From: Steve Sakoman Date: Fri, 30 Sep 2011 09:04:14 +0000 (+0000) Subject: omap: overo: Configure mux for gpio10 X-Git-Tag: v2011.12-rc1~343^2~29 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=14aa545c45f3f6d487c83b4fc3be19dd9f9e4e5b;p=u-boot omap: overo: Configure mux for gpio10 This pad was previously configured for sysclkout_1. This patch changes the configuration to gpio_10 to reduce radiated noise from the 26Mhz clock, as well as make the pin more generally useful. Signed-off-by: Steve Sakoman Acked-by: Philip Balister Signed-off-by: Sandeep Paulraj --- diff --git a/board/overo/overo.h b/board/overo/overo.h index d394f902a1..42ef1b1dff 100644 --- a/board/overo/overo.h +++ b/board/overo/overo.h @@ -290,7 +290,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10*/\ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\ MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\