From: Detlev Zundel Date: Fri, 3 Apr 2009 09:53:01 +0000 (+0200) Subject: Rename common ns16550 constants with UART_ prefix to prevent conflicts X-Git-Tag: v2009.06-rc1~109 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=200779e3e2a9aeda7030b171a8c39d7797019917;p=u-boot Rename common ns16550 constants with UART_ prefix to prevent conflicts Fix problems introduced in commit 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware diagnosis functions for inka4x0] which redefined MSR_RI which is already used on PowerPC systems. Also eliminate redundant definitions in ps2mult.h. More cleanup will be needed for other redundant occurrences though. Signed-off-by: Detlev Zundel --- diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c index 06c980713b..12c0a85d6e 100644 --- a/board/inka4x0/inkadiag.c +++ b/board/inka4x0/inkadiag.c @@ -280,48 +280,48 @@ static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc, if ((num >= 0) && (num <= 7)) { if (mode & 1) { /* turn on 'loopback' mode */ - out_8(&uart->mcr, MCR_LOOP); + out_8(&uart->mcr, UART_MCR_LOOP); } else { /* * establish the UART's operational parameters * set DLAB=1, so rbr accesses DLL */ - out_8(&uart->lcr, LCR_DLAB); + out_8(&uart->lcr, UART_LCR_DLAB); /* set baudrate */ out_8(&uart->rbr, combrd); /* set data-format: 8-N-1 */ - out_8(&uart->lcr, LCR_WLS_8); + out_8(&uart->lcr, UART_LCR_WLS_8); } if (mode & 2) { /* set request to send */ - out_8(&uart->mcr, MCR_RTS); + out_8(&uart->mcr, UART_MCR_RTS); udelay(10); /* check clear to send */ - if ((in_8(&uart->msr) & MSR_CTS) == 0x00) + if ((in_8(&uart->msr) & UART_MSR_CTS) == 0x00) return -1; } if (mode & 4) { /* set data terminal ready */ - out_8(&uart->mcr, MCR_DTR); + out_8(&uart->mcr, UART_MCR_DTR); udelay(10); /* check data set ready and carrier detect */ - if ((in_8(&uart->msr) & (MSR_DSR | MSR_DCD)) - != (MSR_DSR | MSR_DCD)) + if ((in_8(&uart->msr) & (UART_MSR_DSR | UART_MSR_DCD)) + != (UART_MSR_DSR | UART_MSR_DCD)) return -1; } /* write each message-character, read it back, and display it */ for (i = 0, len = strlen(argv[3]); i < len; ++i) { j = 0; - while ((in_8(&uart->lsr) & LSR_THRE) == 0x00) { + while ((in_8(&uart->lsr) & UART_LSR_THRE) == 0x00) { if (j++ > CONFIG_SYS_HZ) break; udelay(10); } out_8(&uart->rbr, argv[3][i]); j = 0; - while ((in_8(&uart->lsr) & LSR_DR) == 0x00) { + while ((in_8(&uart->lsr) & UART_LSR_DR) == 0x00) { if (j++ > CONFIG_SYS_HZ) break; udelay(10); diff --git a/board/linkstation/avr.c b/board/linkstation/avr.c index fda1b913eb..782b24a71a 100644 --- a/board/linkstation/avr.c +++ b/board/linkstation/avr.c @@ -90,12 +90,12 @@ void init_AVR_DUART (void) */ AVR_port->lcr = 0x00; AVR_port->ier = 0x00; - AVR_port->lcr = LCR_BKSE; + AVR_port->lcr = UART_LCR_BKSE; AVR_port->dll = clock_divisor & 0xff; AVR_port->dlm = (clock_divisor >> 8) & 0xff; - AVR_port->lcr = LCR_WLS_8 | LCR_PEN | LCR_EPS; + AVR_port->lcr = UART_LCR_WLS_8 | UART_LCR_PEN | UART_LCR_EPS; AVR_port->mcr = 0x00; - AVR_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; + AVR_port->fcr = UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR; miconCntl_DisWDT(); diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c index 1af3fde647..1a5e2d43db 100644 --- a/drivers/input/ps2ser.c +++ b/drivers/input/ps2ser.c @@ -1,6 +1,6 @@ /*********************************************************************** * - * (C) Copyright 2004 + * (C) Copyright 2004-2009 * DENX Software Engineering * Wolfgang Denk, wd@denx.de * All rights reserved. @@ -18,9 +18,11 @@ #include #include #include -#if defined(CONFIG_SYS_NS16550) || defined(CONFIG_MPC85xx) -#include +/* This is needed for ns16550.h */ +#ifndef CONFIG_SYS_NS16550_REG_SIZE +#define CONFIG_SYS_NS16550_REG_SIZE 1 #endif +#include DECLARE_GLOBAL_DATA_PTR; @@ -128,12 +130,12 @@ int ps2ser_init(void) NS16550_t com_port = (NS16550_t)COM_BASE; com_port->ier = 0x00; - com_port->lcr = LCR_BKSE | LCR_8N1; + com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1; com_port->dll = (CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff; com_port->dlm = ((CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff; - com_port->lcr = LCR_8N1; - com_port->mcr = (MCR_DTR | MCR_RTS); - com_port->fcr = (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR); + com_port->lcr = UART_LCR_8N1; + com_port->mcr = (UART_MCR_DTR | UART_MCR_RTS); + com_port->fcr = (UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR); return (0); } @@ -202,7 +204,7 @@ void ps2ser_putc(int chr) psc->psc_buffer_8 = chr; #elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555) - while ((com_port->lsr & LSR_THRE) == 0); + while ((com_port->lsr & UART_LSR_THRE) == 0); com_port->thr = chr; #else while (!(ps2ser_in(UART_LSR) & UART_LSR_THRE)); @@ -227,7 +229,7 @@ static int ps2ser_getc_hw(void) } #elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555) - if (com_port->lsr & LSR_DR) { + if (com_port->lsr & UART_LSR_DR) { res = com_port->rbr; } #else @@ -315,7 +317,7 @@ static void ps2ser_interrupt(void *dev_id) } while (status & PSC_SR_RXRDY); #elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \ defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555) - } while (status & LSR_DR); + } while (status & UART_LSR_DR); #else } while (status & UART_IIR_RDI); #endif diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 397f5df5d6..657c9dadf9 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -7,9 +7,12 @@ #include #include -#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */ -#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */ -#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */ +#define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ +#define UART_MCRVAL (UART_MCR_DTR | \ + UART_MCR_RTS) /* RTS/DTR */ +#define UART_FCRVAL (UART_FCR_FIFO_EN | \ + UART_FCR_RXSR | \ + UART_FCR_TXSR) /* Clear & enable FIFOs */ void NS16550_init (NS16550_t com_port, int baud_divisor) { @@ -17,16 +20,16 @@ void NS16550_init (NS16550_t com_port, int baud_divisor) #ifdef CONFIG_OMAP com_port->mdr1 = 0x7; /* mode select reset TL16C750*/ #endif - com_port->lcr = LCR_BKSE | LCRVAL; + com_port->lcr = UART_LCR_BKSE | UART_LCRVAL; com_port->dll = 0; com_port->dlm = 0; - com_port->lcr = LCRVAL; - com_port->mcr = MCRVAL; - com_port->fcr = FCRVAL; - com_port->lcr = LCR_BKSE | LCRVAL; + com_port->lcr = UART_LCRVAL; + com_port->mcr = UART_MCRVAL; + com_port->fcr = UART_FCRVAL; + com_port->lcr = UART_LCR_BKSE | UART_LCRVAL; com_port->dll = baud_divisor & 0xff; com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCRVAL; + com_port->lcr = UART_LCRVAL; #if defined(CONFIG_OMAP) #if defined(CONFIG_APTIX) com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */ @@ -40,29 +43,29 @@ void NS16550_init (NS16550_t com_port, int baud_divisor) void NS16550_reinit (NS16550_t com_port, int baud_divisor) { com_port->ier = 0x00; - com_port->lcr = LCR_BKSE | LCRVAL; + com_port->lcr = UART_LCR_BKSE | UART_LCRVAL; com_port->dll = 0; com_port->dlm = 0; - com_port->lcr = LCRVAL; - com_port->mcr = MCRVAL; - com_port->fcr = FCRVAL; - com_port->lcr = LCR_BKSE; + com_port->lcr = UART_LCRVAL; + com_port->mcr = UART_MCRVAL; + com_port->fcr = UART_FCRVAL; + com_port->lcr = UART_LCR_BKSE; com_port->dll = baud_divisor & 0xff; com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCRVAL; + com_port->lcr = UART_LCRVAL; } #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ void NS16550_putc (NS16550_t com_port, char c) { - while ((com_port->lsr & LSR_THRE) == 0); + while ((com_port->lsr & UART_LSR_THRE) == 0); com_port->thr = c; } #ifndef CONFIG_NS16550_MIN_FUNCTIONS char NS16550_getc (NS16550_t com_port) { - while ((com_port->lsr & LSR_DR) == 0) { + while ((com_port->lsr & UART_LSR_DR) == 0) { #ifdef CONFIG_USB_TTY extern void usbtty_poll(void); usbtty_poll(); @@ -73,7 +76,7 @@ char NS16550_getc (NS16550_t com_port) int NS16550_tstc (NS16550_t com_port) { - return ((com_port->lsr & LSR_DR) != 0); + return ((com_port->lsr & UART_LSR_DR) != 0); } #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ diff --git a/include/ns16550.h b/include/ns16550.h index edfbc53a52..87624bf422 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -1,6 +1,10 @@ /* * NS16550 Serial Port * originally from linux source (arch/ppc/boot/ns16550.h) + * + * Cleanup and unification + * (C) 2009 by Detlev Zundel, DENX Software Engineering GmbH + * * modified slightly to * have addresses as offsets from CONFIG_SYS_ISA_BASE * added a few more definitions @@ -115,53 +119,100 @@ struct NS16550 { typedef volatile struct NS16550 *NS16550_t; -#define FCR_FIFO_EN 0x01 /* Fifo enable */ -#define FCR_RXSR 0x02 /* Receiver soft reset */ -#define FCR_TXSR 0x04 /* Transmitter soft reset */ - -#define MCR_DTR 0x01 -#define MCR_RTS 0x02 -#define MCR_DMA_EN 0x04 -#define MCR_TX_DFR 0x08 -#define MCR_LOOP 0x10 /* Enable loopback test mode */ - -#define LCR_WLS_MSK 0x03 /* character length select mask */ -#define LCR_WLS_5 0x00 /* 5 bit character length */ -#define LCR_WLS_6 0x01 /* 6 bit character length */ -#define LCR_WLS_7 0x02 /* 7 bit character length */ -#define LCR_WLS_8 0x03 /* 8 bit character length */ -#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ -#define LCR_PEN 0x08 /* Parity eneble */ -#define LCR_EPS 0x10 /* Even Parity Select */ -#define LCR_STKP 0x20 /* Stick Parity */ -#define LCR_SBRK 0x40 /* Set Break */ -#define LCR_BKSE 0x80 /* Bank select enable */ -#define LCR_DLAB 0x80 /* Divisor latch access bit */ - -#define LSR_DR 0x01 /* Data ready */ -#define LSR_OE 0x02 /* Overrun */ -#define LSR_PE 0x04 /* Parity error */ -#define LSR_FE 0x08 /* Framing error */ -#define LSR_BI 0x10 /* Break */ -#define LSR_THRE 0x20 /* Xmit holding register empty */ -#define LSR_TEMT 0x40 /* Xmitter empty */ -#define LSR_ERR 0x80 /* Error */ - -#define MSR_DCD 0x80 /* Data Carrier Detect */ -#define MSR_RI 0x40 /* Ring Indicator */ -#define MSR_DSR 0x20 /* Data Set Ready */ -#define MSR_CTS 0x10 /* Clear to Send */ -#define MSR_DDCD 0x08 /* Delta DCD */ -#define MSR_TERI 0x04 /* Trailing edge ring indicator */ -#define MSR_DDSR 0x02 /* Delta DSR */ -#define MSR_DCTS 0x01 /* Delta CTS */ +/* + * These are the definitions for the FIFO Control Register + */ +#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */ +#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ +#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ +#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ +#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ +#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ +#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ +#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ +#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ + +#define UART_FCR_RXSR 0x02 /* Receiver soft reset */ +#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */ + +/* + * These are the definitions for the Modem Control Register + */ +#define UART_MCR_DTR 0x01 /* DTR */ +#define UART_MCR_RTS 0x02 /* RTS */ +#define UART_MCR_OUT1 0x04 /* Out 1 */ +#define UART_MCR_OUT2 0x08 /* Out 2 */ +#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ + +#define UART_MCR_DMA_EN 0x04 +#define UART_MCR_TX_DFR 0x08 + +/* + * These are the definitions for the Line Control Register + * + * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting + * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. + */ +#define UART_LCR_WLS_MSK 0x03 /* character length select mask */ +#define UART_LCR_WLS_5 0x00 /* 5 bit character length */ +#define UART_LCR_WLS_6 0x01 /* 6 bit character length */ +#define UART_LCR_WLS_7 0x02 /* 7 bit character length */ +#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ +#define UART_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ +#define UART_LCR_PEN 0x08 /* Parity eneble */ +#define UART_LCR_EPS 0x10 /* Even Parity Select */ +#define UART_LCR_STKP 0x20 /* Stick Parity */ +#define UART_LCR_SBRK 0x40 /* Set Break */ +#define UART_LCR_BKSE 0x80 /* Bank select enable */ +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_DR 0x01 /* Data ready */ +#define UART_LSR_OE 0x02 /* Overrun */ +#define UART_LSR_PE 0x04 /* Parity error */ +#define UART_LSR_FE 0x08 /* Framing error */ +#define UART_LSR_BI 0x10 /* Break */ +#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ +#define UART_LSR_TEMT 0x40 /* Xmitter empty */ +#define UART_LSR_ERR 0x80 /* Error */ + +#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ +#define UART_MSR_RI 0x40 /* Ring Indicator */ +#define UART_MSR_DSR 0x20 /* Data Set Ready */ +#define UART_MSR_CTS 0x10 /* Clear to Send */ +#define UART_MSR_DDCD 0x08 /* Delta DCD */ +#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define UART_MSR_DDSR 0x02 /* Delta DSR */ +#define UART_MSR_DCTS 0x01 /* Delta CTS */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ + +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ + #ifdef CONFIG_OMAP1510 -#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */ +#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */ #endif /* useful defaults for LCR */ -#define LCR_8N1 0x03 +#define UART_LCR_8N1 0x03 void NS16550_init (NS16550_t com_port, int baud_divisor); void NS16550_putc (NS16550_t com_port, char c); diff --git a/include/ps2mult.h b/include/ps2mult.h index 599cb6dc42..1a38733b76 100644 --- a/include/ps2mult.h +++ b/include/ps2mult.h @@ -53,103 +53,4 @@ struct serial_state { u8 *iomem_base; }; -#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ -#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ - -#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER 1 /* Out: Interrupt Enable Register */ - -#define UART_IIR 2 /* In: Interrupt ID Register */ -#define UART_FCR 2 /* Out: FIFO Control Register */ - -#define UART_LCR 3 /* Out: Line Control Register */ -#define UART_MCR 4 /* Out: Modem Control Register */ -#define UART_LSR 5 /* In: Line Status Register */ -#define UART_MSR 6 /* In: Modem Status Register */ -#define UART_SCR 7 /* I/O: Scratch Register */ - -/* - * These are the definitions for the FIFO Control Register - * (16650 only) - */ -#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ -#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ -#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ -#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ -#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ -#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ - -/* - * These are the definitions for the Line Control Register - * - * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting - * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. - */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_TEMT 0x40 /* Transmitter empty */ -#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -#define UART_LSR_BI 0x10 /* Break interrupt indicator */ -#define UART_LSR_FE 0x08 /* Frame error indicator */ -#define UART_LSR_PE 0x04 /* Parity error indicator */ -#define UART_LSR_OE 0x02 /* Overrun error indicator */ -#define UART_LSR_DR 0x01 /* Receiver data ready */ - -/* - * These are the definitions for the Interrupt Identification Register - */ -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ - -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -/* - * These are the definitions for the Interrupt Enable Register - */ -#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ - -/* - * These are the definitions for the Modem Control Register - */ -#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -#define UART_MCR_OUT2 0x08 /* Out2 complement */ -#define UART_MCR_OUT1 0x04 /* Out1 complement */ -#define UART_MCR_RTS 0x02 /* RTS complement */ -#define UART_MCR_DTR 0x01 /* DTR complement */ - -/* - * These are the definitions for the Modem Status Register - */ -#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ -#define UART_MSR_RI 0x40 /* Ring Indicator */ -#define UART_MSR_DSR 0x20 /* Data Set Ready */ -#define UART_MSR_CTS 0x10 /* Clear to Send */ -#define UART_MSR_DDCD 0x08 /* Delta DCD */ -#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ -#define UART_MSR_DDSR 0x02 /* Delta DSR */ -#define UART_MSR_DCTS 0x01 /* Delta CTS */ -#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ - #endif /* __LINUX_PS2MULT_H */