From: Vladimir Zapolskiy Date: Sun, 1 Dec 2013 18:07:28 +0000 (+0200) Subject: kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX X-Git-Tag: v2014.01-rc2~36 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2c808a12ea7e00d5078e57a9640adcb0504c739c;p=u-boot kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX The last users of CONFIG_KGDB_SER_INDEX were removed more than 3 years ago in commits 550650ddd0 and bf16500f79, either kgdb subsystem should care about this parameter or it should be gone completely. Signed-off-by: Vladimir Zapolskiy --- diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index b2a5c19e0e..3c6cd61342 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -737,7 +737,6 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 499d8c2054..4aed5afa37 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -382,7 +382,6 @@ extern unsigned long get_sdram_size(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #define CONFIG_USB_EHCI diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index a6601fee86..f025e3197b 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -625,7 +625,6 @@ combinations. this should be removed later #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 2d7fc59ea2..71be1224f1 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -406,7 +406,6 @@ int du440_phy_addr(int devnum); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #define CONFIG_SOURCE 1 diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h index f366308f45..208b599f6d 100644 --- a/include/configs/EXBITGEN.h +++ b/include/configs/EXBITGEN.h @@ -186,6 +186,5 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #endif /* __CONFIG_H */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 4284d6a3a9..5738ea97ad 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -274,6 +274,5 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #endif /* __CONFIG_H */ diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 71e90d77d7..39eb2ef133 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -273,7 +273,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ -#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 32ec0bf065..67154353d3 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -338,7 +338,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ -#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index f248a56421..6042a1e3c4 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -396,7 +396,6 @@ ************************************************************/ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /************************************************************ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 0f9f436e33..aedb529f86 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -634,7 +634,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index a1e5f3b2b2..c4c771b502 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -481,7 +481,6 @@ #if (CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 71fc497e78..f5b62025d6 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -574,7 +574,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 037484104f..7640d06ee7 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -737,7 +737,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index e2ae596323..ffb9a158ae 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -730,7 +730,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index ed780f17ff..d4c82cd669 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -683,7 +683,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index d31be19735..01e7ac7681 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -544,7 +544,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 98ffb9c29e..f52e77a3a7 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -662,7 +662,6 @@ extern int board_pci_host_broken(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index ca28c0eb24..938f7ab3c4 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -678,7 +678,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 9ab1bc106b..9b7cc6474c 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -740,7 +740,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 046b14bdda..2d42b25121 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -397,7 +397,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index eca3b537b4..b9ad034225 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -410,7 +410,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 8132ec055b..90fc2da34b 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -441,7 +441,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 6acd54db85..5fff1e2cac 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -535,7 +535,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 5ffdd01629..23c6b07c35 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -408,7 +408,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index bb9ae2dcb5..44b767919e 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -438,7 +438,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 7406ac3be8..4f438a8075 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -430,7 +430,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index df5572b3a8..d877e8bbd1 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -566,7 +566,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 63480ecb0d..44d83a236e 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -682,7 +682,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 41ebe31dd4..f930fcde34 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -517,7 +517,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 0e666bac01..65d61c28d1 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -670,7 +670,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ - #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 1ed5e1df21..fe5309a227 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -739,7 +739,6 @@ extern unsigned long get_sdram_size(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 262c3e5f1f..ba43ccec60 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -725,7 +725,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index 2aa1f59ea7..11c74ff5f5 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -469,7 +469,6 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index b592c1966a..85cb0767ef 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -606,7 +606,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h index 15d2a43cd0..ce3c762559 100644 --- a/include/configs/P2020COME.h +++ b/include/configs/P2020COME.h @@ -432,7 +432,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 9d3d9b33e5..ada6c7b871 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -670,7 +670,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index b238574b5d..ee71252b00 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -677,7 +677,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 1180724862..29888b4e1c 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -353,7 +353,6 @@ ************************************************************/ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /************************************************************ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 5ab9315b1d..efe69601f3 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -492,7 +492,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* pass open firmware flat tree */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 43a5778004..d0ebd6aba8 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -682,7 +682,6 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index 79312311d8..d721139a1f 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -609,7 +609,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index eff08e3804..2c02d9da58 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -613,7 +613,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index fc254256a0..15cf2bd793 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -495,7 +495,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 57b620d481..d40185e1e2 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -138,8 +138,6 @@ #if defined(CONFIG_CMD_KGDB) /* speed to run kgdb serial port */ #define CONFIG_KGDB_BAUDRATE 115200 -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* Miscellaneous configurable options */ diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 8fda1b1ea5..00a24ab846 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -301,7 +301,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 6836fc7b5f..8ed2fa2d87 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -304,7 +304,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index 1205557d88..d6cef888c6 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -471,7 +471,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/actux1.h b/include/configs/actux1.h index 3315f54f38..9b8bd78943 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -58,8 +58,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/actux2.h b/include/configs/actux2.h index fb391ecd59..f0cbff79ca 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -51,8 +51,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/actux3.h b/include/configs/actux3.h index 61d96f5ed0..763910745c 100644 --- a/include/configs/actux3.h +++ b/include/configs/actux3.h @@ -49,8 +49,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/actux4.h b/include/configs/actux4.h index 23872794e3..12bd98a7e1 100644 --- a/include/configs/actux4.h +++ b/include/configs/actux4.h @@ -56,8 +56,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 61fdebac3f..08bba36095 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -349,7 +349,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* pass open firmware flat tree */ diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index c9e9a038d4..0f38c92fa0 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -125,7 +125,6 @@ */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/aria.h b/include/configs/aria.h index 32216cd50e..b8d955abd0 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -507,7 +507,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index 12df45b0fa..8b2a6cf11d 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -61,7 +61,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 556b42a38b..d1d732f211 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -204,7 +204,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 -#define CONFIG_KGDB_SER_INDEX 2 #endif /* diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 665295c1a2..969b9903fb 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -672,7 +672,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/csb272.h b/include/configs/csb272.h index ca0bffa72e..8a848bea8b 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -99,7 +99,6 @@ */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 596095d21f..5c034175ce 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -98,7 +98,6 @@ */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h index 87b3314841..1af7f16989 100644 --- a/include/configs/dvlhost.h +++ b/include/configs/dvlhost.h @@ -57,8 +57,6 @@ #if defined(CONFIG_CMD_KGDB) # define CONFIG_KGDB_BAUDRATE 230400 -/* which serial port to use */ -# define CONFIG_KGDB_SER_INDEX 1 #endif /* Miscellaneous configurable options */ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 7700b38c2d..50330ccf6e 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -385,7 +385,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #define __USB_PHY_TYPE utmi diff --git a/include/configs/korat.h b/include/configs/korat.h index b09af199c8..811ff995e2 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -542,7 +542,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* Pass open firmware flat tree */ diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h index 68e1a974dd..379c786bc4 100644 --- a/include/configs/lp8x4x.h +++ b/include/configs/lp8x4x.h @@ -93,7 +93,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index b87df5479d..4ffe165dec 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -86,7 +86,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index c348329cb1..e9c8d8fd55 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -660,7 +660,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 6501ea40e1..d415ecdb5a 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -364,7 +364,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 4a8adf6f33..38337b4564 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -520,7 +520,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h index ec09e15dbf..4cac8ee46a 100644 --- a/include/configs/mpq101.h +++ b/include/configs/mpq101.h @@ -345,7 +345,6 @@ #ifdef CONFIG_CMD_KGDB # define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -# define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index c15d54631a..12667c57c1 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -86,8 +86,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ - /* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif /* diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index c48790d2ae..376dfdb14c 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -94,7 +94,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif /* diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 57ed019952..c6df11b8f1 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -928,7 +928,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 3fde7ca3a3..1fdd602f5b 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -303,6 +303,5 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif #endif /* __CONFIG_H */ diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 84bc9ed813..ae4dd75499 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -93,7 +93,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 661101ccb6..1f94f0c0d6 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -95,7 +95,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h index adf85190d1..36626639d3 100644 --- a/include/configs/palmtreo680.h +++ b/include/configs/palmtreo680.h @@ -94,7 +94,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 400cb3e826..5a5fe7ff00 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -427,7 +427,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 266d107e44..2a54e5cea0 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -441,7 +441,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* POST support */ diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h index 5856ee180b..f0ecc34587 100644 --- a/include/configs/pxa-common.h +++ b/include/configs/pxa-common.h @@ -16,7 +16,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 -#define CONFIG_KGDB_SER_INDEX 2 #endif /* diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 84ad006acd..af7c076df0 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -199,7 +199,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index 7b04e0c3e3..20d6178dc1 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -265,7 +265,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* ENVIRONMENT VARS */ diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index f144f84320..92318c3394 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -121,7 +121,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index a258fe83dd..b7f83e0105 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -643,7 +643,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index bdb8eb529d..4912d69dcf 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -575,7 +575,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index dba948a5ce..78f8219c5f 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -523,7 +523,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index a87444e0b1..d4ae19f96c 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -101,8 +101,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 0e6b86412d..fd590e4e12 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -363,7 +363,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index ee1f1f3ed0..2a9c9a349c 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -341,7 +341,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /*Note: change below for your network setting!!! */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 63dd767047..d0cb68a0ed 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -376,7 +376,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /*Note: change below for your network setting!!! */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index d9b0ed07d6..54a5e3e260 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -303,7 +303,6 @@ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index 0615117773..b7804d2872 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -125,7 +125,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 734d13f005..7ecbafe2e5 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -539,7 +539,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index c3ac612a8c..71a89b6edd 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -124,7 +124,6 @@ */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 431ed96e29..2999d1b0f5 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -84,7 +84,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif /* diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 9d58738ce8..d8aeb3794e 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -283,7 +283,6 @@ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 52a745e604..f9ccca75d6 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -117,7 +117,6 @@ unsigned char zipitz2_spi_read(void); */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /*