +Index: tests/2drive-incremental-changer +=================================================================== +--- tests/2drive-incremental-changer (révision 7895) ++++ tests/2drive-incremental-changer (copie de travail) +@@ -31,10 +31,10 @@ + # Turn off Prefer Mounted Volumes so we use 2 drives + outf="${cwd}/tmp/sed_tmp" + echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf} +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 + # Comment the next line out to write everything to one drive + # otherwise, it writes the two jobs to different drives +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + start_test + +Index: tests/restore-by-file-tape +=================================================================== +--- tests/restore-by-file-tape (révision 7895) ++++ tests/restore-by-file-tape (copie de travail) +@@ -18,8 +18,8 @@ + echo "${cwd}/build" >${cwd}/tmp/file-list + sed s%\^%${cwd}% ${cwd}/scripts/flist | sort | uniq >${cwd}/tmp/restore2-list + +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname NightlySave $JobName + start_test +@@ -93,7 +93,7 @@ + check_two_logs + + scripts/check_for_zombie_jobs storage=DDS-4 +-bin/bacula stop 2>&1 >/dev/null ++stop_bacula + for i in `cat ${cwd}/tmp/restore2-list`; do + diff $i ${cwd}/tmp/bacula-restores$i + if [ $? != 0 ] ; then +Index: tests/vtape-test-changer +=================================================================== +--- tests/vtape-test-changer (révision 7897) ++++ tests/vtape-test-changer (copie de travail) +@@ -19,8 +19,8 @@ + + scripts/cleanup + scripts/copy-tape-confs +-cp scripts/bacula-dir-vtape.conf bin/bacula-dir.conf +-cp scripts/bacula-sd-vtape.conf bin/bacula-sd.conf ++cp scripts/bacula-dir-vtape.conf $bin/bacula-dir.conf ++cp scripts/bacula-sd-vtape.conf $bin/bacula-sd.conf + scripts/prepare-fake-autochanger + + echo "${cwd}/build" >${cwd}/tmp/file-list +@@ -30,7 +30,7 @@ + when1=`perl -MPOSIX -e "print strftime('%F %T', localtime(time+30))"` + when2=`perl -MPOSIX -e "print strftime('%F %T', localtime(time+45))"` + +-clientname=`awk '/Name = .*-fd/ { if (!ok) { print $3 ; ok=1 } }' bin/bacula-dir.conf` ++clientname=`awk '/Name = .*-fd/ { if (!ok) { print $3 ; ok=1 } }' $bin/bacula-dir.conf` + + # Catalog record for cleaning tape "CLN01" successfully created. + # CLN01 | Cleaning +Index: tests/cancel-test +=================================================================== +--- tests/cancel-test (révision 7895) ++++ tests/cancel-test (copie de travail) +@@ -17,13 +17,13 @@ + # + outf="tmp/sed_tmp" + echo "s% Schedule =%# Schedule =%g" >$outf +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + touch tmp/log1.out + + # Add some jobs and fileset for this test +-cat <>${cwd}/bin/bacula-dir.conf ++cat <>$bin/bacula-dir.conf + FileSet { + Name = FS_ERR + Include { +Index: tests/bug-897 +=================================================================== +--- tests/bug-897 (révision 7895) ++++ tests/bug-897 (copie de travail) +@@ -9,13 +9,13 @@ + . scripts/functions + copy_test_confs + +-rm -f bin/bacula-dir.conf ++rm -f $bin/bacula-dir.conf + rm -f ${cwd}/tmp/RUN*log + rm -f ${cwd}/tmp/fifo + rm -f ${cwd}/tmp/RUN_BUG_897 + rm -f ${cwd}/tmp/RUN_FD_FAILED + +-/bin/cp -f scripts/bacula-dir.conf.testrunscript bin/bacula-dir.conf ++cp -f scripts/bacula-dir.conf.testrunscript $bin/bacula-dir.conf + + echo "${cwd}/build/po" >${cwd}/tmp/file-list + echo "${cwd}/tmp/fifo" >> ${cwd}/tmp/file-list +Index: tests/scratch-pool-test +=================================================================== +--- tests/scratch-pool-test (révision 7895) ++++ tests/scratch-pool-test (copie de travail) +@@ -28,8 +28,8 @@ + + outf="${cwd}/tmp/sed_tmp" + echo "s%# Maximum File Size% Maximum File Size%g" >${outf} +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname NightlySave $JobName + start_test +Index: tests/six-vol-test +=================================================================== +--- tests/six-vol-test (révision 7895) ++++ tests/six-vol-test (copie de travail) +@@ -15,7 +15,7 @@ + scripts/cleanup + scripts/copy-testa-confs + # copy special conf file +-/bin/cp -f scripts/testb-bacula-dir.conf bin/bacula-dir.conf ++cp -f scripts/testb-bacula-dir.conf $bin/bacula-dir.conf + + echo "${cwd}/tmp/largefile" >${cwd}/tmp/file-list + # Create 56MB file with random data +Index: tests/2drive-swap-test +=================================================================== +--- tests/2drive-swap-test (révision 7895) ++++ tests/2drive-swap-test (copie de travail) +@@ -22,10 +22,10 @@ + # Turn off Prefer Mounted Volumes so we use 2 drives + outf="${cwd}/tmp/sed_tmp" + echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf} +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 + # Comment the next line out to write everything to one drive + # otherwise, it writes the two jobs to different drives +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + # Write out bconsole commands + cat <${cwd}/tmp/bconcmds +Index: tests/usr-tape-root +=================================================================== +--- tests/usr-tape-root (révision 7895) ++++ tests/usr-tape-root (copie de travail) +@@ -15,8 +15,7 @@ + echo " " + echo " " + +-bin/bacula start 2>&1 >/dev/null +-bin/bconsole -c bin/bconsole.conf < ${cwd}/tmp/bconcmds + @output /dev/null + messages + @output tmp/log1.out +@@ -35,7 +34,8 @@ + @output + quit + END_OF_DATA +-bin/bacula stop 2>&1 >/dev/null ++run_bacula ++stop_bacula + cd / + ${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/original + cd ${cwd}/tmp/bacula-restores +Index: tests/multi-client-test +=================================================================== +--- tests/multi-client-test (révision 7895) ++++ tests/multi-client-test (copie de travail) +@@ -11,7 +11,7 @@ + + scripts/cleanup + scripts/copy-test-confs +-/bin/cp -f scripts/multi-client-bacula-dir.conf bin/bacula-dir.conf ++cp -f scripts/multi-client-bacula-dir.conf $bin/bacula-dir.conf + + change_jobname NightlySave $JobName + start_test +Index: tests/small-file-size-tape +=================================================================== +--- tests/small-file-size-tape (révision 7895) ++++ tests/small-file-size-tape (copie de travail) +@@ -13,8 +13,8 @@ + scripts/cleanup-tape + + echo "${cwd}/build" >${cwd}/tmp/file-list +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname NightlySave $JobName + start_test +Index: tests/2drive-offline-test +=================================================================== +--- tests/2drive-offline-test (révision 7895) ++++ tests/2drive-offline-test (copie de travail) +@@ -25,10 +25,10 @@ + # Turn off Prefer Mounted Volumes so we use 2 drives + outf="${cwd}/tmp/sed_tmp" + echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf} +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 + # Comment the next line out to write everything to one drive + # otherwise, it writes the two jobs to different drives +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + # Write out bconsole commands + cat <${cwd}/tmp/bconcmds +Index: tests/concurrent-jobs-test +=================================================================== +--- tests/concurrent-jobs-test (révision 7895) ++++ tests/concurrent-jobs-test (copie de travail) +@@ -16,7 +16,7 @@ + dd if=/dev/urandom of=${cwd}/tmp/largefile bs=1024 count=55000 + else + echo "Creating a 56MB file with bacula-dir data ..." +- dd if=bin/bacula-dir of=${cwd}/tmp/1 bs=1024 count=1000 ++ dd if=$bin/bacula-dir of=${cwd}/tmp/1 bs=1024 count=1000 + cat ${cwd}/tmp/1 ${cwd}/tmp/1 ${cwd}/tmp/1 ${cwd}/tmp/1 ${cwd}/tmp/1 >${cwd}/tmp/2 + rm -f ${cwd}/tmp/1 + cat ${cwd}/tmp/2 ${cwd}/tmp/2 ${cwd}/tmp/2 ${cwd}/tmp/2 ${cwd}/tmp/2 >>${cwd}/tmp/3 +Index: tests/2drive-2job-test +=================================================================== +--- tests/2drive-2job-test (révision 7895) ++++ tests/2drive-2job-test (copie de travail) +@@ -22,10 +22,10 @@ + # Turn off Prefer Mounted Volumes so we use 2 drives + outf="${cwd}/tmp/sed_tmp" + echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf} +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 + # Comment the next line out to write everything to one drive + # otherwise, it writes the two jobs to different drives +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + # Write out bconsole commands + cat <${cwd}/tmp/bconcmds +Index: tests/accurate-test +=================================================================== +--- tests/accurate-test (révision 7895) ++++ tests/accurate-test (copie de travail) +@@ -14,9 +14,9 @@ + scripts/cleanup + + copy_test_confs +-/bin/cp -f scripts/bacula-dir.conf.accurate bin/bacula-dir.conf +-sed s/all,/all,saved,/ bin/bacula-fd.conf > tmp/1 +-cp tmp/1 bin/bacula-fd.conf ++cp -f scripts/bacula-dir.conf.accurate $bin/bacula-dir.conf ++sed s/all,/all,saved,/ $bin/bacula-fd.conf > tmp/1 ++cp tmp/1 $bin/bacula-fd.conf + + change_jobname Client1 $JobName + +@@ -156,7 +156,7 @@ + # Check with bls + ################################################################ + +-${cwd}/bin/bls -c ${cwd}/bin/bacula-sd.conf -V 'TestVolume001' FileStorage > tmp/bls.out ++$bin/bls -c $bin/bacula-sd.conf -V 'TestVolume001' FileStorage > tmp/bls.out + grep -- '----' tmp/bls.out | grep xxx > /dev/null + if [ $? != 0 ] ; then + bstat=2 +@@ -280,7 +280,7 @@ + + bscan_libdbi + +-${cwd}/bin/bscan -c ${cwd}/bin/bacula-sd.conf $BSCANLIBDBI -n regress -u regress -m -s -b tmp/bscan.bsr FileStorage 2>&1 > ${cwd}/tmp/bscan.log ++$bin/bscan -c $bin/bacula-sd.conf $BSCANLIBDBI -n regress -u regress -m -s -b tmp/bscan.bsr FileStorage 2>&1 > ${cwd}/tmp/bscan.log + + cat <${cwd}/tmp/bconcmds + @$out ${cwd}/tmp/log1.out +Index: tests/backup-bacula-test +=================================================================== +--- tests/backup-bacula-test (révision 7895) ++++ tests/backup-bacula-test (copie de travail) +@@ -16,8 +16,8 @@ + # + outf="tmp/sed_tmp" + echo "s% Schedule =%# Schedule =%g" >${outf} +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + change_jobname Client1 $JobName + start_test +Index: tests/virtual-changer-test +=================================================================== +--- tests/virtual-changer-test (révision 7895) ++++ tests/virtual-changer-test (copie de travail) +@@ -24,10 +24,10 @@ + # Turn off Prefer Mounted Volumes so we use 2 drives + outf="${cwd}/tmp/sed_tmp" + echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf} +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 + # Comment the next line out to write everything to one drive + # otherwise, it writes the two jobs to different drives +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + # Write out bconsole commands + cat <${cwd}/tmp/bconcmds +Index: tests/incremental-2disk +=================================================================== +--- tests/incremental-2disk (révision 7895) ++++ tests/incremental-2disk (copie de travail) +@@ -9,14 +9,7 @@ + JobName=Inc2disk + . scripts/functions + +- +-stop_bacula +-cd bin +-./drop_bacula_tables >/dev/null 2>&1 +-./make_bacula_tables >/dev/null 2>&1 +-./grant_bacula_privileges 2>&1 >/dev/null +-cd .. +- ++scripts/cleanup + scripts/copy-2disk-confs + scripts/prepare-disk-changer + +Index: tests/stats-test +=================================================================== +--- tests/stats-test (révision 7895) ++++ tests/stats-test (copie de travail) +@@ -16,8 +16,8 @@ + outf="tmp/sed_tmp" + echo "s% Schedule =%# Schedule =%g" > $outf + echo "s% DIRport%Statistics Retention = 1 sec; DIRport%g" >> $outf +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + change_jobname Client1 $JobName + start_test +Index: tests/lib-tape-root +=================================================================== +--- tests/lib-tape-root (révision 7895) ++++ tests/lib-tape-root (copie de travail) +@@ -5,13 +5,7 @@ + # + cwd=`pwd` + . scripts/functions +-bin/bacula stop 2>&1 >/dev/null +-cd bin +-./drop_bacula_tables >/dev/null 2>&1 +-./make_bacula_tables >/dev/null 2>&1 +-./grant_bacula_privileges 2>&1 >/dev/null +-cd .. +- ++scripts/cleanup + scripts/cleanup-tape + scripts/copy-tape-confs + echo "/lib" >${cwd}/tmp/file-list +@@ -20,8 +14,8 @@ + echo " === Starting lib-tape-root test ===" + echo " " + echo " " +-bin/bacula start 2>&1 >/dev/null +-bin/bconsole -c bin/bconsole.conf < >${cwd}/tmp/bconcmds + @output /dev/null + messages + @output ${cwd}/tmp/log1.out +@@ -40,7 +34,10 @@ + @output + quit + END_OF_DATA +-bin/bacula stop 2>&1 >/dev/null ++ ++run_bacula ++stop_bacula ++ + cd / + ${cwd}/bin/testls -e ${cwd}/scripts/exclude-usr-test lib >${cwd}/tmp/original + cd ${cwd}/tmp/bacula-restores +Index: tests/three-pool-recycle-test +=================================================================== +--- tests/three-pool-recycle-test (révision 7895) ++++ tests/three-pool-recycle-test (copie de travail) +@@ -19,8 +19,8 @@ + scripts/prepare-disk-changer + + # remove Client Run Before Job +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 +-sed "s%Client Run Before Job%#Client Run Before Job%" ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 ++sed "s%Client Run Before Job%#Client Run Before Job%" ${cwd}/tmp/1 >$bin/bacula-dir.conf + + echo "${cwd}/build" >${cwd}/tmp/file-list + +Index: tests/win32-test +=================================================================== +--- tests/win32-test (révision 7895) ++++ tests/win32-test (copie de travail) +@@ -9,7 +9,7 @@ + + scripts/cleanup + scripts/copy-test-confs +-cp scripts/win32-bacula-dir.conf bin/bacula-dir.conf ++cp scripts/win32-bacula-dir.conf $bin/bacula-dir.conf + + change_jobname NightlySave $JobName + start_test +Index: tests/maxtime-test +=================================================================== +--- tests/maxtime-test (révision 7941) ++++ tests/maxtime-test (copie de travail) +@@ -11,7 +11,7 @@ + copy_test_confs + + rm -f ${cwd}/tmp/RUN*log +-cp -f ${cwd}/scripts/bacula-dir.conf.maxtime ${cwd}/bin/bacula-dir.conf ++cp -f ${cwd}/scripts/bacula-dir.conf.maxtime $bin/bacula-dir.conf + WHEN=`date '+%Y-%m-%d %H:%M:%S'` + + echo "${cwd}/build/po" >${cwd}/tmp/file-list +Index: tests/copy-jobspan-test +=================================================================== +--- tests/copy-jobspan-test (révision 7895) ++++ tests/copy-jobspan-test (copie de travail) +@@ -16,10 +16,10 @@ + scripts/copy-migration-confs + scripts/prepare-disk-changer + echo "${cwd}/build" >${cwd}/tmp/file-list +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf +-sed 's/migrate/copy/g' ${cwd}/bin/bacula-dir.conf > ${cwd}/tmp/1 +-sed 's/Migrate/Copy/g' ${cwd}/tmp/1 > ${cwd}/bin/bacula-dir.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >$bin/bacula-sd.conf ++sed 's/migrate/copy/g' $bin/bacula-dir.conf > ${cwd}/tmp/1 ++sed 's/Migrate/Copy/g' ${cwd}/tmp/1 > $bin/bacula-dir.conf + + change_jobname NightlySave $JobName + start_test +Index: tests/two-volume-changer +=================================================================== +--- tests/two-volume-changer (révision 7895) ++++ tests/two-volume-changer (copie de travail) +@@ -20,8 +20,8 @@ + + outf="tmp/sed_tmp" + echo "s%# Maximum File Size% Maximum File Size%g" >${outf} +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname $JobName + start_test +@@ -54,7 +54,7 @@ + check_for_zombie_jobs storage=DDS-4 + stop_bacula + +-bin/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $SLOT2 ${TAPE_DRIVE} 0 ++$scripts/${AUTOCHANGER_SCRIPT} ${AUTOCHANGER} unload $SLOT2 ${TAPE_DRIVE} 0 + + cat <tmp/bconcmds + @$out /dev/null +Index: tests/incremental-2media-tape +=================================================================== +--- tests/incremental-2media-tape (révision 7895) ++++ tests/incremental-2media-tape (copie de travail) +@@ -15,10 +15,10 @@ + + scripts/cleanup + # Get conf files +-/bin/cp -f scripts/bacula-dir-2d.conf bin/bacula-dir.conf +-/bin/cp -f scripts/bacula-sd-2d.conf bin/bacula-sd.conf +-/bin/cp -f scripts/bacula-fd-2d.conf bin/bacula-fd.conf +-/bin/cp -f scripts/bconsole-2d.conf bin/bconsole.conf ++cp -f scripts/bacula-dir-2d.conf $bin/bacula-dir.conf ++cp -f scripts/bacula-sd-2d.conf $bin/bacula-sd.conf ++cp -f scripts/bacula-fd-2d.conf $bin/bacula-fd.conf ++cp -f scripts/bconsole-2d.conf $bin/bconsole.conf + + # get proper SD tape definitions + cp -f scripts/linux_tape_options bin/tape_options +Index: tests/bextract-test +=================================================================== +--- tests/bextract-test (révision 7895) ++++ tests/bextract-test (copie de travail) +@@ -45,9 +45,9 @@ + + mkdir -p ${cwd}/tmp/bacula-restores + if test "$debug" -eq 1 ; then +- bin/bextract -v -b working/restore.bsr -c bin/bacula-sd.conf ${cwd}/tmp ${cwd}/tmp/bacula-restores ++ $bin/bextract -v -b working/restore.bsr -c $bin/bacula-sd.conf ${cwd}/tmp ${cwd}/tmp/bacula-restores + else +- bin/bextract -b working/restore.bsr -c bin/bacula-sd.conf ${cwd}/tmp ${cwd}/tmp/bacula-restores 2>&1 >/dev/null ++ $bin/bextract -b working/restore.bsr -c $bin/bacula-sd.conf ${cwd}/tmp ${cwd}/tmp/bacula-restores 2>&1 >/dev/null + fi + rstat=$? + grep "^ Termination: *Backup OK" ${cwd}/tmp/log1.out 2>&1 >/dev/null +Index: tests/copy-volume-test +=================================================================== +--- tests/copy-volume-test (révision 7895) ++++ tests/copy-volume-test (copie de travail) +@@ -14,12 +14,12 @@ + scripts/copy-migration-confs + scripts/prepare-disk-changer + echo "${cwd}/build" >${cwd}/tmp/file-list +-#cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-#sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++#cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++#sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname NightlySave $JobName +-sed 's/migrate/copy/g' ${cwd}/bin/bacula-dir.conf > ${cwd}/tmp/1 +-sed 's/Migrate/Copy/g' ${cwd}/tmp/1 > ${cwd}/bin/bacula-dir.conf ++sed 's/migrate/copy/g' $bin/bacula-dir.conf > ${cwd}/tmp/1 ++sed 's/Migrate/Copy/g' ${cwd}/tmp/1 > $bin/bacula-dir.conf + rm -f ${cwd}/build/po/test.po >/dev/null + + start_test +Index: tests/four-jobs-tape +=================================================================== +--- tests/four-jobs-tape (révision 7895) ++++ tests/four-jobs-tape (copie de travail) +@@ -30,13 +30,7 @@ + messages + quit + END_OF_DATA +-if test "$debug" -eq 1 ; then +- bin/bacula start +- cat ${cwd}/tmp/bconcmds | bin/bconsole -c bin/bconsole.conf +-else +- bin/bacula start 2>&1 >/dev/null +- cat ${cwd}/tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null +-fi ++run_bacula + + scripts/check_for_zombie_jobs storage=DDS-4 + echo "Backup 1 done" +@@ -56,14 +50,9 @@ + messages + quit + END_OF_DATA +-if test "$debug" -eq 1 ; then +- bin/bacula start +- cat ${cwd}/tmp/bconcmds | bin/bconsole -c bin/bconsole.conf +-else +- bin/bacula start 2>&1 >/dev/null +- cat ${cwd}/tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null +-fi + ++run_bacula ++ + scripts/check_for_zombie_jobs storage=DDS-4 + echo "Backup 2 done" + touch ${cwd}/build/src/dird/*.c +@@ -80,14 +69,9 @@ + messages + quit + END_OF_DATA +-if test "$debug" -eq 1 ; then +- bin/bacula start +- cat ${cwd}/tmp/bconcmds | bin/bconsole -c bin/bconsole.conf +-else +- bin/bacula start 2>&1 >/dev/null +- cat ${cwd}/tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null +-fi + ++run_bacula ++ + scripts/check_for_zombie_jobs storage=DDS-4 + echo "Backup 3 done" + # make some files for the incremental to pick up +@@ -104,13 +88,7 @@ + messages + quit + END_OF_DATA +-if test "$debug" -eq 1 ; then +- bin/bacula start +- cat ${cwd}/tmp/bconcmds | bin/bconsole -c bin/bconsole.conf +-else +- bin/bacula start 2>&1 >/dev/null +- cat ${cwd}/tmp/bconcmds | bin/bconsole -c bin/bconsole.conf 2>&1 >/dev/null +-fi ++run_bacula + + scripts/check_for_zombie_jobs storage=DDS-4 + echo "Backup 4 done" +Index: tests/migration-jobspan-test +=================================================================== +--- tests/migration-jobspan-test (révision 7895) ++++ tests/migration-jobspan-test (copie de travail) +@@ -16,8 +16,8 @@ + scripts/copy-migration-confs + scripts/prepare-disk-changer + echo "${cwd}/build" >${cwd}/tmp/file-list +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >$bin/bacula-sd.conf + + + change_jobname NightlySave $JobName +Index: tests/2drive-3pool-test +=================================================================== +--- tests/2drive-3pool-test (révision 7895) ++++ tests/2drive-3pool-test (copie de travail) +@@ -23,10 +23,10 @@ + # Turn off Prefer Mounted Volumes so we use 2 drives + # outf="tmp/sed_tmp" + # echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf} +-# cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 ++# cp $bin/bacula-dir.conf ${cwd}/tmp/1 + # Comment the next line out to write everything to one drive + # otherwise, it writes the two jobs to different drives +-# sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++# sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + # Write out bconsole commands + cat <${cwd}/tmp/bconcmds +Index: tests/bscan-test +=================================================================== +--- tests/bscan-test (révision 7895) ++++ tests/bscan-test (copie de travail) +@@ -67,9 +67,9 @@ + fi + + if test "$debug" -eq 1 ; then +- bin/bscan -w working $BSCANLIBDBI -u ${db_user} -n ${db_name} $PASSWD -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf ${cwd}/tmp ++ $bin/bscan -w working $BSCANLIBDBI -u ${db_user} -n ${db_name} $PASSWD -m -s -v -b tmp/bscan.bsr -c $bin/bacula-sd.conf ${cwd}/tmp + else +- bin/bscan -w working $BSCANLIBDBI -u ${db_user} -n ${db_name} $PASSWD -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf ${cwd}/tmp 2>&1 >tmp/log3.out ++ $bin/bscan -w working $BSCANLIBDBI -u ${db_user} -n ${db_name} $PASSWD -m -s -v -b tmp/bscan.bsr -c $bin/bacula-sd.conf ${cwd}/tmp >tmp/log3.out 2>&1 + fi + + cat <tmp/bconcmds +Index: tests/2drive-incremental-2disk +=================================================================== +--- tests/2drive-incremental-2disk (révision 7895) ++++ tests/2drive-incremental-2disk (copie de travail) +@@ -30,10 +30,10 @@ + # Turn off Prefer Mounted Volumes so we use 2 drives + outf="${cwd}/tmp/sed_tmp" + echo "s%# Prefer Mounted Volumes% Prefer Mounted Volumes%g" >${outf} +-cp ${cwd}/bin/bacula-dir.conf ${cwd}/tmp/1 ++cp $bin/bacula-dir.conf ${cwd}/tmp/1 + # Comment the next line out to write everything to one drive + # otherwise, it writes the two jobs to different drives +-sed -f ${outf} ${cwd}/tmp/1 >${cwd}/bin/bacula-dir.conf ++sed -f ${outf} ${cwd}/tmp/1 >$bin/bacula-dir.conf + + # Write out bconsole commands + cat <${cwd}/tmp/bconcmds +Index: tests/runscript-test +=================================================================== +--- tests/runscript-test (révision 7895) ++++ tests/runscript-test (copie de travail) +@@ -9,12 +9,12 @@ + . scripts/functions + copy_test_confs + +-rm -f bin/bacula-dir.conf ++rm -f $bin/bacula-dir.conf + rm -f ${cwd}/tmp/RUN*log + rm -f ${cwd}/tmp/RUN_FD_FAILED + + touch ${cwd}/tmp/log1.out +-/bin/cp -f scripts/bacula-dir.conf.testrunscript bin/bacula-dir.conf ++cp -f scripts/bacula-dir.conf.testrunscript $bin/bacula-dir.conf + + echo "${cwd}/build/po" >${cwd}/tmp/file-list + +Index: tests/bscan-fast-tape +=================================================================== +--- tests/bscan-fast-tape (révision 7895) ++++ tests/bscan-fast-tape (copie de travail) +@@ -15,8 +15,8 @@ + + echo "${cwd}/build" >${cwd}/tmp/file-list + +-cp ${cwd}/bin/bacula-sd.conf ${cwd}/tmp/1 +-# sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf ${cwd}/tmp/1 ++# sed "s%# Maximum File Size% Maximum File Size%" ${cwd}/tmp/1 >$bin/bacula-sd.conf + + change_jobname NightlySave $JobName + start_test +@@ -34,7 +34,7 @@ + END_OF_DATA + + echo "Starting Bacula tape writing" +-#bin/btape -c bin/bacula-sd.conf /dev/nst0 <tmp/bconcmds + @$out /dev/null +Index: tests/etc-test-root +=================================================================== +--- tests/etc-test-root (révision 7895) ++++ tests/etc-test-root (copie de travail) +@@ -44,9 +44,9 @@ + # more cleanup needed below + + cd / +-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/1 ++$bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/1 + cd ${cwd}/tmp/bacula-restores +-${cwd}/bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/2 ++$bin/testls -e ${cwd}/scripts/exclude-etc-test etc >${cwd}/tmp/2 + sort <${cwd}/tmp/1 >${cwd}/tmp/original + sort <${cwd}/tmp/2 >${cwd}/tmp/restored + rm -f ${cwd}/tmp/1 ${cwd}/tmp/2 +Index: tests/bscan-tape +=================================================================== +--- tests/bscan-tape (révision 7895) ++++ tests/bscan-tape (copie de travail) +@@ -15,8 +15,8 @@ + + echo "${cwd}/build" >tmp/file-list + +-cp ${cwd}/bin/bacula-sd.conf tmp/1 +-sed "s%# Maximum File Size% Maximum File Size%" tmp/1 >${cwd}/bin/bacula-sd.conf ++cp $bin/bacula-sd.conf tmp/1 ++sed "s%# Maximum File Size% Maximum File Size%" tmp/1 >$bin/bacula-sd.conf + + change_jobname NightlySave $JobName + start_test +@@ -106,9 +106,9 @@ + fi + + if test "$debug" -eq 1 ; then +- bin/bscan -w working $BSCANLIBDBI -u ${db_user} -n ${db_name} $PASSWD -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf DDS-4 ++ $bin/bscan -w working $BSCANLIBDBI -u ${db_user} -n ${db_name} $PASSWD -m -s -v -b tmp/bscan.bsr -c $bin/bacula-sd.conf DDS-4 + else +- bin/bscan -w working $BSCANLIBDBI -u ${db_user} -n ${db_name} $PASSWD -m -s -v -b tmp/bscan.bsr -c bin/bacula-sd.conf DDS-4 2>&1 >/dev/null ++ $bin/bscan -w working $BSCANLIBDBI -u ${db_user} -n ${db_name} $PASSWD -m -s -v -b tmp/bscan.bsr -c $bin/bacula-sd.conf DDS-4 >/dev/null 2>&1 + fi + + echo $BSCANLIBDBI +Index: tests/big-files-test +=================================================================== +--- tests/big-files-test (révision 7895) ++++ tests/big-files-test (copie de travail) +@@ -22,8 +22,8 @@ + time perl -e 'for($i=0; $i < 2000000; $i++) {open(FP, ">${i}file${i}") or die "$!"; print FP "$i\n"; close(FP); print "." if ($i%10000);}' + fi + +-sed "s%# Label Format% Label Format%" ${cwd}/bin/bacula-dir.conf > ${cwd}/tmp/1 +-sed "s%Type = Backup%Type = Backup; Accurate = yes" ${cwd}/tmp/1 > ${cwd}/bin/bacula-dir.conf ++sed "s%# Label Format% Label Format%" $bin/bacula-dir.conf > ${cwd}/tmp/1 ++sed "s%Type = Backup%Type = Backup; Accurate = yes" ${cwd}/tmp/1 > $bin/bacula-dir.conf + + change_jobname MonsterFileSet $JobName + start_test