From: Heiko Schocher Date: Thu, 6 Jan 2011 09:25:26 +0000 (+0100) Subject: keymile boards: add CONFIG_PIGGY_MAC_ADRESS_OFFSET X-Git-Tag: v2011.06-rc1~100 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=0d01520200f3bb0686567134bc2e7bb940009559;p=u-boot keymile boards: add CONFIG_PIGGY_MAC_ADRESS_OFFSET Normaly the PIGGY_MAC_ADRESS can be read directly from the IVM on keymile boards. On mgcoge3 it differs. Because there are two piggy boards deployed the second MAC adress must be calculated with the IVM mac adress and an offset. This patch allows to set such a offset in the board config. Signed-off-by: Holger Brunck cc: Valentin Longchamp cc: Heiko Schocher --- diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 6600e08711..8392a6413e 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -228,8 +228,21 @@ static int ivm_analyze_block2(unsigned char *buf, int len) /* IVM_MacAddress */ sprintf((char *)valbuf, "%pM", buf); ivm_set_value("IVM_MacAddress", (char *)valbuf); + /* if an offset is defined, add it */ +#if defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET) + if (CONFIG_PIGGY_MAC_ADRESS_OFFSET > 0) { + unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6]; + + val += CONFIG_PIGGY_MAC_ADRESS_OFFSET; + buf[4] = (val >> 16) & 0xff; + buf[5] = (val >> 8) & 0xff; + buf[6] = val & 0xff; + sprintf((char *)valbuf, "%pM", buf); + } +#endif if (getenv("ethaddr") == NULL) setenv((char *)"ethaddr", (char *)valbuf); + /* IVM_MacCount */ count = (buf[10] << 24) + (buf[11] << 16) + diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h index 8497ab63d1..e32de8d9fa 100644 --- a/board/keymile/common/common.h +++ b/board/keymile/common/common.h @@ -39,6 +39,10 @@ struct km_bec_fpga { unsigned char pgy_eth; }; +#if !defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET) +#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 0 +#endif + int ethernet_present(void); int ivm_read_eeprom(void);