From: Shadi Ammouri Date: Thu, 27 Oct 2016 11:29:41 +0000 (+0200) Subject: pci: mvebu: Add PCIe driver for Armada-8K X-Git-Tag: v2017.01-rc1~14 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=182ba1a7dfe94fed21eff666cc1a4f38c7a3e88e;p=u-boot pci: mvebu: Add PCIe driver for Armada-8K This patch adds a driver for the PCIe controller integrated in the Marvell Armada-8K SoC. This controller is based on the DesignWare IP core. The original version was written by Shadi and Yehuda. I ported this driver to the latest mainline U-Boot version with DM support. Tested on the Marvell DB-88F8040 Armada-8K eval board. Signed-off-by: Shadi Ammouri Signed-off-by: Yehuda Yitschak Signed-off-by: Stefan Roese Reviewed-by: Simon Glass Cc: Nadav Haklai Cc: Neta Zur Hershkovits Cc: Kostya Porotchkin Cc: Omri Itach Cc: Igal Liberman Cc: Haim Boot Cc: Hanna Hawa --- diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index b8376b4f47..ff2c37006e 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -33,6 +33,16 @@ config PCI_PNP help Enable PCI memory and I/O space resource allocation and assignment. +config PCIE_DW_MVEBU + bool "Enable Armada-8K PCIe driver (DesignWare core)" + default n + depends on DM_PCI + depends on ARMADA_8K + help + Say Y here if you want to enable PCIe controller support on + Armada-8K SoCs. The PCIe controller on Armada-8K is based on + DesignWare hardware. + config PCI_SANDBOX bool "Sandbox PCI support" depends on SANDBOX && DM_PCI diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 9583e91ceb..86717a4fc3 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -30,5 +30,6 @@ obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o obj-$(CONFIG_PCI_TEGRA) += pci_tegra.o obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o obj-$(CONFIG_WINBOND_83C553) += w83c553f.o +obj-$(CONFIG_PCIE_DW_MVEBU) += pcie_dw_mvebu.o obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o obj-$(CONFIG_PCI_XILINX) += pcie_xilinx.o diff --git a/drivers/pci/pcie_dw_mvebu.c b/drivers/pci/pcie_dw_mvebu.c new file mode 100644 index 0000000000..17fa0244d0 --- /dev/null +++ b/drivers/pci/pcie_dw_mvebu.c @@ -0,0 +1,535 @@ +/* + * Copyright (C) 2015 Marvell International Ltd. + * + * Copyright (C) 2016 Stefan Roese + * + * Based on: + * - drivers/pci/pcie_imx.c + * - drivers/pci/pci_mvebu.c + * - drivers/pci/pcie_xilinx.c + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* PCI Config space registers */ +#define PCIE_CONFIG_BAR0 0x10 +#define PCIE_LINK_STATUS_REG 0x80 +#define PCIE_LINK_STATUS_SPEED_OFF 16 +#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF) +#define PCIE_LINK_STATUS_WIDTH_OFF 20 +#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF) + +/* Resizable bar capability registers */ +#define RESIZABLE_BAR_CAP 0x250 +#define RESIZABLE_BAR_CTL0 0x254 +#define RESIZABLE_BAR_CTL1 0x258 + +/* iATU registers */ +#define PCIE_ATU_VIEWPORT 0x900 +#define PCIE_ATU_REGION_INBOUND (0x1 << 31) +#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) +#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) +#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) +#define PCIE_ATU_CR1 0x904 +#define PCIE_ATU_TYPE_MEM (0x0 << 0) +#define PCIE_ATU_TYPE_IO (0x2 << 0) +#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) +#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) +#define PCIE_ATU_CR2 0x908 +#define PCIE_ATU_ENABLE (0x1 << 31) +#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) +#define PCIE_ATU_LOWER_BASE 0x90C +#define PCIE_ATU_UPPER_BASE 0x910 +#define PCIE_ATU_LIMIT 0x914 +#define PCIE_ATU_LOWER_TARGET 0x918 +#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) +#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) +#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) +#define PCIE_ATU_UPPER_TARGET 0x91C + +#define PCIE_LINK_CAPABILITY 0x7C +#define PCIE_LINK_CTL_2 0xA0 +#define TARGET_LINK_SPEED_MASK 0xF +#define LINK_SPEED_GEN_1 0x1 +#define LINK_SPEED_GEN_2 0x2 +#define LINK_SPEED_GEN_3 0x3 + +#define PCIE_GEN3_RELATED 0x890 +#define GEN3_EQU_DISABLE (1 << 16) +#define GEN3_ZRXDC_NON_COMP (1 << 0) + +#define PCIE_GEN3_EQU_CTRL 0x8A8 +#define GEN3_EQU_EVAL_2MS_DISABLE (1 << 5) + +#define PCIE_ROOT_COMPLEX_MODE_MASK (0xF << 4) + +#define PCIE_LINK_UP_TIMEOUT_MS 100 + +#define PCIE_GLOBAL_CONTROL 0x8000 +#define PCIE_APP_LTSSM_EN (1 << 2) +#define PCIE_DEVICE_TYPE_OFFSET (4) +#define PCIE_DEVICE_TYPE_MASK (0xF) +#define PCIE_DEVICE_TYPE_EP (0x0) /* Endpoint */ +#define PCIE_DEVICE_TYPE_LEP (0x1) /* Legacy endpoint */ +#define PCIE_DEVICE_TYPE_RC (0x4) /* Root complex */ + +#define PCIE_GLOBAL_STATUS 0x8008 +#define PCIE_GLB_STS_RDLH_LINK_UP (1 << 1) +#define PCIE_GLB_STS_PHY_LINK_UP (1 << 9) + +#define PCIE_ARCACHE_TRC 0x8050 +#define PCIE_AWCACHE_TRC 0x8054 +#define ARCACHE_SHAREABLE_CACHEABLE 0x3511 +#define AWCACHE_SHAREABLE_CACHEABLE 0x5311 + +#define LINK_SPEED_GEN_1 0x1 +#define LINK_SPEED_GEN_2 0x2 +#define LINK_SPEED_GEN_3 0x3 + +/** + * struct pcie_dw_mvebu - MVEBU DW PCIe controller state + * + * @ctrl_base: The base address of the register space + * @cfg_base: The base address of the configuration space + * @cfg_size: The size of the configuration space which is needed + * as it gets written into the PCIE_ATU_LIMIT register + * @first_busno: This driver supports multiple PCIe controllers. + * first_busno stores the bus number of the PCIe root-port + * number which may vary depending on the PCIe setup + * (PEX switches etc). + */ +struct pcie_dw_mvebu { + void *ctrl_base; + void *cfg_base; + fdt_size_t cfg_size; + int first_busno; +}; + +static int pcie_dw_get_link_speed(const void *regs_base) +{ + return (readl(regs_base + PCIE_LINK_STATUS_REG) & + PCIE_LINK_STATUS_SPEED_MASK) >> PCIE_LINK_STATUS_SPEED_OFF; +} + +static int pcie_dw_get_link_width(const void *regs_base) +{ + return (readl(regs_base + PCIE_LINK_STATUS_REG) & + PCIE_LINK_STATUS_WIDTH_MASK) >> PCIE_LINK_STATUS_WIDTH_OFF; +} + +/** + * set_cfg_address() - Configure the PCIe controller config space access + * + * @pcie: Pointer to the PCI controller state + * @d: PCI device to access + * @where: Offset in the configuration space + * + * Configures the PCIe controller to access the configuration space of + * a specific PCIe device and returns the address to use for this + * access. + * + * Return: Address that can be used to access the configation space + * of the requested device / offset + */ +static uintptr_t set_cfg_address(struct pcie_dw_mvebu *pcie, + pci_dev_t d, uint where) +{ + uintptr_t va_address; + + /* + * Region #0 is used for Outbound CFG space access. + * Direction = Outbound + * Region Index = 0 + */ + writel(0, pcie->ctrl_base + PCIE_ATU_VIEWPORT); + + if (PCI_BUS(d) == (pcie->first_busno + 1)) + /* For local bus, change TLP Type field to 4. */ + writel(PCIE_ATU_TYPE_CFG0, pcie->ctrl_base + PCIE_ATU_CR1); + else + /* Otherwise, change TLP Type field to 5. */ + writel(PCIE_ATU_TYPE_CFG1, pcie->ctrl_base + PCIE_ATU_CR1); + + if (PCI_BUS(d) == pcie->first_busno) { + /* Accessing root port configuration space. */ + va_address = (uintptr_t)pcie->ctrl_base; + } else { + writel(d << 8, pcie->ctrl_base + PCIE_ATU_LOWER_TARGET); + va_address = (uintptr_t)pcie->cfg_base; + } + + va_address += where & ~0x3; + + return va_address; +} + +/** + * pcie_dw_addr_valid() - Check for valid bus address + * + * @d: The PCI device to access + * @first_busno: Bus number of the PCIe controller root complex + * + * Return 1 (true) if the PCI device can be accessed by this controller. + * + * Return: 1 on valid, 0 on invalid + */ +static int pcie_dw_addr_valid(pci_dev_t d, int first_busno) +{ + if ((PCI_BUS(d) == first_busno) && (PCI_DEV(d) > 0)) + return 0; + if ((PCI_BUS(d) == first_busno + 1) && (PCI_DEV(d) > 0)) + return 0; + + return 1; +} + +/** + * pcie_dw_mvebu_read_config() - Read from configuration space + * + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @valuep: A pointer at which to store the read value + * @size: Indicates the size of access to perform + * + * Read a value of size @size from offset @offset within the configuration + * space of the device identified by the bus, device & function numbers in @bdf + * on the PCI bus @bus. + * + * Return: 0 on success + */ +static int pcie_dw_mvebu_read_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size) +{ + struct pcie_dw_mvebu *pcie = dev_get_priv(bus); + uintptr_t va_address; + ulong value; + + debug("PCIE CFG read: (b,d,f)=(%2d,%2d,%2d) ", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + + if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) { + debug("- out of range\n"); + *valuep = pci_get_ff(size); + return 0; + } + + va_address = set_cfg_address(pcie, bdf, offset); + + value = readl(va_address); + + debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value); + *valuep = pci_conv_32_to_size(value, offset, size); + + return 0; +} + +/** + * pcie_dw_mvebu_write_config() - Write to configuration space + * + * @bus: Pointer to the PCI bus + * @bdf: Identifies the PCIe device to access + * @offset: The offset into the device's configuration space + * @value: The value to write + * @size: Indicates the size of access to perform + * + * Write the value @value of size @size from offset @offset within the + * configuration space of the device identified by the bus, device & function + * numbers in @bdf on the PCI bus @bus. + * + * Return: 0 on success + */ +static int pcie_dw_mvebu_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + struct pcie_dw_mvebu *pcie = dev_get_priv(bus); + uintptr_t va_address; + ulong old; + + debug("PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ", + PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf)); + debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value); + + if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) { + debug("- out of range\n"); + return 0; + } + + va_address = set_cfg_address(pcie, bdf, offset); + + old = readl(va_address); + value = pci_conv_size_to_32(old, value, offset, size); + writel(value, va_address); + + return 0; +} + +/** + * pcie_dw_configure() - Configure link capabilities and speed + * + * @regs_base: A pointer to the PCIe controller registers + * @cap_speed: The capabilities and speed to configure + * + * Configure the link capabilities and speed in the PCIe root complex. + */ +static void pcie_dw_configure(const void *regs_base, u32 cap_speed) +{ + /* + * TODO (shadi@marvell.com, sr@denx.de): + * Need to read the serdes speed from the dts and according to it + * configure the PCIe gen + */ + + /* Set link to GEN 3 */ + clrsetbits_le32(regs_base + PCIE_LINK_CTL_2, + TARGET_LINK_SPEED_MASK, cap_speed); + clrsetbits_le32(regs_base + PCIE_LINK_CAPABILITY, + TARGET_LINK_SPEED_MASK, cap_speed); + setbits_le32(regs_base + PCIE_GEN3_EQU_CTRL, GEN3_EQU_EVAL_2MS_DISABLE); +} + +/** + * is_link_up() - Return the link state + * + * @regs_base: A pointer to the PCIe controller registers + * + * Return: 1 (true) for active line and 0 (false) for no link + */ +static int is_link_up(const void *regs_base) +{ + u32 mask = PCIE_GLB_STS_RDLH_LINK_UP | PCIE_GLB_STS_PHY_LINK_UP; + u32 reg; + + reg = readl(regs_base + PCIE_GLOBAL_STATUS); + if ((reg & mask) == mask) + return 1; + + return 0; +} + +/** + * wait_link_up() - Wait for the link to come up + * + * @regs_base: A pointer to the PCIe controller registers + * + * Return: 1 (true) for active line and 0 (false) for no link (timeout) + */ +static int wait_link_up(const void *regs_base) +{ + unsigned long timeout; + + timeout = get_timer(0) + PCIE_LINK_UP_TIMEOUT_MS; + while (!is_link_up(regs_base)) { + if (get_timer(0) > timeout) + return 0; + }; + + return 1; +} + +/** + * pcie_dw_mvebu_pcie_link_up() - Configure the PCIe root port + * + * @regs_base: A pointer to the PCIe controller registers + * @cap_speed: The capabilities and speed to configure + * + * Configure the PCIe controller root complex depending on the + * requested link capabilities and speed. + * + * Return: 1 (true) for active line and 0 (false) for no link + */ +static int pcie_dw_mvebu_pcie_link_up(const void *regs_base, u32 cap_speed) +{ + if (!is_link_up(regs_base)) { + /* Disable LTSSM state machine to enable configuration */ + clrbits_le32(regs_base + PCIE_GLOBAL_CONTROL, + PCIE_APP_LTSSM_EN); + } + + clrsetbits_le32(regs_base + PCIE_GLOBAL_CONTROL, + PCIE_DEVICE_TYPE_MASK << PCIE_DEVICE_TYPE_OFFSET, + PCIE_DEVICE_TYPE_RC << PCIE_DEVICE_TYPE_OFFSET); + + /* Set the PCIe master AXI attributes */ + writel(ARCACHE_SHAREABLE_CACHEABLE, regs_base + PCIE_ARCACHE_TRC); + writel(AWCACHE_SHAREABLE_CACHEABLE, regs_base + PCIE_AWCACHE_TRC); + + /* DW pre link configurations */ + pcie_dw_configure(regs_base, cap_speed); + + if (!is_link_up(regs_base)) { + /* Configuration done. Start LTSSM */ + setbits_le32(regs_base + PCIE_GLOBAL_CONTROL, + PCIE_APP_LTSSM_EN); + } + + /* Check that link was established */ + if (!wait_link_up(regs_base)) + return 0; + + /* + * Link can be established in Gen 1. still need to wait + * till MAC nagaotiation is completed + */ + udelay(100); + + return 1; +} + +/** + * pcie_dw_regions_setup() - iATU region setup + * + * @pcie: Pointer to the PCI controller state + * + * Configure the iATU regions in the PCIe controller for outbound access. + */ +static void pcie_dw_regions_setup(struct pcie_dw_mvebu *pcie) +{ + /* + * Region #0 is used for Outbound CFG space access. + * Direction = Outbound + * Region Index = 0 + */ + writel(0, pcie->ctrl_base + PCIE_ATU_VIEWPORT); + + writel((u32)(uintptr_t)pcie->cfg_base, pcie->ctrl_base + + PCIE_ATU_LOWER_BASE); + writel(0, pcie->ctrl_base + PCIE_ATU_UPPER_BASE); + writel((u32)(uintptr_t)pcie->cfg_base + pcie->cfg_size, + pcie->ctrl_base + PCIE_ATU_LIMIT); + + writel(0, pcie->ctrl_base + PCIE_ATU_LOWER_TARGET); + writel(0, pcie->ctrl_base + PCIE_ATU_UPPER_TARGET); + writel(PCIE_ATU_TYPE_CFG0, pcie->ctrl_base + PCIE_ATU_CR1); + writel(PCIE_ATU_ENABLE, pcie->ctrl_base + PCIE_ATU_CR2); +} + +/** + * pcie_dw_set_host_bars() - Configure the host BARs + * + * @regs_base: A pointer to the PCIe controller registers + * + * Configure the host BARs of the PCIe controller root port so that + * PCI(e) devices may access the system memory. + */ +static void pcie_dw_set_host_bars(const void *regs_base) +{ + u32 size = gd->ram_size; + u64 max_size; + u32 reg; + u32 bar0; + + /* Verify the maximal BAR size */ + reg = readl(regs_base + RESIZABLE_BAR_CAP); + max_size = 1ULL << (5 + (reg + (1 << 4))); + + if (size > max_size) { + size = max_size; + printf("Warning: PCIe BARs can't map all DRAM space\n"); + } + + /* Set the BAR base and size towards DDR */ + bar0 = CONFIG_SYS_SDRAM_BASE & ~0xf; + bar0 |= PCI_BASE_ADDRESS_MEM_TYPE_32; + writel(CONFIG_SYS_SDRAM_BASE, regs_base + PCIE_CONFIG_BAR0); + + reg = ((size >> 20) - 1) << 12; + writel(size, regs_base + RESIZABLE_BAR_CTL0); +} + +/** + * pcie_dw_mvebu_probe() - Probe the PCIe bus for active link + * + * @dev: A pointer to the device being operated on + * + * Probe for an active link on the PCIe bus and configure the controller + * to enable this port. + * + * Return: 0 on success, else -ENODEV + */ +static int pcie_dw_mvebu_probe(struct udevice *dev) +{ + struct pcie_dw_mvebu *pcie = dev_get_priv(dev); + struct udevice *ctlr = pci_get_controller(dev); + struct pci_controller *hose = dev_get_uclass_priv(ctlr); + + pcie->first_busno = dev->seq; + + /* Don't register host if link is down */ + if (!pcie_dw_mvebu_pcie_link_up(pcie->ctrl_base, LINK_SPEED_GEN_3)) { + printf("PCIE-%d: Link down\n", dev->seq); + return -ENODEV; + } + + printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev->seq, + pcie_dw_get_link_speed(pcie->ctrl_base), + pcie_dw_get_link_width(pcie->ctrl_base), hose->first_busno); + + pcie_dw_regions_setup(pcie); + + /* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */ + clrsetbits_le32(pcie->ctrl_base + PCI_CLASS_REVISION, + 0xffff << 16, PCI_CLASS_BRIDGE_PCI << 16); + + pcie_dw_set_host_bars(pcie->ctrl_base); + + return 0; +} + +/** + * pcie_dw_mvebu_ofdata_to_platdata() - Translate from DT to device state + * + * @dev: A pointer to the device being operated on + * + * Translate relevant data from the device tree pertaining to device @dev into + * state that the driver will later make use of. This state is stored in the + * device's private data structure. + * + * Return: 0 on success, else -EINVAL + */ +static int pcie_dw_mvebu_ofdata_to_platdata(struct udevice *dev) +{ + struct pcie_dw_mvebu *pcie = dev_get_priv(dev); + + /* Get the controller base address */ + pcie->ctrl_base = (void *)dev_get_addr_index(dev, 0); + if ((fdt_addr_t)pcie->ctrl_base == FDT_ADDR_T_NONE) + return -EINVAL; + + /* Get the config space base address and size */ + pcie->cfg_base = (void *)dev_get_addr_size_index(dev, 1, + &pcie->cfg_size); + if ((fdt_addr_t)pcie->cfg_base == FDT_ADDR_T_NONE) + return -EINVAL; + + return 0; +} + +static const struct dm_pci_ops pcie_dw_mvebu_ops = { + .read_config = pcie_dw_mvebu_read_config, + .write_config = pcie_dw_mvebu_write_config, +}; + +static const struct udevice_id pcie_dw_mvebu_ids[] = { + { .compatible = "marvell,armada8k-pcie" }, + { } +}; + +U_BOOT_DRIVER(pcie_dw_mvebu) = { + .name = "pcie_dw_mvebu", + .id = UCLASS_PCI, + .of_match = pcie_dw_mvebu_ids, + .ops = &pcie_dw_mvebu_ops, + .ofdata_to_platdata = pcie_dw_mvebu_ofdata_to_platdata, + .probe = pcie_dw_mvebu_probe, + .priv_auto_alloc_size = sizeof(struct pcie_dw_mvebu), +};