From: wdenk <wdenk>
Date: Thu, 17 Jul 2003 23:16:40 +0000 (+0000)
Subject: * Patch by Martin Krause, 17 Jul 2003:
X-Git-Tag: LABEL_2006_03_12_0025~808
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2535d60277cc295adf75cd5721dcecd840c69a63;p=u-boot

* Patch by Martin Krause, 17 Jul 2003:
  add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS
---

diff --git a/CHANGELOG b/CHANGELOG
index 8c27c76b5d..66621ba90b 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,33 @@
+======================================================================
+Changes for U-Boot 0.4.5:
+======================================================================
+
+* Patch by Martin Krause, 17 Jul 2003:
+  add delay to get I2C working with "imm" command and s3c24x0_i2c.c
+
+* Patch by Richard Woodruff, 17 July 03:
+  - Fixed bug in OMAP1510 baud rate divisor settings. 
+
+* Patch by Nye Liu, 16 July 2003:
+  MPC860FADS fixes:
+  - add MPC86xADS support (uses MPC86xADS.h)
+  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
+    o PLPRCR changes
+    o BRG changes (EXTAL/XTAL restricted to 10MHz)
+    o don't trust gclk() software measurement by default, depend on
+      CONFIG_8xx_GCLK_FREQ
+  - add DRAM SIMM not installed detection
+  - use more "correct" SDRAM initialization sequence
+  - allow different SDRAM sizes (8xxADS has 8M)
+  - default DER is 0
+  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
+  - rename MAMR/MBMR defines to be more consistent. Should eventually
+    be merged into MxMR to better reflect the PowerQUICC datasheet.
+
+* Patch by Yuli Barcohen, 16 Jul 2003:
+  support new Motorola PQ2FADS-ZU evaluation board which replaced
+  MPC8260ADS and MPC8266ADS
+
 ======================================================================
 Changes for U-Boot 0.4.4:
 ======================================================================
diff --git a/MAKEALL b/MAKEALL
index 2f0a5d9f9e..a630cd2670 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -39,12 +39,12 @@ LIST_8xx="	\
 	IP860		IVML24		IVML24_128	IVML24_256	\
 	IVMS8		IVMS8_128	IVMS8_256	KUP4K           \
 	LANTEC	        lwmon   	MBX		MBX860T		\
-	MHPC		MVS1		NETVIA		NETVIA_V2	\
-	NX823		pcu_e		R360MPI		RBC823		\
-	rmu		RPXClassic	RPXlite		RRvision	\
-	SM850		SPD823TS	svm_sc8xx	SXNI855T	\
-	TOP860		TQM823L		TQM823L_LCD	TQM850L		\
-	TQM855L		TQM860L		v37				\
+	MHPC		MPC86xADS	MVS1		NETVIA		\
+	NETVIA_V2	NX823		pcu_e		R360MPI		\
+	RBC823		rmu		RPXClassic	RPXlite		\
+	RRvision	SM850		SPD823TS	svm_sc8xx	\
+	SXNI855T	TOP860		TQM823L		TQM823L_LCD	\
+	TQM850L		TQM855L		TQM860L		v37		\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 37eca7d9bf..e10e4185bc 100644
--- a/Makefile
+++ b/Makefile
@@ -227,6 +227,7 @@ ETX094_config	:	unconfig
 
 FADS823_config	\
 FADS850SAR_config \
+MPC86xADS_config \
 FADS860T_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx fads
 
diff --git a/README b/README
index 8b2b1af2fc..1c40711837 100644
--- a/README
+++ b/README
@@ -197,7 +197,7 @@ Directory Hierarchy:
 - board/lwmon	Files specific to LWMON	     boards
 - board/mbx8xx	Files specific to MBX	     boards
 - board/mpc8260ads
-		Files specific to MMPC8260ADS boards
+		Files specific to MPC8260ADS and PQ2FADS-ZU boards
 - board/mpl/	Files specific to boards manufactured by MPL
 - board/mpl/common	Common files for MPL boards
 - board/mpl/pip405	Files specific to PIP405     boards
@@ -383,6 +383,14 @@ The following options need to be configured:
 					  the lcd display every second with
 					  a "rotator" |\-/|\-/
 
+- Board flavour: (if CONFIG_MPC8260ADS is defined)
+		CONFIG_ADSTYPE
+		Possible values are:
+			CFG_8260ADS	- original MPC8260ADS
+			CFG_8266ADS	- MPC8266ADS (untested)
+			CFG_PQ2FADS	- PQ2FADS-ZU
+
+
 - MPC824X Family Member (if CONFIG_MPC824X is defined)
 	Define exactly one of
 	CONFIG_MPC8240, CONFIG_MPC8245
@@ -989,8 +997,8 @@ The following options need to be configured:
 		is FALSE, it clears it (low).
 
 		eg: #define I2C_SDA(bit) \
-		         if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
-		         else    immr->im_cpm.cp_pbdat &= ~PB_SDA
+			if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
+			else    immr->im_cpm.cp_pbdat &= ~PB_SDA
 
 		I2C_SCL(bit)
 
@@ -998,8 +1006,8 @@ The following options need to be configured:
 		is FALSE, it clears it (low).
 
 		eg: #define I2C_SCL(bit) \
-		         if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
-		         else    immr->im_cpm.cp_pbdat &= ~PB_SCL
+			if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
+			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 
 		I2C_DELAY
 
@@ -1687,9 +1695,10 @@ Low Level (hardware related) configuration options:
 
 - CFG_DEFAULT_IMMR:
 		Default address of the IMMR after system reset.
-		Needed on some 8260 systems (MPC8260ADS and RPXsuper)
-		to be able to adjust the position of the IMMR
-		register after a reset.
+
+                Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
+                and RPXsuper) to be able to adjust the position of
+                the IMMR register after a reset.
 
 - Floppy Disk Support:
 		CFG_FDC_DRIVE_NUMBER
@@ -1862,7 +1871,7 @@ configurations; the following names are supported:
     GENIETV_config	  TQM823L_config	PIP405_config
     GEN860T_config	  EBONY_config		FPS860L_config
     ELPT860_config	  cmi_mpc5xx_config	NETVIA_config
-    at91rm9200dk_config	  omap1510inn_config
+    at91rm9200dk_config	  omap1510inn_config	MPC8260ADS_config
 
 Note: for some board special configuration names may exist; check  if
       additional  information is available from the board vendor; for
diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c
index 83952d8388..f084ce3e5c 100644
--- a/board/eltec/mhpc/mhpc.c
+++ b/board/eltec/mhpc/mhpc.c
@@ -254,7 +254,7 @@ long int initdram (int board_type)
     upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
 
     memctl->memc_mamr  = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
-    memctl->memc_mbmr  = MAMR_GPL_B4DIS;
+    memctl->memc_mbmr  = MBMR_GPL_B4DIS;	/* should this be mamr? - NTL */
     memctl->memc_mptpr = MPTPR_PTP_DIV64;
     memctl->memc_mar   = 0x00008800;
 
diff --git a/board/fads/fads.c b/board/fads/fads.c
index 0519771966..3856b45cdf 100644
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
@@ -32,157 +32,155 @@
 
 #if defined(CONFIG_DRAM_50MHZ)
 /* 50MHz tables */
-const uint dram_60ns[] =
+static const uint dram_60ns[] =
 { 0x8fffec24, 0x0fffec04, 0x0cffec04, 0x00ffec04,
-  0x00ffec00, 0x37ffec47, 0xffffffff, 0xffffffff,
+  0x00ffec00, 0x37ffec47, _NOT_USED_, _NOT_USED_,
   0x8fffec24, 0x0fffec04, 0x08ffec04, 0x00ffec0c,
   0x03ffec00, 0x00ffec44, 0x00ffcc08, 0x0cffcc44,
   0x00ffec0c, 0x03ffec00, 0x00ffec44, 0x00ffcc00,
-  0x3fffc847, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x3fffc847, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x11bfcc47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x03afcc4c,
   0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
-  0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
-  0xffffcc85, 0xffffcc05, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+  0xffffcc85, 0xffffcc05, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
 
-const uint dram_70ns[] =
+static const uint dram_70ns[] =
 { 0x8fffcc24, 0x0fffcc04, 0x0cffcc04, 0x00ffcc04,
-  0x00ffcc00, 0x37ffcc47, 0xffffffff, 0xffffffff,
+  0x00ffcc00, 0x37ffcc47, _NOT_USED_, _NOT_USED_,
   0x8fffcc24, 0x0fffcc04, 0x0cffcc04, 0x00ffcc04,
   0x00ffcc08, 0x0cffcc44, 0x00ffec0c, 0x03ffec00,
   0x00ffec44, 0x00ffcc08, 0x0cffcc44, 0x00ffec04,
-  0x00ffec00, 0x3fffec47, 0xffffffff, 0xffffffff,
+  0x00ffec00, 0x3fffec47, _NOT_USED_, _NOT_USED_,
   0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x11bfcc47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x03afcc4c,
   0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
-  0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0xe0ffcc84, 0x00ffcc04, 0x00ffcc04, 0x0fffcc04,
-  0x7fffcc06, 0xffffcc85, 0xffffcc05, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+  0x7fffcc06, 0xffffcc85, 0xffffcc05, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
 
-const uint edo_60ns[] =
+static const uint edo_60ns[] =
 { 0x8ffbec24, 0x0ff3ec04, 0x0cf3ec04, 0x00f3ec04,
-  0x00f3ec00, 0x37f7ec47, 0xffffffff, 0xffffffff,
+  0x00f3ec00, 0x37f7ec47, _NOT_USED_, _NOT_USED_,
   0x8fffec24, 0x0ffbec04, 0x0cf3ec04, 0x00f3ec0c,
   0x0cf3ec00, 0x00f3ec4c, 0x0cf3ec00, 0x00f3ec4c,
   0x0cf3ec00, 0x00f3ec44, 0x03f3ec00, 0x3ff7ec47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
   0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
-  0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
-  0xffffcc85, 0xffffcc05, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+  0xffffcc85, 0xffffcc05, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
 
-const uint edo_70ns[] =
+static const uint edo_70ns[] =
 { 0x8ffbcc24, 0x0ff3cc04, 0x0cf3cc04, 0x00f3cc04,
-  0x00f3cc00, 0x37f7cc47, 0xffffffff, 0xffffffff,
+  0x00f3cc00, 0x37f7cc47, _NOT_USED_, _NOT_USED_,
   0x8fffcc24, 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc0c,
   0x03f3cc00, 0x00f3cc44, 0x00f3ec0c, 0x0cf3ec00,
   0x00f3ec4c, 0x03f3ec00, 0x00f3ec44, 0x00f3cc00,
-  0x33f7cc47, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x33f7cc47, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
   0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
-  0x0cafcc00, 0x33bfcc47, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0cafcc00, 0x33bfcc47, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0xe0ffcc84, 0x00ffcc04, 0x00ffcc04, 0x0fffcc04,
-  0x7fffcc04, 0xffffcc86, 0xffffcc05, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+  0x7fffcc04, 0xffffcc86, 0xffffcc05, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
 
 #elif defined(CONFIG_DRAM_25MHZ)
 
 /* 25MHz tables */
 
-const uint dram_60ns[] =
-{ 0x0fffcc04, 0x08ffcc00, 0x33ffcc47, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+static const uint dram_60ns[] =
+{ 0x0fffcc04, 0x08ffcc00, 0x33ffcc47, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0fffcc24, 0x0fffcc04, 0x08ffcc00, 0x03ffcc4c,
   0x08ffcc00, 0x03ffcc4c, 0x08ffcc00, 0x03ffcc4c,
-  0x08ffcc00, 0x33ffcc47, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x0fafcc04, 0x08afcc00, 0x3fbfcc47, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x08ffcc00, 0x33ffcc47, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x0fafcc04, 0x08afcc00, 0x3fbfcc47, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0fafcc04, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
   0x01afcc4c, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
-  0x31bfcc43, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x31bfcc43, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x80ffcc84, 0x13ffcc04, 0xffffcc87, 0xffffcc05,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
 
-const uint dram_70ns[] =
+static const uint dram_70ns[] =
 { 0x0fffec04, 0x08ffec04, 0x00ffec00, 0x3fffcc47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0fffcc24, 0x0fffcc04, 0x08ffcc00, 0x03ffcc4c,
   0x08ffcc00, 0x03ffcc4c, 0x08ffcc00, 0x03ffcc4c,
-  0x08ffcc00, 0x33ffcc47, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x0fafcc04, 0x08afcc00, 0x3fbfcc47, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x08ffcc00, 0x33ffcc47, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x0fafcc04, 0x08afcc00, 0x3fbfcc47, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0fafcc04, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
   0x01afcc4c, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
-  0x31bfcc43, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x31bfcc43, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0xc0ffcc84, 0x01ffcc04, 0x7fffcc86, 0xffffcc05,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
 
-const uint edo_60ns[] =
+static const uint edo_60ns[] =
 { 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc00, 0x33f7cc47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0ffbcc04, 0x09f3cc0c, 0x09f3cc0c, 0x09f3cc0c,
-  0x08f3cc00, 0x3ff7cc47, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x08f3cc00, 0x3ff7cc47, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0fefcc04, 0x08afcc04, 0x00afcc00, 0x3fbfcc47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0fefcc04, 0x08afcc00, 0x07afcc48, 0x08afcc48,
-  0x08afcc48, 0x39bfcc47, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x08afcc48, 0x39bfcc47, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x80ffcc84, 0x13ffcc04, 0xffffcc87, 0xffffcc05,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
 
-const uint edo_70ns[] =
+static const uint edo_70ns[] =
 { 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc00, 0x33f7cc47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0ffbec04, 0x08f3ec04, 0x03f3ec48, 0x08f3cc00,
   0x0ff3cc4c, 0x08f3cc00, 0x0ff3cc4c, 0x08f3cc00,
-  0x3ff7cc47, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x3ff7cc47, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0fefcc04, 0x08afcc04, 0x00afcc00, 0x3fbfcc47,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0x0fefcc04, 0x08afcc00, 0x07afcc4c, 0x08afcc00,
   0x07afcc4c, 0x08afcc00, 0x07afcc4c, 0x08afcc00,
-  0x37bfcc47, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x37bfcc47, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
   0xc0ffcc84, 0x01ffcc04, 0x7fffcc86, 0xffffcc05,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
-
-
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+  0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
 #else
-#error dram not correct defined - use CONFIG_DRAM_25MHZ or CONFIG_DRAM_50MHZ
+#error dram not correctly defined - use CONFIG_DRAM_25MHZ or CONFIG_DRAM_50MHZ
 #endif
 
 /* ------------------------------------------------------------------------- */
@@ -192,31 +190,11 @@ const uint edo_70ns[] =
  * Check Board Identity:
  */
 
-int checkboard (void)
+#if defined(CONFIG_FADS) && !defined(CONFIG_MPC86xADS)
+static void checkdboard(void)
 {
-	uint k;
-
-	puts ("Board: ");
-
-#ifdef CONFIG_FADS
-	k = (*((uint *)BCSR3) >> 24) & 0x3f;
-
-	switch(k) {
-	case 0x03 :
-	case 0x20 :
-	case 0x21 :
-	case 0x22 :
-	case 0x23 :
-	case 0x24 :
-	case 0x2a :
-	case 0x3f :
-		puts ("FADS");
-		break;
-
-	default :
-		printf("unknown board (0x%02x)\n", k);
-		return -1;
-	}
+	/* get db type from BCSR 3 */
+	uint k = (*((uint *)BCSR3) >> 24) & 0x3f;
 
 	printf(" with db ");
 
@@ -237,147 +215,202 @@ int checkboard (void)
 		puts ("MPC860SAR");
 		break;
 	case 0x24 :
+	case 0x2A :
 		puts ("MPC860T");
 		break;
-	case 0x3f :
+	case 0x3F :
 		puts ("MPC850SAR");
 		break;
+	default : printf("0x%x", k);
 	}
+}
+#endif	/* defined(CONFIG_FADS) && !defined(CONFIG_MPC86xADS) */
 
-	printf(" rev ");
+int checkboard (void)
+{
+	/* get revision from BCSR 3 */
+	uint r =  (((*((uint *) BCSR3) >> 23) & 1) << 3)
+		| (((*((uint *) BCSR3) >> 19) & 1) << 2)
+		| (((*((uint *) BCSR3) >> 16) & 3));
 
-	k = (((*((uint *)BCSR3) >> 23) & 1) << 3)
-	  | (((*((uint *)BCSR3) >> 19) & 1) << 2)
-	  | (((*((uint *)BCSR3) >> 16) & 3));
+	puts ("Board: ");
 
-	switch(k) {
-	case 0x01 :
-		puts ("ENG or PILOT\n");
+#ifdef CONFIG_FADS
+# ifdef CONFIG_MPC86xADS
+	puts ("MPC86xADS");
+# else
+	puts ("FADS");
+	checkdboard ();
+# endif	/* !CONFIG_MPC86xADS */
+	printf (" rev ");
+
+	switch (r) {
+	case 0x00:
+		puts ("ENG\n");
+		break;
+	case 0x01:
+		puts ("PILOT\n");
 		break;
-
 	default:
-		printf("unknown (0x%x)\n", k);
-		return -1;
+		printf ("unknown (0x%x)\n", r);
+		return (-1);
 	}
-
-	return 0;
 #endif	/* CONFIG_FADS */
 
 #ifdef CONFIG_ADS
-  printf("ADS rev ");
-
-  k = (((*((uint *)BCSR3) >> 23) & 1) << 3)
-    | (((*((uint *)BCSR3) >> 19) & 1) << 2)
-    | (((*((uint *)BCSR3) >> 16) & 3));
-
-  switch(k) {
-  case 0x00 : puts ("ENG - this board sucks, check the errata, not supported\n");
-	      return -1;
-  case 0x01 : puts ("PILOT - warning, read errata \n"); break;
-  case 0x02 : puts ("A - warning, read errata \n"); break;
-  case 0x03 : puts ("B \n"); break;
-  default   : printf ("unknown revision (0x%x)\n", k); return -1;
-  }
-
-  return 0;
+	printf ("ADS rev ");
+
+	switch (r) {
+	case 0x00:
+		puts ("ENG - this board sucks, check the errata, not supported\n");
+		return -1;
+	case 0x01:
+		puts ("PILOT - warning, read errata \n");
+		break;
+	case 0x02:
+		puts ("A - warning, read errata \n");
+		break;
+	case 0x03:
+		puts ("B \n");
+		break;
+	default:
+		printf ("unknown revision (0x%x)\n", r);
+		return (-1);
+	}
 #endif	/* CONFIG_ADS */
 
+	return 0;
 }
 
 /* ------------------------------------------------------------------------- */
-int _draminit(uint base, uint noMbytes, uint edo, uint delay)
+static long int dram_size (long int *base, long int maxsize)
 {
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr=base;
+	ulong cnt, val;
+	ulong save[32];				/* to make test non-destructive */
+	unsigned char i = 0;
 
-	/* init upm */
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
 
-	switch(delay)
-	{
-		case 70:
-		{
-			if(edo)
-			{
-				upmconfig(UPMA, (uint *) edo_70ns, sizeof(edo_70ns)/sizeof(uint));
-			}
-			else
-			{
-				upmconfig(UPMA, (uint *) dram_70ns, sizeof(dram_70ns)/sizeof(uint));
-			}
-
-			break;
-		}
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
 
-		case 60:
-		{
-			if(edo)
-			{
-				upmconfig(UPMA, (uint *) edo_60ns, sizeof(edo_60ns)/sizeof(uint));
-			}
-			else
-			{
-				upmconfig(UPMA, (uint *) dram_60ns, sizeof(dram_60ns)/sizeof(uint));
-			}
-
-			break;
-		}
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
 
-		default :
-			return -1;
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
 	}
 
-	memctl->memc_mptpr = 0x0400; /* divide by 16 */
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
 
-	switch(noMbytes)
-	{
+		val = *addr;
+		*addr = save[--i];
 
-		case 8:  /* 8 Mbyte uses both CS3 and CS2 */
-		{
-			memctl->memc_mamr = 0x13a01114;
-			memctl->memc_or3 = 0xffc00800;
-			memctl->memc_br3 = 0x00400081 + base;
-			memctl->memc_or2 = 0xffc00800;
-			break;
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
 		}
+	}
+	return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+static int _draminit (uint base, uint noMbytes, uint edo, uint delay)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	/* init upm */
 
-		case 4: /* 4 Mbyte uses only CS2 */
-		{
-			memctl->memc_mamr = 0x13a01114;
-			memctl->memc_or2 = 0xffc00800;
-			break;
+	switch (delay) {
+	case 70:
+		if (edo) {
+			upmconfig (UPMA, (uint *) edo_70ns,
+				   sizeof (edo_70ns) / sizeof (uint));
+		} else {
+			upmconfig (UPMA, (uint *) dram_70ns,
+				   sizeof (dram_70ns) / sizeof (uint));
 		}
 
-		case 32: /* 32 Mbyte uses both CS3 and CS2 */
-		{
-			memctl->memc_mamr = 0x13b01114;
-			memctl->memc_or3 = 0xff000800;
-			memctl->memc_br3 = 0x01000081 + base;
-			memctl->memc_or2 = 0xff000800;
-			break;
+		break;
+
+	case 60:
+		if (edo) {
+			upmconfig (UPMA, (uint *) edo_60ns,
+				   sizeof (edo_60ns) / sizeof (uint));
+		} else {
+			upmconfig (UPMA, (uint *) dram_60ns,
+				   sizeof (dram_60ns) / sizeof (uint));
 		}
 
-		case 16: /* 16 Mbyte uses only CS2 */
-		{
-#ifdef CONFIG_ADS
-			memctl->memc_mamr = 0x60b21114;
+		break;
+
+	default:
+		return -1;
+	}
+
+	memctl->memc_mptpr = 0x0400;	/* divide by 16 */
+
+	switch (noMbytes) {
+	case 4:				/* 4 Mbyte uses only CS2 */
+		memctl->memc_mamr = 0x13a01114;	/* PTA 0x13 AMA 010 */
+		memctl->memc_or2 = 0xffc00800;	/* 4M */
+		break;
+
+	case 8:				/* 8 Mbyte uses both CS3 and CS2 */
+		memctl->memc_mamr = 0x13a01114;	/* PTA 0x13 AMA 010 */
+		memctl->memc_or3 = 0xffc00800;	/* 4M */
+		memctl->memc_br3 = 0x00400081 + base;
+		memctl->memc_or2 = 0xffc00800;	/* 4M */
+		break;
+
+	case 16:			/* 16 Mbyte uses only CS2 */
+#ifdef CONFIG_ADS	/* XXX: why PTA=0x60 only in 16M case? - NTL */
+		memctl->memc_mamr = 0x60b21114;	/* PTA 0x60 AMA 011 */
 #else
-			memctl->memc_mamr = 0x13b01114;
+		memctl->memc_mamr = 0x13b01114;	/* PTA 0x13 AMA 011 */
 #endif
-			memctl->memc_or2 = 0xff000800;
-			break;
-		}
+		memctl->memc_or2 = 0xff000800;	/* 16M */
+		break;
+
+	case 32:			/* 32 Mbyte uses both CS3 and CS2 */
+		memctl->memc_mamr = 0x13b01114;	/* PTA 0x13 AMA 011 */
+		memctl->memc_or3 = 0xff000800;	/* 16M */
+		memctl->memc_br3 = 0x01000081 + base;
+		memctl->memc_or2 = 0xff000800;	/* 16M */
+		break;
+
+	default:
+		return -1;
+	}
+
+	memctl->memc_br2 = 0x81 + base;	/* use upma */
+
+	/* if no dimm is inserted, noMbytes is still detected as 8m, so
+	 * sanity check top and bottom of memory */
 
-		default:
-		    return -1;
+	*((uint *) BCSR1) &= ~BCSR1_DRAM_EN;	/* enable dram */
+
+	/* check bytes / 2 because dram_size tests at base+bytes, which
+	 * is not mapped */
+	if (dram_size ((long *) base, noMbytes << 19) != noMbytes << 19) {
+		*((uint *) BCSR1) |= BCSR1_DRAM_EN;	/* disable dram */
+		return -1;
 	}
 
-	memctl->memc_br2 = 0x81 + base;     /* use upma */
 	return 0;
 }
 
 /* ------------------------------------------------------------------------- */
 
-void _dramdisable(void)
+static void _dramdisable(void)
 {
 	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -388,6 +421,9 @@ void _dramdisable(void)
 	/* maybe we should turn off upma here or something */
 }
 
+#ifdef CONFIG_FADS
+/* SDRAM SUPPORT (FADS ONLY) */
+
 #if defined(CONFIG_SDRAM_100MHZ)
 
 /* ------------------------------------------------------------------------- */
@@ -398,49 +434,49 @@ void _dramdisable(void)
  * work at all processor speeds.
  */
 
-#define SDRAM_MPTPRVALUE 0x0400
-
-#define SDRAM_MBMRVALUE0 0xc3802114  /* (16-14) 50 MHz */
+#ifdef SDRAM_ALT_INIT_SEQENCE
+# define SDRAM_MBMRVALUE0 0xc3802114 /* PTx=195,PTxE,AMx=0,DSx=1,A11,RLFx=1,WLFx=1,TLFx=4 */
 #define SDRAM_MBMRVALUE1 SDRAM_MBMRVALUE0
+# define SDRAM_MCRVALUE0  0x80808111   /* run upmb cs4 loop 1 addr 0x11 MRS */
+# define SDRAM_MCRVALUE1  SDRAM_MCRVALUE0  /* ??? why not 0x80808130? */
+#else
+# define SDRAM_MxMR_PTx         195
+# define UPM_MRS_ADDR           0x11
+# define UPM_REFRESH_ADDR       0x30    /* or 0x11 if we want to be like above? */
+#endif /* !SDRAM_ALT_INIT_SEQUENCE */
 
-#define SDRAM_OR4VALUE   0xffc00a00
-#define SDRAM_BR4VALUE   0x000000c1   /* base address will be or:ed on */
-
-#define SDRAM_MARVALUE   0x88
-
-#define SDRAM_MCRVALUE0  0x80808111   /* run pattern 0x11 */
-#define SDRAM_MCRVALUE1  SDRAM_MCRVALUE0
-
-
-const uint sdram_table[] =
+static const uint sdram_table[] =
 {
 	/* single read. (offset 0 in upm RAM) */
 	0xefebfc24, 0x1f07fc24, 0xeeaefc04, 0x11adfc04,
-	0xefbbbc00, 0x1ff77c45, 0xffffffff, 0xffffffff,
+	0xefbbbc00, 0x1ff77c45, _NOT_USED_, _NOT_USED_,
 
 	/* burst read. (offset 8 in upm RAM) */
 	0xefebfc24, 0x1f07fc24, 0xeeaefc04, 0x10adfc04,
 	0xf0affc00, 0xf0affc00, 0xf1affc00, 0xefbbbc00,
-	0x1ff77c45, 0xeffbbc04, 0x1ff77c34, 0xefeabc34,
-	0x1fb57c35, 0xffffffff, 0xffffffff, 0xffffffff,
+	0x1ff77c45,
+
+	/* precharge + MRS. (offset 11 in upm RAM) */
+	0xeffbbc04, 0x1ff77c34, 0xefeabc34,
+	0x1fb57c35, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/* single write. (offset 18 in upm RAM) */
 	0xefebfc24, 0x1f07fc24, 0xeeaebc00, 0x01b93c04,
-	0x1ff77c45, 0xffffffff, 0xffffffff, 0xffffffff,
+	0x1ff77c45, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/* burst write. (offset 20 in upm RAM) */
 	0xefebfc24, 0x1f07fc24, 0xeeaebc00, 0x10ad7c00,
 	0xf0affc00, 0xf0affc00, 0xe1bbbc04, 0x1ff77c45,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/* refresh. (offset 30 in upm RAM) */
 	0xeffafc84, 0x1ff5fc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc84, 0xfffffc07, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xfffffc84, 0xfffffc07, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/* exception. (offset 3c in upm RAM) */
-	0xeffffc06, 0x1ffffc07, 0xffffffff, 0xffffffff };
+	0xeffffc06, 0x1ffffc07, _NOT_USED_, _NOT_USED_ };
 
 #elif defined(CONFIG_SDRAM_50MHZ)
 
@@ -449,71 +485,74 @@ const uint sdram_table[] =
 /* for chip MB811171622A-100                                                 */
 
 /* this table is for 32-50MHz operation */
-
-#define _not_used_ 0xffffffff
-
-#define SDRAM_MPTPRVALUE 0x0400
-
-#define SDRAM_MBMRVALUE0 0x80802114   /* refresh at 32MHz */
-#define SDRAM_MBMRVALUE1 0x80802118
-
-#define SDRAM_OR4VALUE   0xffc00a00
-#define SDRAM_BR4VALUE   0x000000c1   /* base address will be or:ed on */
-
+#ifdef SDRAM_ALT_INIT_SEQENCE
+# define SDRAM_MBMRVALUE0 0x80802114   /* PTx=128,PTxE,AMx=0,DSx=1,A11,RLFx=1,WLFx=1,TLFx=4 */
+# define SDRAM_MBMRVALUE1 0x80802118   /* PTx=128,PTxE,AMx=0,DSx=1,A11,RLFx=1,WLFx=1,TLFx=8 */
+# define SDRAM_MCRVALUE0  0x80808105   /* run upmb cs4 loop 1 addr 0x5 MRS */
+# define SDRAM_MCRVALUE1  0x80808130   /* run upmb cs4 loop 1 addr 0x30 REFRESH */
+# define SDRAM_MPTRVALUE  0x400
 #define SDRAM_MARVALUE   0x88
+#else
+# define SDRAM_MxMR_PTx         128
+# define UPM_MRS_ADDR           0x5
+# define UPM_REFRESH_ADDR       0x30
+#endif  /* !SDRAM_ALT_INIT_SEQUENCE */
 
-#define SDRAM_MCRVALUE0  0x80808105
-#define SDRAM_MCRVALUE1  0x80808130
-
-const uint sdram_table[] =
+static const uint sdram_table[] =
 {
 	/* single read. (offset 0 in upm RAM) */
 	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
 	0x1ff77c47,
 
-	/* MRS initialization (offset 5) */
-
+	/* precharge + MRS. (offset 5 in upm RAM) */
 	0x1ff77c34, 0xefeabc34, 0x1fb57c35,
 
 	/* burst read. (offset 8 in upm RAM) */
 	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
 	0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
-	_not_used_, _not_used_, _not_used_, _not_used_,
-	_not_used_, _not_used_, _not_used_, _not_used_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/* single write. (offset 18 in upm RAM) */
 	0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
-	_not_used_, _not_used_, _not_used_, _not_used_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/* burst write. (offset 20 in upm RAM) */
 	0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
-	0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
-	_not_used_, _not_used_, _not_used_, _not_used_,
-	_not_used_, _not_used_, _not_used_, _not_used_,
+	0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/* refresh. (offset 30 in upm RAM) */
 	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
-	_not_used_, _not_used_, _not_used_, _not_used_,
+	0xfffffc84, 0xfffffc07, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/* exception. (offset 3c in upm RAM) */
-	0x7ffffc07, _not_used_, _not_used_, _not_used_ };
+	0x7ffffc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
 
 /* ------------------------------------------------------------------------- */
 #else
 #error SDRAM not correctly configured
 #endif
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+#define SDRAM_OR4VALUE   0x00000a00 /* SAM,GL5A/S=01,addr mask or'ed on later */
+#define SDRAM_BR4VALUE   0x000000c1 /* UPMB,base addr or'ed on later */
+
+/* ------------------------------------------------------------------------- */
+#ifdef SDRAM_ALT_INIT_SEQENCE
+/* ------------------------------------------------------------------------- */
 
-int _initsdram(uint base, uint noMbytes)
+static int _initsdram(uint base, uint noMbytes)
 {
 	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
-	if(noMbytes != 4)
-	{
-		return -1;
-	}
-
 	upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint));
 
 	memctl->memc_mptpr = SDRAM_MPTPRVALUE;
@@ -529,7 +568,7 @@ int _initsdram(uint base, uint noMbytes)
 	* UPM registers after we ask it to run these commands.
 	*/
 
-	memctl->memc_mbmr = SDRAM_MBMRVALUE0;
+	memctl->memc_mbmr = SDRAM_MBMRVALUE0;   /* TLF 4 */
 	memctl->memc_mar = SDRAM_MARVALUE;  /* MRS code */
 
 	udelay(200);
@@ -537,32 +576,120 @@ int _initsdram(uint base, uint noMbytes)
 	/* Now run the precharge/nop/mrs commands.
 	*/
 
-	memctl->memc_mcr = 0x80808111;   /* run pattern 0x11 */
-
+	memctl->memc_mcr = 0x80808111;   /* run umpb cs4 1 count 1, addr 0x11 ??? (50Mhz) */
+	                                 /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100Mhz) */
 	udelay(200);
 
 	/* Run 8 refresh cycles */
 
-	memctl->memc_mcr = SDRAM_MCRVALUE0;
+	memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 Mhz)*/
+					    /* run upmb cs4 loop 1 addr 0x11 precharge+MRS (100MHz) */
 
 	udelay(200);
 
-	memctl->memc_mbmr = SDRAM_MBMRVALUE1;
-	memctl->memc_mcr = SDRAM_MCRVALUE1;
+	memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 Mhz) or TLF 8 (50MHz) */
+	memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 Mhz) */
+					    /* run upmb cs4 loop 1 addr 0x11 precharge+MRS ??? (100MHz) */
 
 	udelay(200);
 
-	memctl->memc_mbmr = SDRAM_MBMRVALUE0;
+	memctl->memc_mbmr = SDRAM_MBMRVALUE0;   /* TLF 4 */
 
-	memctl->memc_or4 = SDRAM_OR4VALUE;
+	memctl->memc_or4 = SDRAM_OR4VALUE | ~((noMbytes<<20)-1);
 	memctl->memc_br4 = SDRAM_BR4VALUE | base;
 
 	return 0;
 }
 
+/* ------------------------------------------------------------------------- */
+#else  /* !SDRAM_ALT_INIT_SEQUENCE */
+/* ------------------------------------------------------------------------- */
+
+/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit     */
+# define MPTPR_2BK_4K        MPTPR_PTP_DIV16         /* setting for 2 banks  */
+# define MPTPR_1BK_4K        MPTPR_PTP_DIV32         /* setting for 1 bank   */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
+# define MPTPR_2BK_8K        MPTPR_PTP_DIV8          /* setting for 2 banks  */
+# define MPTPR_1BK_8K        MPTPR_PTP_DIV16         /* setting for 1 bank   */
+
+/*
+ * MxMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+# define SDRAM_MxMR_8COL ((SDRAM_MxMR_PTx << MBMR_PTB_SHIFT)  | MBMR_PTBE  |   \
+			MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |   \
+			MBMR_RLFB_1X    | MBMR_WLFB_1X    | MBMR_TLFB_4X)
+/* 9 column SDRAM */
+# define SDRAM_MxMR_9COL ((SDRAM_MxMR_PTx << MBMR_PTB_SHIFT)  | MBMR_PTAE  |   \
+			MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |   \
+			MBMR_RLFB_1X    | MBMR_WLFB_1X    | MBMR_TLFB_4X)
+
+static int _initsdram(uint base, uint noMbytes)
+{
+	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint));
+
+	memctl->memc_mptpr = MPTPR_2BK_4K;
+	memctl->memc_mbmr  = SDRAM_MxMR_8COL & (~(MBMR_PTBE)); /* no refresh yet */
+
+	/* map CS 4 */
+	memctl->memc_or4 = SDRAM_OR4VALUE | ~((noMbytes<<20)-1);
+	memctl->memc_br4 = SDRAM_BR4VALUE | base;
+
+	/* Perform SDRAM initilization */
+# ifdef UPM_NOP_ADDR    /* not currently in UPM table */
+	/* step 1: nop */
+	memctl->memc_mar = 0x00000000;
+	memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+			   MCR_MLCF(0) | UPM_NOP_ADDR;
+# endif
+
+	/* step 2: delay */
+	udelay(200);
+
+# ifdef UPM_PRECHARGE_ADDR /* merged with MRS in UPM table */
+	/* step 3: precharge */
+	memctl->memc_mar = 0x00000000;
+	memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+			   MCR_MLCF(4) | UPM_PRECHARGE_ADDR;
+# endif
+
+	/* step 4: refresh */
+	memctl->memc_mar = 0x00000000;
+	memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+			   MCR_MLCF(2) | UPM_REFRESH_ADDR;
+
+	/*
+	 * note: for some reason, the UPM values we are using include
+	 * precharge with MRS
+	 */
+
+	/* step 5: mrs */
+	memctl->memc_mar = 0x00000088;
+	memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+			   MCR_MLCF(1) | UPM_MRS_ADDR;
+
+# ifdef UPM_NOP_ADDR
+	memctl->memc_mar = 0x00000000;
+	memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+			   MCR_MLCF(0) | UPM_NOP_ADDR;
+# endif
+	/*
+	 * Enable refresh
+	 */
+
+	memctl->memc_mbmr |= MBMR_PTBE;
+	return 0;
+}
+#endif  /* !SDRAM_ALT_INIT_SEQUENCE */
+
 /* ------------------------------------------------------------------------- */
 
-void _sdramdisable(void)
+static void _sdramdisable(void)
 {
 	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -574,17 +701,16 @@ void _sdramdisable(void)
 
 /* ------------------------------------------------------------------------- */
 
-int initsdram(uint base, uint *noMbytes)
+static int initsdram(uint base, uint *noMbytes)
 {
-	uint m = 4;
+	uint m = CFG_SDRAM_SIZE>>20;
 
+	/* _initsdram needs access to sdram */
 	*((uint *)BCSR1) |= BCSR1_SDRAM_EN; /* enable sdram */
-								  /* _fads_sdraminit needs access to sdram */
-	*noMbytes = m;
 
 	if(!_initsdram(base, m))
 	{
-
+	        *noMbytes += m;
 		return 0;
 	}
 	else
@@ -597,101 +723,85 @@ int initsdram(uint base, uint *noMbytes)
 	}
 }
 
+/* SDRAM SUPPORT (FADS ONLY) */
+#endif /* CONFIG_FADS */
+
 long int initdram (int board_type)
 {
-#ifdef CONFIG_ADS
-	/* ADS: has no SDRAM, so start DRAM at 0 */
-	uint base = (unsigned long)0x0;
-#else
-	/* FADS: has 4MB SDRAM, put DRAM above it */
-	uint base = (unsigned long)0x00400000;
-#endif
-	uint k, m, s;
+	uint sdramsz = 0;	/* size of sdram in Mbytes */
+	uint base = 0;		/* base of dram in bytes */
+	uint m = 0;		/* size of dram in Mbytes */
+	uint k, s;
 
-	k = (*((uint *)BCSR2) >> 23) & 0x0f;
+#ifdef CONFIG_FADS
+	if (!initsdram (0x00000000, &sdramsz)) {
+		base = sdramsz << 20;
+		printf ("(%u MB SDRAM) ", sdramsz);
+	}
+#endif
 
-	m = 0;
+	k = (*((uint *) BCSR2) >> 23) & 0x0f;
 
-	switch(k & 0x3)
-	{
+	switch (k & 0x3) {
 		/* "MCM36100 / MT8D132X" */
-		case 0x00 :
-			m = 4;
-			break;
+	case 0x00:
+		m = 4;
+		break;
 
 		/* "MCM36800 / MT16D832X" */
-		case 0x01 :
-			m = 32;
-			break;
+	case 0x01:
+		m = 32;
+		break;
 		/* "MCM36400 / MT8D432X" */
-		case 0x02 :
-			m = 16;
-			break;
+	case 0x02:
+		m = 16;
+		break;
 		/* "MCM36200 / MT16D832X ?" */
-		case 0x03 :
-			m = 8;
-			break;
+	case 0x03:
+		m = 8;
+		break;
 
 	}
 
-	switch(k >> 2)
-	{
-		case 0x02 :
-			k = 70;
-			break;
+	switch (k >> 2) {
+	case 0x02:
+		k = 70;
+		break;
 
-		case 0x03 :
-			k = 60;
-			break;
+	case 0x03:
+		k = 60;
+		break;
 
-		default :
-			printf("unknown dramdelay (0x%x) - defaulting to 70 ns", k);
-			k = 70;
+	default:
+		printf ("unknown dramdelay (0x%x) - defaulting to 70 ns", k);
+		k = 70;
 	}
 
 #ifdef CONFIG_FADS
 	/* the FADS is missing this bit, all rams treated as non-edo */
 	s = 0;
 #else
-	s = (*((uint *)BCSR2) >> 27) & 0x01;
+	s = (*((uint *) BCSR2) >> 27) & 0x01;
 #endif
 
-	if(!_draminit(base, m, s, k))
-	{
-#ifdef CONFIG_FADS
-		uint	sdramsz;
-#endif
-		*((uint *)BCSR1) &= ~BCSR1_DRAM_EN;  /* enable dram */
-
-#ifdef CONFIG_FADS
-		if (!initsdram(0x00000000, &sdramsz)) {
-				m += sdramsz;
-				printf("(%u MB SDRAM) ", sdramsz);
-		} else {
-				_dramdisable();
-
-				/********************************
-				*DRAM ERROR, HALT PROCESSOR
-				*********************************/
-				while(1);
-
-				return -1;
-		}
-#endif
-
-		return (m << 20);
+	if (!_draminit (base, m, s, k)) {
+		printf ("%dM %dns %sDRAM: ", m, k, s ? "EDO " : "");
+	} else {
+		_dramdisable ();
+		m = 0;
 	}
-	else
-	{
-		_dramdisable();
 
+	m += sdramsz;				/* add sdram size to total */
+
+	if (!m) {
 		/********************************
 		*DRAM ERROR, HALT PROCESSOR
 		*********************************/
-		while(1);
-
+		while (1);
 		return -1;
 	}
+
+	return (m << 20);
 }
 
 /* ------------------------------------------------------------------------- */
@@ -744,8 +854,7 @@ int pcmcia_init(void)
 	slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ;
 	slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ;
 
-	if (!(slota || slotb))
-	{
+	if (!(slota || slotb)) {
 		printf("No card present\n");
 #ifdef PCMCIA_SLOT_A
 		pcmp->pcmc_pgcra = 0;
@@ -766,61 +875,61 @@ int pcmcia_init(void)
 	**	   my FADS... :-)
 	*/
 
-#if defined(CONFIG_MPC860)
-	switch( (pcmp->pcmc_pipr >> 30) & 3 )
+#if defined(CONFIG_MPC86x)
+	switch ((pcmp->pcmc_pipr >> 30) & 3)
 #elif defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
-	switch( (pcmp->pcmc_pipr >> 14) & 3 )
+	switch ((pcmp->pcmc_pipr >> 14) & 3)
 #endif
 	{
-		case 0x00 :
-			printf("5V");
-			v = 5;
-			break;
-		case 0x01 :
-			printf("5V and 3V");
+	case 0x00 :
+		printf("5V");
+		v = 5;
+		break;
+	case 0x01 :
+		printf("5V and 3V");
 #ifdef CONFIG_FADS
-			v = 3; /* User lower voltage if supported! */
+		v = 3; /* User lower voltage if supported! */
 #else
-			v = 5;
+		v = 5;
 #endif
-			break;
-		case 0x03 :
-			printf("5V, 3V and x.xV");
+		break;
+	case 0x03 :
+		printf("5V, 3V and x.xV");
 #ifdef CONFIG_FADS
-			v = 3; /* User lower voltage if supported! */
+		v = 3; /* User lower voltage if supported! */
 #else
-			v = 5;
+		v = 5;
 #endif
-			break;
+		break;
 	}
 
-	switch(v){
+	switch (v) {
 #ifdef CONFIG_FADS
 	case 3:
-	    printf("; using 3V");
-	    /*
-	    ** Enable 3 volt Vcc.
-	    */
-	    *((uint *)BCSR1) &= ~BCSR1_PCCVCC1;
-	    *((uint *)BCSR1) |= BCSR1_PCCVCC0;
-	    break;
+		printf("; using 3V");
+		/*
+		** Enable 3 volt Vcc.
+		*/
+		*((uint *)BCSR1) &= ~BCSR1_PCCVCC1;
+		*((uint *)BCSR1) |= BCSR1_PCCVCC0;
+		break;
 #endif
 	case 5:
-	    printf("; using 5V");
+		printf("; using 5V");
 #ifdef CONFIG_ADS
-	    /*
-	    ** Enable 5 volt Vcc.
-	    */
-	    *((uint *)BCSR1) &= ~BCSR1_PCCVCCON;
+		/*
+		** Enable 5 volt Vcc.
+		*/
+		*((uint *)BCSR1) &= ~BCSR1_PCCVCCON;
 #endif
 #ifdef CONFIG_FADS
-	    /*
-	    ** Enable 5 volt Vcc.
-	    */
-	    *((uint *)BCSR1) &= ~BCSR1_PCCVCC0;
-	    *((uint *)BCSR1) |= BCSR1_PCCVCC1;
+		/*
+		** Enable 5 volt Vcc.
+		*/
+		*((uint *)BCSR1) &= ~BCSR1_PCCVCC0;
+		*((uint *)BCSR1) |= BCSR1_PCCVCC1;
 #endif
-	    break;
+		break;
 
 	default:
 		*((uint *)BCSR1) |= BCSR1_PCCEN;  /* disable pcmcia */
@@ -833,9 +942,9 @@ int pcmcia_init(void)
 
 	udelay(20);
 
-#ifdef MPC860
+#ifdef PCMCIA_SLOT_A
 	pcmp->pcmc_pgcra = 0;
-#elif MPC823
+#elif PCMCIA_SLOT_B
 	pcmp->pcmc_pgcrb = 0;
 #endif
 
diff --git a/board/flagadm/flagadm.c b/board/flagadm/flagadm.c
index bfd15251e8..9c553676ec 100644
--- a/board/flagadm/flagadm.c
+++ b/board/flagadm/flagadm.c
@@ -128,7 +128,7 @@ long int initdram (int board_type)
 
 	/* That should do it, just enable the periodic refresh in burst of 4*/
 	memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_4X;
-	memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_B4DIS);
+	memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_A4DIS);
 
 	size_b0 = 16*1024*1024;
 
@@ -141,7 +141,7 @@ long int initdram (int board_type)
 
 	upmconfig(UPMB, (uint *)dsp_disp_table, sizeof(dsp_disp_table)/sizeof(uint));
 
-	memctl->memc_mbmr = MAMR_GPL_B4DIS;
+	memctl->memc_mbmr = MBMR_GPL_B4DIS;
 
 	memctl->memc_or4 = CFG_OR4;
 	memctl->memc_br4 = CFG_BR4;
diff --git a/board/genietv/genietv.c b/board/genietv/genietv.c
index a5e64b34c7..3bfb25e9b8 100644
--- a/board/genietv/genietv.c
+++ b/board/genietv/genietv.c
@@ -163,7 +163,7 @@ long int initdram (int board_type)
     memctl->memc_mcr  = 0x80804105;	/* SDRAM bank 1 */
 
     /* Execute refresh 8 times */
-    memctl->memc_mbmr = (CFG_MBMR_8COL & ~MAMR_TLFB_MSK) | MAMR_TLFB_8X ;
+    memctl->memc_mbmr = (CFG_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X ;
 
     memctl->memc_mcr  = 0x80802130;	/* SDRAM bank 0 - execute twice */
 
diff --git a/board/gth/gth.c b/board/gth/gth.c
index 94e7a65433..6f972ce890 100644
--- a/board/gth/gth.c
+++ b/board/gth/gth.c
@@ -218,7 +218,7 @@ int _initsdram (uint base, uint * noMbytes)
 			   sizeof (fpga_table) / sizeof (uint));
 
 	/* Enable UPWAITB */
-	mc->memc_mbmr = MAMR_GPL_B4DIS;	/* (16-13) */
+	mc->memc_mbmr = MBMR_GPL_B4DIS;	/* (16-13) */
 
 	/* CS2, base FPGA_2_BASE - 4 MByte, use UPM B 32 Bit */
 	mc->memc_or2 = 0xffc00000 | OR_BI;
diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c
index 73a3987ad6..131ab0201d 100644
--- a/board/ivm/ivm.c
+++ b/board/ivm/ivm.c
@@ -246,14 +246,14 @@ initdram (int board_type)
     udelay(1);
     memctl->memc_mcr = 0x80806130;	/* autorefresh */
 
-    memctl->memc_mbmr |= MAMR_PTBE;	/* refresh enabled */
+    memctl->memc_mbmr |= MBMR_PTBE;	/* refresh enabled */
 
     /*
      * Check Bank 0 Memory Size for re-configuration
      */
     size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
 
-    memctl->memc_mbmr = CFG_MBMR_8COL | MAMR_PTBE;
+    memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
 
     return (size_b0);
 }
diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c
index 812f65acdf..655c95182b 100644
--- a/board/lantec/lantec.c
+++ b/board/lantec/lantec.c
@@ -149,7 +149,7 @@ long int initdram (int board_type)
 	udelay(1);		/* 0x80006106 */
 	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x06);
 
-	memctl->memc_mamr |= MAMR_PTBE;	/* refresh enabled */
+	memctl->memc_mamr |= MAMR_PTAE;	/* refresh enabled */
 
 	udelay(200);
 
@@ -170,7 +170,7 @@ long int initdram (int board_type)
 			     (ulong *)SDRAM_BASE3_PRELIM,
 			     SDRAM_MAX_SIZE);
 
-	memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
+	memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
 
 	/*
 	 * Final mapping:
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index b869bf3460..869cd58723 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -246,7 +246,7 @@ long int initdram (int board_type)
 	udelay (1);				/* 0x80006106 */
 	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);
 
-	memctl->memc_mamr |= MAMR_PTBE;	/* refresh enabled */
+	memctl->memc_mamr |= MAMR_PTAE;	/* refresh enabled */
 
 	udelay (200);
 
@@ -276,11 +276,11 @@ long int initdram (int board_type)
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
 		size_b0 = size9;
-		memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTBE;
+		memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTAE;
 		udelay (500);
 	} else {			/* back to 8 columns            */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
+		memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
 		udelay (500);
 	}
 
diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c
index 6d1764a2ac..6df3d80ba7 100644
--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -198,11 +198,19 @@ void reset_phy (void)
 	vu_long *bcsr = (vu_long *)CFG_BCSR;
 
 	/* reset the FEC port */
-	bcsr[1] &= ~FETH_RST;
+	bcsr[1] &= ~FETH1_RST;
 	udelay(2);
-	bcsr[1] |=  FETH_RST;
+	bcsr[1] |=  FETH1_RST;
 	udelay(1000);
 #ifdef CONFIG_MII
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+	/*
+	 * Do not bypass Rx/Tx (de)scrambler (fix configuration error)
+	 * Enable autonegotiation.
+	 */
+	miiphy_write(0, 16, 0x610);
+	miiphy_write(0, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+#else
 	/*
 	 * Ethernet PHY is configured (by means of configuration pins)
 	 * to work at 10Mb/s only. We reconfigure it using MII
@@ -212,6 +220,7 @@ void reset_phy (void)
 	miiphy_write(0, PHY_ANAR, 0x01E1); /* Advertise all capabilities */
 	miiphy_write(0, PHY_DCR,  0x0000); /* Do not bypass Rx/Tx (de)scrambler */
 	miiphy_write(0, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
 #endif /* CONFIG_MII */
 }
 
@@ -219,7 +228,7 @@ int board_pre_init (void)
 {
 	vu_long *bcsr = (vu_long *)CFG_BCSR;
 
-	bcsr[1] = ~FETHIEN & ~RS232EN_1;
+	bcsr[1] = ~FETHIEN1 & ~RS232EN_1;
 
 	return 0;
 }
@@ -231,12 +240,10 @@ long int initdram (int board_type)
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar *ramaddr, c = 0xff;
-
-	/* Initialisation is for 16MB DIMM the board is shipped with */
-	long int msize = 16;
-	uint or    = 0xFF000CA0;
-	uint psdmr = CFG_PSDMR;
-	uint psrt  = CFG_PSRT;
+	long int msize;
+	uint or;
+	uint psdmr;
+	uint psrt;
 
 	int i;
 
@@ -246,22 +253,29 @@ long int initdram (int board_type)
 	immap->im_siu_conf.sc_tescr1   = 0x00004000;
 
 	memctl->memc_mptpr = CFG_MPTPR;
-	/* init local sdram, bank 4 */
-	memctl->memc_lsrt  = 0x00000010;
+#ifdef CFG_LSDRAM_BASE
+	/* Init local bus SDRAM */
+	memctl->memc_lsrt  = CFG_LSRT;
+#if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */
+	memctl->memc_or3   = 0xFF803280;
+	memctl->memc_br3   = CFG_LSDRAM_BASE | 0x00001861;
+#else  				  /* CS4 */
 	memctl->memc_or4   = 0xFFC01480;
-	memctl->memc_br4   = 0x04001861;
-	memctl->memc_lsdmr = 0x2886A522;
+	memctl->memc_br4   = CFG_LSDRAM_BASE | 0x00001861;
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+	memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
 	ramaddr = (uchar *) CFG_LSDRAM_BASE;
 	*ramaddr = c;
-	memctl->memc_lsdmr = 0x0886A522;
+	memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
 	for (i = 0; i < 8; i++) {
 		*ramaddr = c;
 	}
-	memctl->memc_lsdmr = 0x1886A522;
+	memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
 	*ramaddr = c;
-	memctl->memc_lsdmr = 0x4086A522;
+	memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
+#endif /* CFG_LSDRAM_BASE */
 
-	/* init sdram dimm */
+	/* Init 60x bus SDRAM */
 #ifdef CONFIG_SPD_EEPROM
 	{
 		spd_eeprom_t spd;
@@ -398,6 +412,16 @@ long int initdram (int board_type)
 		printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt);
 #endif /* SPD_DEBUG */
 	}
+#else  /* !CONFIG_SPD_EEPROM */
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+	msize = 32;
+	or = 0xFE002EC0;
+#else
+	msize = 16;
+	or = 0xFF000CA0;
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+	psdmr = CFG_PSDMR;
+	psrt  = CFG_PSRT;
 #endif /* CONFIG_SPD_EEPROM */
 	memctl->memc_psrt = psrt;
 	memctl->memc_or2 = or;
@@ -415,12 +439,20 @@ long int initdram (int board_type)
 	*ramaddr = c;
 #endif
 
-	/* return total ram size of DIMM */
+	/* return total 60x bus SDRAM size */
 	return (msize * 1024 * 1024);
 }
 
 int checkboard (void)
 {
+#if   CONFIG_ADSTYPE == CFG_8260ADS
 	puts ("Board: Motorola MPC8260ADS\n");
+#elif CONFIG_ADSTYPE == CFG_8266ADS
+	puts ("Board: Motorola MPC8266ADS\n");
+#elif CONFIG_ADSTYPE == CFG_PQ2FADS
+	puts ("Board: Motorola PQ2FADS-ZU\n");
+#else
+	puts ("Board: unknown\n");
+#endif
 	return 0;
 }
diff --git a/board/mvs1/u-boot.lds b/board/mvs1/u-boot.lds
index 7fe24df33f..87bf341a9d 100644
--- a/board/mvs1/u-boot.lds
+++ b/board/mvs1/u-boot.lds
@@ -57,7 +57,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/mpc8xx/start.o		(.text)
-    cpu/mpc8xx/speed.o		(.text)
     common/dlmalloc.o		(.text)
     lib_ppc/ppcstring.o		(.text)
     lib_generic/vsprintf.o	(.text)
@@ -67,7 +66,6 @@ SECTIONS
     lib_generic/string.o	(.text)
     lib_ppc/extable.o		(.text)
     lib_ppc/kgdb.o		(.text)
-/*  lib_ppc/ticks.o		(.text) */
 
   . = env_offset;
     common/environment.o(.text)
diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c
index 2a4ce0c32b..b75e95a604 100644
--- a/board/r360mpi/r360mpi.c
+++ b/board/r360mpi/r360mpi.c
@@ -205,7 +205,7 @@ long int initdram (int board_type)
 	memctl->memc_br3 = CFG_BR3_CAN;
 
 	/* Initialize MBMR */
-	memctl->memc_mbmr = MAMR_GPL_B4DIS;	/* GPL_B4 works as UPWAITB */
+	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* GPL_B4 works as UPWAITB */
 
 	/* Initialize UPMB for CAN: single read */
 	memctl->memc_mdr = 0xFFFFC004;
diff --git a/board/siemens/CCM/ccm.c b/board/siemens/CCM/ccm.c
index 079f38f7ec..f2283b7601 100644
--- a/board/siemens/CCM/ccm.c
+++ b/board/siemens/CCM/ccm.c
@@ -267,7 +267,7 @@ void can_driver_enable (void)
     volatile memctl8xx_t *memctl = &immap->im_memctl;
 
     /* Initialize MBMR */
-    memctl->memc_mbmr = MAMR_GPL_B4DIS;	/* GPL_B4 ouput line Disable */
+    memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* GPL_B4 ouput line Disable */
 
     /* Initialize UPMB for CAN: single read */
     memctl->memc_mdr = 0xFFFFC004;
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index b2111890db..08dd975227 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -217,9 +217,9 @@ initdram (int board_type)
 #endif	/* XXX */
 
     reg  =  memctl->memc_mamr;
-    reg &= ~MAMR_TLFB_MSK;		/* switch timer loop ... */
-    reg |=  MAMR_TLFB_4X;		/* ... to 4x */
-    reg |=  MAMR_PTBE;			/* enable refresh */
+    reg &= ~MAMR_TLFA_MSK;		/* switch timer loop ... */
+    reg |=  MAMR_TLFA_4X;		/* ... to 4x */
+    reg |=  MAMR_PTAE;			/* enable refresh */
     memctl->memc_mamr = reg;
 
     udelay(200);
@@ -246,7 +246,7 @@ initdram (int board_type)
     size_b0 = dram_size (CFG_MAMR, (ulong *)SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 #endif	/* XXX */
 
-    memctl->memc_mamr = CFG_MAMR | MAMR_PTBE;
+    memctl->memc_mamr = CFG_MAMR | MAMR_PTAE;
 
     /*
      * Final mapping:
diff --git a/board/spd8xx/spd8xx.c b/board/spd8xx/spd8xx.c
index 61201d7ad0..239cf26398 100644
--- a/board/spd8xx/spd8xx.c
+++ b/board/spd8xx/spd8xx.c
@@ -200,14 +200,14 @@ initdram (int board_type)
     udelay(1);
     memctl->memc_mcr = 0x80806106;
 
-    memctl->memc_mbmr |= MAMR_PTBE;	/* refresh enabled */
+    memctl->memc_mbmr |= MBMR_PTBE;	/* refresh enabled */
 
     /*
      * Check Bank 0 Memory Size for re-configuration
      */
     size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
 
-    memctl->memc_mbmr = CFG_MBMR_8COL | MAMR_PTBE;
+    memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
 
     return (size_b0);
 }
diff --git a/board/v37/v37.c b/board/v37/v37.c
index 3b786ef8df..1ef879d5f1 100644
--- a/board/v37/v37.c
+++ b/board/v37/v37.c
@@ -140,7 +140,7 @@ long int initdram (int board_type)
     memctl->memc_br3 = CFG_BR3_CAN;
 
     /* Initialize MBMR */
-    memctl->memc_mamr = MAMR_GPL_B4DIS;	/* GPL_B4 ouput line Disable */
+    memctl->memc_mamr = MAMR_GPL_A4DIS;	/* GPL_A4 ouput line Disable */
 
     /* Initialize UPMB for CAN: single read */
     memctl->memc_mdr = 0xFFFFC004;
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 3856f3d101..6a9c77a67c 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -507,6 +507,9 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
 				if(i2c_write(chip, addr, alen, (char *)&data, size) != 0) {
 					printf("Error writing the chip.\n");
 				}
+#ifdef CFG_EEPROM_PAGE_WRITE_DELAY_MS
+				udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
 				if (incrflag)
 					addr += size;
 			}
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
index 4e232289c9..b95e06f345 100644
--- a/cpu/mpc8xx/cpu.c
+++ b/cpu/mpc8xx/cpu.c
@@ -42,12 +42,23 @@
 static char *cpu_warning = "\n         " \
 	"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
 
-#if ((defined(CONFIG_MPC860) || defined(CONFIG_MPC855)) && \
+#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
      !defined(CONFIG_MPC862))
-# ifdef CONFIG_MPC855
+
+# if defined(CONFIG_MPC855)
 #  define	ID_STR	"PC855"
+# elif defined(CONFIG_MPC852T)
+#  define	ID_STR	"PC852T"
+# elif defined(CONFIG_MPC859T)
+#  define	ID_STR	"PC859T"
+# elif defined(CONFIG_MPC859DSL)
+#  define	ID_STR	"PC859DSL"
+# elif defined(CONFIG_MPC860P)
+#  define	ID_STR	"PC860P"
+# elif defined(CONFIG_MPC866T)
+#  define	ID_STR	"PC866T"
 # else
-#  define	ID_STR	"PC860"
+#  define	ID_STR	"PC86x"	/* unknown 86x chip */
 # endif
 
 static int check_CPU (long clock, uint pvr, uint immr)
@@ -68,6 +79,10 @@ static int check_CPU (long clock, uint pvr, uint immr)
 	m = 0;
 
 	switch (k) {
+#ifdef CONFIG_MPC866_et_al
+                /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
+	case 0x08000003: pre = 'M'; suf = ""; m = 1; break;
+#else
 	case 0x00020001: pre = 'p'; suf = ""; break;
 	case 0x00030001: suf = ""; break;
 	case 0x00120003: suf = "A"; break;
@@ -76,17 +91,16 @@ static int check_CPU (long clock, uint pvr, uint immr)
 	case 0x00200004: suf = "B"; break;
 
 	case 0x00300004: suf = "C"; break;
-	case 0x00310004: suf = "C1"; m = 1;
-		break;
+	case 0x00310004: suf = "C1"; m = 1; break;
 
 	case 0x00200064: mid = "SR"; suf = "B"; break;
 	case 0x00300065: mid = "SR"; suf = "C"; break;
 	case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
 	case 0x05010000: suf = "D3"; m = 1; break;
 	case 0x05020000: suf = "D4"; m = 1; break;
-
 		/* this value is not documented anywhere */
 	case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
+#endif
 
 	default: suf = NULL; break;
 	}
@@ -101,7 +115,7 @@ static int check_CPU (long clock, uint pvr, uint immr)
 	printf (" %u kB I-Cache", checkicache () >> 10);
 	printf (" %u kB D-Cache", checkdcache () >> 10);
 
-	/* lets check and see if we're running on a 860T (or P?) */
+	/* do we have a FEC (860T/P or 852/859/866)? */
 
 	immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
 	if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
@@ -114,6 +128,12 @@ static int check_CPU (long clock, uint pvr, uint immr)
 
 	putc ('\n');
 
+#ifdef DEBUG
+        if(clock != measure_gclk()) {
+            printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
+        }
+#endif
+
 	return 0;
 }
 
@@ -316,7 +336,7 @@ int checkicache (void)
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	u32 cacheon = rd_ic_cst () & IDC_ENABLED;
 
-#ifdef CONFIG_IP860
+#ifdef CONFIG_IP86x
 	u32 k = memctl->memc_br1 & ~0x00007fff;	/* probe in flash memoryarea */
 #else
 	u32 k = memctl->memc_br0 & ~0x00007fff;	/* probe in flash memoryarea */
@@ -363,7 +383,7 @@ int checkdcache (void)
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	u32 cacheon = rd_dc_cst () & IDC_ENABLED;
 
-#ifdef CONFIG_IP860
+#ifdef CONFIG_IP86x
 	u32 k = memctl->memc_br1 & ~0x00007fff;	/* probe in flash memoryarea */
 #else
 	u32 k = memctl->memc_br0 & ~0x00007fff;	/* probe in flash memoryarea */
@@ -462,8 +482,20 @@ unsigned long get_tbclk (void)
 	if (immr->im_clkrst.car_sccr & SCCR_TBS) {
 		return (gd->cpu_clk / 16);
 	}
-
-	factor = (((CFG_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
+#define PLPRCR_val(a) (((CFG_PLPRCR) & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
+#ifdef CONFIG_MPC866_et_al
+        /*                   MFN
+                     MFI + -------
+                           MFD + 1
+          factor =  -----------------
+                     (PDF + 1) * 2^S
+         */
+
+	factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
+                 (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
+#else
+	factor = PLPRCR_val(MF)+1;
+#endif
 
 	oscclk = gd->cpu_clk / factor;
 
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index 83ff66a48a..80f763d1f0 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -145,6 +145,7 @@ void cpu_init_f (volatile immap_t * immr)
     defined(CONFIG_RPXCLASSIC)	|| \
     defined(CONFIG_RPXLITE)	|| \
     defined(CONFIG_SPD823TS)	|| \
+    defined(CONFIG_MPC86xADS)	|| \
    (defined(CONFIG_MPC860T) && defined(CONFIG_FADS))
 
 	memctl->memc_br0 = CFG_BR0_PRELIM;
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index 85ba6b201d..8ac7842928 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -217,7 +217,8 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 	volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
 
-#if defined(CONFIG_FADS) && defined(CONFIG_MPC860T)
+#if defined(CONFIG_FADS) && \
+	( defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al) )
 	/* configure FADS for fast (FEC) ethernet, half-duplex */
 	/* The LXT970 needs about 50ms to recover from reset, so
 	 * wait for it by discovering the PHY before leaving eth_init().
diff --git a/cpu/mpc8xx/interrupts.c b/cpu/mpc8xx/interrupts.c
index 866482600f..8bc0a1afde 100644
--- a/cpu/mpc8xx/interrupts.c
+++ b/cpu/mpc8xx/interrupts.c
@@ -334,7 +334,11 @@ void timer_interrupt (struct pt_regs *regs)
 	/* Reset Timer Expired and Timers Interrupt Status */
 	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
 	__asm__ ("nop");
+#ifdef CONFIG_MPC866_et_al
+	immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
+#else
 	immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
+#endif
 	/* Restore Decrementer Count */
 	set_dec (decrementer_count);
 
diff --git a/cpu/mpc8xx/scc.c b/cpu/mpc8xx/scc.c
index d711a63989..e0fae5d5b4 100644
--- a/cpu/mpc8xx/scc.c
+++ b/cpu/mpc8xx/scc.c
@@ -192,9 +192,9 @@ static int scc_init(struct eth_device* dev, bd_t *bis)
 
     volatile immap_t *immr = (immap_t *)CFG_IMMR;
 
-#if defined(CONFIG_FADS)
-#if defined(CONFIG_MPC860T)
-    /* The FADS860T doesn't use the MODEM_EN or DATA_VOICE signals.	*/
+#ifdef CONFIG_FADS
+#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC860T)
+    /* The MPC86xADS/FADS860T don't use the MODEM_EN or DATA_VOICE signals. */
     *((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
     *((uint *) BCSR4) |= BCSR4_TFPLDL|BCSR4_TPSQEL;
     *((uint *) BCSR1) &= ~BCSR1_ETHEN;
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index 81c0279a01..5ca4d90553 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -68,6 +68,23 @@
 #error "console not correctly defined"
 #endif
 
+static void serial_setdivisor(volatile cpm8xx_t *cp)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	int divisor=gd->cpu_clk/16/gd->baudrate;
+
+	if(divisor/16>0x1000) {
+		/* bad divisor, assume 50Mhz clock and 9600 baud */
+		divisor=(50*1000*1000)/16/9600;
+	}
+
+	if(divisor<=0x1000) {
+		cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
+	} else {
+		cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
+	}
+}
+
 #if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
 
 /*
@@ -229,8 +246,6 @@ int serial_init (void)
 void
 serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *im = (immap_t *)CFG_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 
@@ -242,8 +257,7 @@ serial_setbrg (void)
 
 	cp->cp_simode = 0x00000000;
 
-	cp->cp_brgc1 =
-		(((gd->cpu_clk / 16 / gd->baudrate)-1) << 1) | CPM_BRG_EN;
+	serial_setdivisor(cp);
 }
 
 #ifdef CONFIG_MODEM_SUPPORT
@@ -506,8 +520,6 @@ int serial_init (void)
 void
 serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *im = (immap_t *)CFG_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 
@@ -518,10 +530,8 @@ serial_setbrg (void)
 	 */
 
 	cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
-	/* no |= needed, since BRG1 is 000 */
 
-	cp->cp_brgc1 =
-		(((gd->cpu_clk / 16 / gd->baudrate)-1) << 1) | CPM_BRG_EN;
+	serial_setdivisor(cp);
 }
 
 void
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index e1c3400177..ae97d97553 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -32,7 +32,6 @@
 #define SPEED_PITC	 ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
 #define SPEED_PITC_INIT	 ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
 
-#if !defined(CONFIG_8xx_GCLK_FREQ)
 /* Access functions for the Machine State Register */
 static __inline__ unsigned long get_msr(void)
 {
@@ -46,7 +45,6 @@ static __inline__ void set_msr(unsigned long msr)
 {
 	asm volatile("mtmsr %0" : : "r" (msr));
 }
-#endif
 
 /* ------------------------------------------------------------------------- */
 
@@ -83,16 +81,20 @@ static __inline__ void set_msr(unsigned long msr)
  * CPU clock that is an even multiple of 0.1 MHz.
  */
 
-int get_clocks (void)
+unsigned long measure_gclk(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-#ifndef	CONFIG_8xx_GCLK_FREQ
 	volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
 	ulong timer2_val;
 	ulong msr_val;
 
+#ifdef CONFIG_MPC866_et_al
+        /* dont use OSCM, only use EXTCLK/512 */
+        immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
+#else
+        immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
+#endif
+
 	/* Reset + Stop Timer 2, no cascading
 	 */
 	timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
@@ -158,10 +160,27 @@ int get_clocks (void)
 	timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
 	immr->im_sit.sit_piscr &= ~PISCR_PTE;
 
-	gd->cpu_clk = ((timer2_val + 2) / 4) * 100000L;	/* convert to Hz    */
+#ifdef CONFIG_MPC866_et_al
+        /* not using OSCM, using XIN, so scale appropriately */
+	return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L;
+#else
+	return ((timer2_val + 2) / 4) * 100000L;	/* convert to Hz    */
+#endif
+}
+
+/*
+ * get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
+ * or (if it is not defined) measure_gclk() (which uses the ref clock)
+ * from above.
+ */
+int get_clocks (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
 
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+#ifndef	CONFIG_8xx_GCLK_FREQ
+	gd->cpu_clk = measure_gclk();
 #else /* CONFIG_8xx_GCLK_FREQ */
-
 	/*
 	 * If for some reason measuring the gclk frequency won't
 	 * work, we return the hardwired value.
diff --git a/drivers/serial.c b/drivers/serial.c
index f28ad803c1..44875e5ae1 100644
--- a/drivers/serial.c
+++ b/drivers/serial.c
@@ -51,6 +51,7 @@ static int calc_divisor (void)
 		console->osc_12m_sel = OSC_12M_SEL;	/* enable 6.5 * divisor */
 		return (1);				/* return 1 for base divisor */
 	}
+	console->osc_12m_sel = 0;			/* clear if previsouly set */
 #endif
 	return (CFG_NS16550_CLK / 16 / gd->baudrate);
 }
diff --git a/include/common.h b/include/common.h
index c8ad856a50..03db8d7a40 100644
--- a/include/common.h
+++ b/include/common.h
@@ -43,6 +43,20 @@ typedef volatile unsigned char	vu_char;
 #endif
 #ifdef	CONFIG_8xx
 #include <asm/8xx_immap.h>
+#ifdef CONFIG_MPC860
+#define CONFIG_MPC86x 1
+#endif
+#ifdef CONFIG_MPC860T
+#define CONFIG_MPC86x 1
+#endif
+#if defined(CONFIG_MPC866P) || \
+    defined(CONFIG_MPC866T) || \
+    defined(CONFIG_MPC859T) || \
+    defined(CONFIG_MPC859DSL) || \
+    defined(CONFIG_MPC852T)
+#define CONFIG_MPC866_et_al 1
+#define CONFIG_MPC86x 1
+#endif
 #elif defined(CONFIG_5xx)
 #include <asm/5xx_immap.h>
 #elif defined(CONFIG_8260)
diff --git a/include/commproc.h b/include/commproc.h
index 652d2ab913..6845248351 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -707,10 +707,10 @@ typedef struct scc_enet {
 
 /***  FADS860T********************************************************/
 
-#if defined(CONFIG_MPC860T) && defined(CONFIG_FADS)
-/* This ENET stuff is for the MPC860TFADS with ethernet on SCC1.
+#if (defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al)) \
+    && defined(CONFIG_FADS)
+/* This ENET stuff is for the MPC860TFADS/MPC8xxADS with ethernet on SCC1.
  */
-
 #ifdef CONFIG_SCC1_ENET
 #define	SCC_ENET	0
 #endif	/* CONFIG_SCC1_ETHERNET */
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index 1b7369236f..00453035a8 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -19,6 +19,7 @@
 #include <mpc8xx_irq.h>
 
 #define CONFIG_MPC860		1
+#define CONFIG_MPC860T		1
 #define CONFIG_ADS		1
 
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1	    */
@@ -31,10 +32,12 @@
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address defaults */
 #define CFG_I2C_SLAVE		0x7F
 
-#define MPC8XX_XIN		32768	/* 32.768 kHz input frequency	*/
-#define MPC8XX_FACT		0x5F6	/* Multiply by 1526 */
+#define CFG_8XX_XIN		32768	/* 32.768 kHz input frequency	*/
+#define CFG_8XX_FACT		0x5F6	/* Multiply by 1526 */
 					/* MPC8XX_FACT * MPC8XX_XIN = 50 MHz */
 
+#define CONFIG_8xx_GCLK_FREQ   ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
 
 #if 0
@@ -136,7 +139,7 @@
  * FLASH organization
  */
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	    */
-#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
+#define CFG_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
 
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)  */
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)  */
@@ -198,7 +201,7 @@
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR  (((MPC8XX_FACT-1) << 20) |	\
+#define CFG_PLPRCR  (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 		PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index acb2eed2a8..3b201a7910 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -23,6 +23,7 @@
 #define CFG_PCMCIA_MEM_ADDR	0xe0000000
 #define CFG_PCMCIA_MEM_SIZE	0x10000
 #define CFG_IMMR		0xFF000000
+#define	CFG_SDRAM_SIZE		(4<<20) /* standard FADS has 4M */
 #define	CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0x02800000
 #define BCSR_ADDR		((uint) 0xff010000)
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index a1041769ef..3d04ef0dd9 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -116,6 +116,7 @@
  * Also NOTE that it doesn't mean SDRAM - it means MEMORY.
  */
 #define	CFG_SDRAM_BASE		0x00000000
+#define	CFG_SDRAM_SIZE		(4<<20) /* standard FADS has 4M */
 #define CFG_FLASH_BASE		0x02800000
 #define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
 #if 0
diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h
index 2c9438988e..fd56010c1e 100644
--- a/include/configs/FADS860T.h
+++ b/include/configs/FADS860T.h
@@ -32,25 +32,33 @@
  */
 #include <mpc8xx_irq.h>
 
-#define CONFIG_MPC860		1
-#define CONFIG_MPC860T		1
-#define CONFIG_FADS		1
+/* board type */
+#define CONFIG_FADS		1       /* old/new FADS + new ADS */
+
+/* processor type */
+#define CONFIG_MPC860T		1       /* 860T */
 
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600
+#define CONFIG_BAUDRATE		38400
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 
-#if 0
-#define MPC8XX_FACT		10		/* Multiply by 10	*/
-#define MPC8XX_XIN		5000000			/* 5 MHz in	*/
-#else
-#define MPC8XX_FACT		12		/* Multiply by 12	*/
-#define MPC8XX_XIN		4000000			/* 4 MHz in	*/
-#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
+#if 0 /* old FADS */
+# define CFG_8XX_FACT		12		/* Multiply by 12 */
+# define CFG_8XX_XIN		4000000		/* 4 MHz in	*/
+#else /* new FADS */
+# define CFG_8XX_FACT		10		/* Multiply by 10 */
+# define CFG_8XX_XIN		5000000		/* 5 MHz in	*/
 #endif
 
+#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
+/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
+/* in general, we always know this for FADS+new ADS anyway */
+#define CONFIG_8xx_GCLK_FREQ     MPC8XX_HZ
+
+/* most vanilla kernels do not like this, set to 0 if in doubt */
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
 
 #if 1
@@ -59,8 +67,12 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 
-#define CONFIG_BOOTCOMMAND	"bootm 2800100"	/* autoboot command */
-#define CONFIG_BOOTARGS		""
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND			    \
+    "bootp; "				    \
+    "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "	    \
+    "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; "   \
+    "bootm"
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -77,10 +89,10 @@
 /* choose SCC1 ethernet (10BASET on motherboard)
  * or FEC ethernet (10/100 on daughterboard)
  */
-#if 1
+#if 0
 #define	CONFIG_SCC1_ENET	1	/* use SCC1 ethernet */
 #undef	CONFIG_FEC_ENET			/* disable FEC ethernet  */
-#else
+#else   /* all 86x cores have FECs, if in doubt, use it */
 #undef	CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
 #define CFG_DISCOVER_PHY
@@ -107,7 +119,11 @@
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
 #define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
+#if (CFG_SDRAM_SIZE)
+#define CFG_MEMTEST_END		CFG_SDRAM_SIZE	/* 1 ... SDRAM_SIZE	*/
+#else
 #define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
+#endif
 
 #define CFG_LOAD_ADDR	 	0x00100000
 
@@ -120,7 +136,7 @@
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
-/*-----------------------------------------------------------------------
+/*----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
 #define CFG_IMMR			0xFF000000
@@ -141,6 +157,11 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define	CFG_SDRAM_BASE		0x00000000
+#ifdef CONFIG_FADS
+# define	CFG_SDRAM_SIZE	0x00400000      /* 4 meg */
+#else   /* !CONFIG_FADS */ /* old ADS */
+# define	CFG_SDRAM_SIZE	0x00000000      /* NO SDRAM */
+#endif
 
 #define CFG_FLASH_BASE		0x02800000
 
@@ -218,7 +239,7 @@
  *-----------------------------------------------------------------------
  * set the PLL, the low-power modes and the reset control (15-29)
  */
-#define CFG_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+#define CFG_PLPRCR	(((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 /*-----------------------------------------------------------------------
@@ -235,7 +256,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER		0
+#define CFG_DER		 0
 
 /* Because of the way the 860 starts up and assigns CS0 the
 * entire address space, we have to set the memory controller
@@ -280,36 +301,6 @@
 #define CFG_OR1_PRELIM	0xffff8110		/* 64Kbyte address space */
 #define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V )
 
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CFG_MAMR_PTA		97	/* start with divider for 100 MHz	*/
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-#define CFG_MAMR		0x13a01114
 /*
  * Internal Definitions
  *
@@ -425,7 +416,7 @@
 #endif /* CONFIG_MPC850 */
 
 #define CONFIG_DRAM_50MHZ		1
-#define CONFIG_SDRAM_50MHZ
+#define CONFIG_SDRAM_50MHZ              1
 
 #ifdef CONFIG_MPC860T
 
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index 7b762266a8..6dedbd7770 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -354,7 +354,7 @@
  */
 
 #define CFG_MAMR	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLB_A11 |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
 			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_8X)
 
 
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index 77746e87f4..a0cb1dd484 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -424,7 +424,7 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTB	204
+#define CFG_MBMR_PTB	204
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
 #define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
@@ -448,19 +448,19 @@
 
 #if defined (CONFIG_IVML24_16M)
  /* 8 column SDRAM */
-# define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
- 			 MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 |	\
- 			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+ 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
+ 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVML24_32M)
 /* 128 MBit SDRAM */
-# define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVML24_64M)
 /* 128 MBit SDRAM */
-# define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #endif
 
 /*
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index 19063fa4dc..46b4d53546 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -408,7 +408,7 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTB	204
+#define CFG_MBMR_PTB	204
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
 #define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
@@ -431,19 +431,19 @@
 
 #if defined (CONFIG_IVMS8_16M)
  /* 8 column SDRAM */
-# define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
- 			 MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 |	\
- 			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+ 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
+ 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVMS8_32M)
 /* 128 MBit SDRAM */
-#define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 #elif defined (CONFIG_IVMS8_64M)
 /* 128 MBit SDRAM */
-#define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 
 #endif
 
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 401591db94..5960b30252 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -9,7 +9,8 @@
  *
  * (C) Copyright 2003 Arabella Software Ltd.
  * Yuli Barcohen <yuli@arabellasw.com>
- * Added support for SDRAM DIMMs SPD EEPROM, MII.
+ * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
+ * Ported to PQ2FADS-ZU board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -41,6 +42,15 @@
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
 #define CONFIG_MPC8260ADS	1	/* ...on motorola ads board */
 
+/* ADS flavours */
+#define CFG_8260ADS		1	/* MPC8260ADS */
+#define CFG_8266ADS		2	/* MPC8266ADS */
+#define CFG_PQ2FADS		3	/* PQ2FADS-ZU */
+
+#ifndef CONFIG_ADSTYPE
+#define CONFIG_ADSTYPE		CFG_8260ADS
+#endif /* CONFIG_ADSTYPE */
+
 #define CONFIG_BOARD_PRE_INIT	1	/* Call board_pre_init	*/
 
 /* allow serial and ethaddr to be overwritten */
@@ -116,7 +126,9 @@
 
 #endif /* CONFIG_ETHER_ON_FCC */
 
-/* other options */
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#undef CONFIG_SPD_EEPROM	/* On PQ2FADS-ZU, SDRAM is soldered  */
+#else
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
@@ -124,18 +136,23 @@
 #if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
 #define CONFIG_SPD_ADDR         0x50
 #endif
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
 
 #ifndef CONFIG_SDRAM_PBI
 #define CONFIG_SDRAM_PBI        1 /* By default, use page-based interleaving */
 #endif
 
 #ifndef CONFIG_8260_CLKIN
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CONFIG_8260_CLKIN	100000000	/* in Hz */
+#else
 #define CONFIG_8260_CLKIN	66666666	/* in Hz */
 #endif
+#endif
+
 #define CONFIG_BAUDRATE		115200
 
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-				 CFG_CMD_BEDBUG | \
+#define CFG_EXCLUDE		 CFG_CMD_BEDBUG | \
 				 CFG_CMD_BMP	| \
 				 CFG_CMD_BSP	| \
 				 CFG_CMD_DATE	| \
@@ -143,11 +160,11 @@
 				 CFG_CMD_DTT	| \
 				 CFG_CMD_EEPROM | \
 				 CFG_CMD_ELF    | \
+				 CFG_CMD_FAT    | \
 				 CFG_CMD_FDC	| \
 				 CFG_CMD_FDOS	| \
 				 CFG_CMD_HWFLOW	| \
 				 CFG_CMD_IDE	| \
-				 CFG_CMD_JFFS2	| \
 				 CFG_CMD_KGDB	| \
 				 CFG_CMD_MMC	| \
 				 CFG_CMD_NAND	| \
@@ -155,8 +172,18 @@
 				 CFG_CMD_PCMCIA | \
 				 CFG_CMD_SCSI	| \
 				 CFG_CMD_SPI	| \
-				 CFG_CMD_VFD	| \
-				 CFG_CMD_USB	) )
+				 CFG_CMD_USB	| \
+				 CFG_CMD_VFD
+
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
+				 CFG_CMD_SDRAM	| \
+				 CFG_CMD_I2C	| \
+				 CFG_EXCLUDE	) )
+#else
+#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
+				 CFG_EXCLUDE	) )
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -200,7 +227,6 @@
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CFG_FLASH_BASE		0xff800000
-#define FLASH_BASE		0xff800000
 #define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
 #define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */
 #define CFG_FLASH_SIZE		8
@@ -219,14 +245,16 @@
 #define CFG_DEFAULT_IMMR	0x0F010000
 
 #define CFG_IMMR		0xF0000000
-#define CFG_BCSR		0x04500000
+#define CFG_BCSR		0xF4500000
 #define CFG_SDRAM_BASE		0x00000000
-#define CFG_LSDRAM_BASE		0x04000000
+#define CFG_LSDRAM_BASE		0xD0000000
 
 #define RS232EN_1		0x02000002
 #define RS232EN_2		0x01000001
-#define FETHIEN			0x08000008
-#define FETH_RST		0x04000004
+#define FETHIEN1		0x08000008
+#define FETH1_RST		0x04000004
+#define FETHIEN2		0x01000000
+#define FETH2_RST		0x08000000
 
 #define CFG_INIT_RAM_ADDR	CFG_IMMR
 #define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
@@ -288,19 +316,30 @@
 #define CFG_SYPCR		0xFFFFFFC3
 #define CFG_BCR			0x100C0000
 #define CFG_SIUMCR		0x0A200000
-#define CFG_SCCR		0x00000000
-#define CFG_BR0_PRELIM		0xFF801801
-#define CFG_OR0_PRELIM		0xFF800836
-#define CFG_BR1_PRELIM		0x04501801
+#define CFG_SCCR		SCCR_DFBRG01
+#define CFG_BR0_PRELIM		CFG_FLASH_BASE | 0x00001801
+#define CFG_OR0_PRELIM		0xFF800876
+#define CFG_BR1_PRELIM		CFG_BCSR | 0x00001801
 #define CFG_OR1_PRELIM		0xFFFF8010
 
-#define CFG_RMR			0
+#define CFG_RMR			RMR_CSRE
 #define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 #define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
 #define CFG_RCCR		0
+
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CFG_PSDMR		0x824B36A3
+#define CFG_PSRT		0x13
+#define CFG_LSDMR		0x828737A3
+#define CFG_LSRT		0x13
+#define CFG_MPTPR		0x2800
+#else
 #define CFG_PSDMR		0x016EB452
-#define CFG_MPTPR		0x00001900
-#define CFG_PSRT		0x00000021
+#define CFG_PSRT		0x21
+#define CFG_LSDMR		0x0086A522
+#define CFG_LSRT		0x21
+#define CFG_MPTPR		0x1900
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
 
 #define CFG_RESET_ADDRESS	0x04400000
 
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
new file mode 100644
index 0000000000..fc79c52d79
--- /dev/null
+++ b/include/configs/MPC86xADS.h
@@ -0,0 +1,438 @@
+/*
+  * A collection of structures, addresses, and values associated with
+  * the Motorola MPC8xxADS board.  Copied from the FADS config.
+  *
+  * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+  */
+
+/*
+ * 1999-nov-26: The FADS is using the following physical memorymap:
+ *
+ * ff020000 -> ff02ffff : pcmcia
+ * ff010000 -> ff01ffff : BCSR       connected to CS1, setup by 8xxrom
+ * ff000000 -> ff00ffff : IMAP       internal in the cpu
+ * fe000000 -> ffnnnnnn : flash      connected to CS0, setup by 8xxrom
+ * 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#include <mpc8xx_irq.h>
+
+/* board type */
+#define CONFIG_MPC86xADS        1       /* new ADS */
+#define CONFIG_FADS		1       /* We are FADS compatible (more or less) */
+
+/* new 86xADS only - pick one of these */
+#define CONFIG_MPC866T 		1
+#undef CONFIG_MPC866P
+#undef CONFIG_MPC859T
+#undef CONFIG_MPC859DSL
+#undef CONFIG_MPC852T
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE		38400
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+
+#ifdef CONFIG_MPC86xADS
+# define CFG_8XX_FACT		5		/* Multiply by 5	*/
+# define CFG_8XX_XIN		10000000	/* 10 MHz in	*/
+#else /* ! CONFIG_MPC86xADS */
+# if 0 /* old FADS */
+#  define CFG_8XX_FACT		12		/* Multiply by 12 */
+#  define CFG_8XX_XIN		4000000		/* 4 MHz in	*/
+# else /* new FADS */
+#  define CFG_8XX_FACT		10		/* Multiply by 10 */
+#  define CFG_8XX_XIN		5000000		/* 5 MHz in	*/
+# endif
+#endif /* ! CONFIG_MPC86xADS */
+
+#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
+/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
+/* in general, we always know this for FADS+new ADS anyway */
+#define CONFIG_8xx_GCLK_FREQ     MPC8XX_HZ
+
+/* most vanilla kernels do not like this, set to 0 if in doubt */
+#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+
+#if 1
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND			    \
+    "bootp; "				    \
+    "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "	    \
+    "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; "   \
+    "bootm"
+
+/* #include "local.h" */
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/* ATA / IDE and partition support */
+#define CONFIG_MAC_PARTITION    1
+#define CONFIG_DOS_PARTITION    1
+#define CONFIG_ISO_PARTITION	1
+#undef	CONFIG_ATAPI
+#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+/* choose SCC1 ethernet (10BASET on motherboard)
+ * or FEC ethernet (10/100 on daughterboard)
+ */
+#if 0
+#define	CONFIG_SCC1_ENET	1	/* use SCC1 ethernet */
+#undef	CONFIG_FEC_ENET			/* disable FEC ethernet  */
+#else   /* all 86x cores have FECs, if in doubt, use it */
+#undef	CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
+#define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
+#define CFG_DISCOVER_PHY
+#endif
+#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
+#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#undef	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT		"=>"	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
+#if (CFG_SDRAM_SIZE)
+#define CFG_MEMTEST_END		CFG_SDRAM_SIZE	/* 1 ... SDRAM_SIZE	*/
+#else
+#define CFG_MEMTEST_END		0x0400000     	/* 1 ... 4 MB in DRAM	*/
+#endif
+
+#define CFG_LOAD_ADDR	 	0x00100000
+
+#define	CFG_HZ		        1000		/* decr freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFF000000
+#define CFG_IMMR_SIZE		((uint)(64 * 1024))
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#ifdef CONFIG_FADS
+# ifdef CONFIG_MPC86xADS /* new ADS */
+#  define	CFG_SDRAM_SIZE	0x00800000      /* 8 meg */
+# else                   /* old/new FADS */
+#  define	CFG_SDRAM_SIZE	0x00400000      /* 4 meg */
+# endif
+#else   /* !CONFIG_FADS */ /* old ADS */
+# define	CFG_SDRAM_SIZE	0x00000000      /* NO SDRAM */
+#endif
+
+#define CFG_FLASH_BASE		0x02800000
+
+#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
+
+#define	CFG_MONITOR_LEN		(272 << 10)	/* Reserve 272 kB for Monitor	*/
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define	CFG_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	16      /* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_OFFSET		0x00040000
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+#define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sector total size	*/
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control					11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration					11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control					11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
+ *-----------------------------------------------------------------------
+ * set the PLL, the low-power modes and the reset control (15-29)
+ */
+#define CFG_PLPRCR	((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) |	\
+				PLPRCR_SPLSS | PLPRCR_TEXPS)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF11
+#define CFG_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
+
+ /*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER		 0
+
+/* Because of the way the 860 starts up and assigns CS0 the
+* entire address space, we have to set the memory controller
+* differently.  Normally, you write the option register
+* first, and then enable the chip select by writing the
+* base register.  For CS0, you must write the base register
+* first, followed by the option register.
+*/
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+/* the other CS:s are determined by looking at parameters in BCSRx */
+
+#define BCSR_ADDR		((uint) 0xFF010000)
+#define BCSR_SIZE		((uint)(64 * 1024))
+
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+
+/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+
+#ifdef USE_REAL_FLASH_VALUES
+/*
+ * The "default" behaviour with 1Mbyte initial doesn't work for us!
+ */
+#define CFG_OR0_PRELIM	0x0FFC00D34 /* Real values for the board */
+#define CFG_BR0_PRELIM	0x02800001  /* Real values for the board */
+#else
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 8 Mbyte until detected */
+#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
+#endif
+
+/* BCSRx - Board Control and Status Registers */
+#define CFG_OR1_REMAP	CFG_OR0_REMAP
+#define CFG_OR1_PRELIM	0xffff8110		/* 64Kbyte address space */
+#define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V )
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/* values according to the manual */
+
+#define PCMCIA_MEM_ADDR		((uint)0xff020000)
+#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
+
+#define	BCSR0			((uint) (BCSR_ADDR + 00))
+#define	BCSR1			((uint) (BCSR_ADDR + 0x04))
+#define	BCSR2			((uint) (BCSR_ADDR + 0x08))
+#define	BCSR3			((uint) (BCSR_ADDR + 0x0c))
+#define	BCSR4			((uint) (BCSR_ADDR + 0x10))
+
+/* FADS bitvalues by Helmut Buchsbaum
+ * see MPC8xxADS User's Manual for a proper description
+ * of the following structures
+ */
+
+#define BCSR0_ERB       ((uint)0x80000000)
+#define BCSR0_IP        ((uint)0x40000000)
+#define BCSR0_BDIS      ((uint)0x10000000)
+#define BCSR0_BPS_MASK  ((uint)0x0C000000)
+#define BCSR0_ISB_MASK  ((uint)0x01800000)
+#define BCSR0_DBGC_MASK ((uint)0x00600000)
+#define BCSR0_DBPC_MASK ((uint)0x00180000)
+#define BCSR0_EBDF_MASK ((uint)0x00060000)
+
+#define BCSR1_FLASH_EN           ((uint)0x80000000)
+#define BCSR1_DRAM_EN            ((uint)0x40000000)
+#define BCSR1_ETHEN              ((uint)0x20000000)
+#define BCSR1_IRDEN              ((uint)0x10000000)
+#define BCSR1_FLASH_CFG_EN       ((uint)0x08000000)
+#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
+#define BCSR1_BCSR_EN            ((uint)0x02000000)
+#define BCSR1_RS232EN_1          ((uint)0x01000000)
+#define BCSR1_PCCEN              ((uint)0x00800000)
+#define BCSR1_PCCVCC0            ((uint)0x00400000)
+#define BCSR1_PCCVPP_MASK        ((uint)0x00300000)
+#define BCSR1_DRAM_HALF_WORD     ((uint)0x00080000)
+#define BCSR1_RS232EN_2          ((uint)0x00040000)
+#define BCSR1_SDRAM_EN           ((uint)0x00020000)
+#define BCSR1_PCCVCC1            ((uint)0x00010000)
+
+#define BCSR2_FLASH_PD_MASK      ((uint)0xF0000000)
+#define BCSR2_DRAM_PD_MASK       ((uint)0x07800000)
+#define BCSR2_DRAM_PD_SHIFT      (23)
+#define BCSR2_EXTTOLI_MASK       ((uint)0x00780000)
+#define BCSR2_DBREVNR_MASK       ((uint)0x00030000)
+
+#define BCSR3_DBID_MASK          ((ushort)0x3800)
+#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
+#define BCSR3_BREVNR0            ((ushort)0x0080)
+#define BCSR3_FLASH_PD_MASK      ((ushort)0x0070)
+#define BCSR3_BREVN1             ((ushort)0x0008)
+#define BCSR3_BREVN2_MASK        ((ushort)0x0003)
+
+#define BCSR4_ETHLOOP            ((uint)0x80000000)
+#define BCSR4_TFPLDL             ((uint)0x40000000)
+#define BCSR4_TPSQEL             ((uint)0x20000000)
+#define BCSR4_SIGNAL_LAMP        ((uint)0x10000000)
+#define BCSR4_FETH_EN            ((uint)0x08000000)
+#define BCSR4_FETHCFG0           ((uint)0x04000000)
+#define BCSR4_FETHFDE            ((uint)0x02000000)
+#define BCSR4_FETHCFG1           ((uint)0x00400000)
+#define BCSR4_FETHRST            ((uint)0x00200000)
+
+#define CONFIG_DRAM_50MHZ		1
+#define CONFIG_SDRAM_50MHZ              1
+
+/* Interrupt level assignments.
+*/
+#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
+
+/* We don't use the 8259.
+*/
+#define NR_8259_INTS	0
+
+/* Machine type
+*/
+#define _MACH_8xx (_MACH_fads)
+
+#define CONFIG_DISK_SPINUP_TIME 1000000
+
+
+/* PCMCIA configuration */
+
+#define PCMCIA_MAX_SLOTS    2
+
+#ifdef CONFIG_MPC860
+#define PCMCIA_SLOT_A 1
+#endif
+/*#define CFG_PCMCIA_MEM_SIZE     ( 64 << 20) */
+#define CFG_PCMCIA_MEM_ADDR	(0x50000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0x54000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0x58000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0x5C000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+/* we have 8 windows, we take everything up to 60000000 */
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0000
+/*#define CFG_ATA_ALT_OFFSET	0x0100 */
+
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 959ee1a491..9746b64b0b 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -331,8 +331,7 @@
  *
  */
 /* #define	CFG_DER	0x2002000F */
-/* #define CFG_DER	0 */
-#define	CFG_DER	0x0082000F
+#define CFG_DER	0
 
 /*
  * Init Memory Controller:
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index 51f2c253c2..ae4dcc2ccc 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -381,7 +381,7 @@
  */
 
 /* periodic timer for refresh */
-#define CFG_MAMR_PTB	204
+#define CFG_MBMR_PTB	204
 
 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
 #define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
@@ -396,9 +396,9 @@
  */
 
 /* 8 column SDRAM */
-#define CFG_MBMR_8COL	((CFG_MAMR_PTB << MAMR_PTB_SHIFT)  | \
-			 MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 |	\
-			 MAMR_RLFB_1X	 | MAMR_WLFB_1X	   | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL	((CFG_MBMR_PTB << MBMR_PTB_SHIFT)  | \
+			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
+			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 
 /*
  * Internal Definitions
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 42877a70f8..31f1e56b00 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -518,11 +518,11 @@
 #define CFG_MAMR_PTA	0x30	/* = 48 */
 
 #define CFG_MAMR	( (CFG_MAMR_PTA << MAMR_PTA_SHIFT) | \
-			  MAMR_AMB_TYPE_1	| \
-			  MAMR_G0CLB_A10	| \
-			  MAMR_RLFB_1X		| \
-			  MAMR_WLFB_1X		| \
-			  MAMR_TLFB_8X		)
+			  MAMR_AMA_TYPE_1	| \
+			  MAMR_G0CLA_A10	| \
+			  MAMR_RLFA_1X		| \
+			  MAMR_WLFA_1X		| \
+			  MAMR_TLFA_8X		)
 
 /*
  * Internal Definitions
diff --git a/include/configs/v37.h b/include/configs/v37.h
index 6696985bf5..45bc353ad2 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -296,8 +296,7 @@
  *-----------------------------------------------------------------------
  *
  */
-#define	CFG_DER	0x0082000F
-/*#define CFG_DER	0*/
+#define CFG_DER	0
 
 /*
  * Init Memory Controller:
diff --git a/include/mpc8xx.h b/include/mpc8xx.h
index 1a65f10ca2..e74d146fb9 100644
--- a/include/mpc8xx.h
+++ b/include/mpc8xx.h
@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -121,8 +121,8 @@
  * RSR - Reset Status Register						 5-4
  */
 #define RSR_JTRS	0x01000000	/* JTAG Reset Status		*/
-#define RSR_DBSRS	0x02000000	/* Debug Port Soft Reset Status	*/
-#define RSR_DBHRS	0x04000000	/* Debug Port Hard Reset Status	*/
+#define RSR_DBSRS	0x02000000	/* Debug Port Soft Reset Status */
+#define RSR_DBHRS	0x04000000	/* Debug Port Hard Reset Status */
 #define RSR_CSRS	0x08000000	/* Check Stop Reset Status	*/
 #define RSR_SWRS	0x10000000	/* Software Watchdog Reset Status*/
 #define RSR_LLRS	0x20000000	/* Loss-of-Lock Reset Status	*/
@@ -134,21 +134,42 @@
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register			15-30
  */
-#define PLPRCR_MF_MSK	0xFFF00000	/* Multiplication factor bits		*/
+#ifdef CONFIG_MPC866_et_al
+#define PLPRCR_MF_MSK	0xffff0000	/* Multiplication factor bits		*/
+#define PLPRCR_MFN_MSK	0xf8000000	/* Multiplication factor numerator bits */
+#define PLPRCR_MFN_SHIFT 0x0000001b	/* Multiplication factor numerator shift*/
+#define PLPRCR_MFD_MSK	0x03c00000	/* Multiplication factor denominator bits */
+#define PLPRCR_MFD_SHIFT 0x00000017	/* Multiplication factor denominator shift*/
+#define PLPRCR_S_MSK	0x00300000	/* Multiplication factor integer bits */
+#define PLPRCR_S_SHIFT	0x00000014	/* Multiplication factor integer shift*/
+#define PLPRCR_MFI_MSK	0x000f0000	/* Multiplication factor integer bits */
+#define PLPRCR_MFI_SHIFT 0x00000010	/* Multiplication factor integer shift*/
+#else
+#define PLPRCR_MF_MSK	0xfff00000	/* Multiplication factor bits		*/
 #define PLPRCR_MF_SHIFT 0x00000014	/* Multiplication factor shift value	*/
+#endif
 #define PLPRCR_SPLSS	0x00008000	/* SPLL Lock Status Sticky bit		*/
 #define PLPRCR_TEXPS	0x00004000	/* TEXP Status				*/
+#ifndef CONFIG_MPC866_et_al
 #define PLPRCR_TMIST	0x00001000	/* Timers Interrupt Status		*/
+#endif
 #define PLPRCR_CSRC	0x00000400	/* Clock Source				*/
+#ifndef CONFIG_MPC866_et_al
 #define PLPRCR_LPM_MSK	0x00000300	/* Low Power Mode mask			*/
 #define PLPRCR_LPM_NORMAL 0x00000000	/* normal power management mode		*/
 #define PLPRCR_LPM_DOZE	  0x00000100	/* doze power management mode		*/
 #define PLPRCR_LPM_SLEEP  0x00000200	/* sleep power management mode		*/
 #define PLPRCR_LPM_DEEP_SLEEP 0x00000300 /* deep sleep power mgt mode		*/
 #define PLPRCR_LPM_DOWN	  0x00000300	/* down power management mode		*/
+#endif
 #define PLPRCR_CSR	0x00000080	/* CheskStop Reset value		*/
 #define PLPRCR_LOLRE	0x00000040	/* Loss Of Lock Reset Enable		*/
 #define PLPRCR_FIOPD	0x00000020	/* Force I/O Pull Down			*/
+#ifdef CONFIG_MPC866_et_al
+#define PLPRCR_PDF_MSK	0x0000001e	/* Predivision Factor bits		*/
+#define PLPRCR_PDF_SHIFT 0x00000001	/* Predivision Factor shift value	*/
+#define PLPRCR_DBRMO	0x00000001	/* DPLL BRM Order bit			*/
+#endif
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register			15-27
@@ -261,8 +282,8 @@
  * MCR - Memory Command Register
  */
 #define MCR_OP_WRITE	0x00000000	/* WRITE command			*/
-#define MCR_OP_READ	0x40000000	/* READ  command			*/
-#define MCR_OP_RUN	0x80000000	/* RUN   command			*/
+#define MCR_OP_READ	0x40000000	/* READ	 command			*/
+#define MCR_OP_RUN	0x80000000	/* RUN	 command			*/
 #define MCR_UPM_A	0x00000000	/* Select UPM A				*/
 #define MCR_UPM_B	0x00800000	/* Select UPM B				*/
 #define MCR_MB_CS0	0x00000000	/* Use Chip Select /CS0			*/
@@ -359,138 +380,138 @@
 /*-----------------------------------------------------------------------
  * Machine B Mode Register						16-13
  */
-#define MAMR_PTB_MSK	0xFF000000	/* Periodic Timer B period mask		*/
-#define MAMR_PTB_SHIFT	0x00000018	/* Periodic Timer B period shift	*/
-#define MAMR_PTBE	0x00800000	/* Periodic Timer B Enable		*/
-#define MAMR_AMB_MSK	0x00700000	/* Addess Multiplex size B		*/
-#define MAMR_AMB_TYPE_0 0x00000000	/* Addess Multiplexing Type 0		*/
-#define MAMR_AMB_TYPE_1 0x00100000	/* Addess Multiplexing Type 1		*/
-#define MAMR_AMB_TYPE_2 0x00200000	/* Addess Multiplexing Type 2		*/
-#define MAMR_AMB_TYPE_3 0x00300000	/* Addess Multiplexing Type 3		*/
-#define MAMR_AMB_TYPE_4 0x00400000	/* Addess Multiplexing Type 4		*/
-#define MAMR_AMB_TYPE_5 0x00500000	/* Addess Multiplexing Type 5		*/
-#define MAMR_DSB_MSK	0x00060000	/* Disable Timer period mask		*/
-#define MAMR_DSB_1_CYCL 0x00000000	/* 1 cycle Disable Period		*/
-#define MAMR_DSB_2_CYCL 0x00020000	/* 2 cycle Disable Period		*/
-#define MAMR_DSB_3_CYCL 0x00040000	/* 3 cycle Disable Period		*/
-#define MAMR_DSB_4_CYCL 0x00060000	/* 4 cycle Disable Period		*/
-#define MAMR_G0CLB_MSK	0x0000E000	/* General Line 0 Control B		*/
-#define MAMR_G0CLB_A12	0x00000000	/* General Line 0 : A12			*/
-#define MAMR_G0CLB_A11	0x00002000	/* General Line 0 : A11			*/
-#define MAMR_G0CLB_A10	0x00004000	/* General Line 0 : A10			*/
-#define MAMR_G0CLB_A9	0x00006000	/* General Line 0 : A9			*/
-#define MAMR_G0CLB_A8	0x00008000	/* General Line 0 : A8			*/
-#define MAMR_G0CLB_A7	0x0000A000	/* General Line 0 : A7			*/
-#define MAMR_G0CLB_A6	0x0000C000	/* General Line 0 : A6			*/
-#define MAMR_G0CLB_A5	0x0000E000	/* General Line 0 : A5			*/
-#define MAMR_GPL_B4DIS	0x00001000	/* GPL_B4 ouput line Disable		*/
-#define MAMR_RLFB_MSK	0x00000F00	/* Read Loop Field B mask		*/
-#define MAMR_RLFB_1X	0x00000100	/* The Read Loop is executed 1 time	*/
-#define MAMR_RLFB_2X	0x00000200	/* The Read Loop is executed 2 times	*/
-#define MAMR_RLFB_3X	0x00000300	/* The Read Loop is executed 3 times	*/
-#define MAMR_RLFB_4X	0x00000400	/* The Read Loop is executed 4 times	*/
-#define MAMR_RLFB_5X	0x00000500	/* The Read Loop is executed 5 times	*/
-#define MAMR_RLFB_6X	0x00000600	/* The Read Loop is executed 6 times	*/
-#define MAMR_RLFB_7X	0x00000700	/* The Read Loop is executed 7 times	*/
-#define MAMR_RLFB_8X	0x00000800	/* The Read Loop is executed 8 times	*/
-#define MAMR_RLFB_9X	0x00000900	/* The Read Loop is executed 9 times	*/
-#define MAMR_RLFB_10X	0x00000A00	/* The Read Loop is executed 10 times	*/
-#define MAMR_RLFB_11X	0x00000B00	/* The Read Loop is executed 11 times	*/
-#define MAMR_RLFB_12X	0x00000C00	/* The Read Loop is executed 12 times	*/
-#define MAMR_RLFB_13X	0x00000D00	/* The Read Loop is executed 13 times	*/
-#define MAMR_RLFB_14X	0x00000E00	/* The Read Loop is executed 14 times	*/
-#define MAMR_RLFB_15X	0x00000f00	/* The Read Loop is executed 15 times	*/
-#define MAMR_RLFB_16X	0x00000000	/* The Read Loop is executed 16 times	*/
-#define MAMR_WLFB_MSK	0x000000F0	/* Write Loop Field B mask		*/
-#define MAMR_WLFB_1X	0x00000010	/* The Write Loop is executed 1 time	*/
-#define MAMR_WLFB_2X	0x00000020	/* The Write Loop is executed 2 times	*/
-#define MAMR_WLFB_3X	0x00000030	/* The Write Loop is executed 3 times	*/
-#define MAMR_WLFB_4X	0x00000040	/* The Write Loop is executed 4 times	*/
-#define MAMR_WLFB_5X	0x00000050	/* The Write Loop is executed 5 times	*/
-#define MAMR_WLFB_6X	0x00000060	/* The Write Loop is executed 6 times	*/
-#define MAMR_WLFB_7X	0x00000070	/* The Write Loop is executed 7 times	*/
-#define MAMR_WLFB_8X	0x00000080	/* The Write Loop is executed 8 times	*/
-#define MAMR_WLFB_9X	0x00000090	/* The Write Loop is executed 9 times	*/
-#define MAMR_WLFB_10X	0x000000A0	/* The Write Loop is executed 10 times	*/
-#define MAMR_WLFB_11X	0x000000B0	/* The Write Loop is executed 11 times	*/
-#define MAMR_WLFB_12X	0x000000C0	/* The Write Loop is executed 12 times	*/
-#define MAMR_WLFB_13X	0x000000D0	/* The Write Loop is executed 13 times	*/
-#define MAMR_WLFB_14X	0x000000E0	/* The Write Loop is executed 14 times	*/
-#define MAMR_WLFB_15X	0x000000F0	/* The Write Loop is executed 15 times	*/
-#define MAMR_WLFB_16X	0x00000000	/* The Write Loop is executed 16 times	*/
-#define MAMR_TLFB_MSK	0x0000000F	/* Timer Loop Field B mask		*/
-#define MAMR_TLFB_1X	0x00000001	/* The Timer Loop is executed 1 time	*/
-#define MAMR_TLFB_2X	0x00000002	/* The Timer Loop is executed 2 times	*/
-#define MAMR_TLFB_3X	0x00000003	/* The Timer Loop is executed 3 times	*/
-#define MAMR_TLFB_4X	0x00000004	/* The Timer Loop is executed 4 times	*/
-#define MAMR_TLFB_5X	0x00000005	/* The Timer Loop is executed 5 times	*/
-#define MAMR_TLFB_6X	0x00000006	/* The Timer Loop is executed 6 times	*/
-#define MAMR_TLFB_7X	0x00000007	/* The Timer Loop is executed 7 times	*/
-#define MAMR_TLFB_8X	0x00000008	/* The Timer Loop is executed 8 times	*/
-#define MAMR_TLFB_9X	0x00000009	/* The Timer Loop is executed 9 times	*/
-#define MAMR_TLFB_10X	0x0000000A	/* The Timer Loop is executed 10 times	*/
-#define MAMR_TLFB_11X	0x0000000B	/* The Timer Loop is executed 11 times	*/
-#define MAMR_TLFB_12X	0x0000000C	/* The Timer Loop is executed 12 times	*/
-#define MAMR_TLFB_13X	0x0000000D	/* The Timer Loop is executed 13 times	*/
-#define MAMR_TLFB_14X	0x0000000E	/* The Timer Loop is executed 14 times	*/
-#define MAMR_TLFB_15X	0x0000000F	/* The Timer Loop is executed 15 times	*/
-#define MAMR_TLFB_16X	0x00000000	/* The Timer Loop is executed 16 times	*/
+#define MBMR_PTB_MSK	0xFF000000	/* Periodic Timer B period mask		*/
+#define MBMR_PTB_SHIFT	0x00000018	/* Periodic Timer B period shift	*/
+#define MBMR_PTBE	0x00800000	/* Periodic Timer B Enable		*/
+#define MBMR_AMB_MSK	0x00700000	/* Addess Multiplex size B		*/
+#define MBMR_AMB_TYPE_0 0x00000000	/* Addess Multiplexing Type 0		*/
+#define MBMR_AMB_TYPE_1 0x00100000	/* Addess Multiplexing Type 1		*/
+#define MBMR_AMB_TYPE_2 0x00200000	/* Addess Multiplexing Type 2		*/
+#define MBMR_AMB_TYPE_3 0x00300000	/* Addess Multiplexing Type 3		*/
+#define MBMR_AMB_TYPE_4 0x00400000	/* Addess Multiplexing Type 4		*/
+#define MBMR_AMB_TYPE_5 0x00500000	/* Addess Multiplexing Type 5		*/
+#define MBMR_DSB_MSK	0x00060000	/* Disable Timer period mask		*/
+#define MBMR_DSB_1_CYCL 0x00000000	/* 1 cycle Disable Period		*/
+#define MBMR_DSB_2_CYCL 0x00020000	/* 2 cycle Disable Period		*/
+#define MBMR_DSB_3_CYCL 0x00040000	/* 3 cycle Disable Period		*/
+#define MBMR_DSB_4_CYCL 0x00060000	/* 4 cycle Disable Period		*/
+#define MBMR_G0CLB_MSK	0x0000E000	/* General Line 0 Control B		*/
+#define MBMR_G0CLB_A12	0x00000000	/* General Line 0 : A12			*/
+#define MBMR_G0CLB_A11	0x00002000	/* General Line 0 : A11			*/
+#define MBMR_G0CLB_A10	0x00004000	/* General Line 0 : A10			*/
+#define MBMR_G0CLB_A9	0x00006000	/* General Line 0 : A9			*/
+#define MBMR_G0CLB_A8	0x00008000	/* General Line 0 : A8			*/
+#define MBMR_G0CLB_A7	0x0000A000	/* General Line 0 : A7			*/
+#define MBMR_G0CLB_A6	0x0000C000	/* General Line 0 : A6			*/
+#define MBMR_G0CLB_A5	0x0000E000	/* General Line 0 : A5			*/
+#define MBMR_GPL_B4DIS	0x00001000	/* GPL_B4 ouput line Disable		*/
+#define MBMR_RLFB_MSK	0x00000F00	/* Read Loop Field B mask		*/
+#define MBMR_RLFB_1X	0x00000100	/* The Read Loop is executed 1 time	*/
+#define MBMR_RLFB_2X	0x00000200	/* The Read Loop is executed 2 times	*/
+#define MBMR_RLFB_3X	0x00000300	/* The Read Loop is executed 3 times	*/
+#define MBMR_RLFB_4X	0x00000400	/* The Read Loop is executed 4 times	*/
+#define MBMR_RLFB_5X	0x00000500	/* The Read Loop is executed 5 times	*/
+#define MBMR_RLFB_6X	0x00000600	/* The Read Loop is executed 6 times	*/
+#define MBMR_RLFB_7X	0x00000700	/* The Read Loop is executed 7 times	*/
+#define MBMR_RLFB_8X	0x00000800	/* The Read Loop is executed 8 times	*/
+#define MBMR_RLFB_9X	0x00000900	/* The Read Loop is executed 9 times	*/
+#define MBMR_RLFB_10X	0x00000A00	/* The Read Loop is executed 10 times	*/
+#define MBMR_RLFB_11X	0x00000B00	/* The Read Loop is executed 11 times	*/
+#define MBMR_RLFB_12X	0x00000C00	/* The Read Loop is executed 12 times	*/
+#define MBMR_RLFB_13X	0x00000D00	/* The Read Loop is executed 13 times	*/
+#define MBMR_RLFB_14X	0x00000E00	/* The Read Loop is executed 14 times	*/
+#define MBMR_RLFB_15X	0x00000f00	/* The Read Loop is executed 15 times	*/
+#define MBMR_RLFB_16X	0x00000000	/* The Read Loop is executed 16 times	*/
+#define MBMR_WLFB_MSK	0x000000F0	/* Write Loop Field B mask		*/
+#define MBMR_WLFB_1X	0x00000010	/* The Write Loop is executed 1 time	*/
+#define MBMR_WLFB_2X	0x00000020	/* The Write Loop is executed 2 times	*/
+#define MBMR_WLFB_3X	0x00000030	/* The Write Loop is executed 3 times	*/
+#define MBMR_WLFB_4X	0x00000040	/* The Write Loop is executed 4 times	*/
+#define MBMR_WLFB_5X	0x00000050	/* The Write Loop is executed 5 times	*/
+#define MBMR_WLFB_6X	0x00000060	/* The Write Loop is executed 6 times	*/
+#define MBMR_WLFB_7X	0x00000070	/* The Write Loop is executed 7 times	*/
+#define MBMR_WLFB_8X	0x00000080	/* The Write Loop is executed 8 times	*/
+#define MBMR_WLFB_9X	0x00000090	/* The Write Loop is executed 9 times	*/
+#define MBMR_WLFB_10X	0x000000A0	/* The Write Loop is executed 10 times	*/
+#define MBMR_WLFB_11X	0x000000B0	/* The Write Loop is executed 11 times	*/
+#define MBMR_WLFB_12X	0x000000C0	/* The Write Loop is executed 12 times	*/
+#define MBMR_WLFB_13X	0x000000D0	/* The Write Loop is executed 13 times	*/
+#define MBMR_WLFB_14X	0x000000E0	/* The Write Loop is executed 14 times	*/
+#define MBMR_WLFB_15X	0x000000F0	/* The Write Loop is executed 15 times	*/
+#define MBMR_WLFB_16X	0x00000000	/* The Write Loop is executed 16 times	*/
+#define MBMR_TLFB_MSK	0x0000000F	/* Timer Loop Field B mask		*/
+#define MBMR_TLFB_1X	0x00000001	/* The Timer Loop is executed 1 time	*/
+#define MBMR_TLFB_2X	0x00000002	/* The Timer Loop is executed 2 times	*/
+#define MBMR_TLFB_3X	0x00000003	/* The Timer Loop is executed 3 times	*/
+#define MBMR_TLFB_4X	0x00000004	/* The Timer Loop is executed 4 times	*/
+#define MBMR_TLFB_5X	0x00000005	/* The Timer Loop is executed 5 times	*/
+#define MBMR_TLFB_6X	0x00000006	/* The Timer Loop is executed 6 times	*/
+#define MBMR_TLFB_7X	0x00000007	/* The Timer Loop is executed 7 times	*/
+#define MBMR_TLFB_8X	0x00000008	/* The Timer Loop is executed 8 times	*/
+#define MBMR_TLFB_9X	0x00000009	/* The Timer Loop is executed 9 times	*/
+#define MBMR_TLFB_10X	0x0000000A	/* The Timer Loop is executed 10 times	*/
+#define MBMR_TLFB_11X	0x0000000B	/* The Timer Loop is executed 11 times	*/
+#define MBMR_TLFB_12X	0x0000000C	/* The Timer Loop is executed 12 times	*/
+#define MBMR_TLFB_13X	0x0000000D	/* The Timer Loop is executed 13 times	*/
+#define MBMR_TLFB_14X	0x0000000E	/* The Timer Loop is executed 14 times	*/
+#define MBMR_TLFB_15X	0x0000000F	/* The Timer Loop is executed 15 times	*/
+#define MBMR_TLFB_16X	0x00000000	/* The Timer Loop is executed 16 times	*/
 
 /*-----------------------------------------------------------------------
  * Timer Global Configuration Register					18-8
  */
 #define TGCR_CAS4	0x8000		/* Cascade Timer 3 and 4	*/
 #define TGCR_FRZ4	0x4000		/* Freeze timer 4		*/
-#define TGCR_STP4	0x2000		/* Stop timer   4		*/
-#define TGCR_RST4	0x1000		/* Reset timer  4		*/
+#define TGCR_STP4	0x2000		/* Stop timer	4		*/
+#define TGCR_RST4	0x1000		/* Reset timer	4		*/
 #define TGCR_GM2	0x0800		/* Gate Mode for Pin 2		*/
 #define TGCR_FRZ3	0x0400		/* Freeze timer 3		*/
-#define TGCR_STP3	0x0200		/* Stop timer   3		*/
-#define TGCR_RST3	0x0100		/* Reset timer  3		*/
+#define TGCR_STP3	0x0200		/* Stop timer	3		*/
+#define TGCR_RST3	0x0100		/* Reset timer	3		*/
 #define TGCR_CAS2	0x0080		/* Cascade Timer 1 and 2	*/
 #define TGCR_FRZ2	0x0040		/* Freeze timer 2		*/
-#define TGCR_STP2	0x0020		/* Stop timer   2		*/
-#define TGCR_RST2	0x0010		/* Reset timer  2		*/
+#define TGCR_STP2	0x0020		/* Stop timer	2		*/
+#define TGCR_RST2	0x0010		/* Reset timer	2		*/
 #define TGCR_GM1	0x0008		/* Gate Mode for Pin 1		*/
 #define TGCR_FRZ1	0x0004		/* Freeze timer 1		*/
-#define TGCR_STP1	0x0002		/* Stop timer   1		*/
-#define TGCR_RST1	0x0001		/* Reset timer  1		*/
+#define TGCR_STP1	0x0002		/* Stop timer	1		*/
+#define TGCR_RST1	0x0001		/* Reset timer	1		*/
 
 
 /*-----------------------------------------------------------------------
  * Timer Mode Register							18-9
  */
-#define TMR_PS_MSK              0xFF00  /* Prescaler Value 			*/
-#define TMR_PS_SHIFT                 8  /* Prescaler position			*/
-#define TMR_CE_MSK              0x00C0  /* Capture Edge and Enable Interrupt	*/
-#define TMR_CE_INTR_DIS         0x0000  /* Disable Interrupt on capture event 	*/
-#define TMR_CE_RISING           0x0040  /* Capture on Rising TINx edge only 	*/
-#define TMR_CE_FALLING          0x0080  /* Capture on Falling TINx edge only 	*/
-#define TMR_CE_ANY              0x00C0  /* Capture on any TINx edge 		*/
-#define TMR_OM                  0x0020  /* Output Mode 				*/
-#define TMR_ORI                 0x0010  /* Output Reference Interrupt Enable	*/
-#define TMR_FRR                 0x0008  /* Free Run/Restart 			*/
-#define TMR_ICLK_MSK            0x0006  /* Timer Input Clock Source mask 	*/
-#define TMR_ICLK_IN_CAS         0x0000  /* Internally cascaded input 		*/
-#define TMR_ICLK_IN_GEN         0x0002  /* Internal General system clock	*/
-#define TMR_ICLK_IN_GEN_DIV16   0x0004  /* Internal General system clk div 16  	*/
-#define TMR_ICLK_TIN_PIN        0x0006  /* TINx pin 				*/
-#define TMR_GE                  0x0001  /* Gate Enable  			*/
+#define TMR_PS_MSK		0xFF00	/* Prescaler Value			*/
+#define TMR_PS_SHIFT		     8	/* Prescaler position			*/
+#define TMR_CE_MSK		0x00C0	/* Capture Edge and Enable Interrupt	*/
+#define TMR_CE_INTR_DIS		0x0000	/* Disable Interrupt on capture event	*/
+#define TMR_CE_RISING		0x0040	/* Capture on Rising TINx edge only	*/
+#define TMR_CE_FALLING		0x0080	/* Capture on Falling TINx edge only	*/
+#define TMR_CE_ANY		0x00C0	/* Capture on any TINx edge		*/
+#define TMR_OM			0x0020	/* Output Mode				*/
+#define TMR_ORI			0x0010	/* Output Reference Interrupt Enable	*/
+#define TMR_FRR			0x0008	/* Free Run/Restart			*/
+#define TMR_ICLK_MSK		0x0006	/* Timer Input Clock Source mask	*/
+#define TMR_ICLK_IN_CAS		0x0000	/* Internally cascaded input		*/
+#define TMR_ICLK_IN_GEN		0x0002	/* Internal General system clock	*/
+#define TMR_ICLK_IN_GEN_DIV16	0x0004	/* Internal General system clk div 16	*/
+#define TMR_ICLK_TIN_PIN	0x0006	/* TINx pin				*/
+#define TMR_GE			0x0001	/* Gate Enable				*/
 
 
 /*-----------------------------------------------------------------------
  * I2C Controller Registers
  */
-#define	I2MOD_REVD		0x20	/* Reverese Data			*/
+#define I2MOD_REVD		0x20	/* Reverese Data			*/
 #define I2MOD_GCD		0x10	/* General Call Disable			*/
 #define I2MOD_FLT		0x08	/* Clock Filter				*/
 #define I2MOD_PDIV32		0x00	/* Pre-Divider 32			*/
 #define I2MOD_PDIV16		0x02	/* Pre-Divider 16			*/
-#define I2MOD_PDIV8		0x04	/* Pre-Divider  8			*/
-#define I2MOD_PDIV4		0x06	/* Pre-Divider  4			*/
+#define I2MOD_PDIV8		0x04	/* Pre-Divider	8			*/
+#define I2MOD_PDIV4		0x06	/* Pre-Divider	4			*/
 #define I2MOD_EN		0x01	/* Enable				*/
 
-#define	I2CER_TXE		0x10	/* Tx Error				*/
+#define I2CER_TXE		0x10	/* Tx Error				*/
 #define I2CER_BSY		0x04	/* Busy Condition			*/
 #define I2CER_TXB		0x02	/* Tx Buffer Transmitted		*/
 #define I2CER_RXB		0x01	/* Rx Buffer Received			*/
@@ -514,7 +535,7 @@
 /*-----------------------------------------------------------------------
  * PCMCIA Interface General Control Register				17-12
  */
-#define	PCMCIA_GCRX_CXRESET	0x00000040
+#define PCMCIA_GCRX_CXRESET	0x00000040
 #define PCMCIA_GCRX_CXOE	0x00000080
 
 #define PCMCIA_VS1(slot)	(0x80000000 >> (slot << 4))
@@ -539,36 +560,36 @@
  *
  * Bank Sizes:
  */
-#define PCMCIA_BSIZE_1		0x00000000	/* Bank size:   1 Bytes	*/
-#define PCMCIA_BSIZE_2		0x08000000	/* Bank size:   2 Bytes	*/
-#define PCMCIA_BSIZE_4		0x18000000	/* Bank size:   4 Bytes	*/
-#define PCMCIA_BSIZE_8		0x10000000	/* Bank size:   8 Bytes	*/
-#define PCMCIA_BSIZE_16		0x30000000	/* Bank size:  16 Bytes	*/
-#define PCMCIA_BSIZE_32		0x38000000	/* Bank size:  32 Bytes	*/
-#define PCMCIA_BSIZE_64		0x28000000	/* Bank size:  64 Bytes	*/
-#define PCMCIA_BSIZE_128	0x20000000	/* Bank size: 128 Bytes	*/
-#define PCMCIA_BSIZE_256	0x60000000	/* Bank size: 256 Bytes	*/
-#define PCMCIA_BSIZE_512	0x68000000	/* Bank size: 512 Bytes	*/
-#define PCMCIA_BSIZE_1K		0x78000000	/* Bank size:   1 kB	*/
-#define PCMCIA_BSIZE_2K		0x70000000	/* Bank size:   2 kB	*/
-#define PCMCIA_BSIZE_4K		0x50000000	/* Bank size:   4 kB	*/
-#define PCMCIA_BSIZE_8K		0x58000000	/* Bank size:   8 kB	*/
+#define PCMCIA_BSIZE_1		0x00000000	/* Bank size:	1 Bytes */
+#define PCMCIA_BSIZE_2		0x08000000	/* Bank size:	2 Bytes */
+#define PCMCIA_BSIZE_4		0x18000000	/* Bank size:	4 Bytes */
+#define PCMCIA_BSIZE_8		0x10000000	/* Bank size:	8 Bytes */
+#define PCMCIA_BSIZE_16		0x30000000	/* Bank size:  16 Bytes */
+#define PCMCIA_BSIZE_32		0x38000000	/* Bank size:  32 Bytes */
+#define PCMCIA_BSIZE_64		0x28000000	/* Bank size:  64 Bytes */
+#define PCMCIA_BSIZE_128	0x20000000	/* Bank size: 128 Bytes */
+#define PCMCIA_BSIZE_256	0x60000000	/* Bank size: 256 Bytes */
+#define PCMCIA_BSIZE_512	0x68000000	/* Bank size: 512 Bytes */
+#define PCMCIA_BSIZE_1K		0x78000000	/* Bank size:	1 kB	*/
+#define PCMCIA_BSIZE_2K		0x70000000	/* Bank size:	2 kB	*/
+#define PCMCIA_BSIZE_4K		0x50000000	/* Bank size:	4 kB	*/
+#define PCMCIA_BSIZE_8K		0x58000000	/* Bank size:	8 kB	*/
 #define PCMCIA_BSIZE_16K	0x48000000	/* Bank size:  16 kB	*/
 #define PCMCIA_BSIZE_32K	0x40000000	/* Bank size:  32 kB	*/
 #define PCMCIA_BSIZE_64K	0xC0000000	/* Bank size:  64 kB	*/
 #define PCMCIA_BSIZE_128K	0xC8000000	/* Bank size: 128 kB	*/
 #define PCMCIA_BSIZE_256K	0xD8000000	/* Bank size: 256 kB	*/
 #define PCMCIA_BSIZE_512K	0xD0000000	/* Bank size: 512 kB	*/
-#define PCMCIA_BSIZE_1M		0xF0000000	/* Bank size:   1 MB	*/
-#define PCMCIA_BSIZE_2M		0xF8000000	/* Bank size:   2 MB	*/
-#define PCMCIA_BSIZE_4M		0xE8000000	/* Bank size:   4 MB	*/
-#define PCMCIA_BSIZE_8M		0xE0000000	/* Bank size:   8 MB	*/
+#define PCMCIA_BSIZE_1M		0xF0000000	/* Bank size:	1 MB	*/
+#define PCMCIA_BSIZE_2M		0xF8000000	/* Bank size:	2 MB	*/
+#define PCMCIA_BSIZE_4M		0xE8000000	/* Bank size:	4 MB	*/
+#define PCMCIA_BSIZE_8M		0xE0000000	/* Bank size:	8 MB	*/
 #define PCMCIA_BSIZE_16M	0xA0000000	/* Bank size:  16 MB	*/
 #define PCMCIA_BSIZE_32M	0xA8000000	/* Bank size:  32 MB	*/
 #define PCMCIA_BSIZE_64M	0xB8000000	/* Bank size:  64 MB	*/
 
 /* PCMCIA Timing */
-#define PCMCIA_SHT(t)	((t & 0x0F)<<16)	/* Strobe Hold  Time 	*/
+#define PCMCIA_SHT(t)	((t & 0x0F)<<16)	/* Strobe Hold	Time	*/
 #define PCMCIA_SST(t)	((t & 0x0F)<<12)	/* Strobe Setup Time	*/
 #define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length	*/
 
@@ -579,10 +600,10 @@
 /* PCMCIA Region Select */
 #define PCMCIA_PRS_MEM		0x00000000	/* Common Memory Space	*/
 #define PCMCIA_PRS_ATTR		0x00000010	/*     Attribute Space	*/
-#define PCMCIA_PRS_IO		0x00000018	/*           I/O Space	*/
-#define PCMCIA_PRS_DMA		0x00000020	/* DMA, normal transfer	*/
+#define PCMCIA_PRS_IO		0x00000018	/*	     I/O Space	*/
+#define PCMCIA_PRS_DMA		0x00000020	/* DMA, normal transfer */
 #define PCMCIA_PRS_DMA_LAST	0x00000028	/* DMA, last transactn	*/
-#define PCMCIA_PRS_CEx		0x00000030	/* A[22:23] ==> CE1,CE2	*/
+#define PCMCIA_PRS_CEx		0x00000030	/* A[22:23] ==> CE1,CE2 */
 
 #define PCMCIA_PSLOT_A		0x00000000	/* Slot A		*/
 #define PCMCIA_PSLOT_B		0x00000004	/* Slot B		*/
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 1609632be1..388b149e0b 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -43,7 +43,7 @@
 #elif defined(CONFIG_ADS)		/* The ADS  board use SLOT_A	*/
 # define CONFIG_PCMCIA_SLOT_A
 #elif defined(CONFIG_FADS)		/* The FADS series are a mess	*/
-# if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821)
+# if defined(CONFIG_MPC86x || defined(CONFIG_MPC821)
 #  define CONFIG_PCMCIA_SLOT_A
 # else
 #  define CONFIG_PCMCIA_SLOT_B
diff --git a/include/version.h b/include/version.h
index fb7411e3ae..e3ce8be3b3 100644
--- a/include/version.h
+++ b/include/version.h
@@ -24,6 +24,6 @@
 #ifndef	__VERSION_H__
 #define	__VERSION_H__
 
-#define	U_BOOT_VERSION	"U-Boot 0.4.4"
+#define	U_BOOT_VERSION	"U-Boot 0.4.5"
 
 #endif	/* __VERSION_H__ */
diff --git a/post/ether.c b/post/ether.c
index 5b42ca76eb..d174ad1c01 100644
--- a/post/ether.c
+++ b/post/ether.c
@@ -130,8 +130,8 @@ CPM_CR_CH_SCC4 };
 			~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 
 #if defined(CONFIG_FADS)
-#if defined(CONFIG_MPC860T)
-	/* The FADS860T doesn't use the MODEM_EN or DATA_VOICE signals. */
+#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC86xADS)
+	/* The FADS860T and MPC86xADS don't use the MODEM_EN or DATA_VOICE signals. */
 	*((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
 	*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
 	*((uint *) BCSR1) &= ~BCSR1_ETHEN;