From: Adam Ford Date: Sat, 15 Oct 2016 11:23:11 +0000 (-0500) Subject: OMAP3: omap3_logic: Remove LCD preboot info X-Git-Tag: v2016.11-rc3~11 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=247dbda838a73275d311ab63bd7c5009f4f1f2dd;p=u-boot OMAP3: omap3_logic: Remove LCD preboot info The LCD isn't supported in U-Boot and the LCD is now configured in the device tree, so this code is pointless. V2: Eliminiate erroneous newline. Signed-off-by: Adam Ford Reviewed-by: Tom Rini --- diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index a7649cabd7..95ff5c3f4f 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -128,27 +128,7 @@ /* Environment information */ -/* - * PREBOOT assumes the 4.3" display is attached. User can interrupt - * and modify display variable to suit their needs. - */ #define CONFIG_PREBOOT \ - "echo ======================NOTICE============================;"\ - "echo \"The u-boot environment is not set.\";" \ - "echo \"If using a display a valid display variable for your panel\";" \ - "echo \"needs to be set.\";" \ - "echo \"Valid display options are:\";" \ - "echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";" \ - "echo \" 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharp w/ASIC\";" \ - "echo \" 5 == LQ064D343 TFT VGA (6.4) Sharp\";" \ - "echo \" 7 == LQ10D368 TFT VGA (10.4) Sharp\";" \ - "echo \" 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp (DEFAULT)\";" \ - "echo \" vga[-dvi or -hdmi] LCD VGA 640x480\";" \ - "echo \" svga[-dvi or -hdmi] LCD SVGA 800x600\";" \ - "echo \" xga[-dvi or -hdmi] LCD XGA 1024x768\";" \ - "echo \" 720p[-dvi or -hdmi] LCD 720P 1280x720\";" \ - "echo \"Defaulting to 4.3 LCD panel (display=15).\";" \ - "setenv display 15;" \ "setenv preboot;" \ "nand unlock;" \ "saveenv;"