From: Andreas Färber <afaerber@suse.de>
Date: Sat, 14 May 2016 18:21:49 +0000 (+0200)
Subject: Fix spelling of ARM Cortex
X-Git-Tag: v0.10.0-rc1~168
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=0c8ec7c826c60391034fe5f0ea90f8538ac94b38;p=openocd

Fix spelling of ARM Cortex

It's Cortex-Xn, not Cortex Xn or cortex xn or cortex-xn or CORTEX-Xn
or CortexXn. Further it's Cortex-M0+, not M0plus.

Cf. http://www.arm.com/products/processors/index.php

Consistently write it the official way, so that it stops propagating.
Originally spotted in the documentation, it mainly affects code comments
but also Atmel SAM3/SAM4/SAMV, NiietCM4 and SiM3x flash driver output.

Found via:

  git grep -i "Cortex "
  git grep -i "Cortex-" | grep -v "Cortex-" | grep -v ".cpu"
  git grep -i "CortexM"

Change-Id: Ic7b6ca85253e027f6f0f751c628d1a2a391fe914
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3483
Tested-by: jenkins
Reviewed-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
---

diff --git a/NEWTAPS b/NEWTAPS
index 638fa005..10f30063 100644
--- a/NEWTAPS
+++ b/NEWTAPS
@@ -77,7 +77,7 @@ This is always a 32bit hex number.
 Examples:
     0x1f0f0f0f - is an old ARM7TDMI
     0x3f0f0f0f - is a newer ARM7TDMI
-    0x3ba00477 - is an ARM cortex M3
+    0x3ba00477 - is an ARM Cortex-M3
 
 Some chips have multiple JTAG taps - be sure to list
 each one individually - ORDER is important!
diff --git a/TODO b/TODO
index 8aac1575..f50af3ec 100644
--- a/TODO
+++ b/TODO
@@ -170,9 +170,9 @@ https://lists.berlios.de/pipermail/openocd-development/2009-October/011506.html
   garabage.
   - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...)
 - Thumb2 single stepping: ARM1156T2 needs simulator support
-- Cortex A8 support (ML)
+- Cortex-A8 support (ML)
   - add target implementation (ML)
-- Cortex M3 support
+- Cortex-M3 support
   - when stepping, only write dirtied registers (be faster)
   - when connecting to halted core, fetch registers (startup is quirky)
 - Generic ARM run_algorithm() interface
diff --git a/contrib/loaders/flash/cortex-m0.S b/contrib/loaders/flash/cortex-m0.S
index a905a362..b4416e78 100644
--- a/contrib/loaders/flash/cortex-m0.S
+++ b/contrib/loaders/flash/cortex-m0.S
@@ -27,8 +27,8 @@
 
 /* Written for NRF51822 (src/flash/nor/nrf51.c) however the NRF NVMC is
  * very generic (CPU blocks during flash writes), so this is actually
- * just a generic word-oriented copy routine for cortex-m0 (also
- * suitable for cortex m0plus/m3/m4.)
+ * just a generic word-oriented copy routine for Cortex-M0 (also
+ * suitable for Cortex-M0+/M3/M4.)
  *
  * To assemble:
  * arm-none-eabi-gcc -c cortex-m0.S
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 3e249c07..ae926970 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -995,7 +995,7 @@ For example, there may be configuration files for your JTAG adapter
 and target chip, but you need a new board-specific config file
 giving access to your particular flash chips.
 Or you might need to write another target chip configuration file
-for a new chip built around the Cortex M3 core.
+for a new chip built around the Cortex-M3 core.
 
 @quotation Note
 When you write new configuration files, please submit
@@ -5215,7 +5215,7 @@ The AVR 8-bit microcontrollers from Atmel integrate flash memory.
 
 @deffn {Flash Driver} efm32
 All members of the EFM32 microcontroller family from Energy Micro include
-internal flash and use ARM Cortex M3 cores. The driver automatically recognizes
+internal flash and use ARM Cortex-M3 cores. The driver automatically recognizes
 a number of these chips using the chip identification register, and
 autoconfigures itself.
 @example
@@ -5235,7 +5235,7 @@ supported.}
 
 @deffn {Flash Driver} fm3
 All members of the FM3 microcontroller family from Fujitsu
-include internal flash and use ARM Cortex M3 cores.
+include internal flash and use ARM Cortex-M3 cores.
 The @var{fm3} driver uses the @var{target} parameter to select the
 correct bank config, it can currently be one of the following:
 @code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu},
@@ -5267,7 +5267,7 @@ nor is Chip Erase (only Sector Erase is implemented).}
 @deffn {Flash Driver} kinetis
 @cindex kinetis
 Kx and KLx members of the Kinetis microcontroller family from Freescale include
-internal flash and use ARM Cortex M0+ or M4 cores. The driver automatically
+internal flash and use ARM Cortex-M0+ or M4 cores. The driver automatically
 recognizes flash size and a number of flash banks (1-4) using the chip
 identification register, and autoconfigures itself.
 
@@ -5325,7 +5325,7 @@ Command disables watchdog timer.
 @deffn {Flash Driver} kinetis_ke
 @cindex kinetis_ke
 KE members of the Kinetis microcontroller family from Freescale include
-internal flash and use ARM Cortex M0+. The driver automatically recognizes
+internal flash and use ARM Cortex-M0+. The driver automatically recognizes
 the KE family and sub-family using the chip identification register, and
 autoconfigures itself.
 
@@ -5686,7 +5686,7 @@ This will remove any Code Protection.
 
 @deffn {Flash Driver} psoc4
 All members of the PSoC 41xx/42xx microcontroller family from Cypress
-include internal flash and use ARM Cortex M0 cores.
+include internal flash and use ARM Cortex-M0 cores.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
 
@@ -5720,7 +5720,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 
 @deffn {Flash Driver} sim3x
 All members of the SiM3 microcontroller family from Silicon Laboratories
-include internal flash and use ARM Cortex M3 cores. It supports both JTAG
+include internal flash and use ARM Cortex-M3 cores. It supports both JTAG
 and SWD interface.
 The @var{sim3x} driver tries to probe the device to auto detect the MCU.
 If this failes, it will use the @var{size} parameter as the size of flash bank.
diff --git a/src/flash/nor/at91sam3.c b/src/flash/nor/at91sam3.c
index 9d119bbf..9782fd82 100644
--- a/src/flash/nor/at91sam3.c
+++ b/src/flash/nor/at91sam3.c
@@ -2482,7 +2482,7 @@ static const char *const eproc_names[] = {
 	_unknown,					/* 0 */
 	"arm946es",					/* 1 */
 	"arm7tdmi",					/* 2 */
-	"cortex-m3",				/* 3 */
+	"Cortex-M3",				/* 3 */
 	"arm920t",					/* 4 */
 	"arm926ejs",				/* 5 */
 	_unknown,					/* 6 */
diff --git a/src/flash/nor/at91sam4.c b/src/flash/nor/at91sam4.c
index 88ff6d7a..bcaaaa0f 100644
--- a/src/flash/nor/at91sam4.c
+++ b/src/flash/nor/at91sam4.c
@@ -1407,11 +1407,11 @@ static const char *const eproc_names[] = {
 	_unknown,					/* 0 */
 	"arm946es",					/* 1 */
 	"arm7tdmi",					/* 2 */
-	"cortex-m3",				/* 3 */
+	"Cortex-M3",				/* 3 */
 	"arm920t",					/* 4 */
 	"arm926ejs",				/* 5 */
-	"cortex-a5",				/* 6 */
-	"cortex-m4",				/* 7 */
+	"Cortex-A5",				/* 6 */
+	"Cortex-M4",				/* 7 */
 	_unknown,					/* 8 */
 	_unknown,					/* 9 */
 	_unknown,					/* 10 */
diff --git a/src/flash/nor/atsamv.c b/src/flash/nor/atsamv.c
index 08f8bb8b..77fb7e68 100644
--- a/src/flash/nor/atsamv.c
+++ b/src/flash/nor/atsamv.c
@@ -355,7 +355,7 @@ static int samv_probe(struct flash_bank *bank)
 
 	uint8_t eproc = (device_id >> 5) & 0x7;
 	if (eproc != 0) {
-		LOG_ERROR("unexpected eproc code: %d was expecting 0 (cortex-m7)", eproc);
+		LOG_ERROR("unexpected eproc code: %d was expecting 0 (Cortex-M7)", eproc);
 		return ERROR_FAIL;
 	}
 
diff --git a/src/flash/nor/efm32.c b/src/flash/nor/efm32.c
index ab543d61..5627a627 100644
--- a/src/flash/nor/efm32.c
+++ b/src/flash/nor/efm32.c
@@ -144,11 +144,11 @@ static int efm32x_read_info(struct flash_bank *bank,
 		return ret;
 
 	if (((cpuid >> 4) & 0xfff) == 0xc23) {
-		/* Cortex M3 device */
+		/* Cortex-M3 device */
 	} else if (((cpuid >> 4) & 0xfff) == 0xc24) {
-		/* Cortex M4 device(WONDER GECKO) */
+		/* Cortex-M4 device (WONDER GECKO) */
 	} else if (((cpuid >> 4) & 0xfff) == 0xc60) {
-		/* Cortex M0plus device */
+		/* Cortex-M0+ device */
 	} else {
 		LOG_ERROR("Target is not Cortex-Mx Device");
 		return ERROR_FAIL;
diff --git a/src/flash/nor/niietcm4.c b/src/flash/nor/niietcm4.c
index 9e32c010..ff72ea0f 100644
--- a/src/flash/nor/niietcm4.c
+++ b/src/flash/nor/niietcm4.c
@@ -1719,7 +1719,7 @@ static int niietcm4_auto_probe(struct flash_bank *bank)
 static int get_niietcm4_info(struct flash_bank *bank, char *buf, int buf_size)
 {
 	struct niietcm4_flash_bank *niietcm4_info = bank->driver_priv;
-	LOG_INFO("\nNIIET Cortex M4F %s\n%s", niietcm4_info->chip_name, niietcm4_info->chip_brief);
+	LOG_INFO("\nNIIET Cortex-M4F %s\n%s", niietcm4_info->chip_name, niietcm4_info->chip_brief);
 	snprintf(buf, buf_size, " ");
 
 	return ERROR_OK;
diff --git a/src/flash/nor/sim3x.c b/src/flash/nor/sim3x.c
index df4e19c2..bb1743e4 100644
--- a/src/flash/nor/sim3x.c
+++ b/src/flash/nor/sim3x.c
@@ -748,7 +748,7 @@ static int sim3x_read_info(struct flash_bank *bank)
 	}
 
 	if (((cpuid >> 4) & 0xfff) != 0xc23) {
-		LOG_ERROR("Target is not CortexM3");
+		LOG_ERROR("Target is not Cortex-M3");
 		return ERROR_FAIL;
 	}
 
@@ -1009,7 +1009,7 @@ COMMAND_HANDLER(sim3x_lock)
 			return ret;
 
 		if ((val & CPUID_CHECK_VALUE_MASK) != CPUID_CHECK_VALUE) {
-			LOG_ERROR("Target is not ARM CortexM3 or is already locked");
+			LOG_ERROR("Target is not ARM Cortex-M3 or is already locked");
 			return ERROR_FAIL;
 		}
 	} else {
diff --git a/src/jtag/drivers/openjtag.c b/src/jtag/drivers/openjtag.c
index 904ab40d..3d14f6d8 100644
--- a/src/jtag/drivers/openjtag.c
+++ b/src/jtag/drivers/openjtag.c
@@ -32,7 +32,7 @@
  ***************************************************************************/
 
 /***************************************************************************
- * Version 1.0  Tested on a MCBSTM32 board using a Cortex M3 (stm32f103x), *
+ * Version 1.0  Tested on a MCBSTM32 board using a Cortex-M3 (stm32f103x), *
  *              GDB and Eclipse under Linux (Ubuntu 10.04)                 *
  *                                                                         *
  ***************************************************************************/
diff --git a/src/jtag/drivers/stlink_usb.c b/src/jtag/drivers/stlink_usb.c
index 649368d0..bbd31d87 100644
--- a/src/jtag/drivers/stlink_usb.c
+++ b/src/jtag/drivers/stlink_usb.c
@@ -1164,7 +1164,7 @@ static int stlink_usb_step(void *handle)
 
 	if (h->jtag_api == STLINK_JTAG_API_V2) {
 		/* TODO: this emulates the v1 api, it should really use a similar auto mask isr
-		 * that the cortex-m3 currently does. */
+		 * that the Cortex-M3 currently does. */
 		stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN);
 		stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_STEP|C_MASKINTS|C_DEBUGEN);
 		return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN);
diff --git a/src/rtos/ChibiOS.c b/src/rtos/ChibiOS.c
index 84393860..be91be5f 100644
--- a/src/rtos/ChibiOS.c
+++ b/src/rtos/ChibiOS.c
@@ -226,7 +226,7 @@ static int ChibiOS_update_stacking(struct rtos *rtos)
 	/* Sometimes the stacking can not be determined only by looking at the
 	 * target name but only a runtime.
 	 *
-	 * For example, this is the case for cortex-m4 targets and ChibiOS which
+	 * For example, this is the case for Cortex-M4 targets and ChibiOS which
 	 * only stack the FPU registers if it is enabled during ChibiOS build.
 	 *
 	 * Terminating which stacking is used is target depending.
@@ -248,7 +248,7 @@ static int ChibiOS_update_stacking(struct rtos *rtos)
 	struct ChibiOS_params *param;
 	param = (struct ChibiOS_params *) rtos->rtos_specific_params;
 
-	/* Check for armv7m with *enabled* FPU, i.e. a Cortex M4  */
+	/* Check for armv7m with *enabled* FPU, i.e. a Cortex-M4  */
 	struct armv7m_common *armv7m_target = target_to_armv7m(rtos->target);
 	if (is_armv7m(armv7m_target)) {
 		if (armv7m_target->fp_feature == FPv4_SP) {
diff --git a/src/rtos/FreeRTOS.c b/src/rtos/FreeRTOS.c
index 93137733..a58eed13 100644
--- a/src/rtos/FreeRTOS.c
+++ b/src/rtos/FreeRTOS.c
@@ -430,7 +430,7 @@ static int FreeRTOS_get_thread_reg_list(struct rtos *rtos, int64_t thread_id, ch
 										thread_id + param->thread_stack_offset,
 										stack_ptr);
 
-	/* Check for armv7m with *enabled* FPU, i.e. a Cortex M4F */
+	/* Check for armv7m with *enabled* FPU, i.e. a Cortex-M4F */
 	int cm4_fpu_enabled = 0;
 	struct armv7m_common *armv7m_target = target_to_armv7m(rtos->target);
 	if (is_armv7m(armv7m_target)) {
diff --git a/src/rtos/mqx.c b/src/rtos/mqx.c
index 272658c8..f0f419c6 100644
--- a/src/rtos/mqx.c
+++ b/src/rtos/mqx.c
@@ -109,7 +109,7 @@ static int mqx_valid_address_check(
 	enum mqx_arch arch_type = ((struct mqx_params *)rtos->rtos_specific_params)->target_arch;
 	const char * targetname = ((struct mqx_params *)rtos->rtos_specific_params)->target_name;
 
-	/* Cortex M address range */
+	/* Cortex-M address range */
 	if (arch_type == mqx_arch_cortexm) {
 		if (
 			/* code and sram area */
diff --git a/src/rtos/rtos_standard_stackings.c b/src/rtos/rtos_standard_stackings.c
index 7d72b4e2..32f82a91 100644
--- a/src/rtos/rtos_standard_stackings.c
+++ b/src/rtos/rtos_standard_stackings.c
@@ -182,7 +182,7 @@ int64_t rtos_generic_stack_align8(struct target *target,
 			stacking, stack_ptr, 8);
 }
 
-/* The Cortex M3 will indicate that an alignment adjustment
+/* The Cortex-M3 will indicate that an alignment adjustment
  * has been done on the stack by setting bit 9 of the stacked xPSR
  * register.  In this case, we can just add an extra 4 bytes to get
  * to the program stack.  Note that some places in the ARM documentation
diff --git a/src/target/armv7a.c b/src/target/armv7a.c
index b9320d14..6dbe10d7 100644
--- a/src/target/armv7a.c
+++ b/src/target/armv7a.c
@@ -177,7 +177,7 @@ done:
 	return retval;
 }
 
-/*  method adapted to cortex A : reused arm v4 v5 method*/
+/*  method adapted to Cortex-A : reused ARM v4 v5 method */
 int armv7a_mmu_translate_va(struct target *target,  uint32_t va, uint32_t *val)
 {
 	uint32_t first_lvl_descriptor = 0x0;
diff --git a/src/target/cortex_a.c b/src/target/cortex_a.c
index a97e594e..b345dfc0 100644
--- a/src/target/cortex_a.c
+++ b/src/target/cortex_a.c
@@ -18,7 +18,7 @@
  *   michel.jaouen@stericsson.com : smp minimum support                    *
  *                                                                         *
  *   Copyright (C) Broadcom 2012                                           *
- *   ehunter@broadcom.com : Cortex R4 support                              *
+ *   ehunter@broadcom.com : Cortex-R4 support                              *
  *                                                                         *
  *   Copyright (C) 2013 Kamal Dasu                                         *
  *   kdasu.kdev@gmail.com                                                  *
@@ -2664,7 +2664,7 @@ out:
 /*
  * Cortex-A Memory access
  *
- * This is same Cortex M3 but we must also use the correct
+ * This is same Cortex-M3 but we must also use the correct
  * ap number for every access.
  */
 
diff --git a/src/target/cortex_m.c b/src/target/cortex_m.c
index 32b46d34..29f0cdd0 100644
--- a/src/target/cortex_m.c
+++ b/src/target/cortex_m.c
@@ -1932,7 +1932,7 @@ int cortex_m_examine(struct target *target)
 		}
 		LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
 
-		/* test for floating point feature on cortex-m4 */
+		/* test for floating point feature on Cortex-M4 */
 		if (i == 4) {
 			target_read_u32(target, MVFR0, &mvfr0);
 			target_read_u32(target, MVFR1, &mvfr1);
diff --git a/tcl/target/altera_fpgasoc.cfg b/tcl/target/altera_fpgasoc.cfg
index fccf8c51..25fe1f49 100644
--- a/tcl/target/altera_fpgasoc.cfg
+++ b/tcl/target/altera_fpgasoc.cfg
@@ -27,7 +27,7 @@ jtag newtap $_CHIPNAME.fpga tap -irlen 10 -ircapture 0x01 -irmask 0x3 -expected-
 
 
 #
-# Cortex A9 target
+# Cortex-A9 target
 #
 
 # GDB target: Cortex-A9, using DAP, configuring only one core
@@ -59,6 +59,6 @@ $_TARGETNAME1 configure -event gdb-attach { halt }
 #$_TARGETNAME2 configure -event gdb-attach { halt }
 
 proc cycv_dbginit {target} {
-        # General Cortex A8/A9 debug initialisation
+        # General Cortex-A8/A9 debug initialisation
         cortex_a dbginit
 }
diff --git a/tcl/target/am335x.cfg b/tcl/target/am335x.cfg
index ce7cfb6d..74096151 100644
--- a/tcl/target/am335x.cfg
+++ b/tcl/target/am335x.cfg
@@ -63,13 +63,13 @@ proc enable_default_taps { taps } {
 }
 
 #
-# Cortex M3 target
+# Cortex-M3 target
 #
 set _TARGETNAME_2 $_CHIPNAME.m3
 target create $_TARGETNAME_2 cortex_m -chain-position $_CHIPNAME.m3_dap
 
 #
-# Cortex A8 target
+# Cortex-A8 target
 #
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -dbgbase 0x80001000
diff --git a/tcl/target/am437x.cfg b/tcl/target/am437x.cfg
index 4f97f812..fe0ffff2 100644
--- a/tcl/target/am437x.cfg
+++ b/tcl/target/am437x.cfg
@@ -484,7 +484,7 @@ jtag configure $JRC_NAME -event setup "jtag tapenable $DEBUGSS_NAME"
 jtag configure $JRC_NAME -event post-reset "runtest 100"
 
 #
-# Cortex A9 target
+# Cortex-A9 target
 #
 target create $_TARGETNAME cortex_a -chain-position $DEBUGSS_NAME -coreid 0 -dbgbase 0x80000000
 
diff --git a/tcl/target/amdm37x.cfg b/tcl/target/amdm37x.cfg
index 59fbbf01..c00dae92 100644
--- a/tcl/target/amdm37x.cfg
+++ b/tcl/target/amdm37x.cfg
@@ -199,7 +199,7 @@ $_TARGETNAME configure -event gdb-attach {
 # Run this to enable invasive debugging.  This is run automatically in the
 # reset sequence.
 proc amdm37x_dbginit {target} {
-   # General Cortex A8 debug initialisation
+   # General Cortex-A8 debug initialisation
    cortex_a dbginit
 
    # Enable DBGEN signal.  This signal is described in the ARM v7 TRM, but
diff --git a/tcl/target/at91sam3XXX.cfg b/tcl/target/at91sam3XXX.cfg
index 6af1f5cc..fca655d2 100644
--- a/tcl/target/at91sam3XXX.cfg
+++ b/tcl/target/at91sam3XXX.cfg
@@ -1,4 +1,4 @@
-# script for ATMEL sam3, a CORTEX-M3 chip
+# script for ATMEL sam3, a Cortex-M3 chip
 #
 # at91sam3u4e
 # at91sam3u2e
diff --git a/tcl/target/at91sam3ax_xx.cfg b/tcl/target/at91sam3ax_xx.cfg
index 8e6bc337..e5617712 100644
--- a/tcl/target/at91sam3ax_xx.cfg
+++ b/tcl/target/at91sam3ax_xx.cfg
@@ -1,4 +1,4 @@
-# script for ATMEL sam3, a CORTEX-M3 chip
+# script for ATMEL sam3, a Cortex-M3 chip
 #
 # at91sam3A4C
 # at91sam3A8C
diff --git a/tcl/target/at91sam3sXX.cfg b/tcl/target/at91sam3sXX.cfg
index ca7092b7..09146bd0 100644
--- a/tcl/target/at91sam3sXX.cfg
+++ b/tcl/target/at91sam3sXX.cfg
@@ -1,4 +1,4 @@
-# script for ATMEL sam3, a CORTEX-M3 chip
+# script for ATMEL sam3, a Cortex-M3 chip
 #
 # at91sam3s4c
 # at91sam3s4b
diff --git a/tcl/target/at91sam3uxx.cfg b/tcl/target/at91sam3uxx.cfg
index a11afc0b..b42ae19c 100644
--- a/tcl/target/at91sam3uxx.cfg
+++ b/tcl/target/at91sam3uxx.cfg
@@ -1,4 +1,4 @@
-# script for ATMEL sam3, a CORTEX-M3 chip
+# script for ATMEL sam3, a Cortex-M3 chip
 #
 # at91sam3u4e
 # at91sam3u2e
diff --git a/tcl/target/at91sam4XXX.cfg b/tcl/target/at91sam4XXX.cfg
index 8f32ca0b..ca801431 100644
--- a/tcl/target/at91sam4XXX.cfg
+++ b/tcl/target/at91sam4XXX.cfg
@@ -1,5 +1,5 @@
 #
-# script for ATMEL sam4, a CORTEX-M4 chip
+# script for ATMEL sam4, a Cortex-M4 chip
 #
 
 #
diff --git a/tcl/target/at91sam4lXX.cfg b/tcl/target/at91sam4lXX.cfg
index 46c38aef..4aee7d08 100644
--- a/tcl/target/at91sam4lXX.cfg
+++ b/tcl/target/at91sam4lXX.cfg
@@ -1,4 +1,4 @@
-# script for ATMEL sam4l, a CORTEX-M4 chip
+# script for ATMEL sam4l, a Cortex-M4 chip
 #
 
 source [find target/at91sam4XXX.cfg]
diff --git a/tcl/target/at91sam4sXX.cfg b/tcl/target/at91sam4sXX.cfg
index 3de4aa85..8883e23c 100644
--- a/tcl/target/at91sam4sXX.cfg
+++ b/tcl/target/at91sam4sXX.cfg
@@ -1,4 +1,4 @@
-# script for ATMEL sam4, a CORTEX-M4 chip
+# script for ATMEL sam4, a Cortex-M4 chip
 #
 
 source [find target/at91sam4XXX.cfg]
diff --git a/tcl/target/at91sam4sd32x.cfg b/tcl/target/at91sam4sd32x.cfg
index e44db66e..077b1f51 100644
--- a/tcl/target/at91sam4sd32x.cfg
+++ b/tcl/target/at91sam4sd32x.cfg
@@ -1,4 +1,4 @@
-# script for ATMEL sam4sd32, a CORTEX-M4 chip
+# script for ATMEL sam4sd32, a Cortex-M4 chip
 #
 
 source [find target/at91sam4XXX.cfg]
diff --git a/tcl/target/at91samdXX.cfg b/tcl/target/at91samdXX.cfg
index 50d93f59..47b4f5f1 100644
--- a/tcl/target/at91samdXX.cfg
+++ b/tcl/target/at91samdXX.cfg
@@ -1,5 +1,5 @@
 #
-# script for Atmel SAMD, SAMR, SAML or SAMC, a CORTEX-M0 chip
+# script for Atmel SAMD, SAMR, SAML or SAMC, a Cortex-M0 chip
 #
 
 #
diff --git a/tcl/target/at91samg5x.cfg b/tcl/target/at91samg5x.cfg
index d26455b0..57274c0c 100644
--- a/tcl/target/at91samg5x.cfg
+++ b/tcl/target/at91samg5x.cfg
@@ -1,4 +1,4 @@
-# script for the ATMEL samg5x CORTEX-M4F chip family
+# script for the ATMEL samg5x Cortex-M4F chip family
 #
 
 source [find target/at91sam4XXX.cfg]
diff --git a/tcl/target/bcm281xx.cfg b/tcl/target/bcm281xx.cfg
index c05682f8..224af793 100644
--- a/tcl/target/bcm281xx.cfg
+++ b/tcl/target/bcm281xx.cfg
@@ -17,7 +17,7 @@ if { [info exists DAP_TAPID] } {
 jtag newtap $_CHIPNAME dap -expected-id $_DAP_TAPID -irlen 4
 
 
-# Dual Cortex A9s
+# Dual Cortex-A9
 set _TARGETNAME0 $_CHIPNAME.cpu0
 set _TARGETNAME1 $_CHIPNAME.cpu1
 
diff --git a/tcl/target/cc26xx.cfg b/tcl/target/cc26xx.cfg
index 0fa46003..1492e6a2 100755
--- a/tcl/target/cc26xx.cfg
+++ b/tcl/target/cc26xx.cfg
@@ -37,7 +37,7 @@ jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
 jtag configure $_CHIPNAME.jrc -event post-reset "ti_cjtag_to_4pin_jtag $_CHIPNAME.jrc"
 
 #
-# Cortex M3 target
+# Cortex-M3 target
 #
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.dap
diff --git a/tcl/target/cc32xx.cfg b/tcl/target/cc32xx.cfg
index ff654502..154bf910 100755
--- a/tcl/target/cc32xx.cfg
+++ b/tcl/target/cc32xx.cfg
@@ -47,7 +47,7 @@ if {[using_jtag]} {
 }
 
 #
-# Cortex M3 target
+# Cortex-M3 target
 #
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.dap
diff --git a/tcl/target/fm3.cfg b/tcl/target/fm3.cfg
index e2d78d1e..78bbc945 100644
--- a/tcl/target/fm3.cfg
+++ b/tcl/target/fm3.cfg
@@ -27,7 +27,7 @@ if {[using_jtag]} {
    jtag_ntrst_delay 100
 }
 
-# Fujitsu cortex-M3 reset configuration
+# Fujitsu Cortex-M3 reset configuration
 reset_config trst_only
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
diff --git a/tcl/target/imx51.cfg b/tcl/target/imx51.cfg
index 15d5c048..b143aad2 100644
--- a/tcl/target/imx51.cfg
+++ b/tcl/target/imx51.cfg
@@ -40,7 +40,7 @@ jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
 jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
 
 proc imx51_dbginit {target} {
-     # General Cortex A8 debug initialisation
+     # General Cortex-A8 debug initialisation
      cortex_a dbginit
 }
 
diff --git a/tcl/target/imx53.cfg b/tcl/target/imx53.cfg
index e77bc340..87a3008e 100644
--- a/tcl/target/imx53.cfg
+++ b/tcl/target/imx53.cfg
@@ -40,7 +40,7 @@ jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
 jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
 
 proc imx53_dbginit {target} {
-     # General Cortex A8 debug initialisation
+     # General Cortex-A8 debug initialisation
      cortex_a dbginit
 }
 
diff --git a/tcl/target/imx6.cfg b/tcl/target/imx6.cfg
index 11c2134c..4f7e98af 100644
--- a/tcl/target/imx6.cfg
+++ b/tcl/target/imx6.cfg
@@ -47,7 +47,7 @@ target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap \
 jtag configure $_CHIPNAME.sjc -event post-reset "runtest 100"
 
 proc imx6_dbginit {target} {
-        # General Cortex A8/A9 debug initialisation
+        # General Cortex-A8/A9 debug initialisation
         cortex_a dbginit
 }
 
diff --git a/tcl/target/lpc1xxx.cfg b/tcl/target/lpc1xxx.cfg
index 226425d4..9c10e9f9 100644
--- a/tcl/target/lpc1xxx.cfg
+++ b/tcl/target/lpc1xxx.cfg
@@ -56,7 +56,7 @@ if { [info exists CPUTAPID] } {
 	# Allow user override
 	set _CPUTAPID $CPUTAPID
 } else {
-	# LPC8xx/LPC11xx/LPC12xx use a Cortex M0/M0+ core, LPC13xx/LPC17xx use a Cortex M3 core,LPC40xx use a Cortex-M4F core.
+	# LPC8xx/LPC11xx/LPC12xx use a Cortex-M0/M0+ core, LPC13xx/LPC17xx use a Cortex-M3 core, LPC40xx use a Cortex-M4F core.
 	if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" } {
 		set _CPUTAPID 0x0bb11477
 	} elseif { $_CHIPSERIES == "lpc1300" || $_CHIPSERIES == "lpc1700" || $_CHIPSERIES == "lpc4000" } {
@@ -148,10 +148,10 @@ if {[using_jtag]} {
  jtag_ntrst_delay 200
 }
 
-# LPC8xx (Cortex M0+ core) support SYSRESETREQ
-# LPC11xx/LPC12xx (Cortex M0 core) support SYSRESETREQ
-# LPC13xx/LPC17xx (Cortex M3 core) support SYSRESETREQ
-# LPC40xx (Cortex M4F core) support SYSRESETREQ
+# LPC8xx (Cortex-M0+ core) support SYSRESETREQ
+# LPC11xx/LPC12xx (Cortex-M0 core) support SYSRESETREQ
+# LPC13xx/LPC17xx (Cortex-M3 core) support SYSRESETREQ
+# LPC40xx (Cortex-M4F core) support SYSRESETREQ
 if {![using_hla]} {
     # if srst is not fitted use SYSRESETREQ to
     # perform a soft reset
diff --git a/tcl/target/nrf51.cfg b/tcl/target/nrf51.cfg
index 07681206..280dd4ff 100644
--- a/tcl/target/nrf51.cfg
+++ b/tcl/target/nrf51.cfg
@@ -1,5 +1,5 @@
 #
-# script for Nordic nRF51 series, a CORTEX-M0 chip
+# script for Nordic nRF51 series, a Cortex-M0 chip
 #
 
 source [find target/swj-dp.tcl]
diff --git a/tcl/target/omap3530.cfg b/tcl/target/omap3530.cfg
index f9dcf7cb..c2929d1c 100644
--- a/tcl/target/omap3530.cfg
+++ b/tcl/target/omap3530.cfg
@@ -53,7 +53,7 @@ jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"
 jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
 
 proc omap3_dbginit {target} {
-     # General Cortex A8 debug initialisation
+     # General Cortex-A8 debug initialisation
      cortex_a dbginit
      # Enable DBGU signal for OMAP353x
      $target mww phys 0x5401d030 0x00002000
diff --git a/tcl/target/stm32w108xx.cfg b/tcl/target/stm32w108xx.cfg
index 1a191354..d07afc41 100644
--- a/tcl/target/stm32w108xx.cfg
+++ b/tcl/target/stm32w108xx.cfg
@@ -1,7 +1,7 @@
 #
 # Target configuration for the ST STM32W108xx chips
 #
-# Processor: ARM Cortex M3
+# Processor: ARM Cortex-M3
 # Date:      2013-06-09
 # Author:    Giuseppe Barba <giuseppe.barba@gmail.com>
 
diff --git a/tcl/target/ti_tms570.cfg b/tcl/target/ti_tms570.cfg
index 582a4bfa..21da6c01 100644
--- a/tcl/target/ti_tms570.cfg
+++ b/tcl/target/ti_tms570.cfg
@@ -53,7 +53,7 @@ jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
 jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
 jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"
 
-# Cortex R4 target
+# Cortex-R4 target
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_r4 -endian $_ENDIAN \
 	-chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x00001003