From: Howard Chu Date: Fri, 30 Nov 2012 20:30:51 +0000 (-0800) Subject: Rename libmdb to liblmdb, lmdb.h X-Git-Tag: OPENLDAP_REL_ENG_2_4_34~103^2~3 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=13f3bcd59c2055d53e4759b0c3356b001eca44b0;p=openldap Rename libmdb to liblmdb, lmdb.h Avoid naming conflicts with other mdb* packages. Bump version to 0.9.5 --- diff --git a/libraries/libmdb/Makefile b/libraries/libmdb/Makefile index 67a2007bb8..5c206f2238 100644 --- a/libraries/libmdb/Makefile +++ b/libraries/libmdb/Makefile @@ -6,7 +6,7 @@ LDLIBS = SOLIBS = PROGS = mdb_stat mdb_copy mtest mtest2 mtest3 mtest4 mtest5 -all: libmdb.a libmdb.so $(PROGS) +all: liblmdb.a liblmdb.so $(PROGS) clean: rm -rf $(PROGS) *.[ao] *.so *~ testdb @@ -15,23 +15,23 @@ test: all mkdir testdb ./mtest && ./mdb_stat testdb -libmdb.a: mdb.o midl.o +liblmdb.a: mdb.o midl.o ar rs $@ mdb.o midl.o -libmdb.so: mdb.o midl.o +liblmdb.so: mdb.o midl.o gcc -pthread -shared -o $@ mdb.o midl.o $(SOLIBS) -mdb_stat: mdb_stat.o libmdb.a -mdb_copy: mdb_copy.o libmdb.a -mtest: mtest.o libmdb.a -mtest2: mtest2.o libmdb.a -mtest3: mtest3.o libmdb.a -mtest4: mtest4.o libmdb.a -mtest5: mtest5.o libmdb.a -mtest6: mtest6.o libmdb.a -mfree: mfree.o libmdb.a - -mdb.o: mdb.c mdb.h midl.h +mdb_stat: mdb_stat.o liblmdb.a +mdb_copy: mdb_copy.o liblmdb.a +mtest: mtest.o liblmdb.a +mtest2: mtest2.o liblmdb.a +mtest3: mtest3.o liblmdb.a +mtest4: mtest4.o liblmdb.a +mtest5: mtest5.o liblmdb.a +mtest6: mtest6.o liblmdb.a +mfree: mfree.o liblmdb.a + +mdb.o: mdb.c lmdb.h midl.h $(CC) $(CFLAGS) -fPIC $(CPPFLAGS) -c mdb.c midl.o: midl.c midl.h @@ -40,5 +40,5 @@ midl.o: midl.c midl.h %: %.o $(CC) $(CFLAGS) $(LDFLAGS) $^ $(LDLIBS) -o $@ -%.o: %.c mdb.h +%.o: %.c lmdb.h $(CC) $(CFLAGS) $(CPPFLAGS) -c $< diff --git a/libraries/libmdb/lmdb.h b/libraries/libmdb/lmdb.h new file mode 100644 index 0000000000..a2118b5bac --- /dev/null +++ b/libraries/libmdb/lmdb.h @@ -0,0 +1,1163 @@ +/** @file lmdb.h + * @brief Lightning memory-mapped database library + * + * @mainpage MDB Lightning Memory-Mapped Database Manager + * + * @section intro_sec Introduction + * MDB is a Btree-based database management library modeled loosely on the + * BerkeleyDB API, but much simplified. The entire database is exposed + * in a memory map, and all data fetches return data directly + * from the mapped memory, so no malloc's or memcpy's occur during + * data fetches. As such, the library is extremely simple because it + * requires no page caching layer of its own, and it is extremely high + * performance and memory-efficient. It is also fully transactional with + * full ACID semantics, and when the memory map is read-only, the + * database integrity cannot be corrupted by stray pointer writes from + * application code. + * + * The library is fully thread-aware and supports concurrent read/write + * access from multiple processes and threads. Data pages use a copy-on- + * write strategy so no active data pages are ever overwritten, which + * also provides resistance to corruption and eliminates the need of any + * special recovery procedures after a system crash. Writes are fully + * serialized; only one write transaction may be active at a time, which + * guarantees that writers can never deadlock. The database structure is + * multi-versioned so readers run with no locks; writers cannot block + * readers, and readers don't block writers. + * + * Unlike other well-known database mechanisms which use either write-ahead + * transaction logs or append-only data writes, MDB requires no maintenance + * during operation. Both write-ahead loggers and append-only databases + * require periodic checkpointing and/or compaction of their log or database + * files otherwise they grow without bound. MDB tracks free pages within + * the database and re-uses them for new write operations, so the database + * size does not grow without bound in normal use. + * + * The memory map can be used as a read-only or read-write map. It is + * read-only by default as this provides total immunity to corruption. + * Using read-write mode offers much higher write performance, but adds + * the possibility for stray application writes thru pointers to silently + * corrupt the database. Of course if your application code is known to + * be bug-free (...) then this is not an issue. + * + * @section caveats_sec Caveats + * Troubleshooting the lock file, plus semaphores on BSD systems: + * + * - A broken lockfile can cause sync issues. + * Stale reader transactions left behind by an aborted program + * cause further writes to grow the database quickly, and + * stale locks can block further operation. + * + * Fix: Terminate all programs using the database, or make + * them close it. Next database user will reset the lockfile. + * + * - On BSD systems or others configured with MDB_USE_POSIX_SEM, + * startup can fail due to semaphores owned by another userid. + * + * Fix: Open and close the database as the user which owns the + * semaphores (likely last user) or as root, while no other + * process is using the database. + * + * Restrictions/caveats (in addition to those listed for some functions): + * + * - Only the database owner should normally use the database on + * BSD systems or when otherwise configured with MDB_USE_POSIX_SEM. + * Multiple users can cause startup to fail later, as noted above. + * + * - A thread can only use one transaction at a time, plus any child + * transactions. Each transaction belongs to one thread. See below. + * + * - Use an MDB_env* in the process which opened it, without fork()ing. + * + * - Do not have open an MDB database twice in the same process at + * the same time. Not even from a plain open() call - close()ing it + * breaks flock() advisory locking. + * + * - Avoid long-lived transactions. Read transactions prevent + * reuse of pages freed by newer write transactions, thus the + * database can grow quickly. Write transactions prevent + * other write transactions, since writes are serialized. + * + * ...when several processes can use a database concurrently: + * + * - Avoid suspending a process with active transactions. These + * would then be "long-lived" as above. + * + * - Avoid aborting a process with an active transaction. + * The transaction becomes "long-lived" as above until the lockfile + * is reset, since the process may not remove it from the lockfile. + * + * - If you do that anyway, close the environment once in a while, + * so the lockfile can get reset. + * + * - Do not use MDB databases on remote filesystems, even between + * processes on the same host. This breaks flock() on some OSes, + * possibly memory map sync, and certainly sync between programs + * on different hosts. + * + * - Opening a database can fail if another process is opening or + * closing it at exactly the same time. + * + * @author Howard Chu, Symas Corporation. + * + * @copyright Copyright 2011-2012 Howard Chu, Symas Corp. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted only as authorized by the OpenLDAP + * Public License. + * + * A copy of this license is available in the file LICENSE in the + * top-level directory of the distribution or, alternatively, at + * . + * + * @par Derived From: + * This code is derived from btree.c written by Martin Hedenfalk. + * + * Copyright (c) 2009, 2010 Martin Hedenfalk + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef _LMDB_H_ +#define _LMDB_H_ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/** @defgroup mdb MDB API + * @{ + * @brief OpenLDAP Lightning Memory-Mapped Database Manager + */ +/** @defgroup Version Version Macros + * @{ + */ +/** Library major version */ +#define MDB_VERSION_MAJOR 0 +/** Library minor version */ +#define MDB_VERSION_MINOR 9 +/** Library patch version */ +#define MDB_VERSION_PATCH 5 + +/** Combine args a,b,c into a single integer for easy version comparisons */ +#define MDB_VERINT(a,b,c) (((a) << 24) | ((b) << 16) | (c)) + +/** The full library version as a single integer */ +#define MDB_VERSION_FULL \ + MDB_VERINT(MDB_VERSION_MAJOR,MDB_VERSION_MINOR,MDB_VERSION_PATCH) + +/** The release date of this library version */ +#define MDB_VERSION_DATE "November 30, 2012" + +/** A stringifier for the version info */ +#define MDB_VERSTR(a,b,c,d) "MDB " #a "." #b "." #c ": (" d ")" + +/** A helper for the stringifier macro */ +#define MDB_VERFOO(a,b,c,d) MDB_VERSTR(a,b,c,d) + +/** The full library version as a C string */ +#define MDB_VERSION_STRING \ + MDB_VERFOO(MDB_VERSION_MAJOR,MDB_VERSION_MINOR,MDB_VERSION_PATCH,MDB_VERSION_DATE) +/** @} */ + +/** @brief Opaque structure for a database environment. + * + * A DB environment supports multiple databases, all residing in the same + * shared-memory map. + */ +typedef struct MDB_env MDB_env; + +/** @brief Opaque structure for a transaction handle. + * + * All database operations require a transaction handle. Transactions may be + * read-only or read-write. + */ +typedef struct MDB_txn MDB_txn; + +/** @brief A handle for an individual database in the DB environment. */ +typedef unsigned int MDB_dbi; + +/** @brief Opaque structure for navigating through a database */ +typedef struct MDB_cursor MDB_cursor; + +/** @brief Generic structure used for passing keys and data in and out of the database. */ +typedef struct MDB_val { + size_t mv_size; /**< size of the data item */ + void *mv_data; /**< address of the data item */ +} MDB_val; + +/** @brief A callback function used to compare two keys in a database */ +typedef int (MDB_cmp_func)(const MDB_val *a, const MDB_val *b); + +/** @brief A callback function used to relocate a position-dependent data item + * in a fixed-address database. + * + * The \b newptr gives the item's desired address in + * the memory map, and \b oldptr gives its previous address. The item's actual + * data resides at the address in \b item. This callback is expected to walk + * through the fields of the record in \b item and modify any + * values based at the \b oldptr address to be relative to the \b newptr address. + * @param[in,out] item The item that is to be relocated. + * @param[in] oldptr The previous address. + * @param[in] newptr The new address to relocate to. + * @param[in] relctx An application-provided context, set by #mdb_set_relctx(). + * @todo This feature is currently unimplemented. + */ +typedef void (MDB_rel_func)(MDB_val *item, void *oldptr, void *newptr, void *relctx); + +/** @defgroup mdb_env Environment Flags + * + * Values do not overlap Database Flags. + * @{ + */ + /** mmap at a fixed address */ +#define MDB_FIXEDMAP 0x01 + /** no environment directory */ +#define MDB_NOSUBDIR 0x4000 + /** don't fsync after commit */ +#define MDB_NOSYNC 0x10000 + /** read only */ +#define MDB_RDONLY 0x20000 + /** don't fsync metapage after commit */ +#define MDB_NOMETASYNC 0x40000 + /** use writable mmap */ +#define MDB_WRITEMAP 0x80000 + /** use asynchronous msync */ +#define MDB_MAPASYNC 0x100000 +/** @} */ + +/** @defgroup mdb_open Database Flags + * + * Values do not overlap Environment Flags. + * @{ + */ + /** use reverse string keys */ +#define MDB_REVERSEKEY 0x02 + /** use sorted duplicates */ +#define MDB_DUPSORT 0x04 + /** numeric keys in native byte order. + * The keys must all be of the same size. */ +#define MDB_INTEGERKEY 0x08 + /** with #MDB_DUPSORT, sorted dup items have fixed size */ +#define MDB_DUPFIXED 0x10 + /** with #MDB_DUPSORT, dups are numeric in native byte order */ +#define MDB_INTEGERDUP 0x20 + /** with #MDB_DUPSORT, use reverse string dups */ +#define MDB_REVERSEDUP 0x40 + /** create DB if not already existing */ +#define MDB_CREATE 0x40000 +/** @} */ + +/** @defgroup mdb_put Write Flags + * @{ + */ +/** For put: Don't write if the key already exists. */ +#define MDB_NOOVERWRITE 0x10 +/** Only for #MDB_DUPSORT
+ * For put: don't write if the key and data pair already exist.
+ * For mdb_cursor_del: remove all duplicate data items. + */ +#define MDB_NODUPDATA 0x20 +/** For mdb_cursor_put: overwrite the current key/data pair */ +#define MDB_CURRENT 0x40 +/** For put: Just reserve space for data, don't copy it. Return a + * pointer to the reserved space. + */ +#define MDB_RESERVE 0x10000 +/** Data is being appended, don't split full pages. */ +#define MDB_APPEND 0x20000 +/** Duplicate data is being appended, don't split full pages. */ +#define MDB_APPENDDUP 0x40000 +/** Store multiple data items in one call. */ +#define MDB_MULTIPLE 0x80000 +/* @} */ + +/** @brief Cursor Get operations. + * + * This is the set of all operations for retrieving data + * using a cursor. + */ +typedef enum MDB_cursor_op { + MDB_FIRST, /**< Position at first key/data item */ + MDB_FIRST_DUP, /**< Position at first data item of current key. + Only for #MDB_DUPSORT */ + MDB_GET_BOTH, /**< Position at key/data pair. Only for #MDB_DUPSORT */ + MDB_GET_BOTH_RANGE, /**< position at key, nearest data. Only for #MDB_DUPSORT */ + MDB_GET_CURRENT, /**< Return key/data at current cursor position */ + MDB_GET_MULTIPLE, /**< Return all the duplicate data items at the current + cursor position. Only for #MDB_DUPFIXED */ + MDB_LAST, /**< Position at last key/data item */ + MDB_LAST_DUP, /**< Position at last data item of current key. + Only for #MDB_DUPSORT */ + MDB_NEXT, /**< Position at next data item */ + MDB_NEXT_DUP, /**< Position at next data item of current key. + Only for #MDB_DUPSORT */ + MDB_NEXT_MULTIPLE, /**< Return all duplicate data items at the next + cursor position. Only for #MDB_DUPFIXED */ + MDB_NEXT_NODUP, /**< Position at first data item of next key. + Only for #MDB_DUPSORT */ + MDB_PREV, /**< Position at previous data item */ + MDB_PREV_DUP, /**< Position at previous data item of current key. + Only for #MDB_DUPSORT */ + MDB_PREV_NODUP, /**< Position at last data item of previous key. + Only for #MDB_DUPSORT */ + MDB_SET, /**< Position at specified key */ + MDB_SET_KEY, /**< Position at specified key, return key + data */ + MDB_SET_RANGE /**< Position at first key greater than or equal to specified key. */ +} MDB_cursor_op; + +/** @defgroup errors Return Codes + * + * BerkeleyDB uses -30800 to -30999, we'll go under them + * @{ + */ + /** Successful result */ +#define MDB_SUCCESS 0 + /** key/data pair already exists */ +#define MDB_KEYEXIST (-30799) + /** key/data pair not found (EOF) */ +#define MDB_NOTFOUND (-30798) + /** Requested page not found - this usually indicates corruption */ +#define MDB_PAGE_NOTFOUND (-30797) + /** Located page was wrong type */ +#define MDB_CORRUPTED (-30796) + /** Update of meta page failed, probably I/O error */ +#define MDB_PANIC (-30795) + /** Environment version mismatch */ +#define MDB_VERSION_MISMATCH (-30794) + /** File is not a valid MDB file */ +#define MDB_INVALID (-30793) + /** Environment mapsize reached */ +#define MDB_MAP_FULL (-30792) + /** Environment maxdbs reached */ +#define MDB_DBS_FULL (-30791) + /** Environment maxreaders reached */ +#define MDB_READERS_FULL (-30790) + /** Too many TLS keys in use - Windows only */ +#define MDB_TLS_FULL (-30789) + /** Nested txn has too many dirty pages */ +#define MDB_TXN_FULL (-30788) + /** Cursor stack too deep - internal error */ +#define MDB_CURSOR_FULL (-30787) + /** Page has not enough space - internal error */ +#define MDB_PAGE_FULL (-30786) +#define MDB_LAST_ERRCODE MDB_PAGE_FULL +/** @} */ + +/** @brief Statistics for a database in the environment */ +typedef struct MDB_stat { + unsigned int ms_psize; /**< Size of a database page. + This is currently the same for all databases. */ + unsigned int ms_depth; /**< Depth (height) of the B-tree */ + size_t ms_branch_pages; /**< Number of internal (non-leaf) pages */ + size_t ms_leaf_pages; /**< Number of leaf pages */ + size_t ms_overflow_pages; /**< Number of overflow pages */ + size_t ms_entries; /**< Number of data items */ +} MDB_stat; + +/** @brief Information about the environment */ +typedef struct MDB_envinfo { + void *me_mapaddr; /**< Address of map, if fixed */ + size_t me_mapsize; /**< Size of the data memory map */ + size_t me_last_pgno; /**< ID of the last used page */ + size_t me_last_txnid; /**< ID of the last committed transaction */ + unsigned int me_maxreaders; /**< maximum number of threads for the environment */ + unsigned int me_numreaders; /**< maximum number of threads used in the environment */ +} MDB_envinfo; + + /** @brief Return the mdb library version information. + * + * @param[out] major if non-NULL, the library major version number is copied here + * @param[out] minor if non-NULL, the library minor version number is copied here + * @param[out] patch if non-NULL, the library patch version number is copied here + * @retval "version string" The library version as a string + */ +char *mdb_version(int *major, int *minor, int *patch); + + /** @brief Return a string describing a given error code. + * + * This function is a superset of the ANSI C X3.159-1989 (ANSI C) strerror(3) + * function. If the error code is greater than or equal to 0, then the string + * returned by the system function strerror(3) is returned. If the error code + * is less than 0, an error string corresponding to the MDB library error is + * returned. See @ref errors for a list of MDB-specific error codes. + * @param[in] err The error code + * @retval "error message" The description of the error + */ +char *mdb_strerror(int err); + + /** @brief Create an MDB environment handle. + * + * This function allocates memory for a #MDB_env structure. To release + * the allocated memory and discard the handle, call #mdb_env_close(). + * Before the handle may be used, it must be opened using #mdb_env_open(). + * Various other options may also need to be set before opening the handle, + * e.g. #mdb_env_set_mapsize(), #mdb_env_set_maxreaders(), #mdb_env_set_maxdbs(), + * depending on usage requirements. + * @param[out] env The address where the new handle will be stored + * @return A non-zero error value on failure and 0 on success. + */ +int mdb_env_create(MDB_env **env); + + /** @brief Open an environment handle. + * + * If this function fails, #mdb_env_close() must be called to discard the #MDB_env handle. + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[in] path The directory in which the database files reside. This + * directory must already exist and be writable. + * @param[in] flags Special options for this environment. This parameter + * must be set to 0 or by bitwise OR'ing together one or more of the + * values described here. + * Flags set by mdb_env_set_flags() are also used. + *
    + *
  • #MDB_FIXEDMAP + * use a fixed address for the mmap region. This flag must be specified + * when creating the environment, and is stored persistently in the environment. + * If successful, the memory map will always reside at the same virtual address + * and pointers used to reference data items in the database will be constant + * across multiple invocations. This option may not always work, depending on + * how the operating system has allocated memory to shared libraries and other uses. + * The feature is highly experimental. + *
  • #MDB_NOSUBDIR + * By default, MDB creates its environment in a directory whose + * pathname is given in \b path, and creates its data and lock files + * under that directory. With this option, \b path is used as-is for + * the database main data file. The database lock file is the \b path + * with "-lock" appended. + *
  • #MDB_NOSYNC + * Don't perform a synchronous flush after committing a transaction. This means + * transactions will exhibit the ACI (atomicity, consistency, and isolation) + * properties, but not D (durability); that is database integrity will be + * maintained but it is possible some number of the most recently committed + * transactions may be undone after a system crash. The number of transactions + * at risk is governed by how often the system flushes dirty buffers to disk + * and how often #mdb_env_sync() is called. This flag may be changed + * at any time using #mdb_env_set_flags(). + *
  • #MDB_NOMETASYNC + * Don't perform a synchronous flush of the meta page after committing + * a transaction. This is similar to the #MDB_NOSYNC case, but safer + * because the transaction data is still flushed. The meta page for any + * transaction N will be flushed by the data flush of transaction N+1. + * In case of a system crash, the last committed transaction may be + * lost. This flag may be changed at any time using #mdb_env_set_flags(). + *
  • #MDB_RDONLY + * Open the environment in read-only mode. No write operations will be allowed. + *
+ * @param[in] mode The UNIX permissions to set on created files. This parameter + * is ignored on Windows. + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • #MDB_VERSION_MISMATCH - the version of the MDB library doesn't match the + * version that created the database environment. + *
  • EINVAL - the environment file headers are corrupted. + *
  • ENOENT - the directory specified by the path parameter doesn't exist. + *
  • EACCES - the user didn't have permission to access the environment files. + *
  • EAGAIN - the environment was locked by another process. + *
+ */ +int mdb_env_open(MDB_env *env, const char *path, unsigned int flags, mode_t mode); + + /** @brief Copy an MDB environment to the specified path. + * + * This function may be used to make a backup of an existing environment. + * @param[in] env An environment handle returned by #mdb_env_create(). It + * must have already been opened successfully. + * @param[in] path The directory in which the copy will reside. This + * directory must already exist and be writable but must otherwise be + * empty. + * @return A non-zero error value on failure and 0 on success. + */ +int mdb_env_copy(MDB_env *env, const char *path); + + /** @brief Return statistics about the MDB environment. + * + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[out] stat The address of an #MDB_stat structure + * where the statistics will be copied + */ +int mdb_env_stat(MDB_env *env, MDB_stat *stat); + + /** @brief Return information about the MDB environment. + * + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[out] stat The address of an #MDB_envinfo structure + * where the information will be copied + */ +int mdb_env_info(MDB_env *env, MDB_envinfo *stat); + + /** @brief Flush the data buffers to disk. + * + * Data is always written to disk when #mdb_txn_commit() is called, + * but the operating system may keep it buffered. MDB always flushes + * the OS buffers upon commit as well, unless the environment was + * opened with #MDB_NOSYNC. + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[in] force If non-zero, force a synchronous flush. Otherwise + * if the environment has the #MDB_NOSYNC flag set the flushes + * will be omitted, and with #MDB_MAPASYNC they will be asynchronous. + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
  • EIO - an error occurred during synchronization. + *
+ */ +int mdb_env_sync(MDB_env *env, int force); + + /** @brief Close the environment and release the memory map. + * + * Only a single thread may call this function. All transactions, databases, + * and cursors must already be closed before calling this function. Attempts to + * use any such handles after calling this function will cause a SIGSEGV. + * The environment handle will be freed and must not be used again after this call. + * @param[in] env An environment handle returned by #mdb_env_create() + */ +void mdb_env_close(MDB_env *env); + + /** @brief Set environment flags. + * + * This may be used to set some flags in addition to those from + * #mdb_env_open(), or to unset these flags. + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[in] flags The flags to change, bitwise OR'ed together + * @param[in] onoff A non-zero value sets the flags, zero clears them. + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_env_set_flags(MDB_env *env, unsigned int flags, int onoff); + + /** @brief Get environment flags. + * + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[out] flags The address of an integer to store the flags + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_env_get_flags(MDB_env *env, unsigned int *flags); + + /** @brief Return the path that was used in #mdb_env_open(). + * + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[out] path Address of a string pointer to contain the path. This + * is the actual string in the environment, not a copy. It should not be + * altered in any way. + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_env_get_path(MDB_env *env, const char **path); + + /** @brief Set the size of the memory map to use for this environment. + * + * The size should be a multiple of the OS page size. The default is + * 10485760 bytes. The size of the memory map is also the maximum size + * of the database. The value should be chosen as large as possible, + * to accommodate future growth of the database. + * This function may only be called after #mdb_env_create() and before #mdb_env_open(). + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[in] size The size in bytes + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified, or the environment is already open. + *
+ */ +int mdb_env_set_mapsize(MDB_env *env, size_t size); + + /** @brief Set the maximum number of threads for the environment. + * + * This defines the number of slots in the lock table that is used to track readers in the + * the environment. The default is 126. + * This function may only be called after #mdb_env_create() and before #mdb_env_open(). + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[in] readers The maximum number of threads + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified, or the environment is already open. + *
+ */ +int mdb_env_set_maxreaders(MDB_env *env, unsigned int readers); + + /** @brief Get the maximum number of threads for the environment. + * + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[out] readers Address of an integer to store the number of readers + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_env_get_maxreaders(MDB_env *env, unsigned int *readers); + + /** @brief Set the maximum number of named databases for the environment. + * + * This function is only needed if multiple databases will be used in the + * environment. Simpler applications that use the environment as a single + * unnamed database can ignore this option. + * This function may only be called after #mdb_env_create() and before #mdb_env_open(). + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[in] dbs The maximum number of databases + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified, or the environment is already open. + *
+ */ +int mdb_env_set_maxdbs(MDB_env *env, MDB_dbi dbs); + + /** @brief Create a transaction for use with the environment. + * + * The transaction handle may be discarded using #mdb_txn_abort() or #mdb_txn_commit(). + * @note Transactions may not span threads; a transaction must only be used by a + * single thread. Also, a thread may only have a single transaction. + * @note Cursors may not span transactions; each cursor must be opened and closed + * within a single transaction. + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[in] parent If this parameter is non-NULL, the new transaction + * will be a nested transaction, with the transaction indicated by \b parent + * as its parent. Transactions may be nested to any level. A parent + * transaction may not issue any other operations besides mdb_txn_begin, + * mdb_txn_abort, or mdb_txn_commit while it has active child transactions. + * @param[in] flags Special options for this transaction. This parameter + * must be set to 0 or by bitwise OR'ing together one or more of the + * values described here. + *
    + *
  • #MDB_RDONLY + * This transaction will not perform any write operations. + *
+ * @param[out] txn Address where the new #MDB_txn handle will be stored + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • #MDB_PANIC - a fatal error occurred earlier and the environment + * must be shut down. + *
  • ENOMEM - out of memory, or a read-only transaction was requested and + * the reader lock table is full. See #mdb_env_set_maxreaders(). + *
+ */ +int mdb_txn_begin(MDB_env *env, MDB_txn *parent, unsigned int flags, MDB_txn **txn); + + /** @brief Commit all the operations of a transaction into the database. + * + * All cursors opened within the transaction will be closed by this call. The cursors + * and transaction handle will be freed and must not be used again after this call. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
  • ENOSPC - no more disk space. + *
  • EIO - a low-level I/O error occurred while writing. + *
  • ENOMEM - the transaction is nested and could not be merged into its parent. + *
+ */ +int mdb_txn_commit(MDB_txn *txn); + + /** @brief Abandon all the operations of the transaction instead of saving them. + * + * All cursors opened within the transaction will be closed by this call. The cursors + * and transaction handle will be freed and must not be used again after this call. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + */ +void mdb_txn_abort(MDB_txn *txn); + + /** @brief Reset a read-only transaction. + * + * This releases the current reader lock but doesn't free the + * transaction handle, allowing it to be used again later by #mdb_txn_renew(). + * It otherwise has the same effect as #mdb_txn_abort() but saves some memory + * allocation/deallocation overhead if a thread is going to start a new + * read-only transaction again soon. + * All cursors opened within the transaction must be closed before the transaction + * is reset. + * Reader locks generally don't interfere with writers, but they keep old + * versions of database pages allocated. Thus they prevent the old pages + * from being reused when writers commit new data, and so under heavy load + * the database size may grow much more rapidly than otherwise. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + */ +void mdb_txn_reset(MDB_txn *txn); + + /** @brief Renew a read-only transaction. + * + * This acquires a new reader lock for a transaction handle that had been + * released by #mdb_txn_reset(). It must be called before a reset transaction + * may be used again. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • #MDB_PANIC - a fatal error occurred earlier and the environment + * must be shut down. + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_txn_renew(MDB_txn *txn); + + /** @brief Open a database in the environment. + * + * The database handle may be discarded by calling #mdb_close(). The + * database handle resides in the shared environment, it is not owned + * by the given transaction. Only one thread should call this function; + * it is not mutex-protected in a read-only transaction. + * To use named databases (with name != NULL), #mdb_env_set_maxdbs() + * must be called before opening the enviorment. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] name The name of the database to open. If only a single + * database is needed in the environment, this value may be NULL. + * @param[in] flags Special options for this database. This parameter + * must be set to 0 or by bitwise OR'ing together one or more of the + * values described here. + *
    + *
  • #MDB_REVERSEKEY + * Keys are strings to be compared in reverse order, from the end + * of the strings to the beginning. By default, Keys are treated as strings and + * compared from beginning to end. + *
  • #MDB_DUPSORT + * Duplicate keys may be used in the database. (Or, from another perspective, + * keys may have multiple data items, stored in sorted order.) By default + * keys must be unique and may have only a single data item. + *
  • #MDB_INTEGERKEY + * Keys are binary integers in native byte order. Setting this option + * requires all keys to be the same size, typically sizeof(int) + * or sizeof(size_t). + *
  • #MDB_DUPFIXED + * This flag may only be used in combination with #MDB_DUPSORT. This option + * tells the library that the data items for this database are all the same + * size, which allows further optimizations in storage and retrieval. When + * all data items are the same size, the #MDB_GET_MULTIPLE and #MDB_NEXT_MULTIPLE + * cursor operations may be used to retrieve multiple items at once. + *
  • #MDB_INTEGERDUP + * This option specifies that duplicate data items are also integers, and + * should be sorted as such. + *
  • #MDB_REVERSEDUP + * This option specifies that duplicate data items should be compared as + * strings in reverse order. + *
  • #MDB_CREATE + * Create the named database if it doesn't exist. This option is not + * allowed in a read-only transaction or a read-only environment. + *
+ * @param[out] dbi Address where the new #MDB_dbi handle will be stored + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • #MDB_NOTFOUND - the specified database doesn't exist in the environment + * and #MDB_CREATE was not specified. + *
  • ENFILE - too many databases have been opened. See #mdb_env_set_maxdbs(). + *
+ */ +int mdb_open(MDB_txn *txn, const char *name, unsigned int flags, MDB_dbi *dbi); + + /** @brief Retrieve statistics for a database. + * + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[out] stat The address of an #MDB_stat structure + * where the statistics will be copied + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_stat(MDB_txn *txn, MDB_dbi dbi, MDB_stat *stat); + + /** @brief Close a database handle. + * + * This call is not mutex protected. Handles should only be closed by + * a single thread, and only if no other threads are going to reference + * the database handle any further. + * @param[in] env An environment handle returned by #mdb_env_create() + * @param[in] dbi A database handle returned by #mdb_open() + */ +void mdb_close(MDB_env *env, MDB_dbi dbi); + + /** @brief Delete a database and/or free all its pages. + * + * If the \b del parameter is 1, the DB handle will be closed + * and the DB will be deleted. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] del 1 to delete the DB from the environment, + * 0 to just free its pages. + * @return A non-zero error value on failure and 0 on success. + */ +int mdb_drop(MDB_txn *txn, MDB_dbi dbi, int del); + + /** @brief Set a custom key comparison function for a database. + * + * The comparison function is called whenever it is necessary to compare a + * key specified by the application with a key currently stored in the database. + * If no comparison function is specified, and no special key flags were specified + * with #mdb_open(), the keys are compared lexically, with shorter keys collating + * before longer keys. + * @warning This function must be called before any data access functions are used, + * otherwise data corruption may occur. The same comparison function must be used by every + * program accessing the database, every time the database is used. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] cmp A #MDB_cmp_func function + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_set_compare(MDB_txn *txn, MDB_dbi dbi, MDB_cmp_func *cmp); + + /** @brief Set a custom data comparison function for a #MDB_DUPSORT database. + * + * This comparison function is called whenever it is necessary to compare a data + * item specified by the application with a data item currently stored in the database. + * This function only takes effect if the database was opened with the #MDB_DUPSORT + * flag. + * If no comparison function is specified, and no special key flags were specified + * with #mdb_open(), the data items are compared lexically, with shorter items collating + * before longer items. + * @warning This function must be called before any data access functions are used, + * otherwise data corruption may occur. The same comparison function must be used by every + * program accessing the database, every time the database is used. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] cmp A #MDB_cmp_func function + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_set_dupsort(MDB_txn *txn, MDB_dbi dbi, MDB_cmp_func *cmp); + + /** @brief Set a relocation function for a #MDB_FIXEDMAP database. + * + * @todo The relocation function is called whenever it is necessary to move the data + * of an item to a different position in the database (e.g. through tree + * balancing operations, shifts as a result of adds or deletes, etc.). It is + * intended to allow address/position-dependent data items to be stored in + * a database in an environment opened with the #MDB_FIXEDMAP option. + * Currently the relocation feature is unimplemented and setting + * this function has no effect. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] rel A #MDB_rel_func function + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_set_relfunc(MDB_txn *txn, MDB_dbi dbi, MDB_rel_func *rel); + + /** @brief Set a context pointer for a #MDB_FIXEDMAP database's relocation function. + * + * See #mdb_set_relfunc and #MDB_rel_func for more details. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] ctx An arbitrary pointer for whatever the application needs. + * It will be passed to the callback function set by #mdb_set_relfunc + * as its \b relctx parameter whenever the callback is invoked. + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_set_relctx(MDB_txn *txn, MDB_dbi dbi, void *ctx); + + /** @brief Get items from a database. + * + * This function retrieves key/data pairs from the database. The address + * and length of the data associated with the specified \b key are returned + * in the structure to which \b data refers. + * If the database supports duplicate keys (#MDB_DUPSORT) then the + * first data item for the key will be returned. Retrieval of other + * items requires the use of #mdb_cursor_get(). + * + * @note The memory pointed to by the returned values is owned by the + * database. The caller need not dispose of the memory, and may not + * modify it in any way. For values returned in a read-only transaction + * any modification attempts will cause a SIGSEGV. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] key The key to search for in the database + * @param[out] data The data corresponding to the key + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • #MDB_NOTFOUND - the key was not in the database. + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_get(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data); + + /** @brief Store items into a database. + * + * This function stores key/data pairs in the database. The default behavior + * is to enter the new key/data pair, replacing any previously existing key + * if duplicates are disallowed, or adding a duplicate data item if + * duplicates are allowed (#MDB_DUPSORT). + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] key The key to store in the database + * @param[in,out] data The data to store + * @param[in] flags Special options for this operation. This parameter + * must be set to 0 or by bitwise OR'ing together one or more of the + * values described here. + *
    + *
  • #MDB_NODUPDATA - enter the new key/data pair only if it does not + * already appear in the database. This flag may only be specified + * if the database was opened with #MDB_DUPSORT. The function will + * return #MDB_KEYEXIST if the key/data pair already appears in the + * database. + *
  • #MDB_NOOVERWRITE - enter the new key/data pair only if the key + * does not already appear in the database. The function will return + * #MDB_KEYEXIST if the key already appears in the database, even if + * the database supports duplicates (#MDB_DUPSORT). The \b data + * parameter will be set to point to the existing item. + *
  • #MDB_RESERVE - reserve space for data of the given size, but + * don't copy the given data. Instead, return a pointer to the + * reserved space, which the caller can fill in later. This saves + * an extra memcpy if the data is being generated later. + *
  • #MDB_APPEND - append the given key/data pair to the end of the + * database. No key comparisons are performed. This option allows + * fast bulk loading when keys are already known to be in the + * correct order. Loading unsorted keys with this flag will cause + * data corruption. + *
  • #MDB_APPENDDUP - as above, but for sorted dup data. + *
+ * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EACCES - an attempt was made to write in a read-only transaction. + *
  • EINVAL - an invalid parameter was specified. + *
  • ENOMEM - the database is full, see #mdb_env_set_mapsize(). + *
+ */ +int mdb_put(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data, + unsigned int flags); + + /** @brief Delete items from a database. + * + * This function removes key/data pairs from the database. + * If the database does not support sorted duplicate data items + * (#MDB_DUPSORT) the data parameter is ignored. + * If the database supports sorted duplicates and the data parameter + * is NULL, all of the duplicate data items for the key will be + * deleted. Otherwise, if the data parameter is non-NULL + * only the matching data item will be deleted. + * This function will return #MDB_NOTFOUND if the specified key/data + * pair is not in the database. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] key The key to delete from the database + * @param[in] data The data to delete + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EACCES - an attempt was made to write in a read-only transaction. + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_del(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data); + + /** @brief Create a cursor handle. + * + * Cursors are associated with a specific transaction and database and + * may not span threads. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[out] cursor Address where the new #MDB_cursor handle will be stored + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_cursor_open(MDB_txn *txn, MDB_dbi dbi, MDB_cursor **cursor); + + /** @brief Close a cursor handle. + * + * The cursor handle will be freed and must not be used again after this call. + * @param[in] cursor A cursor handle returned by #mdb_cursor_open() + */ +void mdb_cursor_close(MDB_cursor *cursor); + + /** @brief Renew a cursor handle. + * + * Cursors are associated with a specific transaction and database and + * may not span threads. Cursors that are only used in read-only + * transactions may be re-used, to avoid unnecessary malloc/free overhead. + * The cursor may be associated with a new read-only transaction, and + * referencing the same database handle as it was created with. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] cursor A cursor handle returned by #mdb_cursor_open() + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_cursor_renew(MDB_txn *txn, MDB_cursor *cursor); + + /** @brief Return the cursor's transaction handle. + * + * @param[in] cursor A cursor handle returned by #mdb_cursor_open() + */ +MDB_txn *mdb_cursor_txn(MDB_cursor *cursor); + + /** @brief Return the cursor's database handle. + * + * @param[in] cursor A cursor handle returned by #mdb_cursor_open() + */ +MDB_dbi mdb_cursor_dbi(MDB_cursor *cursor); + + /** @brief Retrieve by cursor. + * + * This function retrieves key/data pairs from the database. The address and length + * of the key are returned in the object to which \b key refers (except for the + * case of the #MDB_SET option, in which the \b key object is unchanged), and + * the address and length of the data are returned in the object to which \b data + * refers. + * @param[in] cursor A cursor handle returned by #mdb_cursor_open() + * @param[in,out] key The key for a retrieved item + * @param[in,out] data The data of a retrieved item + * @param[in] op A cursor operation #MDB_cursor_op + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • #MDB_NOTFOUND - no matching key found. + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_cursor_get(MDB_cursor *cursor, MDB_val *key, MDB_val *data, + MDB_cursor_op op); + + /** @brief Store by cursor. + * + * This function stores key/data pairs into the database. + * If the function fails for any reason, the state of the cursor will be + * unchanged. If the function succeeds and an item is inserted into the + * database, the cursor is always positioned to refer to the newly inserted item. + * @param[in] cursor A cursor handle returned by #mdb_cursor_open() + * @param[in] key The key operated on. + * @param[in] data The data operated on. + * @param[in] flags Options for this operation. This parameter + * must be set to 0 or one of the values described here. + *
    + *
  • #MDB_CURRENT - overwrite the data of the key/data pair to which + * the cursor refers with the specified data item. The \b key + * parameter is ignored. + *
  • #MDB_NODUPDATA - enter the new key/data pair only if it does not + * already appear in the database. This flag may only be specified + * if the database was opened with #MDB_DUPSORT. The function will + * return #MDB_KEYEXIST if the key/data pair already appears in the + * database. + *
  • #MDB_NOOVERWRITE - enter the new key/data pair only if the key + * does not already appear in the database. The function will return + * #MDB_KEYEXIST if the key already appears in the database, even if + * the database supports duplicates (#MDB_DUPSORT). + *
  • #MDB_RESERVE - reserve space for data of the given size, but + * don't copy the given data. Instead, return a pointer to the + * reserved space, which the caller can fill in later. This saves + * an extra memcpy if the data is being generated later. + *
  • #MDB_APPEND - append the given key/data pair to the end of the + * database. No key comparisons are performed. This option allows + * fast bulk loading when keys are already known to be in the + * correct order. Loading unsorted keys with this flag will cause + * data corruption. + *
  • #MDB_APPENDDUP - as above, but for sorted dup data. + *
+ * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EACCES - an attempt was made to modify a read-only database. + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_cursor_put(MDB_cursor *cursor, MDB_val *key, MDB_val *data, + unsigned int flags); + + /** @brief Delete current key/data pair + * + * This function deletes the key/data pair to which the cursor refers. + * @param[in] cursor A cursor handle returned by #mdb_cursor_open() + * @param[in] flags Options for this operation. This parameter + * must be set to 0 or one of the values described here. + *
    + *
  • #MDB_NODUPDATA - delete all of the data items for the current key. + * This flag may only be specified if the database was opened with #MDB_DUPSORT. + *
+ * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EACCES - an attempt was made to modify a read-only database. + *
  • EINVAL - an invalid parameter was specified. + *
+ */ +int mdb_cursor_del(MDB_cursor *cursor, unsigned int flags); + + /** @brief Return count of duplicates for current key. + * + * This call is only valid on databases that support sorted duplicate + * data items #MDB_DUPSORT. + * @param[in] cursor A cursor handle returned by #mdb_cursor_open() + * @param[out] countp Address where the count will be stored + * @return A non-zero error value on failure and 0 on success. Some possible + * errors are: + *
    + *
  • EINVAL - cursor is not initialized, or an invalid parameter was specified. + *
+ */ +int mdb_cursor_count(MDB_cursor *cursor, size_t *countp); + + /** @brief Compare two data items according to a particular database. + * + * This returns a comparison as if the two data items were keys in the + * specified database. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] a The first item to compare + * @param[in] b The second item to compare + * @return < 0 if a < b, 0 if a == b, > 0 if a > b + */ +int mdb_cmp(MDB_txn *txn, MDB_dbi dbi, const MDB_val *a, const MDB_val *b); + + /** @brief Compare two data items according to a particular database. + * + * This returns a comparison as if the two items were data items of + * a sorted duplicates #MDB_DUPSORT database. + * @param[in] txn A transaction handle returned by #mdb_txn_begin() + * @param[in] dbi A database handle returned by #mdb_open() + * @param[in] a The first item to compare + * @param[in] b The second item to compare + * @return < 0 if a < b, 0 if a == b, > 0 if a > b + */ +int mdb_dcmp(MDB_txn *txn, MDB_dbi dbi, const MDB_val *a, const MDB_val *b); +/** @} */ + +#ifdef __cplusplus +} +#endif +#endif /* _LMDB_H_ */ diff --git a/libraries/libmdb/mdb.c b/libraries/libmdb/mdb.c index 117b40230a..61c948cc9b 100644 --- a/libraries/libmdb/mdb.c +++ b/libraries/libmdb/mdb.c @@ -117,7 +117,7 @@ #define MISALIGNED_OK 1 #endif -#include "mdb.h" +#include "lmdb.h" #include "midl.h" #if (BYTE_ORDER == LITTLE_ENDIAN) == (BYTE_ORDER == BIG_ENDIAN) diff --git a/libraries/libmdb/mdb.h b/libraries/libmdb/mdb.h deleted file mode 100644 index 784c5ee0ad..0000000000 --- a/libraries/libmdb/mdb.h +++ /dev/null @@ -1,1163 +0,0 @@ -/** @file mdb.h - * @brief memory-mapped database library - * - * @mainpage MDB Memory-Mapped Database Manager - * - * @section intro_sec Introduction - * MDB is a Btree-based database management library modeled loosely on the - * BerkeleyDB API, but much simplified. The entire database is exposed - * in a memory map, and all data fetches return data directly - * from the mapped memory, so no malloc's or memcpy's occur during - * data fetches. As such, the library is extremely simple because it - * requires no page caching layer of its own, and it is extremely high - * performance and memory-efficient. It is also fully transactional with - * full ACID semantics, and when the memory map is read-only, the - * database integrity cannot be corrupted by stray pointer writes from - * application code. - * - * The library is fully thread-aware and supports concurrent read/write - * access from multiple processes and threads. Data pages use a copy-on- - * write strategy so no active data pages are ever overwritten, which - * also provides resistance to corruption and eliminates the need of any - * special recovery procedures after a system crash. Writes are fully - * serialized; only one write transaction may be active at a time, which - * guarantees that writers can never deadlock. The database structure is - * multi-versioned so readers run with no locks; writers cannot block - * readers, and readers don't block writers. - * - * Unlike other well-known database mechanisms which use either write-ahead - * transaction logs or append-only data writes, MDB requires no maintenance - * during operation. Both write-ahead loggers and append-only databases - * require periodic checkpointing and/or compaction of their log or database - * files otherwise they grow without bound. MDB tracks free pages within - * the database and re-uses them for new write operations, so the database - * size does not grow without bound in normal use. - * - * The memory map can be used as a read-only or read-write map. It is - * read-only by default as this provides total immunity to corruption. - * Using read-write mode offers much higher write performance, but adds - * the possibility for stray application writes thru pointers to silently - * corrupt the database. Of course if your application code is known to - * be bug-free (...) then this is not an issue. - * - * @section caveats_sec Caveats - * Troubleshooting the lock file, plus semaphores on BSD systems: - * - * - A broken lockfile can cause sync issues. - * Stale reader transactions left behind by an aborted program - * cause further writes to grow the database quickly, and - * stale locks can block further operation. - * - * Fix: Terminate all programs using the database, or make - * them close it. Next database user will reset the lockfile. - * - * - On BSD systems or others configured with MDB_USE_POSIX_SEM, - * startup can fail due to semaphores owned by another userid. - * - * Fix: Open and close the database as the user which owns the - * semaphores (likely last user) or as root, while no other - * process is using the database. - * - * Restrictions/caveats (in addition to those listed for some functions): - * - * - Only the database owner should normally use the database on - * BSD systems or when otherwise configured with MDB_USE_POSIX_SEM. - * Multiple users can cause startup to fail later, as noted above. - * - * - A thread can only use one transaction at a time, plus any child - * transactions. Each transaction belongs to one thread. See below. - * - * - Use an MDB_env* in the process which opened it, without fork()ing. - * - * - Do not have open an MDB database twice in the same process at - * the same time. Not even from a plain open() call - close()ing it - * breaks flock() advisory locking. - * - * - Avoid long-lived transactions. Read transactions prevent - * reuse of pages freed by newer write transactions, thus the - * database can grow quickly. Write transactions prevent - * other write transactions, since writes are serialized. - * - * ...when several processes can use a database concurrently: - * - * - Avoid suspending a process with active transactions. These - * would then be "long-lived" as above. - * - * - Avoid aborting a process with an active transaction. - * The transaction becomes "long-lived" as above until the lockfile - * is reset, since the process may not remove it from the lockfile. - * - * - If you do that anyway, close the environment once in a while, - * so the lockfile can get reset. - * - * - Do not use MDB databases on remote filesystems, even between - * processes on the same host. This breaks flock() on some OSes, - * possibly memory map sync, and certainly sync between programs - * on different hosts. - * - * - Opening a database can fail if another process is opening or - * closing it at exactly the same time. - * - * @author Howard Chu, Symas Corporation. - * - * @copyright Copyright 2011-2012 Howard Chu, Symas Corp. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted only as authorized by the OpenLDAP - * Public License. - * - * A copy of this license is available in the file LICENSE in the - * top-level directory of the distribution or, alternatively, at - * . - * - * @par Derived From: - * This code is derived from btree.c written by Martin Hedenfalk. - * - * Copyright (c) 2009, 2010 Martin Hedenfalk - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ -#ifndef _MDB_H_ -#define _MDB_H_ - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/** @defgroup mdb MDB API - * @{ - * @brief OpenLDAP Memory-Mapped Database Manager - */ -/** @defgroup Version Version Macros - * @{ - */ -/** Library major version */ -#define MDB_VERSION_MAJOR 0 -/** Library minor version */ -#define MDB_VERSION_MINOR 9 -/** Library patch version */ -#define MDB_VERSION_PATCH 4 - -/** Combine args a,b,c into a single integer for easy version comparisons */ -#define MDB_VERINT(a,b,c) (((a) << 24) | ((b) << 16) | (c)) - -/** The full library version as a single integer */ -#define MDB_VERSION_FULL \ - MDB_VERINT(MDB_VERSION_MAJOR,MDB_VERSION_MINOR,MDB_VERSION_PATCH) - -/** The release date of this library version */ -#define MDB_VERSION_DATE "September 14, 2012" - -/** A stringifier for the version info */ -#define MDB_VERSTR(a,b,c,d) "MDB " #a "." #b "." #c ": (" d ")" - -/** A helper for the stringifier macro */ -#define MDB_VERFOO(a,b,c,d) MDB_VERSTR(a,b,c,d) - -/** The full library version as a C string */ -#define MDB_VERSION_STRING \ - MDB_VERFOO(MDB_VERSION_MAJOR,MDB_VERSION_MINOR,MDB_VERSION_PATCH,MDB_VERSION_DATE) -/** @} */ - -/** @brief Opaque structure for a database environment. - * - * A DB environment supports multiple databases, all residing in the same - * shared-memory map. - */ -typedef struct MDB_env MDB_env; - -/** @brief Opaque structure for a transaction handle. - * - * All database operations require a transaction handle. Transactions may be - * read-only or read-write. - */ -typedef struct MDB_txn MDB_txn; - -/** @brief A handle for an individual database in the DB environment. */ -typedef unsigned int MDB_dbi; - -/** @brief Opaque structure for navigating through a database */ -typedef struct MDB_cursor MDB_cursor; - -/** @brief Generic structure used for passing keys and data in and out of the database. */ -typedef struct MDB_val { - size_t mv_size; /**< size of the data item */ - void *mv_data; /**< address of the data item */ -} MDB_val; - -/** @brief A callback function used to compare two keys in a database */ -typedef int (MDB_cmp_func)(const MDB_val *a, const MDB_val *b); - -/** @brief A callback function used to relocate a position-dependent data item - * in a fixed-address database. - * - * The \b newptr gives the item's desired address in - * the memory map, and \b oldptr gives its previous address. The item's actual - * data resides at the address in \b item. This callback is expected to walk - * through the fields of the record in \b item and modify any - * values based at the \b oldptr address to be relative to the \b newptr address. - * @param[in,out] item The item that is to be relocated. - * @param[in] oldptr The previous address. - * @param[in] newptr The new address to relocate to. - * @param[in] relctx An application-provided context, set by #mdb_set_relctx(). - * @todo This feature is currently unimplemented. - */ -typedef void (MDB_rel_func)(MDB_val *item, void *oldptr, void *newptr, void *relctx); - -/** @defgroup mdb_env Environment Flags - * - * Values do not overlap Database Flags. - * @{ - */ - /** mmap at a fixed address */ -#define MDB_FIXEDMAP 0x01 - /** no environment directory */ -#define MDB_NOSUBDIR 0x4000 - /** don't fsync after commit */ -#define MDB_NOSYNC 0x10000 - /** read only */ -#define MDB_RDONLY 0x20000 - /** don't fsync metapage after commit */ -#define MDB_NOMETASYNC 0x40000 - /** use writable mmap */ -#define MDB_WRITEMAP 0x80000 - /** use asynchronous msync */ -#define MDB_MAPASYNC 0x100000 -/** @} */ - -/** @defgroup mdb_open Database Flags - * - * Values do not overlap Environment Flags. - * @{ - */ - /** use reverse string keys */ -#define MDB_REVERSEKEY 0x02 - /** use sorted duplicates */ -#define MDB_DUPSORT 0x04 - /** numeric keys in native byte order. - * The keys must all be of the same size. */ -#define MDB_INTEGERKEY 0x08 - /** with #MDB_DUPSORT, sorted dup items have fixed size */ -#define MDB_DUPFIXED 0x10 - /** with #MDB_DUPSORT, dups are numeric in native byte order */ -#define MDB_INTEGERDUP 0x20 - /** with #MDB_DUPSORT, use reverse string dups */ -#define MDB_REVERSEDUP 0x40 - /** create DB if not already existing */ -#define MDB_CREATE 0x40000 -/** @} */ - -/** @defgroup mdb_put Write Flags - * @{ - */ -/** For put: Don't write if the key already exists. */ -#define MDB_NOOVERWRITE 0x10 -/** Only for #MDB_DUPSORT
- * For put: don't write if the key and data pair already exist.
- * For mdb_cursor_del: remove all duplicate data items. - */ -#define MDB_NODUPDATA 0x20 -/** For mdb_cursor_put: overwrite the current key/data pair */ -#define MDB_CURRENT 0x40 -/** For put: Just reserve space for data, don't copy it. Return a - * pointer to the reserved space. - */ -#define MDB_RESERVE 0x10000 -/** Data is being appended, don't split full pages. */ -#define MDB_APPEND 0x20000 -/** Duplicate data is being appended, don't split full pages. */ -#define MDB_APPENDDUP 0x40000 -/** Store multiple data items in one call. */ -#define MDB_MULTIPLE 0x80000 -/* @} */ - -/** @brief Cursor Get operations. - * - * This is the set of all operations for retrieving data - * using a cursor. - */ -typedef enum MDB_cursor_op { - MDB_FIRST, /**< Position at first key/data item */ - MDB_FIRST_DUP, /**< Position at first data item of current key. - Only for #MDB_DUPSORT */ - MDB_GET_BOTH, /**< Position at key/data pair. Only for #MDB_DUPSORT */ - MDB_GET_BOTH_RANGE, /**< position at key, nearest data. Only for #MDB_DUPSORT */ - MDB_GET_CURRENT, /**< Return key/data at current cursor position */ - MDB_GET_MULTIPLE, /**< Return all the duplicate data items at the current - cursor position. Only for #MDB_DUPFIXED */ - MDB_LAST, /**< Position at last key/data item */ - MDB_LAST_DUP, /**< Position at last data item of current key. - Only for #MDB_DUPSORT */ - MDB_NEXT, /**< Position at next data item */ - MDB_NEXT_DUP, /**< Position at next data item of current key. - Only for #MDB_DUPSORT */ - MDB_NEXT_MULTIPLE, /**< Return all duplicate data items at the next - cursor position. Only for #MDB_DUPFIXED */ - MDB_NEXT_NODUP, /**< Position at first data item of next key. - Only for #MDB_DUPSORT */ - MDB_PREV, /**< Position at previous data item */ - MDB_PREV_DUP, /**< Position at previous data item of current key. - Only for #MDB_DUPSORT */ - MDB_PREV_NODUP, /**< Position at last data item of previous key. - Only for #MDB_DUPSORT */ - MDB_SET, /**< Position at specified key */ - MDB_SET_KEY, /**< Position at specified key, return key + data */ - MDB_SET_RANGE /**< Position at first key greater than or equal to specified key. */ -} MDB_cursor_op; - -/** @defgroup errors Return Codes - * - * BerkeleyDB uses -30800 to -30999, we'll go under them - * @{ - */ - /** Successful result */ -#define MDB_SUCCESS 0 - /** key/data pair already exists */ -#define MDB_KEYEXIST (-30799) - /** key/data pair not found (EOF) */ -#define MDB_NOTFOUND (-30798) - /** Requested page not found - this usually indicates corruption */ -#define MDB_PAGE_NOTFOUND (-30797) - /** Located page was wrong type */ -#define MDB_CORRUPTED (-30796) - /** Update of meta page failed, probably I/O error */ -#define MDB_PANIC (-30795) - /** Environment version mismatch */ -#define MDB_VERSION_MISMATCH (-30794) - /** File is not a valid MDB file */ -#define MDB_INVALID (-30793) - /** Environment mapsize reached */ -#define MDB_MAP_FULL (-30792) - /** Environment maxdbs reached */ -#define MDB_DBS_FULL (-30791) - /** Environment maxreaders reached */ -#define MDB_READERS_FULL (-30790) - /** Too many TLS keys in use - Windows only */ -#define MDB_TLS_FULL (-30789) - /** Nested txn has too many dirty pages */ -#define MDB_TXN_FULL (-30788) - /** Cursor stack too deep - internal error */ -#define MDB_CURSOR_FULL (-30787) - /** Page has not enough space - internal error */ -#define MDB_PAGE_FULL (-30786) -#define MDB_LAST_ERRCODE MDB_PAGE_FULL -/** @} */ - -/** @brief Statistics for a database in the environment */ -typedef struct MDB_stat { - unsigned int ms_psize; /**< Size of a database page. - This is currently the same for all databases. */ - unsigned int ms_depth; /**< Depth (height) of the B-tree */ - size_t ms_branch_pages; /**< Number of internal (non-leaf) pages */ - size_t ms_leaf_pages; /**< Number of leaf pages */ - size_t ms_overflow_pages; /**< Number of overflow pages */ - size_t ms_entries; /**< Number of data items */ -} MDB_stat; - -/** @brief Information about the environment */ -typedef struct MDB_envinfo { - void *me_mapaddr; /**< Address of map, if fixed */ - size_t me_mapsize; /**< Size of the data memory map */ - size_t me_last_pgno; /**< ID of the last used page */ - size_t me_last_txnid; /**< ID of the last committed transaction */ - unsigned int me_maxreaders; /**< maximum number of threads for the environment */ - unsigned int me_numreaders; /**< maximum number of threads used in the environment */ -} MDB_envinfo; - - /** @brief Return the mdb library version information. - * - * @param[out] major if non-NULL, the library major version number is copied here - * @param[out] minor if non-NULL, the library minor version number is copied here - * @param[out] patch if non-NULL, the library patch version number is copied here - * @retval "version string" The library version as a string - */ -char *mdb_version(int *major, int *minor, int *patch); - - /** @brief Return a string describing a given error code. - * - * This function is a superset of the ANSI C X3.159-1989 (ANSI C) strerror(3) - * function. If the error code is greater than or equal to 0, then the string - * returned by the system function strerror(3) is returned. If the error code - * is less than 0, an error string corresponding to the MDB library error is - * returned. See @ref errors for a list of MDB-specific error codes. - * @param[in] err The error code - * @retval "error message" The description of the error - */ -char *mdb_strerror(int err); - - /** @brief Create an MDB environment handle. - * - * This function allocates memory for a #MDB_env structure. To release - * the allocated memory and discard the handle, call #mdb_env_close(). - * Before the handle may be used, it must be opened using #mdb_env_open(). - * Various other options may also need to be set before opening the handle, - * e.g. #mdb_env_set_mapsize(), #mdb_env_set_maxreaders(), #mdb_env_set_maxdbs(), - * depending on usage requirements. - * @param[out] env The address where the new handle will be stored - * @return A non-zero error value on failure and 0 on success. - */ -int mdb_env_create(MDB_env **env); - - /** @brief Open an environment handle. - * - * If this function fails, #mdb_env_close() must be called to discard the #MDB_env handle. - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[in] path The directory in which the database files reside. This - * directory must already exist and be writable. - * @param[in] flags Special options for this environment. This parameter - * must be set to 0 or by bitwise OR'ing together one or more of the - * values described here. - * Flags set by mdb_env_set_flags() are also used. - *
    - *
  • #MDB_FIXEDMAP - * use a fixed address for the mmap region. This flag must be specified - * when creating the environment, and is stored persistently in the environment. - * If successful, the memory map will always reside at the same virtual address - * and pointers used to reference data items in the database will be constant - * across multiple invocations. This option may not always work, depending on - * how the operating system has allocated memory to shared libraries and other uses. - * The feature is highly experimental. - *
  • #MDB_NOSUBDIR - * By default, MDB creates its environment in a directory whose - * pathname is given in \b path, and creates its data and lock files - * under that directory. With this option, \b path is used as-is for - * the database main data file. The database lock file is the \b path - * with "-lock" appended. - *
  • #MDB_NOSYNC - * Don't perform a synchronous flush after committing a transaction. This means - * transactions will exhibit the ACI (atomicity, consistency, and isolation) - * properties, but not D (durability); that is database integrity will be - * maintained but it is possible some number of the most recently committed - * transactions may be undone after a system crash. The number of transactions - * at risk is governed by how often the system flushes dirty buffers to disk - * and how often #mdb_env_sync() is called. This flag may be changed - * at any time using #mdb_env_set_flags(). - *
  • #MDB_NOMETASYNC - * Don't perform a synchronous flush of the meta page after committing - * a transaction. This is similar to the #MDB_NOSYNC case, but safer - * because the transaction data is still flushed. The meta page for any - * transaction N will be flushed by the data flush of transaction N+1. - * In case of a system crash, the last committed transaction may be - * lost. This flag may be changed at any time using #mdb_env_set_flags(). - *
  • #MDB_RDONLY - * Open the environment in read-only mode. No write operations will be allowed. - *
- * @param[in] mode The UNIX permissions to set on created files. This parameter - * is ignored on Windows. - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • #MDB_VERSION_MISMATCH - the version of the MDB library doesn't match the - * version that created the database environment. - *
  • EINVAL - the environment file headers are corrupted. - *
  • ENOENT - the directory specified by the path parameter doesn't exist. - *
  • EACCES - the user didn't have permission to access the environment files. - *
  • EAGAIN - the environment was locked by another process. - *
- */ -int mdb_env_open(MDB_env *env, const char *path, unsigned int flags, mode_t mode); - - /** @brief Copy an MDB environment to the specified path. - * - * This function may be used to make a backup of an existing environment. - * @param[in] env An environment handle returned by #mdb_env_create(). It - * must have already been opened successfully. - * @param[in] path The directory in which the copy will reside. This - * directory must already exist and be writable but must otherwise be - * empty. - * @return A non-zero error value on failure and 0 on success. - */ -int mdb_env_copy(MDB_env *env, const char *path); - - /** @brief Return statistics about the MDB environment. - * - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[out] stat The address of an #MDB_stat structure - * where the statistics will be copied - */ -int mdb_env_stat(MDB_env *env, MDB_stat *stat); - - /** @brief Return information about the MDB environment. - * - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[out] stat The address of an #MDB_envinfo structure - * where the information will be copied - */ -int mdb_env_info(MDB_env *env, MDB_envinfo *stat); - - /** @brief Flush the data buffers to disk. - * - * Data is always written to disk when #mdb_txn_commit() is called, - * but the operating system may keep it buffered. MDB always flushes - * the OS buffers upon commit as well, unless the environment was - * opened with #MDB_NOSYNC. - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[in] force If non-zero, force a synchronous flush. Otherwise - * if the environment has the #MDB_NOSYNC flag set the flushes - * will be omitted, and with #MDB_MAPASYNC they will be asynchronous. - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
  • EIO - an error occurred during synchronization. - *
- */ -int mdb_env_sync(MDB_env *env, int force); - - /** @brief Close the environment and release the memory map. - * - * Only a single thread may call this function. All transactions, databases, - * and cursors must already be closed before calling this function. Attempts to - * use any such handles after calling this function will cause a SIGSEGV. - * The environment handle will be freed and must not be used again after this call. - * @param[in] env An environment handle returned by #mdb_env_create() - */ -void mdb_env_close(MDB_env *env); - - /** @brief Set environment flags. - * - * This may be used to set some flags in addition to those from - * #mdb_env_open(), or to unset these flags. - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[in] flags The flags to change, bitwise OR'ed together - * @param[in] onoff A non-zero value sets the flags, zero clears them. - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_env_set_flags(MDB_env *env, unsigned int flags, int onoff); - - /** @brief Get environment flags. - * - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[out] flags The address of an integer to store the flags - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_env_get_flags(MDB_env *env, unsigned int *flags); - - /** @brief Return the path that was used in #mdb_env_open(). - * - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[out] path Address of a string pointer to contain the path. This - * is the actual string in the environment, not a copy. It should not be - * altered in any way. - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_env_get_path(MDB_env *env, const char **path); - - /** @brief Set the size of the memory map to use for this environment. - * - * The size should be a multiple of the OS page size. The default is - * 10485760 bytes. The size of the memory map is also the maximum size - * of the database. The value should be chosen as large as possible, - * to accommodate future growth of the database. - * This function may only be called after #mdb_env_create() and before #mdb_env_open(). - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[in] size The size in bytes - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified, or the environment is already open. - *
- */ -int mdb_env_set_mapsize(MDB_env *env, size_t size); - - /** @brief Set the maximum number of threads for the environment. - * - * This defines the number of slots in the lock table that is used to track readers in the - * the environment. The default is 126. - * This function may only be called after #mdb_env_create() and before #mdb_env_open(). - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[in] readers The maximum number of threads - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified, or the environment is already open. - *
- */ -int mdb_env_set_maxreaders(MDB_env *env, unsigned int readers); - - /** @brief Get the maximum number of threads for the environment. - * - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[out] readers Address of an integer to store the number of readers - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_env_get_maxreaders(MDB_env *env, unsigned int *readers); - - /** @brief Set the maximum number of named databases for the environment. - * - * This function is only needed if multiple databases will be used in the - * environment. Simpler applications that use the environment as a single - * unnamed database can ignore this option. - * This function may only be called after #mdb_env_create() and before #mdb_env_open(). - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[in] dbs The maximum number of databases - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified, or the environment is already open. - *
- */ -int mdb_env_set_maxdbs(MDB_env *env, MDB_dbi dbs); - - /** @brief Create a transaction for use with the environment. - * - * The transaction handle may be discarded using #mdb_txn_abort() or #mdb_txn_commit(). - * @note Transactions may not span threads; a transaction must only be used by a - * single thread. Also, a thread may only have a single transaction. - * @note Cursors may not span transactions; each cursor must be opened and closed - * within a single transaction. - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[in] parent If this parameter is non-NULL, the new transaction - * will be a nested transaction, with the transaction indicated by \b parent - * as its parent. Transactions may be nested to any level. A parent - * transaction may not issue any other operations besides mdb_txn_begin, - * mdb_txn_abort, or mdb_txn_commit while it has active child transactions. - * @param[in] flags Special options for this transaction. This parameter - * must be set to 0 or by bitwise OR'ing together one or more of the - * values described here. - *
    - *
  • #MDB_RDONLY - * This transaction will not perform any write operations. - *
- * @param[out] txn Address where the new #MDB_txn handle will be stored - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • #MDB_PANIC - a fatal error occurred earlier and the environment - * must be shut down. - *
  • ENOMEM - out of memory, or a read-only transaction was requested and - * the reader lock table is full. See #mdb_env_set_maxreaders(). - *
- */ -int mdb_txn_begin(MDB_env *env, MDB_txn *parent, unsigned int flags, MDB_txn **txn); - - /** @brief Commit all the operations of a transaction into the database. - * - * All cursors opened within the transaction will be closed by this call. The cursors - * and transaction handle will be freed and must not be used again after this call. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
  • ENOSPC - no more disk space. - *
  • EIO - a low-level I/O error occurred while writing. - *
  • ENOMEM - the transaction is nested and could not be merged into its parent. - *
- */ -int mdb_txn_commit(MDB_txn *txn); - - /** @brief Abandon all the operations of the transaction instead of saving them. - * - * All cursors opened within the transaction will be closed by this call. The cursors - * and transaction handle will be freed and must not be used again after this call. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - */ -void mdb_txn_abort(MDB_txn *txn); - - /** @brief Reset a read-only transaction. - * - * This releases the current reader lock but doesn't free the - * transaction handle, allowing it to be used again later by #mdb_txn_renew(). - * It otherwise has the same effect as #mdb_txn_abort() but saves some memory - * allocation/deallocation overhead if a thread is going to start a new - * read-only transaction again soon. - * All cursors opened within the transaction must be closed before the transaction - * is reset. - * Reader locks generally don't interfere with writers, but they keep old - * versions of database pages allocated. Thus they prevent the old pages - * from being reused when writers commit new data, and so under heavy load - * the database size may grow much more rapidly than otherwise. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - */ -void mdb_txn_reset(MDB_txn *txn); - - /** @brief Renew a read-only transaction. - * - * This acquires a new reader lock for a transaction handle that had been - * released by #mdb_txn_reset(). It must be called before a reset transaction - * may be used again. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • #MDB_PANIC - a fatal error occurred earlier and the environment - * must be shut down. - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_txn_renew(MDB_txn *txn); - - /** @brief Open a database in the environment. - * - * The database handle may be discarded by calling #mdb_close(). The - * database handle resides in the shared environment, it is not owned - * by the given transaction. Only one thread should call this function; - * it is not mutex-protected in a read-only transaction. - * To use named databases (with name != NULL), #mdb_env_set_maxdbs() - * must be called before opening the enviorment. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] name The name of the database to open. If only a single - * database is needed in the environment, this value may be NULL. - * @param[in] flags Special options for this database. This parameter - * must be set to 0 or by bitwise OR'ing together one or more of the - * values described here. - *
    - *
  • #MDB_REVERSEKEY - * Keys are strings to be compared in reverse order, from the end - * of the strings to the beginning. By default, Keys are treated as strings and - * compared from beginning to end. - *
  • #MDB_DUPSORT - * Duplicate keys may be used in the database. (Or, from another perspective, - * keys may have multiple data items, stored in sorted order.) By default - * keys must be unique and may have only a single data item. - *
  • #MDB_INTEGERKEY - * Keys are binary integers in native byte order. Setting this option - * requires all keys to be the same size, typically sizeof(int) - * or sizeof(size_t). - *
  • #MDB_DUPFIXED - * This flag may only be used in combination with #MDB_DUPSORT. This option - * tells the library that the data items for this database are all the same - * size, which allows further optimizations in storage and retrieval. When - * all data items are the same size, the #MDB_GET_MULTIPLE and #MDB_NEXT_MULTIPLE - * cursor operations may be used to retrieve multiple items at once. - *
  • #MDB_INTEGERDUP - * This option specifies that duplicate data items are also integers, and - * should be sorted as such. - *
  • #MDB_REVERSEDUP - * This option specifies that duplicate data items should be compared as - * strings in reverse order. - *
  • #MDB_CREATE - * Create the named database if it doesn't exist. This option is not - * allowed in a read-only transaction or a read-only environment. - *
- * @param[out] dbi Address where the new #MDB_dbi handle will be stored - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • #MDB_NOTFOUND - the specified database doesn't exist in the environment - * and #MDB_CREATE was not specified. - *
  • ENFILE - too many databases have been opened. See #mdb_env_set_maxdbs(). - *
- */ -int mdb_open(MDB_txn *txn, const char *name, unsigned int flags, MDB_dbi *dbi); - - /** @brief Retrieve statistics for a database. - * - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[out] stat The address of an #MDB_stat structure - * where the statistics will be copied - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_stat(MDB_txn *txn, MDB_dbi dbi, MDB_stat *stat); - - /** @brief Close a database handle. - * - * This call is not mutex protected. Handles should only be closed by - * a single thread, and only if no other threads are going to reference - * the database handle any further. - * @param[in] env An environment handle returned by #mdb_env_create() - * @param[in] dbi A database handle returned by #mdb_open() - */ -void mdb_close(MDB_env *env, MDB_dbi dbi); - - /** @brief Delete a database and/or free all its pages. - * - * If the \b del parameter is 1, the DB handle will be closed - * and the DB will be deleted. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] del 1 to delete the DB from the environment, - * 0 to just free its pages. - * @return A non-zero error value on failure and 0 on success. - */ -int mdb_drop(MDB_txn *txn, MDB_dbi dbi, int del); - - /** @brief Set a custom key comparison function for a database. - * - * The comparison function is called whenever it is necessary to compare a - * key specified by the application with a key currently stored in the database. - * If no comparison function is specified, and no special key flags were specified - * with #mdb_open(), the keys are compared lexically, with shorter keys collating - * before longer keys. - * @warning This function must be called before any data access functions are used, - * otherwise data corruption may occur. The same comparison function must be used by every - * program accessing the database, every time the database is used. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] cmp A #MDB_cmp_func function - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_set_compare(MDB_txn *txn, MDB_dbi dbi, MDB_cmp_func *cmp); - - /** @brief Set a custom data comparison function for a #MDB_DUPSORT database. - * - * This comparison function is called whenever it is necessary to compare a data - * item specified by the application with a data item currently stored in the database. - * This function only takes effect if the database was opened with the #MDB_DUPSORT - * flag. - * If no comparison function is specified, and no special key flags were specified - * with #mdb_open(), the data items are compared lexically, with shorter items collating - * before longer items. - * @warning This function must be called before any data access functions are used, - * otherwise data corruption may occur. The same comparison function must be used by every - * program accessing the database, every time the database is used. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] cmp A #MDB_cmp_func function - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_set_dupsort(MDB_txn *txn, MDB_dbi dbi, MDB_cmp_func *cmp); - - /** @brief Set a relocation function for a #MDB_FIXEDMAP database. - * - * @todo The relocation function is called whenever it is necessary to move the data - * of an item to a different position in the database (e.g. through tree - * balancing operations, shifts as a result of adds or deletes, etc.). It is - * intended to allow address/position-dependent data items to be stored in - * a database in an environment opened with the #MDB_FIXEDMAP option. - * Currently the relocation feature is unimplemented and setting - * this function has no effect. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] rel A #MDB_rel_func function - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_set_relfunc(MDB_txn *txn, MDB_dbi dbi, MDB_rel_func *rel); - - /** @brief Set a context pointer for a #MDB_FIXEDMAP database's relocation function. - * - * See #mdb_set_relfunc and #MDB_rel_func for more details. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] ctx An arbitrary pointer for whatever the application needs. - * It will be passed to the callback function set by #mdb_set_relfunc - * as its \b relctx parameter whenever the callback is invoked. - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_set_relctx(MDB_txn *txn, MDB_dbi dbi, void *ctx); - - /** @brief Get items from a database. - * - * This function retrieves key/data pairs from the database. The address - * and length of the data associated with the specified \b key are returned - * in the structure to which \b data refers. - * If the database supports duplicate keys (#MDB_DUPSORT) then the - * first data item for the key will be returned. Retrieval of other - * items requires the use of #mdb_cursor_get(). - * - * @note The memory pointed to by the returned values is owned by the - * database. The caller need not dispose of the memory, and may not - * modify it in any way. For values returned in a read-only transaction - * any modification attempts will cause a SIGSEGV. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] key The key to search for in the database - * @param[out] data The data corresponding to the key - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • #MDB_NOTFOUND - the key was not in the database. - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_get(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data); - - /** @brief Store items into a database. - * - * This function stores key/data pairs in the database. The default behavior - * is to enter the new key/data pair, replacing any previously existing key - * if duplicates are disallowed, or adding a duplicate data item if - * duplicates are allowed (#MDB_DUPSORT). - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] key The key to store in the database - * @param[in,out] data The data to store - * @param[in] flags Special options for this operation. This parameter - * must be set to 0 or by bitwise OR'ing together one or more of the - * values described here. - *
    - *
  • #MDB_NODUPDATA - enter the new key/data pair only if it does not - * already appear in the database. This flag may only be specified - * if the database was opened with #MDB_DUPSORT. The function will - * return #MDB_KEYEXIST if the key/data pair already appears in the - * database. - *
  • #MDB_NOOVERWRITE - enter the new key/data pair only if the key - * does not already appear in the database. The function will return - * #MDB_KEYEXIST if the key already appears in the database, even if - * the database supports duplicates (#MDB_DUPSORT). The \b data - * parameter will be set to point to the existing item. - *
  • #MDB_RESERVE - reserve space for data of the given size, but - * don't copy the given data. Instead, return a pointer to the - * reserved space, which the caller can fill in later. This saves - * an extra memcpy if the data is being generated later. - *
  • #MDB_APPEND - append the given key/data pair to the end of the - * database. No key comparisons are performed. This option allows - * fast bulk loading when keys are already known to be in the - * correct order. Loading unsorted keys with this flag will cause - * data corruption. - *
  • #MDB_APPENDDUP - as above, but for sorted dup data. - *
- * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EACCES - an attempt was made to write in a read-only transaction. - *
  • EINVAL - an invalid parameter was specified. - *
  • ENOMEM - the database is full, see #mdb_env_set_mapsize(). - *
- */ -int mdb_put(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data, - unsigned int flags); - - /** @brief Delete items from a database. - * - * This function removes key/data pairs from the database. - * If the database does not support sorted duplicate data items - * (#MDB_DUPSORT) the data parameter is ignored. - * If the database supports sorted duplicates and the data parameter - * is NULL, all of the duplicate data items for the key will be - * deleted. Otherwise, if the data parameter is non-NULL - * only the matching data item will be deleted. - * This function will return #MDB_NOTFOUND if the specified key/data - * pair is not in the database. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] key The key to delete from the database - * @param[in] data The data to delete - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EACCES - an attempt was made to write in a read-only transaction. - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_del(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data); - - /** @brief Create a cursor handle. - * - * Cursors are associated with a specific transaction and database and - * may not span threads. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[out] cursor Address where the new #MDB_cursor handle will be stored - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_cursor_open(MDB_txn *txn, MDB_dbi dbi, MDB_cursor **cursor); - - /** @brief Close a cursor handle. - * - * The cursor handle will be freed and must not be used again after this call. - * @param[in] cursor A cursor handle returned by #mdb_cursor_open() - */ -void mdb_cursor_close(MDB_cursor *cursor); - - /** @brief Renew a cursor handle. - * - * Cursors are associated with a specific transaction and database and - * may not span threads. Cursors that are only used in read-only - * transactions may be re-used, to avoid unnecessary malloc/free overhead. - * The cursor may be associated with a new read-only transaction, and - * referencing the same database handle as it was created with. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] cursor A cursor handle returned by #mdb_cursor_open() - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_cursor_renew(MDB_txn *txn, MDB_cursor *cursor); - - /** @brief Return the cursor's transaction handle. - * - * @param[in] cursor A cursor handle returned by #mdb_cursor_open() - */ -MDB_txn *mdb_cursor_txn(MDB_cursor *cursor); - - /** @brief Return the cursor's database handle. - * - * @param[in] cursor A cursor handle returned by #mdb_cursor_open() - */ -MDB_dbi mdb_cursor_dbi(MDB_cursor *cursor); - - /** @brief Retrieve by cursor. - * - * This function retrieves key/data pairs from the database. The address and length - * of the key are returned in the object to which \b key refers (except for the - * case of the #MDB_SET option, in which the \b key object is unchanged), and - * the address and length of the data are returned in the object to which \b data - * refers. - * @param[in] cursor A cursor handle returned by #mdb_cursor_open() - * @param[in,out] key The key for a retrieved item - * @param[in,out] data The data of a retrieved item - * @param[in] op A cursor operation #MDB_cursor_op - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • #MDB_NOTFOUND - no matching key found. - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_cursor_get(MDB_cursor *cursor, MDB_val *key, MDB_val *data, - MDB_cursor_op op); - - /** @brief Store by cursor. - * - * This function stores key/data pairs into the database. - * If the function fails for any reason, the state of the cursor will be - * unchanged. If the function succeeds and an item is inserted into the - * database, the cursor is always positioned to refer to the newly inserted item. - * @param[in] cursor A cursor handle returned by #mdb_cursor_open() - * @param[in] key The key operated on. - * @param[in] data The data operated on. - * @param[in] flags Options for this operation. This parameter - * must be set to 0 or one of the values described here. - *
    - *
  • #MDB_CURRENT - overwrite the data of the key/data pair to which - * the cursor refers with the specified data item. The \b key - * parameter is ignored. - *
  • #MDB_NODUPDATA - enter the new key/data pair only if it does not - * already appear in the database. This flag may only be specified - * if the database was opened with #MDB_DUPSORT. The function will - * return #MDB_KEYEXIST if the key/data pair already appears in the - * database. - *
  • #MDB_NOOVERWRITE - enter the new key/data pair only if the key - * does not already appear in the database. The function will return - * #MDB_KEYEXIST if the key already appears in the database, even if - * the database supports duplicates (#MDB_DUPSORT). - *
  • #MDB_RESERVE - reserve space for data of the given size, but - * don't copy the given data. Instead, return a pointer to the - * reserved space, which the caller can fill in later. This saves - * an extra memcpy if the data is being generated later. - *
  • #MDB_APPEND - append the given key/data pair to the end of the - * database. No key comparisons are performed. This option allows - * fast bulk loading when keys are already known to be in the - * correct order. Loading unsorted keys with this flag will cause - * data corruption. - *
  • #MDB_APPENDDUP - as above, but for sorted dup data. - *
- * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EACCES - an attempt was made to modify a read-only database. - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_cursor_put(MDB_cursor *cursor, MDB_val *key, MDB_val *data, - unsigned int flags); - - /** @brief Delete current key/data pair - * - * This function deletes the key/data pair to which the cursor refers. - * @param[in] cursor A cursor handle returned by #mdb_cursor_open() - * @param[in] flags Options for this operation. This parameter - * must be set to 0 or one of the values described here. - *
    - *
  • #MDB_NODUPDATA - delete all of the data items for the current key. - * This flag may only be specified if the database was opened with #MDB_DUPSORT. - *
- * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EACCES - an attempt was made to modify a read-only database. - *
  • EINVAL - an invalid parameter was specified. - *
- */ -int mdb_cursor_del(MDB_cursor *cursor, unsigned int flags); - - /** @brief Return count of duplicates for current key. - * - * This call is only valid on databases that support sorted duplicate - * data items #MDB_DUPSORT. - * @param[in] cursor A cursor handle returned by #mdb_cursor_open() - * @param[out] countp Address where the count will be stored - * @return A non-zero error value on failure and 0 on success. Some possible - * errors are: - *
    - *
  • EINVAL - cursor is not initialized, or an invalid parameter was specified. - *
- */ -int mdb_cursor_count(MDB_cursor *cursor, size_t *countp); - - /** @brief Compare two data items according to a particular database. - * - * This returns a comparison as if the two data items were keys in the - * specified database. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] a The first item to compare - * @param[in] b The second item to compare - * @return < 0 if a < b, 0 if a == b, > 0 if a > b - */ -int mdb_cmp(MDB_txn *txn, MDB_dbi dbi, const MDB_val *a, const MDB_val *b); - - /** @brief Compare two data items according to a particular database. - * - * This returns a comparison as if the two items were data items of - * a sorted duplicates #MDB_DUPSORT database. - * @param[in] txn A transaction handle returned by #mdb_txn_begin() - * @param[in] dbi A database handle returned by #mdb_open() - * @param[in] a The first item to compare - * @param[in] b The second item to compare - * @return < 0 if a < b, 0 if a == b, > 0 if a > b - */ -int mdb_dcmp(MDB_txn *txn, MDB_dbi dbi, const MDB_val *a, const MDB_val *b); -/** @} */ - -#ifdef __cplusplus -} -#endif -#endif /* _MDB_H_ */ diff --git a/libraries/libmdb/mdb_copy.c b/libraries/libmdb/mdb_copy.c index 3eae9ba7d1..bd0b859110 100644 --- a/libraries/libmdb/mdb_copy.c +++ b/libraries/libmdb/mdb_copy.c @@ -13,7 +13,7 @@ */ #include #include -#include "mdb.h" +#include "lmdb.h" int main(int argc,char * argv[]) { diff --git a/libraries/libmdb/mdb_stat.c b/libraries/libmdb/mdb_stat.c index 88ac801807..4dfcf49645 100644 --- a/libraries/libmdb/mdb_stat.c +++ b/libraries/libmdb/mdb_stat.c @@ -15,7 +15,7 @@ #include #include #include -#include "mdb.h" +#include "lmdb.h" static void prstat(MDB_stat *ms) { diff --git a/libraries/libmdb/mfree.c b/libraries/libmdb/mfree.c index b0e6980026..79cce66fa6 100644 --- a/libraries/libmdb/mfree.c +++ b/libraries/libmdb/mfree.c @@ -15,7 +15,7 @@ #include #include #include -#include "mdb.h" +#include "lmdb.h" #include "midl.h" int main(int argc,char * argv[]) diff --git a/libraries/libmdb/mtest.c b/libraries/libmdb/mtest.c index bb5ec816b6..8c8dd57835 100644 --- a/libraries/libmdb/mtest.c +++ b/libraries/libmdb/mtest.c @@ -15,7 +15,7 @@ #include #include #include -#include "mdb.h" +#include "lmdb.h" int main(int argc,char * argv[]) { diff --git a/libraries/libmdb/mtest2.c b/libraries/libmdb/mtest2.c index a0e9914417..44d1de7ccd 100644 --- a/libraries/libmdb/mtest2.c +++ b/libraries/libmdb/mtest2.c @@ -18,7 +18,7 @@ #include #include #include -#include "mdb.h" +#include "lmdb.h" int main(int argc,char * argv[]) { diff --git a/libraries/libmdb/mtest3.c b/libraries/libmdb/mtest3.c index eb9723ba2e..c189eaa952 100644 --- a/libraries/libmdb/mtest3.c +++ b/libraries/libmdb/mtest3.c @@ -18,7 +18,7 @@ #include #include #include -#include "mdb.h" +#include "lmdb.h" int main(int argc,char * argv[]) { diff --git a/libraries/libmdb/mtest4.c b/libraries/libmdb/mtest4.c index b2f5d931c6..e0ba7e20b6 100644 --- a/libraries/libmdb/mtest4.c +++ b/libraries/libmdb/mtest4.c @@ -18,7 +18,7 @@ #include #include #include -#include "mdb.h" +#include "lmdb.h" int main(int argc,char * argv[]) { diff --git a/libraries/libmdb/mtest5.c b/libraries/libmdb/mtest5.c index c63402ed6b..bc472fa093 100644 --- a/libraries/libmdb/mtest5.c +++ b/libraries/libmdb/mtest5.c @@ -18,7 +18,7 @@ #include #include #include -#include "mdb.h" +#include "lmdb.h" int main(int argc,char * argv[]) { diff --git a/libraries/libmdb/mtest6.c b/libraries/libmdb/mtest6.c index a5bf3a2119..0bf26ccc45 100644 --- a/libraries/libmdb/mtest6.c +++ b/libraries/libmdb/mtest6.c @@ -18,7 +18,7 @@ #include #include #include -#include "mdb.h" +#include "lmdb.h" char dkbuf[1024];