From: Masahiro Yamada Date: Wed, 2 Sep 2015 01:40:22 +0000 (+0900) Subject: powerpc: ppc4xx: remove alpr support X-Git-Tag: v2015.10-rc3~18 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=0d2fc81133aa9e8f19d16de48d4f0a8f1bdde025;p=u-boot powerpc: ppc4xx: remove alpr support This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada Cc: Stefan Roese --- diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index 10b86e058a..e8c0ca068d 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -140,9 +140,6 @@ config TARGET_MIP405 config TARGET_PIP405 bool "Support PIP405" -config TARGET_ALPR - bool "Support alpr" - config TARGET_P3P440 bool "Support p3p440" @@ -197,7 +194,6 @@ source "board/mosaixtech/icon/Kconfig" source "board/mpl/mip405/Kconfig" source "board/mpl/pip405/Kconfig" source "board/pcs440ep/Kconfig" -source "board/prodrive/alpr/Kconfig" source "board/prodrive/p3p440/Kconfig" source "board/sbc405/Kconfig" source "board/t3corp/Kconfig" diff --git a/board/prodrive/alpr/Kconfig b/board/prodrive/alpr/Kconfig deleted file mode 100644 index 543b4557ee..0000000000 --- a/board/prodrive/alpr/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ALPR - -config SYS_BOARD - default "alpr" - -config SYS_VENDOR - default "prodrive" - -config SYS_CONFIG_NAME - default "alpr" - -endif diff --git a/board/prodrive/alpr/MAINTAINERS b/board/prodrive/alpr/MAINTAINERS deleted file mode 100644 index 31baabb67e..0000000000 --- a/board/prodrive/alpr/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ALPR BOARD -M: Stefan Roese -S: Maintained -F: board/prodrive/alpr/ -F: include/configs/alpr.h -F: configs/alpr_defconfig diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile deleted file mode 100644 index 812d041ef2..0000000000 --- a/board/prodrive/alpr/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = alpr.o fpga.o nand.o -extra-y += init.o diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c deleted file mode 100644 index 31c1ab5d0f..0000000000 --- a/board/prodrive/alpr/alpr.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -extern int alpr_fpga_init(void); - -int board_early_init_f (void) -{ - /*------------------------------------------------------------------------- - * Initialize EBC CONFIG - *-------------------------------------------------------------------------*/ - mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | - EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK | - EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | - EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | - EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - /* - * Because of the interrupt handling rework to handle 440GX interrupts - * with the common code, we needed to change names of the UIC registers. - * Here the new relationship: - * - * U-Boot name 440GX name - * ----------------------- - * UIC0 UICB0 - * UIC1 UIC0 - * UIC2 UIC1 - * UIC3 UIC2 - */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (UIC1ER, 0x00000000); /* disable all */ - mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr (UIC1PR, 0xfffffe03); /* per manual */ - mtdcr (UIC1TR, 0x01c00000); /* per manual */ - mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (UIC2ER, 0x00000000); /* disable all */ - mtdcr (UIC2CR, 0x00000000); /* all non-critical */ - mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */ - mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */ - mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (UIC3ER, 0x00000000); /* disable all */ - mtdcr (UIC3CR, 0x00000000); /* all non-critical */ - mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */ - mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */ - mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - - mtdcr (UIC0SR, 0xfc000000); /* clear all */ - mtdcr (UIC0ER, 0x00000000); /* disable all */ - mtdcr (UIC0CR, 0x00000000); /* all non-critical */ - mtdcr (UIC0PR, 0xfc000000); /* */ - mtdcr (UIC0TR, 0x00000000); /* */ - mtdcr (UIC0VR, 0x00000001); /* */ - - /* Setup shutdown/SSD empty interrupt as inputs */ - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY)); - out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY)); - - /* Setup GPIO/IRQ multiplexing */ - mtsdr(SDR0_PFC0, 0x01a33e00); - - return 0; -} - -int last_stage_init(void) -{ - unsigned short reg; - - /* - * Configure LED's of both Marvell 88E1111 PHY's - * - * This has to be done after the 4xx ethernet driver is loaded, - * so "last_stage_init()" is the right place. - */ - miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, ®); - reg |= 0x0001; - miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg); - miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, ®); - reg |= 0x0001; - miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg); - - return 0; -} - -static int board_rev(void) -{ - /* Setup as input */ - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CONFIG_SYS_GPIO_REV0 | CONFIG_SYS_GPIO_REV1)); - out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CONFIG_SYS_GPIO_REV0 | CONFIG_SYS_GPIO_REV1)); - - return (in32(GPIO0_IR) >> 16) & 0x3; -} - -int checkboard (void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - printf ("Board: ALPR"); - if (i > 0) { - puts(", serial# "); - puts(buf); - } - printf(" (Rev. %d)\n", board_rev()); - - return (0); -} - -#if defined(CONFIG_PCI) -/* - * Override weak pci_pre_init() - */ -int pci_pre_init(struct pci_controller *hose) -{ - if (__pci_pre_init(hose) == 0) - return 0; - - /* FPGA Init */ - alpr_fpga_init(); - - return 1; -} - -/************************************************************************* - * Override weak is_pci_host() - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -static void wait_for_pci_ready(void) -{ - /* - * Configure EREADY as input - */ - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CONFIG_SYS_GPIO_EREADY); - udelay(1000); - - for (;;) { - if (in32(GPIO0_IR) & CONFIG_SYS_GPIO_EREADY) - return; - } - -} - -int is_pci_host(struct pci_controller *hose) -{ - wait_for_pci_ready(); - return 1; /* return 1 for host controller */ -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - | PowerPC440 PCI Master configuration. - | Map PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r( PCIL0_POM0SA, 0 ); /* disable */ - out32r( PCIL0_POM1SA, 0 ); /* disable */ - out32r( PCIL0_POM2SA, 0 ); /* disable */ - - out32r(PCIL0_POM0LAL, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_POM0LAH, 0x00000003); /* PMM0 Local Address */ - out32r(PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ - - out32r(PCIL0_POM1LAL, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_POM1LAH, 0x00000003); /* PMM0 Local Address */ - out32r(PCIL0_POM1PCIAL, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ diff --git a/board/prodrive/alpr/config.mk b/board/prodrive/alpr/config.mk deleted file mode 100644 index 0ccb2e669c..0000000000 --- a/board/prodrive/alpr/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c deleted file mode 100644 index 3133f94273..0000000000 --- a/board/prodrive/alpr/fpga.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * (C) Copyright 2006 - * Heiko Schocher, DENX Software Engineering, hs@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Altera FPGA configuration support for the ALPR computer from prodrive - */ - -#include -#include -#include -#include -#include -#include -#include "fpga.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_FPGA) - -#ifdef FPGA_DEBUG -#define PRINTF(fmt, args...) printf(fmt , ##args) -#else -#define PRINTF(fmt, args...) -#endif - -static unsigned long regval; - -#define SET_GPIO_REG_0(reg, bit) do { \ - regval = in32(reg); \ - regval &= ~(0x80000000 >> bit); \ - out32(reg, regval); \ - } while (0) - -#define SET_GPIO_REG_1(reg, bit) do { \ - regval = in32(reg); \ - regval |= (0x80000000 >> bit); \ - out32(reg, regval); \ - } while (0) - -#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit) -#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit) - -#define FPGA_PRG (0x80000000 >> CONFIG_SYS_GPIO_PROG_EN) -#define FPGA_CONFIG (0x80000000 >> CONFIG_SYS_GPIO_CONFIG) -#define FPGA_DATA (0x80000000 >> CONFIG_SYS_GPIO_DATA) -#define FPGA_CLK (0x80000000 >> CONFIG_SYS_GPIO_CLK) -#define OLD_VAL (FPGA_PRG | FPGA_CONFIG) - -#define SET_FPGA(data) out32(GPIO0_OR, data) - -#define FPGA_WRITE_1 do { \ - SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \ - SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA); /* set data to 1 */ \ -} while (0) - -#define FPGA_WRITE_0 do { \ - SET_FPGA(OLD_VAL | 0 | 0); /* set data to 0 */ \ - SET_FPGA(OLD_VAL | FPGA_CLK | 0); /* set data to 1 */ \ -} while (0) - -/* Plattforminitializations */ -/* Here we have to set the FPGA Chain */ -/* PROGRAM_PROG_EN = HIGH */ -/* PROGRAM_SEL_DPR = LOW */ -int fpga_pre_fn(int cookie) -{ - /* Enable the FPGA Chain */ - SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_PROG_EN); - SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_PROG_EN); - SET_GPIO_1(CONFIG_SYS_GPIO_PROG_EN); - SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_SEL_DPR); - SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_SEL_DPR); - SET_GPIO_0((CONFIG_SYS_GPIO_SEL_DPR)); - - /* initialize the GPIO Pins */ - /* output */ - SET_GPIO_0(CONFIG_SYS_GPIO_CLK); - SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_CLK); - SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CLK); - - /* output */ - SET_GPIO_0(CONFIG_SYS_GPIO_DATA); - SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_DATA); - SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_DATA); - - /* First we set STATUS to 0 then as an input */ - SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_STATUS); - SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_STATUS); - SET_GPIO_0(CONFIG_SYS_GPIO_STATUS); - SET_GPIO_REG_0(GPIO0_TCR, CONFIG_SYS_GPIO_STATUS); - SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_STATUS); - - /* output */ - SET_GPIO_REG_1(GPIO0_TCR, CONFIG_SYS_GPIO_CONFIG); - SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CONFIG); - SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG); - - /* input */ - SET_GPIO_0(CONFIG_SYS_GPIO_CON_DON); - SET_GPIO_REG_0(GPIO0_TCR, CONFIG_SYS_GPIO_CON_DON); - SET_GPIO_REG_0(GPIO0_ODR, CONFIG_SYS_GPIO_CON_DON); - - /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */ - SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG); - return FPGA_SUCCESS; -} - -/* Set the state of CONFIG Pin */ -int fpga_config_fn(int assert_config, int flush, int cookie) -{ - if (assert_config) - SET_GPIO_1(CONFIG_SYS_GPIO_CONFIG); - else - SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG); - - return FPGA_SUCCESS; -} - -/* Returns the state of STATUS Pin */ -int fpga_status_fn(int cookie) -{ - unsigned long reg; - - reg = in32(GPIO0_IR); - if (reg & (0x80000000 >> CONFIG_SYS_GPIO_STATUS)) { - PRINTF("STATUS = HIGH\n"); - return FPGA_FAIL; - } - PRINTF("STATUS = LOW\n"); - return FPGA_SUCCESS; -} - -/* Returns the state of CONF_DONE Pin */ -int fpga_done_fn(int cookie) -{ - unsigned long reg; - reg = in32(GPIO0_IR); - if (reg & (0x80000000 >> CONFIG_SYS_GPIO_CON_DON)) { - PRINTF("CONF_DON = HIGH\n"); - return FPGA_FAIL; - } - PRINTF("CONF_DON = LOW\n"); - return FPGA_SUCCESS; -} - -/* writes the complete buffer to the FPGA - writing the complete buffer in one function is much faster, - then calling it for every bit */ -int fpga_write_fn(const void *buf, size_t len, int flush, int cookie) -{ - size_t bytecount = 0; - unsigned char *data = (unsigned char *) buf; - unsigned char val = 0; - int i; - int len_40 = len / 40; - - while (bytecount < len) { - val = data[bytecount++]; - i = 8; - do { - if (val & 0x01) - FPGA_WRITE_1; - else - FPGA_WRITE_0; - - val >>= 1; - i--; - } while (i > 0); - -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK - if (bytecount % len_40 == 0) { - putc('.'); /* let them know we are alive */ -#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC - if (ctrlc()) - return FPGA_FAIL; -#endif - } -#endif - } - return FPGA_SUCCESS; -} - -/* called, when programming is aborted */ -int fpga_abort_fn(int cookie) -{ - SET_GPIO_1((CONFIG_SYS_GPIO_SEL_DPR)); - return FPGA_SUCCESS; -} - -/* called, when programming was succesful */ -int fpga_post_fn(int cookie) -{ - return fpga_abort_fn(cookie); -} - -/* Note that these are pointers to code that is in Flash. They will be - * relocated at runtime. - */ -Altera_CYC2_Passive_Serial_fns fpga_fns = { - fpga_pre_fn, - fpga_config_fn, - fpga_status_fn, - fpga_done_fn, - fpga_write_fn, - fpga_abort_fn, - fpga_post_fn -}; - -Altera_desc fpga[CONFIG_FPGA_COUNT] = { - {Altera_CYC2, - passive_serial, - Altera_EP2C35_SIZE, - (void *) &fpga_fns, - NULL, - 0} -}; - -/* - * Initialize the fpga. Return 1 on success, 0 on failure. - */ -int alpr_fpga_init(void) -{ - int i; - - PRINTF("%s:%d: Initialize FPGA interface\n", __func__, __LINE__); - fpga_init(); - - for (i = 0; i < CONFIG_FPGA_COUNT; i++) { - PRINTF("%s:%d: Adding fpga %d\n", __func__, __LINE__, i); - fpga_add(fpga_altera, &fpga[i]); - } - return 1; -} - -#endif diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S deleted file mode 100644 index 7ff7a59170..0000000000 --- a/board/prodrive/alpr/init.S +++ /dev/null @@ -1,53 +0,0 @@ -/* - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - tlbentry(0xff000000, SZ_16M, 0xff000000, 1, AC_RWX | SA_IG ) - tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX) - tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX) -#ifdef CONFIG_4xx_DCACHE - tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_G) -#else - tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG) -#endif - -#ifdef CONFIG_SYS_INIT_RAM_DCACHE - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G) -#endif - tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG) - - /* PCI */ - tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 3, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 3, AC_RW | SA_IG) - tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 3, AC_RW | SA_IG) - - /* NAND */ - tlbentry(CONFIG_SYS_NAND_BASE, SZ_4K, CONFIG_SYS_NAND_BASE, 1, AC_RWX | SA_IG) - tlbtab_end diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c deleted file mode 100644 index ca40cea9ad..0000000000 --- a/board/prodrive/alpr/nand.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2006 - * Heiko Schocher, DENX Software Engineering, hs@denx.de - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#if defined(CONFIG_CMD_NAND) - -#include -#include - -struct alpr_ndfc_regs { - u8 cmd[4]; - u8 addr_wait; - u8 term; - u8 dummy; - u8 dummy2; - u8 data; -}; - -static u8 hwctl; -static struct alpr_ndfc_regs *alpr_ndfc = NULL; - -#define readb(addr) (u8)(*(volatile u8 *)(addr)) -#define writeb(d,addr) *(volatile u8 *)(addr) = ((u8)(d)) - -/* - * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to - * the NAND devices. The NDFC has command, address and data registers that - * when accessed will set up the NAND flash pins appropriately. We'll use the - * hwcontrol function to save the configuration in a global variable. - * We can then use this information in the read and write functions to - * determine which NDFC register to access. - * - * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte). - */ -static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - if ( ctrl & NAND_CLE ) - hwctl |= 0x1; - else - hwctl &= ~0x1; - if ( ctrl & NAND_ALE ) - hwctl |= 0x2; - else - hwctl &= ~0x2; - if ( (ctrl & NAND_NCE) != NAND_NCE) - writeb(0x00, &(alpr_ndfc->term)); - } - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static u_char alpr_nand_read_byte(struct mtd_info *mtd) -{ - return readb(&(alpr_ndfc->data)); -} - -static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - struct nand_chip *nand = mtd->priv; - int i; - - for (i = 0; i < len; i++) { - if (hwctl & 0x1) - /* - * IO_ADDR_W used as CMD[i] reg to support multiple NAND - * chips. - */ - writeb(buf[i], nand->IO_ADDR_W); - else if (hwctl & 0x2) - writeb(buf[i], &(alpr_ndfc->addr_wait)); - else - writeb(buf[i], &(alpr_ndfc->data)); - } -} - -static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) -{ - int i; - - for (i = 0; i < len; i++) { - buf[i] = readb(&(alpr_ndfc->data)); - } -} - -static int alpr_nand_dev_ready(struct mtd_info *mtd) -{ - /* - * Blocking read to wait for NAND to be ready - */ - (void)readb(&(alpr_ndfc->addr_wait)); - - /* - * Return always true - */ - return 1; -} - -int board_nand_init(struct nand_chip *nand) -{ - alpr_ndfc = (struct alpr_ndfc_regs *)CONFIG_SYS_NAND_BASE; - - nand->ecc.mode = NAND_ECC_SOFT; - - /* Reference hardware control function */ - nand->cmd_ctrl = alpr_nand_hwcontrol; - nand->read_byte = alpr_nand_read_byte; - nand->write_buf = alpr_nand_write_buf; - nand->read_buf = alpr_nand_read_buf; - nand->dev_ready = alpr_nand_dev_ready; - - return 0; -} -#endif diff --git a/configs/alpr_defconfig b/configs/alpr_defconfig deleted file mode 100644 index b7cd74da3a..0000000000 --- a/configs/alpr_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_ALPR=y -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set diff --git a/doc/README.scrapyard b/doc/README.scrapyard index fb1ed42320..cdb2b6e2a2 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,7 +12,8 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -cam_enc_4xx arm arm926ejs - - Heiko Schocher +alpr powerpc ppc4xx - - Stefan Roese +cam_enc_4xx arm arm926ejs 8d775763 2015-08-20 Heiko Schocher atstk1003 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen atstk1004 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen atstk1006 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen diff --git a/include/configs/alpr.h b/include/configs/alpr.h deleted file mode 100644 index f113ebd74b..0000000000 --- a/include/configs/alpr.h +++ /dev/null @@ -1,351 +0,0 @@ -/* - * (C) Copyright 2006-2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_ALPR 1 /* Board is ebony */ -#define CONFIG_440GX 1 /* Specifc GX support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ -#define CONFIG_4xx_DCACHE /* Enable i- and d-cache */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CONFIG_SYS_FLASH_BASE 0xffe00000 /* start of FLASH */ -#define CONFIG_SYS_MONITOR_BASE 0xfffc0000 /* start of monitor */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ -#define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 -#define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 -#define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 - - -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08300000) -#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 2 /* Use UART1 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#undef CONFIG_SYS_EXT_SERIAL_CLOCK -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_CFI 1 /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ - -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ - -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ -#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */ -#undef CONFIG_SDRAM_ECC /* enable ECC support */ -#define CONFIG_SYS_SDRAM_TABLE { \ - {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \ - {(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* Don't probe these addrs */ - -/*----------------------------------------------------------------------- - * I2C EEPROM (PCF8594C) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 /* EEPROM PCF8594C */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* The Philips PCF8594C has */ - /* 8 byte page write mode using */ - /* last 3 bits of the address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 40 /* and takes up to 40 msec */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run kernelx\" to boot the system;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth3\0" \ - "hostname=alpr\0" \ - "fdt_file=alpr/alpr.dtb\0" \ - "fdt_addr=400000\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath} ${init}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate} " \ - "mem=193M\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ - "net_nfs_fdt=tftp 200000 ${bootfile};" \ - "tftp ${fdt_addr} ${fdt_file};" \ - "run nfsargs addip addtty;" \ - "bootm 200000 - ${fdt_addr}\0" \ - "rootpath=/opt/projects/alpr/nfs_root\0" \ - "bootfile=/alpr/uImage\0" \ - "kernel_addr=fff00000\0" \ - "ramdisk_addr=fff10000\0" \ - "load=tftp 100000 /alpr/u-boot/u-boot.bin\0" \ - "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ - "cp.b 100000 fffc0000 40000;" \ - "setenv filesize;saveenv\0" \ - "upd=run load update\0" \ - "ethprime=ppc_4xx_eth3\0" \ - "ethact=ppc_4xx_eth3\0" \ - "autoload=no\0" \ - "ipconfig=dhcp;setenv serverip 11.0.0.152\0" \ - "load_fpga=fpga load 0 ffe00000 10dd9a\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock6 rw " \ - "rootfstype=jffs2 init=/sbin/init\0" \ - "kernel1_mtd=nand read 200000 0 200000;run mtdargs addip addtty"\ - ";bootm 200000\0" \ - "kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip " \ - "addtty;bootm 200000\0" \ - "kernel1=setenv actkernel 'kernel1';run load_fpga " \ - "kernel1_mtd\0" \ - "kernel2=setenv actkernel 'kernel2';run load_fpga " \ - "kernel2_mtd\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run kernel2" - -#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0x02 /* dummy setting, no EMAC0 used */ -#define CONFIG_PHY1_ADDR 0x03 /* dummy setting, no EMAC1 used */ -#define CONFIG_PHY2_ADDR 0x01 /* PHY address for EMAC2 */ -#define CONFIG_PHY3_ADDR 0x02 /* PHY address for EMAC3 */ -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_M88E1111_PHY 1 /* needed for PHY specific setup*/ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FPGA_LOADMK -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PCI - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_ALT_MEMTEST 1 /* Enable more extensive memtest*/ -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -#define CONFIG_SYS_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ -#define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/ - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ -#define CONFIG_SYS_PCI_MASTER_INIT - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - -/*----------------------------------------------------------------------- - * FPGA stuff - *-----------------------------------------------------------------------*/ -#define CONFIG_FPGA -#define CONFIG_FPGA_ALTERA -#define CONFIG_FPGA_CYCLON2 -#define CONFIG_SYS_FPGA_CHECK_CTRLC -#define CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in - Reihe geschaltet -> sollte gehen, - aufpassen mit Datasize ist jetzt - halt doppelt so gross ... Seite 306 - ist das mit den multiple Device in PS - Mode erklaert ...*/ - -/* FPGA program pin configuration */ -#define CONFIG_SYS_GPIO_CLK 18 /* FPGA clk pin (cpu output) */ -#define CONFIG_SYS_GPIO_DATA 19 /* FPGA data pin (cpu output) */ -#define CONFIG_SYS_GPIO_STATUS 20 /* FPGA status pin (cpu input) */ -#define CONFIG_SYS_GPIO_CONFIG 21 /* FPGA CONFIG pin (cpu output) */ -#define CONFIG_SYS_GPIO_CON_DON 22 /* FPGA CONFIG_DONE pin (cpu input) */ - -#define CONFIG_SYS_GPIO_SEL_DPR 14 /* cpu output */ -#define CONFIG_SYS_GPIO_SEL_AVR 15 /* cpu output */ -#define CONFIG_SYS_GPIO_PROG_EN 23 /* cpu output */ - -/*----------------------------------------------------------------------- - * Definitions for GPIO setup - *-----------------------------------------------------------------------*/ -#define CONFIG_SYS_GPIO_SHUTDOWN (0x80000000 >> 6) -#define CONFIG_SYS_GPIO_SSD_EMPTY (0x80000000 >> 9) -#define CONFIG_SYS_GPIO_EREADY (0x80000000 >> 26) -#define CONFIG_SYS_GPIO_REV0 (0x80000000 >> 14) -#define CONFIG_SYS_GPIO_REV1 (0x80000000 >> 15) - -/*----------------------------------------------------------------------- - * NAND-FLASH stuff - *-----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_SYS_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */ -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE + 0, CONFIG_SYS_NAND_BASE + 2, \ - CONFIG_SYS_NAND_BASE + 4, CONFIG_SYS_NAND_BASE + 6 } -#define CONFIG_SYS_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */ -#define CONFIG_SYS_NAND_MAX_OOBFREE 2 -#define CONFIG_SYS_NAND_MAX_ECCPOS 56 - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH CONFIG_SYS_FLASH_BASE - -/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x01840380 /* TWT=3 */ -#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NAND_BASE | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#endif /* __CONFIG_H */