From: Hannes Schmelzer Date: Tue, 9 Jan 2018 18:01:36 +0000 (+0100) Subject: board/BuR: drop LCDC clock manipulation from board code X-Git-Tag: v2018.03-rc1~208^2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=193f6fb9e8659b63afcd09f24fec92d70497ccf5;p=u-boot board/BuR: drop LCDC clock manipulation from board code The clock selection is done now from the am335x-fb code, so there is no more need doing this in the board code. Signed-off-by: Hannes Schmelzer Reviewed-by: Anatolij Gustschin --- diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c index 6083479f2b..9f7b2d98a6 100644 --- a/board/BuR/brppt1/board.c +++ b/board/BuR/brppt1/board.c @@ -120,9 +120,6 @@ void am33xx_spl_board_init(void) }; do_enable_clocks(clk_domains, clk_modules_tsspecific, 1); - /* setup LCD-Pixel Clock */ - writel(0x2, &cmdpll->clklcdcpixelclk); /* clock comes from perPLL M2 */ - /* setup I2C */ enable_i2c_pin_mux(); i2c_set_bus_num(0); diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c index ca08f3cd90..7e83437021 100644 --- a/board/BuR/brxre1/board.c +++ b/board/BuR/brxre1/board.c @@ -114,8 +114,6 @@ void am33xx_spl_board_init(void) 0 }; do_enable_clocks(clk_domains, clk_modules_xre1specific, 1); - /* setup LCD-Pixel Clock */ - writel(0x2, CM_DPLL + 0x34); /* power-OFF LCD-Display */ gpio_direction_output(LCD_PWR, 0);