From: Eddie Cai Date: Fri, 15 Dec 2017 00:17:12 +0000 (+0800) Subject: rockchip:usb: add a simple readme for rockusb X-Git-Tag: v2018.03-rc1~211^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=1c977772a68d62bd23ae48fe46d2dcddf89c01c0;p=u-boot rockchip:usb: add a simple readme for rockusb add a simple readme to introduce rockusb and tell people how to use it Signed-off-by: Eddie Cai Reviewed-by: Simon Glass --- diff --git a/MAINTAINERS b/MAINTAINERS index b2316103d5..9b4b63b063 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -493,6 +493,7 @@ M: Eddie Cai S: Maintained F: drivers/usb/gadget/f_rockusb.c F: cmd/rockusb.c +F: doc/README.rockusb VIDEO M: Anatolij Gustschin diff --git a/doc/README.rockusb b/doc/README.rockusb new file mode 100644 index 0000000000..5405dc48c1 --- /dev/null +++ b/doc/README.rockusb @@ -0,0 +1,51 @@ +Rockusb (Rockchip USB protocol) +===================================================== + +Overview +-------- + +Rockusb protocol is widely used by Rockchip SoC based devices. It can +read/write info, image to/from devices. This document briefly describes how to +use Rockusb for upgrading firmware (e.g. kernel, u-boot, rootfs, etc.). + +Tools +-------- +There are many tools can support Rockusb protocol. rkdeveloptool +(https://github.com/rockchip-linux/rkdeveloptool) is open source, +It is maintained by Rockchip. People don't want to build from source +can download from here +(https://github.com/rockchip-linux/rkbin/blob/master/tools/rkdeveloptool) + +Usage +-------- +The Usage of Rockusb command is: + +rockusb + +e.g. rockusb 0 mmc 0 + +On your U-Boot console, type this command to enter rockusb mode. +On your host PC. use lsusb command. you should see a usb device +using 0x2207 as its USB verdor id. + +for more detail about the rkdeveloptool. please read the usage. + +rkdeveloptool -h + +use rkdeveloptool wl command to write lba. BeginSec is the lba on device +you want to write. + +sudo rkdeveloptool wl + +to flash U-Boot image use below command. U-Boot binary is made by mkimage. +see doc/README.rockchip for more detail about how to get U-Boot binary. + +sudo rkdeveloptool wl 64 + +There are plenty of Rockusb command. but wl(write lba) and +rd(reboot) command. These two command can let people flash +image to device. + +To do +----- +* Fully support Rockusb protocol