From: Fabio Estevam Date: Fri, 13 Jun 2014 04:42:37 +0000 (-0300) Subject: mx6: soc: Update the comments of set_ldo_voltage() X-Git-Tag: v2014.07~10^2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=157f45da91b306d71dbf3a51325352dc11bf16d1;p=u-boot mx6: soc: Update the comments of set_ldo_voltage() Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces set_ldo_voltage() function that can be used to set the voltages of any of the three LDO regulators controlled by the PMU_REG_CORE register. Prior to this commit there was a single set_vddsoc() which only configured the VDDSOC regulator. Update the comments to align with the new set_ldo_voltage() implementation. Signed-off-by: Fabio Estevam --- diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 172527987d..f20bdebf3f 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -124,10 +124,9 @@ static void clear_ldo_ramp(void) } /* - * Set the VDDSOC + * Set the PMU_REG_CORE register * - * Mask out the REG_CORE[22:18] bits (REG2_TRIG) and set - * them to the specified millivolt level. + * Set LDO_SOC/PU/ARM regulators to the specified millivolt level. * Possible values are from 0.725V to 1.450V in steps of * 0.025V (25mV). */