From: Nikhil Badola <nikhil.badola@freescale.com>
Date: Thu, 8 May 2014 11:35:26 +0000 (+0530)
Subject: drivers/usb : Define usb control register mask for w1c bits
X-Git-Tag: v2014.07-rc2~12^2~5
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=15231f6dd14b592e2bdef33f6aea1ca1d88fd1bf;p=u-boot

drivers/usb : Define usb control register mask for w1c bits

Define and use CONTROL_REGISTER_W1C_MASK to make sure that
w1c bits of usb control register do not get reset while
writing any other bit

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
---

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 6cb4d98668..45062e699b 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -104,15 +104,20 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 
 	if (!strncmp(phy_type, "utmi", 4)) {
 #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
-		setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI);
-		setbits_be32(&ehci->control, UTMI_PHY_EN);
+		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
+				PHY_CLK_SEL_UTMI);
+		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
+				UTMI_PHY_EN);
 		udelay(1000); /* delay required for PHY Clk to appear */
 #endif
 		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI);
-		setbits_be32(&ehci->control, USB_EN);
+		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
+				USB_EN);
 	} else {
-		setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI);
-		clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN);
+		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
+				PHY_CLK_SEL_ULPI);
+		clrsetbits_be32(&ehci->control, UTMI_PHY_EN |
+				CONTROL_REGISTER_W1C_MASK, USB_EN);
 		udelay(1000); /* delay required for PHY Clk to appear */
 		if (!usb_phy_clk_valid(ehci))
 			return -EINVAL;
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h
index c9ee1d5bf6..dd77ad6325 100644
--- a/include/usb/ehci-fsl.h
+++ b/include/usb/ehci-fsl.h
@@ -11,6 +11,8 @@
 
 #include <asm/processor.h>
 
+#define CONTROL_REGISTER_W1C_MASK       0x00020000  /* W1C: PHY_CLK_VALID */
+
 /* Global offsets */
 #define FSL_SKIP_PCI		0x100