From: Sean Cross Date: Thu, 18 Aug 2016 05:16:29 +0000 (+0000) Subject: jtag: drivers: bcm2835gpio: set 4ma drive, slow slew rate X-Git-Tag: v0.10.0-rc1~38 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=1461237073e377d315799999b8e29f1605084449;p=openocd jtag: drivers: bcm2835gpio: set 4ma drive, slow slew rate Both the drive strength and slew rate are currently set to very high values. This causes the waveforms to overshoot and be less reliable when operating at high speed. This patch lowers the slew rate and sets the drive strength to 4ma, improving the waveform output. Change-Id: I761d35cd64bc54a9e94043904ef00a003b056af0 Signed-off-by: Sean Cross Reviewed-on: http://openocd.zylin.com/3707 Tested-by: jenkins Reviewed-by: Paul Fertser Reviewed-by: Tomas Vanek Reviewed-by: Philipp Guehring --- diff --git a/src/jtag/drivers/bcm2835gpio.c b/src/jtag/drivers/bcm2835gpio.c index 1622b221..a41caf07 100644 --- a/src/jtag/drivers/bcm2835gpio.c +++ b/src/jtag/drivers/bcm2835gpio.c @@ -468,8 +468,8 @@ static int bcm2835gpio_init(void) return ERROR_JTAG_INIT_FAILED; } - /* set 16mA drive strength */ - pads_base[BCM2835_PADS_GPIO_0_27_OFFSET] = 0x5a000018 + 7; + /* set 4mA drive strength, slew rate limited, hysteresis on */ + pads_base[BCM2835_PADS_GPIO_0_27_OFFSET] = 0x5a000008 + 1; tdo_gpio_mode = MODE_GPIO(tdo_gpio); tdi_gpio_mode = MODE_GPIO(tdi_gpio);