From: Masahiro Yamada Date: Fri, 24 Nov 2017 15:25:33 +0000 (+0900) Subject: ARM: uniphier: remove XIRQ pin settings X-Git-Tag: v2018.01-rc1~61^2~3 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=10c62f41e37b3c5dee36432f760851eb34ce8d6c;p=u-boot ARM: uniphier: remove XIRQ pin settings The XIRQ pins are now set up on the Linux side by the GPIO hogging. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c index 28784ea631..121b78605f 100644 --- a/arch/arm/mach-uniphier/board_init.c +++ b/arch/arm/mach-uniphier/board_init.c @@ -17,24 +17,9 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_ARCH_UNIPHIER_LD11 -static void uniphier_ld11_misc_init(void) -{ - sg_set_pinsel(149, 14, 8, 4); /* XIRQ0 -> XIRQ0 */ - sg_set_iectrl(149); - sg_set_pinsel(153, 14, 8, 4); /* XIRQ4 -> XIRQ4 */ - sg_set_iectrl(153); -} -#endif - #ifdef CONFIG_ARCH_UNIPHIER_LD20 static void uniphier_ld20_misc_init(void) { - sg_set_pinsel(149, 14, 8, 4); /* XIRQ0 -> XIRQ0 */ - sg_set_iectrl(149); - sg_set_pinsel(153, 14, 8, 4); /* XIRQ4 -> XIRQ4 */ - sg_set_iectrl(153); - /* ES1 errata: increase VDD09 supply to suppress VBO noise */ if (uniphier_get_soc_revision() == 1) { writel(0x00000003, 0x6184e004); @@ -105,7 +90,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { .sbc_init = uniphier_ld11_sbc_init, .pll_init = uniphier_ld11_pll_init, .clk_init = uniphier_ld11_clk_init, - .misc_init = uniphier_ld11_misc_init, }, #endif #if defined(CONFIG_ARCH_UNIPHIER_LD20)