From: Lukasz Majewski <lukma@denx.de>
Date: Fri, 11 May 2018 14:50:59 +0000 (+0200)
Subject: display5: factory: Add support for BOOT_FROM = FACTORY switch
X-Git-Tag: v2018.07-rc3~15^2~58
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=13e012f7b5f31d700185d5c10c6090aec4628164;p=u-boot

display5: factory: Add support for BOOT_FROM = FACTORY switch

When BOOT_FROM = FACTORY, then the LEG's factory setup is performed.

This code relies on boot_nfs u-boot command, so it shall be adjusted
appropriately (e.g. provide proper fitImage file).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
---

diff --git a/include/configs/display5.h b/include/configs/display5.h
index cff689420e..c6a46c8707 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -100,7 +100,11 @@
 #define CONFIG_BAUDRATE			115200
 
 #ifndef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run boot_mmc"
+#define CONFIG_BOOTCOMMAND "if test ${BOOT_FROM} = FACTORY; then " \
+	     "run factory_nfs;" \
+	"else " \
+	     "run boot_mmc;" \
+	"fi"
 #endif
 
 #define PARTS_DEFAULT \
@@ -273,6 +277,9 @@
 	"up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
 	"download_kernel=" \
 		"tftpboot ${loadaddr} ${kernel_file};\0" \
+	"factory_nfs=" \
+	     "echo BOOT: FACTORY (LEG);" \
+	     "run boot_nfs\0" \
 	"boot_kernel_recovery=" KERNEL_RECOVERY_PROCEDURE "\0" \
 	"boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
 	"recovery=" \