From: Yao Yuan Date: Tue, 3 Mar 2015 08:35:18 +0000 (+0800) Subject: ls1021atwr: add hwconfig setting to do pin mux X-Git-Tag: v2015.07-rc1~67^2~49 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=09227dd9df9b033be0a92bb5fa4319b22a9e6ba7;p=u-boot ls1021atwr: add hwconfig setting to do pin mux Freescale LS1021ATWR share some pins. Hwconfig option is used to allows users to choose the pin functions. Signed-off-by: Yuan Yao [York Sun: revised commit message] Reviewed-by: York Sun --- diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index a9c87f2a22..8633ec08dd 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -54,6 +55,17 @@ DECLARE_GLOBAL_DATA_PTR; #define KEEP_STATUS 0x0 #define NEED_RESET 0x1 +#define SOFT_MUX_ON_I2C3_IFC 0x2 +#define SOFT_MUX_ON_CAN3_USB2 0x8 +#define SOFT_MUX_ON_QE_LCD 0x10 + +#define PIN_I2C3_IFC_MUX_I2C3 0x0 +#define PIN_I2C3_IFC_MUX_IFC 0x1 +#define PIN_CAN3_USB2_MUX_USB2 0x0 +#define PIN_CAN3_USB2_MUX_CAN3 0x1 +#define PIN_QE_LCD_MUX_LCD 0x0 +#define PIN_QE_LCD_MUX_QE 0x1 + struct cpld_data { u8 cpld_ver; /* cpld revision */ u8 cpld_ver_sub; /* cpld sub revision */ @@ -271,6 +283,68 @@ int config_serdes_mux(void) } #endif +#ifndef CONFIG_QSPI_BOOT +int config_board_mux(void) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + int conflict_flag; + + conflict_flag = 0; + if (hwconfig("i2c3")) { + conflict_flag++; + cpld_data->soft_mux_on |= SOFT_MUX_ON_I2C3_IFC; + cpld_data->i2c3_ifc_mux = PIN_I2C3_IFC_MUX_I2C3; + } + + if (hwconfig("ifc")) { + conflict_flag++; + /* some signals can not enable simultaneous*/ + if (conflict_flag > 1) + goto conflict; + cpld_data->soft_mux_on |= SOFT_MUX_ON_I2C3_IFC; + cpld_data->i2c3_ifc_mux = PIN_I2C3_IFC_MUX_IFC; + } + + conflict_flag = 0; + if (hwconfig("usb2")) { + conflict_flag++; + cpld_data->soft_mux_on |= SOFT_MUX_ON_CAN3_USB2; + cpld_data->can3_usb2_mux = PIN_CAN3_USB2_MUX_USB2; + } + + if (hwconfig("can3")) { + conflict_flag++; + /* some signals can not enable simultaneous*/ + if (conflict_flag > 1) + goto conflict; + cpld_data->soft_mux_on |= SOFT_MUX_ON_CAN3_USB2; + cpld_data->can3_usb2_mux = PIN_CAN3_USB2_MUX_CAN3; + } + + conflict_flag = 0; + if (hwconfig("lcd")) { + conflict_flag++; + cpld_data->soft_mux_on |= SOFT_MUX_ON_QE_LCD; + cpld_data->qe_lcd_mux = PIN_QE_LCD_MUX_LCD; + } + + if (hwconfig("qe")) { + conflict_flag++; + /* some signals can not enable simultaneous*/ + if (conflict_flag > 1) + goto conflict; + cpld_data->soft_mux_on |= SOFT_MUX_ON_QE_LCD; + cpld_data->qe_lcd_mux = PIN_QE_LCD_MUX_QE; + } + + return 0; + +conflict: + printf("WARNING: pin conflict! MUX setting may failed!\n"); + return 0; +} +#endif + int board_early_init_f(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; @@ -480,6 +554,10 @@ int board_init(void) #if defined(CONFIG_MISC_INIT_R) int misc_init_r(void) { +#ifndef CONFIG_QSPI_BOOT + config_board_mux(); +#endif + #ifdef CONFIG_FSL_CAAM return sec_init(); #endif