From: Alexey Brodkin Date: Wed, 31 Jan 2018 14:56:59 +0000 (+0300) Subject: usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH X-Git-Tag: v2018.03-rc3~12^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=163f8858ae8bfcd94ef8d6c4ed75ff3abb642450;p=u-boot usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH For some reason from day one we used to have both CONFIG_DWC2_UTMI_WIDTH mentioned in dwc2.h and in scripts/config_whitelist.txt but never really used and CONFIG_DWC2_UTMI_PHY_WIDTH used in real code in dwc2.c (but never defined). Moreover even though CONFIG_DWC2_UTMI_WIDTH might be either 8 or 16 depending on hardware (and the same is said in a comment for it in dwc2.h) but then 8 is hardcoded in the header leaving no ability to override this value in board's configuration. Signed-off-by: Alexey Brodkin Cc: Marek Vasut --- diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index 540c016412..0efe645044 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -375,7 +375,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv) usbcfg &= ~DWC2_GUSBCFG_DDRSEL; #endif } else { /* UTMI+ interface */ -#if (CONFIG_DWC2_UTMI_PHY_WIDTH == 16) +#if (CONFIG_DWC2_UTMI_WIDTH == 16) usbcfg |= DWC2_GUSBCFG_PHYIF; #endif } diff --git a/drivers/usb/host/dwc2.h b/drivers/usb/host/dwc2.h index 4482dc621d..574607a2ac 100644 --- a/drivers/usb/host/dwc2.h +++ b/drivers/usb/host/dwc2.h @@ -775,7 +775,9 @@ struct dwc2_core_regs { #define DWC2_PHY_TYPE_UTMI 1 #define DWC2_PHY_TYPE_ULPI 2 #define CONFIG_DWC2_PHY_TYPE DWC2_PHY_TYPE_UTMI /* PHY type */ +#ifndef CONFIG_DWC2_UTMI_WIDTH #define CONFIG_DWC2_UTMI_WIDTH 8 /* UTMI bus width (8/16) */ +#endif #undef CONFIG_DWC2_PHY_ULPI_DDR /* ULPI PHY uses DDR mode */ #define CONFIG_DWC2_PHY_ULPI_EXT_VBUS /* ULPI PHY controls VBUS */