From: Christian Gmeiner <christian.gmeiner@gmail.com>
Date: Wed, 3 Jun 2015 09:33:23 +0000 (+0200)
Subject: ot1200: setup i2c bus 1 in setup_iomux_i2c()
X-Git-Tag: v2015.07-rc2~6^2~1
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=130e6c8cbd9c255da218e9fa1a136c065808aa93;p=u-boot

ot1200: setup i2c bus 1 in setup_iomux_i2c()

On this bus there is a EEPROM containing EDID and ddr3
calibration information.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
---

diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c
index a33d496b70..2237b7aa1f 100644
--- a/board/bachmann/ot1200/ot1200.c
+++ b/board/bachmann/ot1200/ot1200.c
@@ -122,6 +122,20 @@ static void setup_iomux_features(void)
 
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 
+/* I2C2 - EEPROM */
+static struct i2c_pads_info i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
+		.gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
+		.gp = IMX_GPIO_NR(2, 30)
+	},
+	.sda = {
+		.i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
+		.gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
+		.gp = IMX_GPIO_NR(3, 16)
+	}
+};
+
 /* I2C3 - IO expander  */
 static struct i2c_pads_info i2c_pad_info2 = {
 	.scl = {
@@ -138,6 +152,7 @@ static struct i2c_pads_info i2c_pad_info2 = {
 
 static void setup_iomux_i2c(void)
 {
+	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
 }