From: Akshay Saraswat Date: Thu, 13 Nov 2014 17:08:20 +0000 (+0530) Subject: Exynos5: ddr3: Choose between single or double channel config X-Git-Tag: v2015.01-rc3~54^2~13 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=0e03e824652745d652c6b557307fa784ec1669aa;p=u-boot Exynos5: ddr3: Choose between single or double channel config Add a 4G configuration and choose it based on the number of banks declared in config file. A board with 4 SDRAM banks declared (as per CONFIG_NR_DRAM_BANKS) will end up with the 2G confiuration. Signed-off-by: Doug Anderson Signed-off-by: Akshay Saraswat Acked-by: Simon Glass Tested-by: Simon Glass Signed-off-by: Minkyu Kang --- diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c index 4d73b45435..7c0b12ae51 100644 --- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c +++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c @@ -464,6 +464,16 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset) + DMC_OFFSET); pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE; + if (CONFIG_NR_DRAM_BANKS > 4) { + /* Need both controllers. */ + mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_2; + mem->chips_per_channel = 2; + mem->chips_to_configure = 2; + } else { + /* 2GB requires a single controller */ + mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_1; + } + /* Enable PAUSE for DREX */ setbits_le32(&clk->pause, ENABLE_BIT);