From: Stephen Tridgell Date: Wed, 25 Feb 2015 08:18:27 +0000 (+1100) Subject: ftdi: Added a method to read the signal values X-Git-Tag: v0.10.0-rc1~113 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=2cc1c6daf2a8eea3c4bbda653cf1741afb270644;p=openocd ftdi: Added a method to read the signal values Change-Id: Ie32a372bbc57249b4802d900234a0e8e7d1d1830 Signed-off-by: Stephen Tridgell Reviewed-on: http://openocd.zylin.com/2556 Reviewed-by: Andreas Fritiofson Tested-by: jenkins --- diff --git a/doc/openocd.texi b/doc/openocd.texi index a03251a3..1632e426 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2515,7 +2515,8 @@ The driver uses a signal abstraction to enable Tcl configuration files to define outputs for one or several FTDI GPIO. These outputs can then be controlled using the @command{ftdi_set_signal} command. Special signal names are reserved for nTRST, nSRST and LED (for blink) so that they, if defined, -will be used for their customary purpose. +will be used for their customary purpose. Inputs can be read using the +@command{ftdi_get_signal} command. Depending on the type of buffer attached to the FTDI GPIO, the outputs have to be controlled differently. In order to support tristateable signals such as @@ -2582,7 +2583,7 @@ minimal impact on the target system. Avoid floating inputs, conflicting outputs and initially asserted reset signals. @end deffn -@deffn {Config Command} {ftdi_layout_signal} name [@option{-data}|@option{-ndata} data_mask] [@option{-oe}|@option{-noe} oe_mask] [@option{-alias}|@option{-nalias} name] +@deffn {Config Command} {ftdi_layout_signal} name [@option{-data}|@option{-ndata} data_mask] [@option{-input}|@option{-ninput} input_mask] [@option{-oe}|@option{-noe} oe_mask] [@option{-alias}|@option{-nalias} name] Creates a signal with the specified @var{name}, controlled by one or more FTDI GPIO pins via a range of possible buffer connections. The masks are FTDI GPIO register bitmasks to tell the driver the connection and type of the output @@ -2590,7 +2591,9 @@ buffer driving the respective signal. @var{data_mask} is the bitmask for the pin(s) connected to the data input of the output buffer. @option{-ndata} is used with inverting data inputs and @option{-data} with non-inverting inputs. The @option{-oe} (or @option{-noe}) option tells where the output-enable (or -not-output-enable) input to the output buffer is connected. +not-output-enable) input to the output buffer is connected. The options +@option{-input} and @option{-ninput} specify the bitmask for pins to be read +with the method @command{ftdi_get_signal}. Both @var{data_mask} and @var{oe_mask} need not be specified. For example, a simple open-collector transistor driver would be specified with @option{-oe} @@ -2620,6 +2623,10 @@ Set a previously defined signal to the specified level. @end itemize @end deffn +@deffn {Command} {ftdi_get_signal} name +Get the value of a previously defined signal. +@end deffn + @deffn {Command} {ftdi_tdo_sample_edge} @option{rising}|@option{falling} Configure TCK edge at which the adapter samples the value of the TDO signal diff --git a/src/jtag/drivers/ftdi.c b/src/jtag/drivers/ftdi.c index 8f47468b..00fe37fa 100644 --- a/src/jtag/drivers/ftdi.c +++ b/src/jtag/drivers/ftdi.c @@ -105,8 +105,10 @@ static struct mpsse_ctx *mpsse_ctx; struct signal { const char *name; uint16_t data_mask; + uint16_t input_mask; uint16_t oe_mask; bool invert_data; + bool invert_input; bool invert_oe; struct signal *next; }; @@ -211,6 +213,32 @@ static int ftdi_set_signal(const struct signal *s, char value) return ERROR_OK; } +static int ftdi_get_signal(const struct signal *s, uint16_t * value_out) +{ + uint8_t data_low = 0; + uint8_t data_high = 0; + + if (s->input_mask == 0) { + LOG_ERROR("interface doesn't provide signal '%s'", s->name); + return ERROR_FAIL; + } + + if (s->input_mask & 0xff) + mpsse_read_data_bits_low_byte(mpsse_ctx, &data_low); + if (s->input_mask >> 8) + mpsse_read_data_bits_high_byte(mpsse_ctx, &data_high); + + mpsse_flush(mpsse_ctx); + + *value_out = (((uint16_t)data_high) << 8) | data_low; + + if (s->invert_input) + *value_out = ~(*value_out); + + *value_out &= s->input_mask; + + return ERROR_OK; +} /** * Function move_to_state @@ -740,6 +768,8 @@ COMMAND_HANDLER(ftdi_handle_layout_signal_command) bool invert_data = false; uint16_t data_mask = 0; + bool invert_input = false; + uint16_t input_mask = 0; bool invert_oe = false; uint16_t oe_mask = 0; for (unsigned i = 1; i < CMD_ARGC; i += 2) { @@ -749,6 +779,12 @@ COMMAND_HANDLER(ftdi_handle_layout_signal_command) } else if (strcmp("-ndata", CMD_ARGV[i]) == 0) { invert_data = true; COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], data_mask); + } else if (strcmp("-input", CMD_ARGV[i]) == 0) { + invert_input = false; + COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], input_mask); + } else if (strcmp("-ninput", CMD_ARGV[i]) == 0) { + invert_input = true; + COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], input_mask); } else if (strcmp("-oe", CMD_ARGV[i]) == 0) { invert_oe = false; COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], oe_mask); @@ -757,15 +793,19 @@ COMMAND_HANDLER(ftdi_handle_layout_signal_command) COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], oe_mask); } else if (!strcmp("-alias", CMD_ARGV[i]) || !strcmp("-nalias", CMD_ARGV[i])) { - if (!strcmp("-nalias", CMD_ARGV[i])) + if (!strcmp("-nalias", CMD_ARGV[i])) { invert_data = true; + invert_input = true; + } struct signal *sig = find_signal_by_name(CMD_ARGV[i + 1]); if (!sig) { LOG_ERROR("signal %s is not defined", CMD_ARGV[i + 1]); return ERROR_FAIL; } data_mask = sig->data_mask; + input_mask = sig->input_mask; oe_mask = sig->oe_mask; + invert_input ^= sig->invert_input; invert_oe = sig->invert_oe; invert_data ^= sig->invert_data; } else { @@ -785,6 +825,8 @@ COMMAND_HANDLER(ftdi_handle_layout_signal_command) sig->invert_data = invert_data; sig->data_mask = data_mask; + sig->invert_input = invert_input; + sig->input_mask = input_mask; sig->invert_oe = invert_oe; sig->oe_mask = oe_mask; @@ -821,6 +863,28 @@ COMMAND_HANDLER(ftdi_handle_set_signal_command) return mpsse_flush(mpsse_ctx); } +COMMAND_HANDLER(ftdi_handle_get_signal_command) +{ + if (CMD_ARGC < 1) + return ERROR_COMMAND_SYNTAX_ERROR; + + struct signal *sig; + uint16_t sig_data = 0; + sig = find_signal_by_name(CMD_ARGV[0]); + if (!sig) { + LOG_ERROR("interface configuration doesn't define signal '%s'", CMD_ARGV[0]); + return ERROR_FAIL; + } + + int ret = ftdi_get_signal(sig, &sig_data); + if (ret != ERROR_OK) + return ret; + + LOG_USER("Signal %s = %#06x", sig->name, sig_data); + + return ERROR_OK; +} + COMMAND_HANDLER(ftdi_handle_vid_pid_command) { if (CMD_ARGC > MAX_USB_IDS * 2) { @@ -928,6 +992,13 @@ static const struct command_registration ftdi_command_handlers[] = { .help = "control a layout-specific signal", .usage = "name (1|0|z)", }, + { + .name = "ftdi_get_signal", + .handler = &ftdi_handle_get_signal_command, + .mode = COMMAND_EXEC, + .help = "read the value of a layout-specific signal", + .usage = "name", + }, { .name = "ftdi_vid_pid", .handler = &ftdi_handle_vid_pid_command,