From: Peng Fan <peng.fan@nxp.com>
Date: Thu, 19 Oct 2017 03:13:20 +0000 (+0800)
Subject: imx: mx6slevk: cleanup board usb code
X-Git-Tag: v2017.11-rc4~22^2~4
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=27dc324a10de431a58e87abb84b18efea7eb734e;p=u-boot

imx: mx6slevk: cleanup board usb code

Since DM_USB enabled, no need the usb code in board file.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---

diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index 8afd5da49f..0597dbe8be 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -27,8 +27,6 @@
 #include <power/pmic.h>
 #include <power/pfuze100_pmic.h>
 #include "../common/pfuze.h"
-#include <usb.h>
-#include <usb/ehci-ci.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -223,49 +221,6 @@ static int setup_fec(void)
 }
 #endif
 
-#ifdef CONFIG_USB_EHCI_MX6
-#define USB_OTHERREGS_OFFSET	0x800
-#define UCTRL_PWR_POL		(1 << 9)
-
-static iomux_v3_cfg_t const usb_otg_pads[] = {
-	/* OTG1 */
-	MX6_PAD_KEY_COL4__USB_USBOTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(OTGID_PAD_CTRL),
-	/* OTG2 */
-	MX6_PAD_KEY_COL5__USB_USBOTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
-};
-
-static void setup_usb(void)
-{
-	imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
-					 ARRAY_SIZE(usb_otg_pads));
-}
-
-int board_usb_phy_mode(int port)
-{
-	if (port == 1)
-		return USB_INIT_HOST;
-	else
-		return usb_phy_mode(port);
-}
-
-int board_ehci_hcd_init(int port)
-{
-	u32 *usbnc_usb_ctrl;
-
-	if (port > 1)
-		return -EINVAL;
-
-	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
-				 port * 4);
-
-	/* Set Power polarity */
-	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
-
-	return 0;
-}
-#endif
-
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
@@ -287,10 +242,6 @@ int board_init(void)
 	setup_fec();
 #endif
 
-#ifdef CONFIG_USB_EHCI_MX6
-	setup_usb();
-#endif
-
 	return 0;
 }