From: Bin Meng Date: Fri, 21 Apr 2017 14:24:49 +0000 (-0700) Subject: x86: Document ACPI S3 support X-Git-Tag: v2017.07-rc1~254^2~7 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=13c9d8482528b466a8c7b42be8baa33bafb08b0b;p=u-boot x86: Document ACPI S3 support Now that we have ACPI S3 support on Intel MinnowMax board, document some generic information of S3 and how to test it. Signed-off-by: Bin Meng Reviewed-by: Simon Glass Tested-by: Stefan Roese --- diff --git a/doc/README.x86 b/doc/README.x86 index a38cc1bc6c..c69dc1c511 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -1014,12 +1014,12 @@ compile ACPI DSDT table written in ASL format to AML format. You can get the compiler via "apt-get install iasl" if you are on Ubuntu or download the source from [17] to compile one by yourself. -Current ACPI support in U-Boot is not complete. More features will be added -in the future. The status as of today is: +Current ACPI support in U-Boot is basically complete. More optional features +can be added in the future. The status as of today is: * Support generating RSDT, XSDT, FACS, FADT, MADT, MCFG tables. * Support one static DSDT table only, compiled by Intel ACPI compiler. - * Support S0/S5, reboot and shutdown from OS. + * Support S0/S3/S4/S5, reboot and shutdown from OS. * Support booting a pre-installed Ubuntu distribution via 'zboot' command. * Support installing and booting Ubuntu 14.04 (or above) from U-Boot with the help of SeaBIOS using legacy interface (non-UEFI mode). @@ -1027,9 +1027,6 @@ in the future. The status as of today is: of SeaBIOS using legacy interface (non-UEFI mode). * Support ACPI interrupts with SCI only. -Features not supported so far (to make it a complete ACPI solution): - * S3 (Suspend to RAM), S4 (Suspend to Disk). - Features that are optional: * Dynamic AML bytecodes insertion at run-time. We may need this to support SSDT table generation and DSDT fix up. @@ -1046,6 +1043,21 @@ command from the OS. For other platform boards, ACPI support status can be checked by examining their board defconfig files to see if CONFIG_GENERATE_ACPI_TABLE is set to y. +The S3 sleeping state is a low wake latency sleeping state defined by ACPI +spec where all system context is lost except system memory. To test S3 resume +with a Linux kernel, simply run "echo mem > /sys/power/state" and kernel will +put the board to S3 state where the power is off. So when the power button is +pressed again, U-Boot runs as it does in cold boot and detects the sleeping +state via ACPI register to see if it is S3, if yes it means we are waking up. +U-Boot is responsible for restoring the machine state as it is before sleep. +When everything is done, U-Boot finds out the wakeup vector provided by OSes +and jump there. To determine whether ACPI S3 resume is supported, check to +see if CONFIG_HAVE_ACPI_RESUME is set for that specific board. + +Note for testing S3 resume with Windows, correct graphics driver must be +installed for your platform, otherwise you won't find "Sleep" option in +the "Power" submenu from the Windows start menu. + EFI Support ----------- U-Boot supports booting as a 32-bit or 64-bit EFI payload, e.g. with UEFI.