From: Prabhakar Kushwaha <prabhakar@freescale.com>
Date: Wed, 4 Nov 2015 06:56:02 +0000 (+0530)
Subject: driver: net: ldpaa: Fix Rx buffer alignment
X-Git-Tag: v2016.01-rc2~108^2~19
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=14480454c76d0f0bc4c5828cc1f054ba6278530e;p=u-boot

driver: net: ldpaa: Fix Rx buffer alignment

MC 0.7.1.2 enforces limitation i.e.: "Packets may be corrupted
in several combinations of buffer size and frame offsets.
Workaround: Use buffers that are of size that is a multiple of 256, and
frame offset that is a multiple of 256"

Updating the DPNI Eth driver to comply with the restriction.

Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
---

diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c
index 5ddc9fe2a0..69530b11cf 100644
--- a/drivers/net/ldpaa_eth/ldpaa_eth.c
+++ b/drivers/net/ldpaa_eth/ldpaa_eth.c
@@ -500,7 +500,7 @@ static int ldpaa_bp_add_7(uint16_t bpid)
 	struct qbman_release_desc rd;
 
 	for (i = 0; i < 7; i++) {
-		addr = memalign(L1_CACHE_BYTES, LDPAA_ETH_RX_BUFFER_SIZE);
+		addr = memalign(LDPAA_ETH_BUF_ALIGN, LDPAA_ETH_RX_BUFFER_SIZE);
 		if (!addr) {
 			printf("addr allocation failed\n");
 			goto err_alloc;
@@ -685,10 +685,13 @@ static int ldpaa_dpni_setup(struct ldpaa_eth_priv *priv)
 	/* Configure our buffers' layout */
 	dflt_dpni->buf_layout.options = DPNI_BUF_LAYOUT_OPT_PARSER_RESULT |
 				   DPNI_BUF_LAYOUT_OPT_FRAME_STATUS |
-				   DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE;
+				   DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE |
+				   DPNI_BUF_LAYOUT_OPT_DATA_ALIGN;
 	dflt_dpni->buf_layout.pass_parser_result = true;
 	dflt_dpni->buf_layout.pass_frame_status = true;
 	dflt_dpni->buf_layout.private_data_size = LDPAA_ETH_SWA_SIZE;
+	/* HW erratum mandates data alignment in multiples of 256 */
+	dflt_dpni->buf_layout.data_align = LDPAA_ETH_BUF_ALIGN;
 	/* ...rx, ... */
 	err = dpni_set_rx_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS,
 					dflt_dpni->dpni_handle,
@@ -699,7 +702,9 @@ static int ldpaa_dpni_setup(struct ldpaa_eth_priv *priv)
 	}
 
 	/* ... tx, ... */
-	dflt_dpni->buf_layout.options &= ~DPNI_BUF_LAYOUT_OPT_PARSER_RESULT;
+	/* remove Rx-only options */
+	dflt_dpni->buf_layout.options &= ~(DPNI_BUF_LAYOUT_OPT_DATA_ALIGN |
+				      DPNI_BUF_LAYOUT_OPT_PARSER_RESULT);
 	err = dpni_set_tx_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS,
 					dflt_dpni->dpni_handle,
 					&dflt_dpni->buf_layout);
diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.h b/drivers/net/ldpaa_eth/ldpaa_eth.h
index b86a695328..af41b27844 100644
--- a/drivers/net/ldpaa_eth/ldpaa_eth.h
+++ b/drivers/net/ldpaa_eth/ldpaa_eth.h
@@ -28,10 +28,10 @@ enum ldpaa_eth_type {
 #define LDPAA_ETH_REFILL_THRESH		(LDPAA_ETH_NUM_BUFS/2)
 #define LDPAA_ETH_RX_BUFFER_SIZE	2048
 
-/* Hardware requires alignment for ingress/egress buffer addresses
- * and ingress buffer lengths.
+/* Hardware requires alignment for buffer address and length: 256-byte
+ * for ingress, 64-byte for egress. Using 256 for both.
  */
-#define LDPAA_ETH_BUF_ALIGN		64
+#define LDPAA_ETH_BUF_ALIGN		256
 
 /* So far we're only accomodating a skb backpointer in the frame's
  * software annotation, but the hardware options are either 0 or 64.