From: Hideyuki Sano Date: Wed, 27 Jun 2012 01:35:35 +0000 (+0900) Subject: arm: rmobile: Add support for ATMARK-TECHNO Armadillo-800EVA board X-Git-Tag: v2012.10-rc3~15^2~26 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=1a31ca4a788ca197bad26f64a2c96350478cc9ba;p=u-boot arm: rmobile: Add support for ATMARK-TECHNO Armadillo-800EVA board The Armadillo-800EVA board has Renesas R-Mobile R8A7740, 512MB DDR3-SDRAM, Ethernet, and more. This patch supports the following functions: - 512MB DDR3-SDRAM - Serial console (SCIF) - Ethernet MAC(MII) & PHY(SMSC) Signed-off-by: Hideyuki Sano Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Nobuhiro Iwamatsu --- diff --git a/MAINTAINERS b/MAINTAINERS index 7c925d4e40..ed85406467 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -994,6 +994,10 @@ Nobuhiro Iwamatsu kzm9g SH73A0 (RMOBILE SoC) +Nobuhiro Iwamatsu + + armadillo-800eva R8A7740 (RMOBILE SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards: diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 5f9994ec90..a676b6d905 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -1105,6 +1105,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_UBISYS_P9D_EVP 3493 #define MACH_TYPE_ATDGP318 3494 #define MACH_TYPE_OMAP5_SEVM 3777 +#define MACH_TYPE_ARMADILLO_800EVA 3863 #define MACH_TYPE_KZM9G 4140 #ifdef CONFIG_ARCH_EBSA110 @@ -14223,6 +14224,18 @@ extern unsigned int __machine_arch_type; # define machine_is_omap5_sevm() (0) #endif +#ifdef CONFIG_MACH_ARMADILLO800EVA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ARMADILLO800EVA +# endif +# define machine_is_armadillo800eva() (machine_arch_type == MACH_TYPE_ARMADILLO800EVA) +#else +# define machine_is_armadillo800eva() (0) +#endif + #ifdef CONFIG_MACH_KZM9G # ifdef machine_arch_type # undef machine_arch_type diff --git a/board/atmark-techno/armadillo-800eva/Makefile b/board/atmark-techno/armadillo-800eva/Makefile new file mode 100644 index 0000000000..9f9618b518 --- /dev/null +++ b/board/atmark-techno/armadillo-800eva/Makefile @@ -0,0 +1,46 @@ +# +# Copyright (C) 2012 Nobuhiro Iwamatsu +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += armadillo-800eva.o +COBJS := $(COBJS-y) + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### + diff --git a/board/atmark-techno/armadillo-800eva/armadillo-800eva.c b/board/atmark-techno/armadillo-800eva/armadillo-800eva.c new file mode 100644 index 0000000000..2f91666a78 --- /dev/null +++ b/board/atmark-techno/armadillo-800eva/armadillo-800eva.c @@ -0,0 +1,331 @@ +/* + * Copyright (C) 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define s_init_wait(cnt) \ + ({ \ + volatile u32 i = 0x10000 * cnt; \ + while (i > 0) \ + i--; \ + }) + +#define USBCR1 0xE605810A + +void s_init(void) +{ + struct r8a7740_rwdt *rwdt0 = (struct r8a7740_rwdt *)RWDT0_BASE; + struct r8a7740_rwdt *rwdt1 = (struct r8a7740_rwdt *)RWDT1_BASE; + struct r8a7740_cpg *cpg = (struct r8a7740_cpg *)CPG_BASE; + struct r8a7740_bsc *bsc = (struct r8a7740_bsc *)BSC_BASE; + struct r8a7740_ddrp *ddrp = (struct r8a7740_ddrp *)DDRP_BASE; + struct r8a7740_dbsc *dbsc = (struct r8a7740_dbsc *)DBSC_BASE; + + /* Watchdog init */ + writew(0xA500, &rwdt0->rwtcsra0); + writew(0xA500, &rwdt1->rwtcsra0); + + /* CPG */ + writel(0xFF800080, &cpg->rmstpcr4); + writel(0xFF800080, &cpg->smstpcr4); + + /* USB clock */ + writel(0x00000080, &cpg->usbckcr); + s_init_wait(1); + + /* USBCR1 */ + writew(0x0710, USBCR1); + + /* FRQCR */ + writel(0x00000000, &cpg->frqcrb); + writel(0x62030533, &cpg->frqcra); + writel(0x208A354E, &cpg->frqcrc); + writel(0x80331050, &cpg->frqcrb); + s_init_wait(1); + + writel(0x00000000, &cpg->frqcrd); + s_init_wait(1); + + /* SUBClk */ + writel(0x0000010B, &cpg->subckcr); + + /* PLL */ + writel(0x00004004, &cpg->pllc01cr); + s_init_wait(1); + + writel(0xa0000000, &cpg->pllc2cr); + s_init_wait(2); + + /* BSC */ + writel(0x0000001B, &bsc->cmncr); + + writel(0x20000000, &dbsc->dbcmd); + writel(0x10009C40, &dbsc->dbcmd); + s_init_wait(1); + + writel(0x00000007, &dbsc->dbkind); + writel(0x0E030A02, &dbsc->dbconf0); + writel(0x00000001, &dbsc->dbphytype); + writel(0x00000000, &dbsc->dbbl); + writel(0x00000006, &dbsc->dbtr0); + writel(0x00000005, &dbsc->dbtr1); + writel(0x00000000, &dbsc->dbtr2); + writel(0x00000006, &dbsc->dbtr3); + writel(0x00080006, &dbsc->dbtr4); + writel(0x00000015, &dbsc->dbtr5); + writel(0x0000000f, &dbsc->dbtr6); + writel(0x00000004, &dbsc->dbtr7); + writel(0x00000018, &dbsc->dbtr8); + writel(0x00000006, &dbsc->dbtr9); + writel(0x00000006, &dbsc->dbtr10); + writel(0x0000000F, &dbsc->dbtr11); + writel(0x0000000D, &dbsc->dbtr12); + writel(0x000000A0, &dbsc->dbtr13); + writel(0x000A0003, &dbsc->dbtr14); + writel(0x00000003, &dbsc->dbtr15); + writel(0x40005005, &dbsc->dbtr16); + writel(0x0C0C0000, &dbsc->dbtr17); + writel(0x00000200, &dbsc->dbtr18); + writel(0x00000040, &dbsc->dbtr19); + writel(0x00000001, &dbsc->dbrnk0); + writel(0x00000110, &dbsc->dbdficnt); + writel(0x00000101, &ddrp->funcctrl); + writel(0x00000001, &ddrp->dllctrl); + writel(0x00000186, &ddrp->zqcalctrl); + writel(0xB3440051, &ddrp->zqodtctrl); + writel(0x94449443, &ddrp->rdctrl); + writel(0x000000C0, &ddrp->rdtmg); + writel(0x00000101, &ddrp->fifoinit); + writel(0x02060506, &ddrp->outctrl); + writel(0x00004646, &ddrp->dqcalofs1); + writel(0x00004646, &ddrp->dqcalofs2); + writel(0x800000aa, &ddrp->dqcalexp); + writel(0x00000000, &ddrp->dllctrl); + writel(0x00000000, DDRPNCNT); + + writel(0x0000000C, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x00000002, DDRPNCNT); + + writel(0x0000000C, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x00000187, &ddrp->zqcalctrl); + + writel(0x00009C40, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x00009C40, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x00000010, &dbsc->dbdficnt); + writel(0x02060507, &ddrp->outctrl); + + writel(0x00009C40, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x21009C40, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x00009C40, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x00009C40, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x00009C40, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x00009C40, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x11000044, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x2A000000, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x2B000000, &dbsc->dbcmd); + readl(&dbsc->dbwait); + + writel(0x29000004, &dbsc->dbcmd); + readl(&dbsc->dbwait); + + writel(0x28001520, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x03000200, &dbsc->dbcmd); + readl(&dbsc->dbwait); + s_init_wait(1); + + writel(0x000001FF, &dbsc->dbrfcnf0); + writel(0x00010C30, &dbsc->dbrfcnf1); + writel(0x00000000, &dbsc->dbrfcnf2); + + writel(0x00000001, &dbsc->dbrfen); + writel(0x00000001, &dbsc->dbacen); + + /* BSC */ + writel(0x00410400, &bsc->cs0bcr); + writel(0x00410400, &bsc->cs2bcr); + writel(0x00410400, &bsc->cs5bbcr); + writel(0x02CB0400, &bsc->cs6abcr); + + writel(0x00000440, &bsc->cs0wcr); + writel(0x00000440, &bsc->cs2wcr); + writel(0x00000240, &bsc->cs5bwcr); + writel(0x00000240, &bsc->cs6awcr); + + writel(0x00000005, &bsc->rbwtcnt); + writel(0x00000002, &bsc->cs0wcr2); + writel(0x00000002, &bsc->cs2wcr2); + writel(0x00000002, &bsc->cs4wcr2); +} + +#define GPIO_ICCR (0xE60581A0) +#define ICCR_15BIT (1 << 15) /* any time 1 */ +#define IIC0_CONTA (1 << 7) +#define IIC0_CONTB (1 << 6) +#define IIC1_CONTA (1 << 5) +#define IIC1_CONTB (1 << 4) +#define IIC0_PS33E (1 << 1) +#define IIC1_PS33E (1 << 0) +#define GPIO_ICCR_DATA \ + (ICCR_15BIT | \ + IIC0_CONTA | IIC0_CONTB | IIC1_CONTA | \ + IIC1_CONTB | IIC0_PS33E | IIC1_PS33E) + +#define MSTPCR1 0xE6150134 +#define TMU0_MSTP125 (1 << 25) +#define I2C0_MSTP116 (1 << 16) + +#define MSTPCR3 0xE615013C +#define I2C1_MSTP323 (1 << 23) +#define GETHER_MSTP309 (1 << 9) + +int board_early_init_f(void) +{ + /* TMU */ + clrbits_le32(MSTPCR1, TMU0_MSTP125); + + /* GETHER */ + clrbits_le32(MSTPCR3, GETHER_MSTP309); + + /* I2C 0/1 */ + clrbits_le32(MSTPCR1, I2C0_MSTP116); + clrbits_le32(MSTPCR3, I2C1_MSTP323); + + /* SCIFA1 */ + r8a7740_pinmux_init(); + gpio_request(GPIO_FN_SCIFA1_RXD, NULL); + gpio_request(GPIO_FN_SCIFA1_TXD, NULL); + + /* IICCR */ + writew(GPIO_ICCR_DATA, GPIO_ICCR); + + return 0; +} + +DECLARE_GLOBAL_DATA_PTR; +int board_init(void) +{ + /* board id for linux */ + gd->bd->bi_arch_number = MACH_TYPE_ARMADILLO_800EVA; + /* adress of boot parameters */ + gd->bd->bi_boot_params = ARMADILLO_800EVA_SDRAM_BASE + 0x100; + + /* Init PFC controller */ + r8a7740_pinmux_init(); + + /* GETHER Enable */ + gpio_request(GPIO_FN_ET_CRS, NULL); + gpio_request(GPIO_FN_ET_MDC, NULL); + gpio_request(GPIO_FN_ET_MDIO, NULL); + gpio_request(GPIO_FN_ET_TX_ER, NULL); + gpio_request(GPIO_FN_ET_RX_ER, NULL); + gpio_request(GPIO_FN_ET_ERXD0, NULL); + gpio_request(GPIO_FN_ET_ERXD1, NULL); + gpio_request(GPIO_FN_ET_ERXD2, NULL); + gpio_request(GPIO_FN_ET_ERXD3, NULL); + gpio_request(GPIO_FN_ET_TX_CLK, NULL); + gpio_request(GPIO_FN_ET_TX_EN, NULL); + gpio_request(GPIO_FN_ET_ETXD0, NULL); + gpio_request(GPIO_FN_ET_ETXD1, NULL); + gpio_request(GPIO_FN_ET_ETXD2, NULL); + gpio_request(GPIO_FN_ET_ETXD3, NULL); + gpio_request(GPIO_FN_ET_PHY_INT, NULL); + gpio_request(GPIO_FN_ET_COL, NULL); + gpio_request(GPIO_FN_ET_RX_DV, NULL); + gpio_request(GPIO_FN_ET_RX_CLK, NULL); + + gpio_request(GPIO_PORT18, NULL); /* PHY_RST */ + gpio_direction_output(GPIO_PORT18, 1); + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return sh_eth_initialize(bis); +} + +const struct rmobile_sysinfo sysinfo = { + CONFIG_RMOBILE_BOARD_STRING +}; + +int board_late_init(void) +{ + return 0; +} + +void reset_cpu(ulong addr) +{ +} diff --git a/boards.cfg b/boards.cfg index 9599f8e7ee..4f6ae2cdf6 100644 --- a/boards.cfg +++ b/boards.cfg @@ -273,6 +273,7 @@ whistler arm armv7:arm720t whistler nvidia u8500_href arm armv7 u8500 st-ericsson u8500 snowball arm armv7 snowball st-ericsson u8500 kzm9g arm armv7 kzm9g kmc rmobile +armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8 diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h new file mode 100644 index 0000000000..2f75099997 --- /dev/null +++ b/include/configs/armadillo-800eva.h @@ -0,0 +1,157 @@ +/* + * Configuation settings for the bonito board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ARMADILLO_800EVA_H +#define __ARMADILLO_800EVA_H + +#undef DEBUG +#define CONFIG_ARMV7 +#define CONFIG_R8A7740 +#define CONFIG_RMOBILE +#define CONFIG_RMOBILE_BOARD_STRING "Armadillo-800EVA Board\n" +#define CONFIG_SH_GPIO_PFC + +#include + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_RUN +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define BOARD_LATE_INIT + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "" + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_NO_L2CACHE +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_USE_ARCH_MEMSET +#define CONFIG_USE_ARCH_MEMCPY +#define CONFIG_TMU_TIMER +#define CONFIG_SYS_DCACHE_OFF + +/* STACK */ +#define CONFIG_SYS_INIT_SP_ADDR 0xE8083000 +#define STACK_AREA_SIZE 0xC000 +#define LOW_LEVEL_MERAM_STACK \ + (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + +/* MEMORY */ +#define ARMADILLO_800EVA_SDRAM_BASE 0x40000000 +#define ARMADILLO_800EVA_SDRAM_SIZE (512 * 1024 * 1024) + +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE 512 +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE +#define CONFIG_CONS_SCIF1 +#define SCIF0_BASE 0xe6c40000 +#define SCIF1_BASE 0xe6c50000 +#define SCIF2_BASE 0xe6c60000 +#define SCIF4_BASE 0xe6c80000 +#define CONFIG_SCIF_A +#undef CONFIG_SYS_CONSOLE_INFO_QUIET +#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE + +#define CONFIG_SYS_MEMTEST_START (ARMADILLO_800EVA_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + 504 * 1024 * 1024) +#undef CONFIG_SYS_ALT_MEMTEST +#undef CONFIG_SYS_MEMTEST_SCRATCH +#undef CONFIG_SYS_LOADS_BAUD_CHANGE + +#define CONFIG_SYS_SDRAM_BASE (ARMADILLO_800EVA_SDRAM_BASE) +#define CONFIG_SYS_SDRAM_SIZE (ARMADILLO_800EVA_SDRAM_SIZE) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \ + 64 * 1024 * 1024) +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE (256) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) +#define CONFIG_SYS_TEXT_BASE 0xE80C0000 + +/* FLASH */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_MAX_FLASH_SECT 512 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) } + +#define CONFIG_SYS_FLASH_ERASE_TOUT 3000 +#define CONFIG_SYS_FLASH_WRITE_TOUT 3000 +#define CONFIG_SYS_FLASH_LOCK_TOUT 3000 +#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000 + +/* ENV setting */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR) +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) + +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x0 +#define CONFIG_SH_ETHER_BASE_ADDR 0xe9a00000 +#define CONFIG_SH_ETHER_SH7734_MII (0x01) +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 50000000 +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 + +#endif /* __ARMADILLO_800EVA_H */