From: stroese <stroese>
Date: Fri, 12 Sep 2003 08:53:54 +0000 (+0000)
Subject: Update configuration.
X-Git-Tag: LABEL_2006_03_12_0025~768
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2853d29b5232e6cee5f8dd21f769d93dd34ffdcf;p=u-boot

Update configuration.
---

diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index d55b51eb97..492fe49424 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -57,7 +57,7 @@
 #undef	CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND	"bootm 100000"	/* default boot command	*/
 
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef  CONFIG_LOADS_ECHO		/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #define CONFIG_MII		1	/* MII PHY management		*/
@@ -228,44 +228,34 @@
 #define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
 #define CFG_JFFS2_NUM_BANKS     1           /* ! second bank contains U-Boot */
 
-#if 0 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
- * NVRAM organization
+ * I2C EEPROM (CAT24WC32) for environment
  */
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-#define CFG_ENV_SIZE		0x0ff8		/* Size of Environment vars	*/
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CFG_ENV_SIZE+8))	/* Env	*/
+#define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
 
-#else /* Use EEPROM for environment variables */
+#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
+#define CFG_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
+/* mask of address bits that overflow into the "EEPROM chip address"    */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x01
+#define CFG_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
+					/* 32 byte page write mode using*/
+					/* last	5 bits of the address	*/
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/* Use EEPROM for environment variables */
 
 #define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE            0x400   /* 1024 bytes may be used for env vars*/
-				   /* total size of a CAT24WC08 is 1024 bytes */
-#endif
+#define CFG_ENV_SIZE            0x800   /* 2048 bytes may be used for env vars*/
+				   /* total size of a CAT24WC32 is 4096 bytes */
 
 #define CFG_NVRAM_BASE_ADDR	0xf0200000		/* NVRAM base address	*/
 #define CFG_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
 #define CFG_NVRAM_VXWORKS_OFFS	0x6900		/* Offset for VxWorks eth-addr	*/
 
-/*-----------------------------------------------------------------------
- * I2C EEPROM (CAT24WC08) for environment
- */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_SLAVE		0x7F
-
-#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
-					/* 16 byte page write mode using*/
-					/* last	4 bits of the address	*/
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 8ab253a35e..9cd8f5a32d 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -133,6 +133,8 @@
 
 #undef CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
+#define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 54b53bc71f..35d49fcec8 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -63,6 +63,7 @@
 #define	CONFIG_PHY_ADDR		0	/* PHY address			*/
 
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_BSP	| \
 				CFG_CMD_PCI	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_ELF	| \
@@ -254,6 +255,19 @@
 #define CFG_EBC_PB3AP   0x010059C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 #define CFG_EBC_PB3CR   CF_BA | 0x1A000     /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ */
+#define CFG_FPGA_XC95XL         1           /* using Xilinx XC95XL CPLD      */
+#define CFG_FPGA_MAX_SIZE       32*1024     /* 32kByte is enough for CPLD    */
+
+/* FPGA program pin configuration */
+#define CFG_FPGA_PRG            0x04000000  /* JTAG TMS pin (ppc output)     */
+#define CFG_FPGA_CLK            0x02000000  /* JTAG TCK pin (ppc output)     */
+#define CFG_FPGA_DATA           0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
+#define CFG_FPGA_INIT           0x00010000  /* unused (ppc input)            */
+#define CFG_FPGA_DONE           0x00008000  /* JTAG TDI->TDO pin (ppc input) */
+
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */