From: Bernie Thompson Date: Mon, 15 Apr 2013 17:34:34 +0000 (-0700) Subject: exynos: Adjust the starting MIF voltage to 1.05v X-Git-Tag: v2013.07-rc3~4^2~6^2~15 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2955d600155f79d90c40c4d7ee6a0a52dda7bc32;p=u-boot exynos: Adjust the starting MIF voltage to 1.05v Some Exynos5250 silicon may require 1.05v on the MIF to be stable, so to be safe we can default to 1.05v instead of 1.00v. This can be set optimally later in the boot process by the kernel. The 0x6 value for 1.05v comes from the MAX77686 datasheet. Signed-off-by: Bernie Thompson Acked-by: Simon Glass Signed-off-by: Minkyu Kang --- diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 276fd41328..ae1f077c4c 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -144,7 +144,7 @@ int power_init_board(void) /* VDD_MIF */ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT, - MAX77686_BUCK1OUT_1V)) { + MAX77686_BUCK1OUT_1_05V)) { debug("%s: PMIC %d register write failed\n", __func__, MAX77686_REG_PMIC_BUCK1OUT); return -1; diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h index fdc7ca9e5a..1c374a9034 100644 --- a/include/power/max77686_pmic.h +++ b/include/power/max77686_pmic.h @@ -157,6 +157,8 @@ enum { /* Buck1 1 volt value */ #define MAX77686_BUCK1OUT_1V 0x5 +/* Buck1 1.05 volt value */ +#define MAX77686_BUCK1OUT_1_05V 0x6 #define MAX77686_BUCK1CTRL_EN (3 << 0) /* Buck2 1.3 volt value */ #define MAX77686_BUCK2DVS1_1_3V 0x38