From: Hans de Goede Date: Wed, 14 Jan 2015 18:28:38 +0000 (+0100) Subject: sunxi: Drop pll6 setting from clock_init_uart X-Git-Tag: v2015.04-rc1~60^2~34 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=22b618346acb95dae8fddf151202829b6f78667f;p=u-boot sunxi: Drop pll6 setting from clock_init_uart As the comment says now that we have SPL support this is no longer necessary, as PLL6 is already setup with the exact same parameters by the SPL. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c index d7a7040b72..e2a78676b1 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -45,10 +45,10 @@ void clock_init_safe(void) void clock_init_uart(void) { +#if CONFIG_CONS_INDEX < 5 struct sunxi_ccm_reg *const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -#if CONFIG_CONS_INDEX < 5 /* uart clock source is apb2 */ writel(APB2_CLK_SRC_OSC24M| APB2_CLK_RATE_N_1| @@ -68,9 +68,6 @@ void clock_init_uart(void) /* enable R_PIO and R_UART clocks, and de-assert resets */ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART); #endif - - /* Dup with clock_init_safe(), drop once sun6i SPL support lands */ - writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); } int clock_twi_onoff(int port, int state)