From: Sanchayan Maity Date: Tue, 9 Aug 2016 18:14:59 +0000 (+0530) Subject: usb: host: ehci-vf: Migrate Vybrid USB to driver model X-Git-Tag: v2016.11-rc1~29^2~7 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=0885cdb9d154ac0f63bb681d4f280a39de354f8c;p=u-boot usb: host: ehci-vf: Migrate Vybrid USB to driver model Add driver model support for Vybrid USB driver. Signed-off-by: Sanchayan Maity --- diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c index 61789dddc3..f6f9efb6cd 100644 --- a/drivers/usb/host/ehci-vf.c +++ b/drivers/usb/host/ehci-vf.c @@ -8,16 +8,20 @@ */ #include +#include #include #include #include #include +#include #include #include #include #include #include #include +#include +#include #include "ehci.h" @@ -32,6 +36,8 @@ #define UCMD_RUN_STOP (1 << 0) /* controller run/stop */ #define UCMD_RESET (1 << 1) /* controller reset */ +DECLARE_GLOBAL_DATA_PTR; + static const unsigned phy_bases[] = { USB_PHY0_BASE_ADDR, USB_PHY1_BASE_ADDR, @@ -131,24 +137,39 @@ int __weak board_ehci_hcd_init(int port) return 0; } +int ehci_vf_common_init(struct usb_ehci *ehci, int index) +{ + int ret; + + /* Do board specific initialisation */ + ret = board_ehci_hcd_init(index); + if (ret) + return ret; + + usb_power_config(index); + usb_oc_config(index); + usb_internal_phy_clock_gate(index); + usb_phy_enable(index, ehci); + + return 0; +} + +#ifndef CONFIG_DM_USB int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { struct usb_ehci *ehci; enum usb_init_type type; + int ret; if (index >= ARRAY_SIZE(nc_reg_bases)) return -EINVAL; ehci = (struct usb_ehci *)nc_reg_bases[index]; - /* Do board specific initialisation */ - board_ehci_hcd_init(index); - - usb_power_config(index); - usb_oc_config(index); - usb_internal_phy_clock_gate(index); - usb_phy_enable(index, ehci); + ret = ehci_vf_common_init(index); + if (ret) + return ret; *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); *hcor = (struct ehci_hcor *)((uint32_t)*hccr + @@ -175,3 +196,176 @@ int ehci_hcd_stop(int index) { return 0; } +#else +/* Possible port types (dual role mode) */ +enum dr_mode { + DR_MODE_NONE = 0, + DR_MODE_HOST, /* supports host operation */ + DR_MODE_DEVICE, /* supports device operation */ + DR_MODE_OTG, /* supports both */ +}; + +struct ehci_vf_priv_data { + struct ehci_ctrl ctrl; + struct usb_ehci *ehci; + struct gpio_desc cdet_gpio; + enum usb_init_type init_type; + enum dr_mode dr_mode; + u32 portnr; +}; + +static int vf_usb_ofdata_to_platdata(struct udevice *dev) +{ + struct ehci_vf_priv_data *priv = dev_get_priv(dev); + const void *dt_blob = gd->fdt_blob; + int node = dev->of_offset; + const char *mode; + + priv->portnr = dev->seq; + + priv->ehci = (struct usb_ehci *)dev_get_addr(dev); + mode = fdt_getprop(dt_blob, node, "dr_mode", NULL); + if (mode) { + if (0 == strcmp(mode, "host")) { + priv->dr_mode = DR_MODE_HOST; + priv->init_type = USB_INIT_HOST; + } else if (0 == strcmp(mode, "peripheral")) { + priv->dr_mode = DR_MODE_DEVICE; + priv->init_type = USB_INIT_DEVICE; + } else if (0 == strcmp(mode, "otg")) { + priv->dr_mode = DR_MODE_OTG; + /* + * We set init_type to device by default when OTG + * mode is requested. If a valid gpio is provided + * we will switch the init_type based on the state + * of the gpio pin. + */ + priv->init_type = USB_INIT_DEVICE; + } else { + debug("%s: Cannot decode dr_mode '%s'\n", + __func__, mode); + return -EINVAL; + } + } else { + priv->dr_mode = DR_MODE_HOST; + priv->init_type = USB_INIT_HOST; + } + + if (priv->dr_mode == DR_MODE_OTG) { + gpio_request_by_name_nodev(dt_blob, node, "fsl,cdet-gpio", 0, + &priv->cdet_gpio, GPIOD_IS_IN); + if (dm_gpio_is_valid(&priv->cdet_gpio)) { + if (dm_gpio_get_value(&priv->cdet_gpio)) + priv->init_type = USB_INIT_DEVICE; + else + priv->init_type = USB_INIT_HOST; + } + } + + return 0; +} + +static int vf_init_after_reset(struct ehci_ctrl *dev) +{ + struct ehci_vf_priv_data *priv = dev->priv; + enum usb_init_type type = priv->init_type; + struct usb_ehci *ehci = priv->ehci; + int ret; + + ret = ehci_vf_common_init(priv->ehci, priv->portnr); + if (ret) + return ret; + + if (type == USB_INIT_DEVICE) + return 0; + + setbits_le32(&ehci->usbmode, CM_HOST); + writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); + setbits_le32(&ehci->portsc, USB_EN); + + mdelay(10); + + return 0; +} + +static const struct ehci_ops vf_ehci_ops = { + .init_after_reset = vf_init_after_reset +}; + +static int vf_usb_bind(struct udevice *dev) +{ + static int num_controllers; + + /* + * Without this hack, if we return ENODEV for USB Controller 0, on + * probe for the next controller, USB Controller 1 will be given a + * sequence number of 0. This conflicts with our requirement of + * sequence numbers while initialising the peripherals. + */ + dev->req_seq = num_controllers; + num_controllers++; + + return 0; +} + +static int ehci_usb_probe(struct udevice *dev) +{ + struct usb_platdata *plat = dev_get_platdata(dev); + struct ehci_vf_priv_data *priv = dev_get_priv(dev); + struct usb_ehci *ehci = priv->ehci; + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + int ret; + + ret = ehci_vf_common_init(ehci, priv->portnr); + if (ret) + return ret; + + if (priv->init_type != plat->init_type) + return -ENODEV; + + if (priv->init_type == USB_INIT_HOST) { + setbits_le32(&ehci->usbmode, CM_HOST); + writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc); + setbits_le32(&ehci->portsc, USB_EN); + } + + mdelay(10); + + hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); + hcor = (struct ehci_hcor *)((uint32_t)hccr + + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + + return ehci_register(dev, hccr, hcor, &vf_ehci_ops, 0, priv->init_type); +} + +static int ehci_usb_remove(struct udevice *dev) +{ + int ret; + + ret = ehci_deregister(dev); + if (ret) + return ret; + + return 0; +} + +static const struct udevice_id vf_usb_ids[] = { + { .compatible = "fsl,vf610-usb" }, + { } +}; + +U_BOOT_DRIVER(usb_ehci) = { + .name = "ehci_vf", + .id = UCLASS_USB, + .of_match = vf_usb_ids, + .bind = vf_usb_bind, + .probe = ehci_usb_probe, + .remove = ehci_usb_remove, + .ops = &ehci_usb_ops, + .ofdata_to_platdata = vf_usb_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct usb_platdata), + .priv_auto_alloc_size = sizeof(struct ehci_vf_priv_data), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; +#endif