From: mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Sat, 23 May 2009 18:26:06 +0000 (+0000)
Subject: Change the setting for the sam7se512 and sam7x256
X-Git-Tag: v0.2.0~620
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2a6c215c451a7efbba8e89196ae517aa556d0a52;p=openocd

Change the setting for the sam7se512 and sam7x256
flash driver because of the new at91sam7 version.

git-svn-id: svn://svn.berlios.de/openocd/trunk@1890 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---

diff --git a/src/target/target/sam7se512.cfg b/src/target/target/sam7se512.cfg
index a3104058..6f0aa38c 100644
--- a/src/target/target/sam7se512.cfg
+++ b/src/target/target/sam7se512.cfg
@@ -34,5 +34,6 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
 
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
 
-flash bank at91sam7 0 0 0 0 0
+#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
+flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
 
diff --git a/src/target/target/sam7x256.cfg b/src/target/target/sam7x256.cfg
index 8e8cc97a..789f7dd6 100644
--- a/src/target/target/sam7x256.cfg
+++ b/src/target/target/sam7x256.cfg
@@ -45,8 +45,8 @@ $_TARGETNAME configure -event reset-init {
 
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
 
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank at91sam7 0 0 0 0 0
+#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
+flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
 
 # For more information about the configuration files, take a look at:
 # openocd.texi