From: Justin Maggard Date: Tue, 2 May 2017 18:59:26 +0000 (-0700) Subject: Add support for IT8625E X-Git-Tag: v1.0~24 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=1ae160bdac56c3529a88f578f712993af68a60da;p=groeck-it87 Add support for IT8625E This is mostly identical to IT8665E, with the exception of the configuration bits for fans 4 and 5. Signed-off-by: Justin Maggard Signed-off-by: Guenter Roeck --- diff --git a/README b/README index 0019580..bab93dd 100644 --- a/README +++ b/README @@ -17,6 +17,10 @@ Supported chips: Prefix: 'it8622' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8625E + Prefix: 'it8625' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * IT8628E Prefix: 'it8628' Addresses scanned: from Super I/O config space (8 I/O ports) diff --git a/it87.c b/it87.c index f4513d6..e5328aa 100644 --- a/it87.c +++ b/it87.c @@ -16,6 +16,7 @@ * IT8620E Super I/O chip w/LPC interface * IT8622E Super I/O chip w/LPC interface * IT8623E Super I/O chip w/LPC interface + * IT8625E Super I/O chip w/LPC interface * IT8628E Super I/O chip w/LPC interface * IT8655E Super I/O chip w/LPC interface * IT8665E Super I/O chip w/LPC interface @@ -81,8 +82,8 @@ enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8732, it8771, it8772, it8781, it8782, it8783, it8786, it8790, - it8792, it8603, it8607, it8613, it8620, it8622, it8628, it8655, - it8665, it8686 }; + it8792, it8603, it8607, it8613, it8620, it8622, it8625, it8628, + it8655, it8665, it8686 }; static unsigned short force_id; module_param(force_id, ushort, 0); @@ -215,6 +216,7 @@ static inline void superio_exit(int ioreg) #define IT8620E_DEVID 0x8620 #define IT8622E_DEVID 0x8622 #define IT8623E_DEVID 0x8623 +#define IT8625E_DEVID 0x8625 #define IT8628E_DEVID 0x8628 #define IT8655E_DEVID 0x8655 #define IT8665E_DEVID 0x8665 @@ -591,6 +593,15 @@ static const struct it87_devices it87_devices[] = { .num_temp_limit = 3, .peci_mask = 0x07, }, + [it8625] = { + .name = "it8625", + .suffix = "E", + .features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS + | FEAT_TEMP_OFFSET | FEAT_AVCC3 | FEAT_NEW_TEMPMAP + | FEAT_11MV_ADC | FEAT_IN7_INTERNAL | FEAT_SIX_FANS + | FEAT_SIX_PWM | FEAT_BANK_SEL, + .num_temp_limit = 6, + }, [it8628] = { .name = "it8628", .suffix = "E", @@ -1283,6 +1294,7 @@ static int get_temp_type(struct it87_data *data, int index) break; } break; + case it8625: case it8655: case it8665: if (src1 < 3) { @@ -2835,6 +2847,9 @@ static int __init it87_find(int sioaddr, unsigned short *address, case IT8622E_DEVID: sio_data->type = it8622; break; + case IT8625E_DEVID: + sio_data->type = it8625; + break; case IT8628E_DEVID: sio_data->type = it8628; break; @@ -3178,44 +3193,57 @@ static int __init it87_find(int sioaddr, unsigned short *address, sio_data->beep_pin = superio_inb(sioaddr, IT87_SIO_BEEP_PIN_REG) & 0x3f; - } else if (sio_data->type == it8665) { - int reg; + } else if (sio_data->type == it8665 || sio_data->type == it8625) { + int reg27, reg29, reg2d, regd3; superio_select(sioaddr, GPIO); - /* Check for pwm2 */ - reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG); - if (reg & BIT(1)) - sio_data->skip_pwm |= BIT(1); + reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG); + reg29 = superio_inb(sioaddr, IT87_SIO_GPIO5_REG); + reg2d = superio_inb(sioaddr, IT87_SIO_PINX4_REG); + regd3 = superio_inb(sioaddr, IT87_SIO_GPIO9_REG); - /* Check for fan2 */ - reg = superio_inb(sioaddr, IT87_SIO_PINX4_REG); - if (reg & BIT(4)) + /* Check for pwm2, fan2 */ + if (reg29 & BIT(1)) + sio_data->skip_pwm |= BIT(1); + if (reg2d & BIT(4)) sio_data->skip_fan |= BIT(1); /* Check for pwm3, fan3 */ - reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG); - if (reg & BIT(6)) + if (reg27 & BIT(6)) sio_data->skip_pwm |= BIT(2); - if (reg & BIT(7)) + if (reg27 & BIT(7)) sio_data->skip_fan |= BIT(2); - /* Check for pwm5, fan5 */ - reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG); - if (reg & BIT(5)) - sio_data->skip_pwm |= BIT(4); - if (!(reg & BIT(4))) - sio_data->skip_fan |= BIT(4); + /* Check for pwm4, fan4, pwm5, fan5 */ + if (sio_data->type == it8625) { + int reg25 = superio_inb(sioaddr, IT87_SIO_GPIO1_REG); + + if (reg25 & BIT(6)) + sio_data->skip_fan |= BIT(3); + if (reg25 & BIT(5)) + sio_data->skip_pwm |= BIT(3); + if (reg27 & BIT(3)) + sio_data->skip_pwm |= BIT(4); + if (reg27 & BIT(1)) + sio_data->skip_fan |= BIT(4); + } else { + int reg26 = superio_inb(sioaddr, IT87_SIO_GPIO2_REG); + + if (regd3 & BIT(2)) + sio_data->skip_pwm |= BIT(3); + if (regd3 & BIT(3)) + sio_data->skip_fan |= BIT(3); + if (reg26 & BIT(5)) + sio_data->skip_pwm |= BIT(4); + if (!(reg26 & BIT(4))) + sio_data->skip_fan |= BIT(4); + } - /* Check for pwm4, fan4, pwm6, fan6 */ - reg = superio_inb(sioaddr, IT87_SIO_GPIO9_REG); - if (reg & BIT(2)) - sio_data->skip_pwm |= BIT(3); - if (reg & BIT(3)) - sio_data->skip_fan |= BIT(3); - if (reg & BIT(0)) + /* Check for pwm6, fan6 */ + if (regd3 & BIT(0)) sio_data->skip_pwm |= BIT(5); - if (reg & BIT(1)) + if (regd3 & BIT(1)) sio_data->skip_fan |= BIT(5); sio_data->beep_pin = superio_inb(sioaddr, @@ -3345,6 +3373,7 @@ static void it87_init_regs(struct platform_device *pdev) data->REG_TEMP_LOW = IT87_REG_TEMP_LOW_8686; data->REG_TEMP_HIGH = IT87_REG_TEMP_HIGH_8686; break; + case it8625: case it8655: case it8665: data->REG_FAN = IT87_REG_FAN_8665; @@ -3484,6 +3513,7 @@ static void it87_init_device(struct platform_device *pdev) if (tmp & BIT(2)) data->has_fan |= BIT(5); /* fan6 enabled */ break; + case it8625: case it8665: tmp = it87_read_value(data, IT87_REG_FAN_DIV); if (tmp & BIT(3))