From: Wolfgang Denk Date: Sun, 25 Sep 2005 23:14:38 +0000 (+0200) Subject: Add support for MP2USB board. X-Git-Tag: LABEL_2006_03_12_0025~131 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=0e4018d244f00d7aff055e8f6d52dbc93a40da14;p=u-boot Add support for MP2USB board. Patch by Eric Benard, 07 Apr 2005 --- diff --git a/CHANGELOG b/CHANGELOG index 7955d5fe97..33d48a09c6 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes for U-Boot 1.1.4: ====================================================================== +* Add support for MP2USB board. + Patch by Eric Benard, 07 Apr 2005 + * Add board support for armadillo HT1070 Patch by Rowel Atienza, 06 Apr 2005 diff --git a/MAKEALL b/MAKEALL index 93bd4c9b1b..ba6025143f 100755 --- a/MAKEALL +++ b/MAKEALL @@ -179,10 +179,10 @@ LIST_ARM9=" \ integratorcp_CM920T_ETM integratorcp_CM922T_XA10 \ integratorcp_CM926EJ_S integratorcp_CM940T \ integratorcp_CM946E_S integratorcp_CM966E_S \ - lpd7a400 mx1ads mx1fs2 omap1510inn \ - omap1610h2 omap1610inn omap730p2 scb9328 \ - smdk2400 smdk2410 trab VCMA9 \ - versatile voiceblue \ + lpd7a400 mp2usb mx1ads mx1fs2 \ + omap1510inn omap1610h2 omap1610inn omap730p2 \ + scb9328 smdk2400 smdk2410 trab \ + VCMA9 versatile voiceblue \ " ######################################################################### diff --git a/Makefile b/Makefile index 157201f8f7..12c186b49f 100644 --- a/Makefile +++ b/Makefile @@ -1390,6 +1390,9 @@ at91rm9200dk_config : unconfig cmc_pu2_config : unconfig @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 +mp2usb_config : unconfig + @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200 + ######################################################################## ## ARM Integrator boards ## There are two variants /AP && /CP diff --git a/board/mp2usb/Makefile b/board/mp2usb/Makefile new file mode 100644 index 0000000000..8f1651192b --- /dev/null +++ b/board/mp2usb/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := mp2usb.o dm9161.o flash.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/mp2usb/config.mk b/board/mp2usb/config.mk new file mode 100644 index 0000000000..e299bfd5ef --- /dev/null +++ b/board/mp2usb/config.mk @@ -0,0 +1,3 @@ +TEXT_BASE = 0x27F00000 +## For testing: load at 0x20100000 and "go" at 0x201000A4 +#TEXT_BASE = 0x20100000 diff --git a/board/mp2usb/dm9161.c b/board/mp2usb/dm9161.c new file mode 100644 index 0000000000..73537c037d --- /dev/null +++ b/board/mp2usb/dm9161.c @@ -0,0 +1,243 @@ +/* + * (C) Copyright 2003 + * Author : Hamid Ikdoumi (Atmel) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_DRIVER_ETHER + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + +/* + * Name: + * dm9161_IsPhyConnected + * Description: + * Reads the 2 PHY ID registers + * Arguments: + * p_mac - pointer to AT91S_EMAC struct + * Return value: + * TRUE - if id read successfully + * FALSE- if error + */ +static unsigned int dm9161_IsPhyConnected (AT91PS_EMAC p_mac) +{ + unsigned short Id1, Id2; + + at91rm9200_EmacEnableMDIO (p_mac); + at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID1, &Id1); + at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID2, &Id2); + at91rm9200_EmacDisableMDIO (p_mac); + + if ((Id1 == (DM9161_PHYID1_OUI >> 6)) && + ((Id2 >> 10) == (DM9161_PHYID1_OUI & DM9161_LSB_MASK))) + return TRUE; + + return FALSE; +} + +/* + * Name: + * dm9161_GetLinkSpeed + * Description: + * Link parallel detection status of MAC is checked and set in the + * MAC configuration registers + * Arguments: + * p_mac - pointer to MAC + * Return value: + * TRUE - if link status set succesfully + * FALSE - if link status not set + */ +static UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac) +{ + unsigned short stat1, stat2; + + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &stat1)) + return FALSE; + + if (!(stat1 & DM9161_LINK_STATUS)) /* link status up? */ + return FALSE; + + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_DSCSR, &stat2)) + return FALSE; + + if ((stat1 & DM9161_100BASE_TX_FD) && (stat2 & DM9161_100FDX)) { + /*set Emac for 100BaseTX and Full Duplex */ + p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD; + return TRUE; + } + + if ((stat1 & DM9161_10BASE_T_FD) && (stat2 & DM9161_10FDX)) { + /*set MII for 10BaseT and Full Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_FD; + return TRUE; + } + + if ((stat1 & DM9161_100BASE_T4_HD) && (stat2 & DM9161_100HDX)) { + /*set MII for 100BaseTX and Half Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_SPD; + return TRUE; + } + + if ((stat1 & DM9161_10BASE_T_HD) && (stat2 & DM9161_10HDX)) { + /*set MII for 10BaseT and Half Duplex */ + p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD); + return TRUE; + } + return FALSE; +} + + +/* + * Name: + * dm9161_InitPhy + * Description: + * MAC starts checking its link by using parallel detection and + * Autonegotiation and the same is set in the MAC configuration registers + * Arguments: + * p_mac - pointer to struct AT91S_EMAC + * Return value: + * TRUE - if link status set succesfully + * FALSE - if link status not set + */ +static UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac) +{ + UCHAR ret = TRUE; + unsigned short IntValue; + + at91rm9200_EmacEnableMDIO (p_mac); + + if (!dm9161_GetLinkSpeed (p_mac)) { + /* Try another time */ + ret = dm9161_GetLinkSpeed (p_mac); + } + + /* Disable PHY Interrupts */ + at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue); + /* clear FDX, SPD, Link, INTR masks */ + IntValue &= ~(DM9161_FDX_MASK | DM9161_SPD_MASK | + DM9161_LINK_MASK | DM9161_INTR_MASK); + at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue); + at91rm9200_EmacDisableMDIO (p_mac); + + return (ret); +} + + +/* + * Name: + * dm9161_AutoNegotiate + * Description: + * MAC Autonegotiates with the partner status of same is set in the + * MAC configuration registers + * Arguments: + * dev - pointer to struct net_device + * Return value: + * TRUE - if link status set successfully + * FALSE - if link status not set + */ +static UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status) +{ + unsigned short value; + unsigned short PhyAnar; + unsigned short PhyAnalpar; + + /* Set dm9161 control register */ + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + value &= ~DM9161_AUTONEG; /* remove autonegotiation enable */ + value |= DM9161_ISOLATE; /* Electrically isolate PHY */ + if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + + /* Set the Auto_negotiation Advertisement Register */ + /* MII advertising for Next page, 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */ + PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX | + DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3; + if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar)) + return FALSE; + + /* Read the Control Register */ + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + + value |= DM9161_SPEED_SELECT | DM9161_AUTONEG | DM9161_DUPLEX_MODE; + if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + /* Restart Auto_negotiation */ + value |= DM9161_RESTART_AUTONEG; + if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value)) + return FALSE; + + /*check AutoNegotiate complete */ + udelay (10000); + at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &value); + if (!(value & DM9161_AUTONEG_COMP)) + return FALSE; + + /* Get the AutoNeg Link partner base page */ + if (!at91rm9200_EmacReadPhy (p_mac, DM9161_ANLPAR, &PhyAnalpar)) + return FALSE; + + if ((PhyAnar & DM9161_TX_FDX) && (PhyAnalpar & DM9161_TX_FDX)) { + /*set MII for 100BaseTX and Full Duplex */ + p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD; + return TRUE; + } + + if ((PhyAnar & DM9161_10_FDX) && (PhyAnalpar & DM9161_10_FDX)) { + /*set MII for 10BaseT and Full Duplex */ + p_mac->EMAC_CFG = (p_mac->EMAC_CFG & + ~(AT91C_EMAC_SPD | AT91C_EMAC_FD)) + | AT91C_EMAC_FD; + return TRUE; + } + return FALSE; +} + + +/* + * Name: + * at91rm92000_GetPhyInterface + * Description: + * Initialise the interface functions to the PHY + * Arguments: + * None + * Return value: + * None + */ +void at91rm92000_GetPhyInterface(AT91PS_PhyOps p_phyops) +{ + p_phyops->Init = dm9161_InitPhy; + p_phyops->IsPhyConnected = dm9161_IsPhyConnected; + p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; + p_phyops->AutoNegotiate = dm9161_AutoNegotiate; +} + +#endif /* CONFIG_COMMANDS & CFG_CMD_NET */ + +#endif /* CONFIG_DRIVER_ETHER */ diff --git a/board/mp2usb/flash.c b/board/mp2usb/flash.c new file mode 100644 index 0000000000..070dbf62c4 --- /dev/null +++ b/board/mp2usb/flash.c @@ -0,0 +1,557 @@ +/* + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Modified for the MP2USB by (C) Copyright 2005 Eric Benard + * ebenard@eukrea.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#define CFG_MAX_FLASH_BANKS 1 +#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +#define FLASH_PORT_WIDTH ushort +#define FLASH_PORT_WIDTHV vu_short +#define SWAP(x) __swab16(x) + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define mb() __asm__ __volatile__ ("" : : : "memory") + +/* Intel-compatible flash commands */ +#define INTEL_PROGRAM 0x00100010 +#define INTEL_ERASE 0x00200020 +#define INTEL_PROG 0x00400040 +#define INTEL_CLEAR 0x00500050 +#define INTEL_LOCKBIT 0x00600060 +#define INTEL_PROTECT 0x00010001 +#define INTEL_STATUS 0x00700070 +#define INTEL_READID 0x00900090 +#define INTEL_SUSPEND 0x00B000B0 +#define INTEL_CONFIRM 0x00D000D0 +#define INTEL_RESET 0xFFFFFFFF + +/* Intel-compatible flash status bits */ +#define INTEL_FINISHED 0x00800080 +#define INTEL_OK 0x00800080 + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (FPW *addr, flash_info_t *info); +static int write_data (flash_info_t *info, ulong dest, FPW data); +static void flash_get_offsets (ulong base, flash_info_t *info); +void inline spin_wheel (void); + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ + int i; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + switch (i) { + case 0: + flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); + flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); + break; + default: + panic ("configured too many flash banks!\n"); + break; + } + size += flash_info[i].size; + } + + /* Protect monitor and environment sectors + */ + flash_protect ( FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, + &flash_info[0] ); + + flash_protect ( FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] ); + + return size; +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + return; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); + info->protect[i] = 0; + } + } +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf ("INTEL "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F640J3A: + printf ("28F640J3A\n"); + break; + case FLASH_28F128J3A: + printf ("28F128J3A\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (FPW *addr, flash_info_t *info) +{ + volatile FPW value; + + /* Write auto select command: read Manufacturer ID */ + addr[0x5555] = (FPW) 0x00AA00AA; + addr[0x2AAA] = (FPW) 0x00550055; + addr[0x5555] = (FPW) 0x00900090; + + mb (); + value = addr[0]; + + switch (value) { + + case (FPW) INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + addr[0] = (FPW) INTEL_RESET; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + mb (); + value = addr[1]; /* device ID */ + + switch (value) { + + case (FPW) INTEL_ID_28F640J3A: + info->flash_id += FLASH_28F640J3A; + info->sector_count = 64; + info->size = 0x00800000; + break; /* => 8 MB */ + + case (FPW) INTEL_ID_28F128J3A: + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 0x01000000; + break; /* => 16 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + addr[0] = (FPW) INTEL_RESET; /* restore read mode */ + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0; + int cflag, iflag; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + start = get_timer (0); + last = start; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + /* Disable interrupts which might cause a timeout here */ +/* flag = disable_interrupts (); */ + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + FPWV *addr = (FPWV *) (info->start[sect]); + FPW status; + + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + *addr = (FPW) INTEL_CLEAR; /* clear status register */ + *addr = (FPW) INTEL_ERASE; /* erase setup */ + *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ + + while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = (FPW) INTEL_SUSPEND; /* suspend erase */ + *addr = (FPW) INTEL_RESET; /* reset to read mode */ + rcode = 1; + break; + } + } + + *addr = INTEL_CLEAR; /* clear status register cmd. */ + *addr = INTEL_RESET; /* resest to read mode */ + + printf (" done\n"); + } + } + + if (iflag) + enable_interrupts (); + + if (cflag) + icache_enable (); + + return rcode; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp; + FPW data; + int count, i, l, rc, port_width; + + if (info->flash_id == FLASH_UNKNOWN) { + return 4; + } + + /* get lower word aligned address */ + wp = (addr & ~1); + port_width = 2; + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + return (rc); + } + wp += port_width; + } + + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + return (rc); + } + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel (); + count = 0; + } + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return (write_data (info, wp, SWAP (data))); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t *info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + ulong status; + int cflag, iflag; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr); + return (2); + } + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + /* Disable interrupts which might cause a timeout here */ + /*flag = disable_interrupts (); */ + + *addr = (FPW) INTEL_PROG; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait while polling the status register */ + while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) INTEL_RESET; /* restore read mode */ + return (1); + } + } + + *addr = (FPW) INTEL_RESET; /* restore read mode */ + + if (iflag) + enable_interrupts (); + + if (cflag) + icache_enable (); + + return (0); +} + +void inline spin_wheel (void) +{ + static int p = 0; + static char w[] = "\\/-"; + + printf ("\010%c", w[p]); + (++p == 3) ? (p = 0) : 0; +} + +/*----------------------------------------------------------------------- + * Set/Clear sector's lock bit, returns: + * 0 - OK + * 1 - Error (timeout, voltage problems, etc.) + */ +int flash_real_protect(flash_info_t *info, long sector, int prot) +{ + int i; + int rc = 0; + FPWV *addr = (FPWV *)(info->start[sector]); + int flag = disable_interrupts(); + + *addr = (FPW) INTEL_CLEAR; /* Clear status register */ + if (prot) { /* Set sector lock bit */ + *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */ + *addr = (FPW) INTEL_PROTECT; /* set */ + } + else { /* Clear sector lock bit */ + *addr = (FPW) INTEL_LOCKBIT; /* All sectors lock bits */ + *addr = (FPW) INTEL_CONFIRM; /* clear */ + } + + reset_timer_masked (); + + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { + if (get_timer_masked () > CFG_FLASH_UNLOCK_TOUT) { + printf("Flash lock bit operation timed out\n"); + rc = 1; + break; + } + } + + if (*addr != (FPW) INTEL_OK) { + printf("Flash lock bit operation failed at %08X, CSR=%08X\n", + (uint)addr, (uint)*addr); + rc = 1; + } + + if (!rc) + info->protect[sector] = prot; + + /* + * Clear lock bit command clears all sectors lock bits, so + * we have to restore lock bits of protected sectors. + */ + if (!prot) + { + for (i = 0; i < info->sector_count; i++) + { + if (info->protect[i]) + { + reset_timer_masked (); + addr = (FPWV *) (info->start[i]); + *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */ + *addr = (FPW) INTEL_PROTECT; /* set */ + while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) + { + if (get_timer_masked () > CFG_FLASH_UNLOCK_TOUT) + { + printf("Flash lock bit operation timed out\n"); + rc = 1; + break; + } + } + } + } + } + + if (flag) + enable_interrupts(); + + *addr = (FPW) INTEL_RESET; /* Reset to read array mode */ + + return rc; +} diff --git a/board/mp2usb/mp2usb.c b/board/mp2usb/mp2usb.c new file mode 100644 index 0000000000..b22f2e19a5 --- /dev/null +++ b/board/mp2usb/mp2usb.c @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * Modified for the MP2USB by (C) Copyright 2005 Eric Benard + * ebenard@eukrea.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* Enable Ctrlc */ + console_init_f (); + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of MP2USB-Board. */ + gd->bd->bi_arch_number = MACH_TYPE_MP2USB; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} diff --git a/board/mp2usb/u-boot.lds b/board/mp2usb/u-boot.lds new file mode 100644 index 0000000000..76df6b2af1 --- /dev/null +++ b/board/mp2usb/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm920t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h new file mode 100644 index 0000000000..005e91298b --- /dev/null +++ b/include/configs/mp2usb.h @@ -0,0 +1,226 @@ +/* + * 2004-2005 Gary Jennejohn + * + * Modified for the MP2USB by (C) Copyright 2005 Eric Benard + * ebenard@eukrea.com + * + * Configuration settings for the MP2USB board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */ +#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ +#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ +#define CONFIG_MP2USB 1 /* on an MP2USB Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define USE_920T_MMU 1 + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CFG_ATMEL_PLL_INIT_BUG 1 +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#define CFG_USE_MAIN_OSCILLATOR 1 +/* flash */ +#define MC_PUIA_VAL 0x00000000 +#define MC_PUP_VAL 0x00000000 +#define MC_PUER_VAL 0x00000000 +#define MC_ASR_VAL 0x00000000 +#define MC_AASR_VAL 0x00000000 +#define EBI_CFGR_VAL 0x00000000 +#define SMC2_CSR_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ + +/* clocks */ +#define PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ +#define PLLBR_VAL 0x10483E0E /* 48 MHz (divider by 2 for USB) */ +#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */ + +/* sdram */ +#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ +#define PIOC_BSR_VAL 0x00000000 +#define PIOC_PDR_VAL 0xFFFF0000 +#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ +#define SDRC_CR_VAL 0x3211295A /* set up the SDRAM */ +#define SDRAM 0x20000000 /* address of the SDRAM */ +#define SDRAM1 0x20000020 /* address of the SDRAM */ +#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ +#define SDRC_MR_VAL 0x00000002 /* Precharge All */ +#define SDRC_MR_VAL1 0x00000004 /* refresh */ +#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ +#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ +#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +#define CONFIG_BAUDRATE 115200 + +#define CFG_AT91C_BRGR_DIVISOR 33 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */ + +/* + * Hardware drivers + */ + +/* define one of these to choose the DBGU, USART0 or USART1 as console */ +#define CONFIG_DBGU +#undef CONFIG_USART0 +#undef CONFIG_USART1 + +#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ + +#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ + +#undef CONFIG_HARD_I2C + +#ifdef CONFIG_HARD_I2C +#define CFG_I2C_SPEED 0 /* not used */ +#define CFG_I2C_SLAVE 0 /* not used */ +#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */ +#define CFG_I2C_RTC_ADDR 0x32 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_I2C_EEPROM_ADDR_OVERFLOW +#endif +/* still about 20 kB free with this defined */ +#define CFG_LONGHELP + +#define CONFIG_BOOTDELAY 3 + +#ifdef CONFIG_HARD_I2C +#define CONFIG_COMMANDS \ + ((CONFIG_CMD_DFL | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_NFS | \ + CFG_CMD_SNTP | \ + CFG_CMD_MISC)) +#else +#define CONFIG_COMMANDS \ + ((CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_NFS | \ + CFG_CMD_SNTP | \ + CFG_CMD_CACHE) & \ + ~(CFG_CMD_BDI | \ + CFG_CMD_IMI | \ + CFG_CMD_AUTOSCRIPT | \ + CFG_CMD_FPGA | \ + CFG_CMD_MISC | \ + CFG_CMD_LOADS )) +#define CONFIG_TIMESTAMP +#endif +#define CFG_LONGHELP + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 + +#define CONFIG_DRIVER_ETHER +#define CONFIG_NET_RETRY_COUNT 20 +#undef CONFIG_AT91C_USE_RMII + +#define PHYS_FLASH_1 0x10000000 +#define PHYS_FLASH_SIZE 0x1000000 /* 16 megs main flash */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */ +#define CFG_FLASH_LOCK_TOUT (10*CFG_HZ) /* Timeout for Flash Set Lock Bit */ +#define CFG_FLASH_UNLOCK_TOUT (10*CFG_HZ) /* Timeout for Flash Clear Lock Bits */ +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x20000 /* after u-boot.bin */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x20000 + +#define CFG_LOAD_ADDR 0x21000000 /* default load address */ + +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_MAXARGS 32 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ + +#ifndef __ASSEMBLY__ +/*----------------------------------------------------------------------- + * Board specific extension for bd_info + * + * This structure is embedded in the global bd_info (bd_t) structure + * and can be used by the board specific code (eg board/...) + */ + +struct bd_info_ext { + /* helper variable for board environment handling + * + * env_crc_valid == 0 => uninitialised + * env_crc_valid > 0 => environment crc in flash is valid + * env_crc_valid < 0 => environment crc in flash is invalid + */ + int env_crc_valid; +}; +#endif /* __ASSEMBLY__ */ + +#define CFG_HZ 1000 +#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ + /* AT91C_TC_TIMER_DIV1_CLOCK */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#define CFG_DEVICE_NULLDEV 1 /* enble null device */ +#undef CONFIG_SILENT_CONSOLE /* enable silent startup */ + +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_STOP_STR " " +#define CONFIG_AUTOBOOT_DELAY_STR "d" + +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +#endif /* __CONFIG_H */