From: Jon Loeliger Date: Tue, 9 May 2006 13:23:49 +0000 (-0500) Subject: Get MPC8641HPCN flash images working. X-Git-Tag: U-Boot-1_1_6~20^2~3^2~61^2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8;p=u-boot Get MPC8641HPCN flash images working. Enable the CFI driver. Remove bogus LAWBAR7 cruft. Use correct TEXT_BASE, Fixup load script. Enable SPD EEPROM during DDR setup. Use generic RFC 1918 IP addresses by default. --- diff --git a/board/mpc8641hpcn/config.mk b/board/mpc8641hpcn/config.mk index 63b9779af0..4bdceec4dc 100644 --- a/board/mpc8641hpcn/config.mk +++ b/board/mpc8641hpcn/config.mk @@ -25,8 +25,7 @@ # default CCSRBAR is at 0xff700000 # assume U-Boot is less than 0.5MB # -#TEXT_BASE = 0xfff01000 -TEXT_BASE = 0x00400000 +TEXT_BASE = 0xfff01000 PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/mpc8641hpcn/init.S b/board/mpc8641hpcn/init.S index 9d43de5539..4d555a509f 100644 --- a/board/mpc8641hpcn/init.S +++ b/board/mpc8641hpcn/init.S @@ -80,23 +80,6 @@ #define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M)) -/* - * Rapid IO at 0xc000_0000 for 512 M - */ -/* -#ifdef CFG_INIT_RAM_LOCK -#define LAWBAR7 ((CFG_RIO_MEM_BASE>>12) & 0xffffff) -#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) -#endif -*/ -/* - * Stack at 0xfc00_0000 for 32M on LBC - */ -#if !defined(CFG_INIT_RAM_LOCK) -#define LAWBAR7 ((CFG_INIT_RAM_ADDR>>12) & 0xffffff) -#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M)) -#endif - .section .bootpg, "ax" .globl law_entry law_entry: diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds index dbe8e4fab1..c5c40e7eb4 100644 --- a/board/mpc8641hpcn/u-boot.lds +++ b/board/mpc8641hpcn/u-boot.lds @@ -28,7 +28,7 @@ SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/ __DYNAMIC = 0; */ SECTIONS { -/* .resetvec 0xFFF00100 : + .resetvec 0xFFF00100 : { *(.resetvec) } = 0xffff @@ -38,7 +38,7 @@ SECTIONS cpu/mpc86xx/start.o (.bootpg) board/mpc8641hpcn/init.o (.bootpg) } = 0xffff -*/ + /* Read-only sections, merged into text segment: */ . = + 1024; .interp : { *(.interp) } diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 76efd7c604..d4a28edf9b 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -51,6 +51,7 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #undef CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ #define CONFIG_DDR_ECC /* only for ECC DDR module */ @@ -102,11 +103,9 @@ #else /* - * Manually set up DDR parameters + * Manually set up DDR1 parameters */ -/* DDR I */ -#if 1 #define CFG_SDRAM_SIZE 256 /* DDR is 256MB */ #define CFG_DDR_CS0_BNDS 0x0000000F @@ -125,15 +124,14 @@ #define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ #define CFG_DDR_CONTROL2 0x04400000 - //Not used in fixed_sdram function + /* Not used in fixed_sdram function */ #define CFG_DDR_MODE 0x00000022 #define CFG_DDR_CS1_BNDS 0x00000000 - #define CFG_DDR_CS2_BNDS 0x00000FFF //Not done - #define CFG_DDR_CS3_BNDS 0x00000FFF //Not done - #define CFG_DDR_CS4_BNDS 0x00000FFF //Not done - #define CFG_DDR_CS5_BNDS 0x00000FFF //Not done -#endif + #define CFG_DDR_CS2_BNDS 0x00000FFF /* Not done */ + #define CFG_DDR_CS3_BNDS 0x00000FFF /* Not done */ + #define CFG_DDR_CS4_BNDS 0x00000FFF /* Not done */ + #define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */ #endif @@ -190,6 +188,7 @@ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI #define CFG_FLASH_EMPTY_INFO @@ -199,14 +198,14 @@ #undef CFG_RAMBOOT #endif -#if !defined(CFG_RAMBOOT) -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ +#if !defined(CONFIG_SPD_EEPROM) && !defined(CFG_RAMBOOT) +#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #endif #undef CONFIG_CLOCKS_IN_MHZ #define CONFIG_L1_INIT_RAM -#undef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_LOCK 1 #ifndef CFG_INIT_RAM_LOCK #define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ #else @@ -540,22 +539,21 @@ #define CONFIG_HAS_ETH2 1 #define CONFIG_HAS_ETH3 1 -#define CONFIG_IPADDR 10.82.193.138 +#define CONFIG_IPADDR 192.168.1.100 #define CONFIG_HOSTNAME unknown #define CONFIG_ROOTPATH /opt/nfsroot #define CONFIG_BOOTFILE uImage #define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 10.82.193.104 +#define CONFIG_GATEWAYIP 192.168.1.1 #define CONFIG_NETMASK 255.255.255.0 /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -//#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ -#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200" +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200