From: Stefan Roese Date: Wed, 1 Jul 2015 11:23:52 +0000 (+0200) Subject: arm: mvebu: Flush caches and disable MMU only on A38x X-Git-Tag: v2015.10-rc2~1^2~12 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2b181b5b0427fb2d7efd12c1c04fc3eb5ce953d6;p=u-boot arm: mvebu: Flush caches and disable MMU only on A38x Only with disabled MMU its possible to switch the base register address on Armada 38x. Without this the SDRAM located at >= 0x4000.0000 is also not accessible, as its still locked to cache. So to fully release / unlock this area from cache, we need to first flush all caches, then disable the MMU and disable the L2 cache. On Armada XP this does not seem to be needed. Even worse, with this code added, I sometimes see strange input charactes loss from the console. Signed-off-by: Stefan Roese Cc: Luka Perkov --- diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 7335620f2b..23c2a9782f 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -183,13 +183,25 @@ static void set_cbar(u32 addr) int arch_cpu_init(void) { #ifndef CONFIG_SPL_BUILD - /* - * Only with disabled MMU its possible to switch the base - * register address on Armada 38x. Without this the SDRAM - * located at >= 0x4000.0000 is also not accessible, as its - * still locked to cache. - */ - mmu_disable(); + if (mvebu_soc_family() == MVEBU_SOC_A38X) { + struct pl310_regs *const pl310 = + (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + + /* + * Only with disabled MMU its possible to switch the base + * register address on Armada 38x. Without this the SDRAM + * located at >= 0x4000.0000 is also not accessible, as its + * still locked to cache. + * + * So to fully release / unlock this area from cache, we need + * to first flush all caches, then disable the MMU and + * disable the L2 cache. + */ + icache_disable(); + dcache_disable(); + mmu_disable(); + clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); + } #endif /* Linux expects the internal registers to be at 0xf1000000 */