From: Peng Fan <Peng.Fan@freescale.com>
Date: Tue, 27 Jan 2015 02:14:04 +0000 (+0800)
Subject: imx:mx6 set normal APS and standby PFM mode
X-Git-Tag: v2015.04-rc4~118^2~28
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=258c98f8d36ef35d7cb7604847ba73e64d702c2a;p=u-boot

imx:mx6 set normal APS and standby PFM mode

To normal mode, use APS switching mode.
To standy mode, use PFM switching mode.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
---

diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index a90360f2df..b76e4eb528 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -29,6 +29,7 @@
 #include <asm/arch/crm_regs.h>
 #include <pca953x.h>
 #include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
 #include "../common/pfuze.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -494,11 +495,16 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs)
 int power_init_board(void)
 {
 	struct pmic *p;
+	unsigned int ret;
 
 	p = pfuze_common_init(I2C_PMIC);
 	if (!p)
 		return -ENODEV;
 
+	ret = pfuze_mode_init(p, APS_PFM);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 2f7198d3bf..bb2dd9624b 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -631,12 +631,16 @@ int board_init(void)
 int power_init_board(void)
 {
 	struct pmic *p;
-	unsigned int reg;
+	unsigned int reg, ret;
 
 	p = pfuze_common_init(I2C_PMIC);
 	if (!p)
 		return -ENODEV;
 
+	ret = pfuze_mode_init(p, APS_PFM);
+	if (ret < 0)
+		return ret;
+
 	/* Increase VGEN3 from 2.5 to 2.8V */
 	pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
 	reg &= ~LDO_VOL_MASK;
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index a2c9aae32c..2ff960e3bb 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -199,12 +199,16 @@ static struct i2c_pads_info i2c_pad_info1 = {
 int power_init_board(void)
 {
 	struct pmic *p;
-	unsigned int reg;
+	unsigned int reg, ret;
 
 	p = pfuze_common_init(I2C_PMIC);
 	if (!p)
 		return -ENODEV;
 
+	ret = pfuze_mode_init(p, APS_PFM);
+	if (ret < 0)
+		return ret;
+
 	/* Enable power of VGEN5 3V3, needed for SD3 */
 	pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
 	reg &= ~LDO_VOL_MASK;