From: simon qian <simonqian.openocd@gmail.com>
Date: Mon, 18 Jan 2010 07:37:15 +0000 (-0800)
Subject: read target voltage first in vsllink
X-Git-Tag: v0.4.0-rc2~78
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=0b641dac717ffe1391cc53dc33ad78ba79a26d2c;p=openocd

read target voltage first in vsllink

The very first command after init command should be "read target voltage".

This is a tweak for the Old Versaloon firmware.  Without this, in most
most cases, it works.   Under Ubuntu9.04, there is a chance that the USB
will fail.  The problem disappears if I read target voltage first.

For the lastest Versaloon firmware, it's OK.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---

diff --git a/src/jtag/drivers/vsllink.c b/src/jtag/drivers/vsllink.c
index d3012906..5c9a8db0 100644
--- a/src/jtag/drivers/vsllink.c
+++ b/src/jtag/drivers/vsllink.c
@@ -476,6 +476,14 @@ static int vsllink_init(void)
 	}
 	VSLLINK_USB_TIMEOUT = to_tmp;
 
+	vsllink_simple_command(0x01);
+	result = vsllink_usb_read(vsllink_handle);
+	if (result != 2)
+		LOG_WARNING("Fail to get target voltage");
+	else
+		LOG_INFO("Target runs at %d mV", vsllink_usb_in_buffer[0]
+				+ (vsllink_usb_in_buffer[1] << 8));
+
 	// connect to vsllink
 	vsllink_connect();
 	// initialize function pointers